ARM: dts: Move .dts files to vendor sub-directories

The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 226 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
new file mode 100644
index 000000000000..46c5383f0eee
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/am57-pruss.dtsi
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Common PRUSS data for TI AM57xx platforms
+ */
+
+&ocp {
+	pruss1_tm: target-module@4b226000 {
+		compatible = "ti,sysc-pruss", "ti,sysc";
+		reg = <0x4b226000 0x4>,
+		      <0x4b226004 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+				 SYSC_PRUSS_SUB_MWAIT)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x4b200000 0x80000>;
+
+		pruss1: pruss@0 {
+			compatible = "ti,am5728-pruss";
+			reg = <0x0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pruss1_mem: memories@0 {
+				reg = <0x0 0x2000>,
+				      <0x2000 0x2000>,
+				      <0x10000 0x8000>;
+				reg-names = "dram0", "dram1",
+					    "shrdram2";
+			};
+
+			pruss1_cfg: cfg@26000 {
+				compatible = "ti,pruss-cfg", "syscon";
+				reg = <0x26000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x26000 0x2000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pruss1_iepclk_mux: iepclk-mux@30 {
+						reg = <0x30>;
+						#clock-cells = <0>;
+						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
+							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
+					};
+				};
+			};
+
+			pruss1_mii_rt: mii-rt@32000 {
+				compatible = "ti,pruss-mii", "syscon";
+				reg = <0x32000 0x58>;
+			};
+
+			pruss1_intc: interrupt-controller@20000 {
+				compatible = "ti,pruss-intc";
+				reg = <0x20000 0x2000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "host_intr0", "host_intr1",
+						  "host_intr2", "host_intr3",
+						  "host_intr4", "host_intr5",
+						  "host_intr6", "host_intr7";
+			};
+
+			pru1_0: pru@34000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x34000 0x3000>,
+				      <0x22000 0x400>,
+				      <0x22400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru1_0-fw";
+			};
+
+			pru1_1: pru@38000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x38000 0x3000>,
+				      <0x24000 0x400>,
+				      <0x24400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru1_1-fw";
+			};
+
+			pruss1_mdio: mdio@32400 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&dpll_gmac_h13x2_ck>;
+				clock-names = "fck";
+				bus_freq = <1000000>;
+				reg = <0x32400 0x90>;
+			};
+		};
+	};
+
+	pruss2_tm: target-module@4b2a6000 {
+		compatible = "ti,sysc-pruss", "ti,sysc";
+		reg = <0x4b2a6000 0x4>,
+		      <0x4b2a6004 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+				 SYSC_PRUSS_SUB_MWAIT)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x4b280000 0x80000>;
+
+		pruss2: pruss@0 {
+			compatible = "ti,am5728-pruss";
+			reg = <0x0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pruss2_mem: memories@0 {
+				reg = <0x0 0x2000>,
+				      <0x2000 0x2000>,
+				      <0x10000 0x8000>;
+				reg-names = "dram0", "dram1",
+					    "shrdram2";
+			};
+
+			pruss2_cfg: cfg@26000 {
+				compatible = "ti,pruss-cfg", "syscon";
+				reg = <0x26000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x26000 0x2000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pruss2_iepclk_mux: iepclk-mux@30 {
+						reg = <0x30>;
+						#clock-cells = <0>;
+						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
+							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
+					};
+				};
+			};
+
+			pruss2_mii_rt: mii-rt@32000 {
+				compatible = "ti,pruss-mii", "syscon";
+				reg = <0x32000 0x58>;
+			};
+
+			pruss2_intc: interrupt-controller@20000 {
+				compatible = "ti,pruss-intc";
+				reg = <0x20000 0x2000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "host_intr0", "host_intr1",
+						  "host_intr2", "host_intr3",
+						  "host_intr4", "host_intr5",
+						  "host_intr6", "host_intr7";
+			};
+
+			pru2_0: pru@34000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x34000 0x3000>,
+				      <0x22000 0x400>,
+				      <0x22400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru2_0-fw";
+			};
+
+			pru2_1: pru@38000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x38000 0x3000>,
+				      <0x24000 0x400>,
+				      <0x24400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru2_1-fw";
+			};
+
+			pruss2_mdio: mdio@32400 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&dpll_gmac_h13x2_ck>;
+				clock-names = "fck";
+				bus_freq = <1000000>;
+				reg = <0x32400 0x90>;
+			};
+		};
+	};
+};