Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...

5 files changed, 210 insertions, 21 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 7979420bd48b..ccd7e80ce943 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -153,7 +153,6 @@ config HAVE_AT91_USB_CLK
 
 config COMMON_CLK_AT91
 	bool
-	select COMMON_CLK
 	select MFD_SYSCON
 
 config HAVE_AT91_SMD
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 374b9d155558..074bde64064e 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -736,13 +736,36 @@ backup_default:
 
 struct pmc_info {
 	unsigned long uhp_udp_mask;
+	unsigned long mckr;
+	unsigned long version;
 };
 
 static const struct pmc_info pmc_infos[] __initconst = {
-	{ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
-	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
-	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP },
-	{ .uhp_udp_mask = 0 },
+	{
+		.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{	.uhp_udp_mask = 0,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+	},
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -757,7 +780,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
-	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
 	{ /* sentinel */ },
 };
 
@@ -779,6 +802,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 	pmc = of_id->data;
 	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
+	soc_pm.data.pmc_mckr_offset = pmc->mckr;
+	soc_pm.data.pmc_version = pmc->version;
 
 	if (pm_idle)
 		arm_pm_idle = pm_idle;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 9fa4f483f2b5..218e8d1a30fb 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -33,6 +33,8 @@ struct at91_pm_data {
 	void __iomem *sfrbu;
 	unsigned int standby_mode;
 	unsigned int suspend_mode;
+	unsigned int pmc_mckr_offset;
+	unsigned int pmc_version;
 };
 #endif
 
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index f2d893c03cd9..82089ff258c0 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -12,6 +12,10 @@ int main(void)
 	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
 	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
 	DEFINE(PM_DATA_SFRBU,		offsetof(struct at91_pm_data, sfrbu));
+	DEFINE(PM_DATA_PMC_MCKR_OFFSET,	offsetof(struct at91_pm_data,
+						 pmc_mckr_offset));
+	DEFINE(PM_DATA_PMC_VERSION,	offsetof(struct at91_pm_data,
+						 pmc_version));
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index ed57c879d4e1..be9764e8d3fa 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -18,6 +18,7 @@
 pmc	.req	r0
 tmp1	.req	r4
 tmp2	.req	r5
+tmp3	.req	r6
 
 /*
  * Wait until master clock is ready (after switching master clock source)
@@ -93,13 +94,17 @@ ENTRY(at91_pm_suspend_in_sram)
 	str	tmp1, .memtype
 	ldr	tmp1, [r0, #PM_DATA_MODE]
 	str	tmp1, .pm_mode
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+	str	tmp1, .mckr_offset
+	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
+	str	tmp1, .pmc_version
 	/* Both ldrne below are here to preload their address in the TLB */
 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
 	str	tmp1, .shdwc
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0]
 	ldr	tmp1, [r0, #PM_DATA_SFRBU]
-	str	tmp1, .sfr
+	str	tmp1, .sfrbu
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0x10]
 
@@ -138,14 +143,15 @@ ENDPROC(at91_pm_suspend_in_sram)
 ENTRY(at91_backup_mode)
 	/* Switch the master clock source to slow clock. */
 	ldr	pmc, .pmc_base
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp2, .mckr_offset
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
 	/*BUMEN*/
-	ldr	r0, .sfr
+	ldr	r0, .sfrbu
 	mov	tmp1, #0x1
 	str	tmp1, [r0, #0x10]
 
@@ -218,6 +224,7 @@ ENDPROC(at91_backup_mode)
  */
 .macro at91_pm_ulp1_mode
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
 
 	/* Save RC oscillator state and check if it is enabled. */
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
@@ -254,10 +261,10 @@ ENDPROC(at91_backup_mode)
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	/* Switch the master clock source to main clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -268,6 +275,10 @@ ENDPROC(at91_backup_mode)
 	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
+	/* Quirk for SAM9X60's PMC */
+	nop
+	nop
+
 	wait_mckrdy
 
 	/* Enable the crystal oscillator */
@@ -280,9 +291,9 @@ ENDPROC(at91_backup_mode)
 	wait_moscrdy
 
 	/* Switch the master clock source to slow clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -296,10 +307,10 @@ ENDPROC(at91_backup_mode)
 	wait_moscsels
 
 	/* Switch the master clock source to main clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -323,21 +334,160 @@ ENDPROC(at91_backup_mode)
 3:
 .endm
 
+.macro at91_plla_disable
+	/* Save PLLA setting and disable it */
+	ldr	tmp1, .pmc_version
+	cmp	tmp1, #AT91_PMC_V1
+	beq	1f
+
+#ifdef CONFIG_SOC_SAM9X60
+	/* Save PLLA settings. */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
+	str	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* save div. */
+	mov	tmp1, #0
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp2, tmp2, #0xffffff00
+	orr	tmp1, tmp1, tmp2
+
+	/* save mul. */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL1]
+	bic	tmp2, tmp2, #0xffffff
+	orr	tmp1, tmp1, tmp2
+	str	tmp1, .saved_pllar
+
+	/* step 2. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 3. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 4. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 5. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 7. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	b	2f
+#endif
+
+1:	/* Save PLLA setting and disable it */
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
+
+	/* Disable PLLA. */
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+2:
+.endm
+
+.macro at91_plla_enable
+	ldr	tmp2, .saved_pllar
+	ldr	tmp3, .pmc_version
+	cmp	tmp3, #AT91_PMC_V1
+	beq	4f
+
+#ifdef CONFIG_SOC_SAM9X60
+	/* step 1. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 2. */
+	ldr	tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
+
+	/* step 3. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+	mov	tmp3, tmp2
+	bic	tmp3, tmp3, #0xffffff
+	orr	tmp1, tmp1, tmp3
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+
+	/* step 8. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 9. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENLOCK
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+	bic	tmp1, tmp1, #0xff
+	mov	tmp3, tmp2
+	bic	tmp3, tmp3, #0xffffff00
+	orr	tmp1, tmp1, tmp3
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 10. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 11. */
+3:	ldr	tmp1, [pmc, #AT91_PMC_PLL_ISR0]
+	tst	tmp1, #0x1
+	beq	3b
+	b	2f
+#endif
+
+	/* Restore PLLA setting */
+4:	str	tmp2, [pmc, #AT91_CKGR_PLLAR]
+
+	/* Enable PLLA. */
+	tst	tmp2, #(AT91_PMC_MUL &  0xff0000)
+	bne	1f
+	tst	tmp2, #(AT91_PMC_MUL & ~0xff0000)
+	beq	2f
+
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
+	beq	1b
+2:
+.endm
+
 ENTRY(at91_ulp_mode)
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
 
 	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	str	tmp1, .saved_mckr
 
 	/*
 	 * Set the Master clock source to slow clock
 	 */
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
+	at91_plla_disable
+
 	ldr	r0, .pm_mode
 	cmp	r0, #AT91_PM_ULP1
 	beq	ulp1_mode
@@ -352,11 +502,14 @@ ulp1_mode:
 ulp_exit:
 	ldr	pmc, .pmc_base
 
+	at91_plla_enable
+
 	/*
 	 * Restore master clock setting
 	 */
-	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, .mckr_offset
+	ldr	tmp2, .saved_mckr
+	str	tmp2, [pmc, tmp1]
 
 	wait_mckrdy
 
@@ -496,14 +649,20 @@ ENDPROC(at91_sramc_self_refresh)
 	.word 0
 .shdwc:
 	.word 0
-.sfr:
+.sfrbu:
 	.word 0
 .memtype:
 	.word 0
 .pm_mode:
 	.word 0
+.mckr_offset:
+	.word 0
+.pmc_version:
+	.word 0
 .saved_mckr:
 	.word 0
+.saved_pllar:
+	.word 0
 .saved_sam9_lpr:
 	.word 0
 .saved_sam9_lpr1: