Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

1 files changed, 822 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
new file mode 100644
index 000000000000..cb9f5e011e73
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -0,0 +1,822 @@
+/*
+ * S3C24XX IRQ handling
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-irqtype.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define S3C_IRQTYPE_NONE	0
+#define S3C_IRQTYPE_EINT	1
+#define S3C_IRQTYPE_EDGE	2
+#define S3C_IRQTYPE_LEVEL	3
+
+struct s3c_irq_data {
+	unsigned int type;
+	unsigned long parent_irq;
+
+	/* data gets filled during init */
+	struct s3c_irq_intc *intc;
+	unsigned long sub_bits;
+	struct s3c_irq_intc *sub_intc;
+};
+
+/*
+ * Sructure holding the controller data
+ * @reg_pending		register holding pending irqs
+ * @reg_intpnd		special register intpnd in main intc
+ * @reg_mask		mask register
+ * @domain		irq_domain of the controller
+ * @parent		parent controller for ext and sub irqs
+ * @irqs		irq-data, always s3c_irq_data[32]
+ */
+struct s3c_irq_intc {
+	void __iomem		*reg_pending;
+	void __iomem		*reg_intpnd;
+	void __iomem		*reg_mask;
+	struct irq_domain	*domain;
+	struct s3c_irq_intc	*parent;
+	struct s3c_irq_data	*irqs;
+};
+
+static void s3c_irq_mask(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+	struct s3c_irq_data *parent_data;
+	unsigned long mask;
+	unsigned int irqno;
+
+	mask = __raw_readl(intc->reg_mask);
+	mask |= (1UL << data->hwirq);
+	__raw_writel(mask, intc->reg_mask);
+
+	if (parent_intc && irq_data->parent_irq) {
+		parent_data = &parent_intc->irqs[irq_data->parent_irq];
+
+		/* check to see if we need to mask the parent IRQ */
+		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
+			irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+			s3c_irq_mask(irq_get_irq_data(irqno));
+		}
+	}
+}
+
+static void s3c_irq_unmask(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	struct s3c_irq_intc *parent_intc = intc->parent;
+	struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+	unsigned long mask;
+	unsigned int irqno;
+
+	mask = __raw_readl(intc->reg_mask);
+	mask &= ~(1UL << data->hwirq);
+	__raw_writel(mask, intc->reg_mask);
+
+	if (parent_intc && irq_data->parent_irq) {
+		irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+		s3c_irq_unmask(irq_get_irq_data(irqno));
+	}
+}
+
+static inline void s3c_irq_ack(struct irq_data *data)
+{
+	struct s3c_irq_intc *intc = data->domain->host_data;
+	unsigned long bitval = 1UL << data->hwirq;
+
+	__raw_writel(bitval, intc->reg_pending);
+	if (intc->reg_intpnd)
+		__raw_writel(bitval, intc->reg_intpnd);
+}
+
+static int s3c_irqext_type_set(void __iomem *gpcon_reg,
+			       void __iomem *extint_reg,
+			       unsigned long gpcon_offset,
+			       unsigned long extint_offset,
+			       unsigned int type)
+{
+	unsigned long newvalue = 0, value;
+
+	/* Set the GPIO to external interrupt mode */
+	value = __raw_readl(gpcon_reg);
+	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+	__raw_writel(value, gpcon_reg);
+
+	/* Set the external interrupt to pointed trigger type */
+	switch (type)
+	{
+		case IRQ_TYPE_NONE:
+			pr_warn("No edge setting!\n");
+			break;
+
+		case IRQ_TYPE_EDGE_RISING:
+			newvalue = S3C2410_EXTINT_RISEEDGE;
+			break;
+
+		case IRQ_TYPE_EDGE_FALLING:
+			newvalue = S3C2410_EXTINT_FALLEDGE;
+			break;
+
+		case IRQ_TYPE_EDGE_BOTH:
+			newvalue = S3C2410_EXTINT_BOTHEDGE;
+			break;
+
+		case IRQ_TYPE_LEVEL_LOW:
+			newvalue = S3C2410_EXTINT_LOWLEV;
+			break;
+
+		case IRQ_TYPE_LEVEL_HIGH:
+			newvalue = S3C2410_EXTINT_HILEV;
+			break;
+
+		default:
+			pr_err("No such irq type %d", type);
+			return -EINVAL;
+	}
+
+	value = __raw_readl(extint_reg);
+	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+	__raw_writel(value, extint_reg);
+
+	return 0;
+}
+
+/* FIXME: make static when it's out of plat-samsung/irq.h */
+int s3c_irqext_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+
+	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (data->hwirq) * 2;
+		extint_offset = (data->hwirq) * 4;
+	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT1;
+		gpcon_offset = (data->hwirq - 8) * 2;
+		extint_offset = (data->hwirq - 8) * 4;
+	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT2;
+		gpcon_offset = (data->hwirq - 8) * 2;
+		extint_offset = (data->hwirq - 16) * 4;
+	} else {
+		return -EINVAL;
+	}
+
+	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+				   extint_offset, type);
+}
+
+static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+
+	if ((data->hwirq >= 0) && (data->hwirq <= 3)) {
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (data->hwirq) * 2;
+		extint_offset = (data->hwirq) * 4;
+	} else {
+		return -EINVAL;
+	}
+
+	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+				   extint_offset, type);
+}
+
+struct irq_chip s3c_irq_chip = {
+	.name		= "s3c",
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake
+};
+
+struct irq_chip s3c_irq_level_chip = {
+	.name		= "s3c-level",
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_ack	= s3c_irq_ack,
+};
+
+static struct irq_chip s3c_irqext_chip = {
+	.name		= "s3c-ext",
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_ack	= s3c_irq_ack,
+	.irq_set_type	= s3c_irqext_type,
+	.irq_set_wake	= s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+	.name		= "s3c-ext0",
+	.irq_ack	= s3c_irq_ack,
+	.irq_mask	= s3c_irq_mask,
+	.irq_unmask	= s3c_irq_unmask,
+	.irq_set_wake	= s3c_irq_wake,
+	.irq_set_type	= s3c_irqext0_type,
+};
+
+static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
+	struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
+	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
+	unsigned long src;
+	unsigned long msk;
+	unsigned int n;
+
+	chained_irq_enter(chip, desc);
+
+	src = __raw_readl(sub_intc->reg_pending);
+	msk = __raw_readl(sub_intc->reg_mask);
+
+	src &= ~msk;
+	src &= irq_data->sub_bits;
+
+	while (src) {
+		n = __ffs(src);
+		src &= ~(1 << n);
+		generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return -EINVAL;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	__raw_writel(intmod, S3C2410_INTMOD);
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
+#endif
+
+static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	struct s3c_irq_intc *intc = h->host_data;
+	struct s3c_irq_data *irq_data = &intc->irqs[hw];
+	struct s3c_irq_intc *parent_intc;
+	struct s3c_irq_data *parent_irq_data;
+	unsigned int irqno;
+
+	if (!intc) {
+		pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
+		return -EINVAL;
+	}
+
+	if (!irq_data) {
+		pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
+		return -EINVAL;
+	}
+
+	/* attach controller pointer to irq_data */
+	irq_data->intc = intc;
+
+	/* set handler and flags */
+	switch (irq_data->type) {
+	case S3C_IRQTYPE_NONE:
+		return 0;
+	case S3C_IRQTYPE_EINT:
+		if (irq_data->parent_irq)
+			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
+						 handle_edge_irq);
+		break;
+	case S3C_IRQTYPE_EDGE:
+		if (irq_data->parent_irq ||
+		    intc->reg_pending == S3C2416_SRCPND2)
+			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+						 handle_edge_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_chip,
+						 handle_edge_irq);
+		break;
+	case S3C_IRQTYPE_LEVEL:
+		if (irq_data->parent_irq)
+			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+						 handle_level_irq);
+		else
+			irq_set_chip_and_handler(virq, &s3c_irq_chip,
+						 handle_level_irq);
+		break;
+	default:
+		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
+		return -EINVAL;
+	}
+	set_irq_flags(virq, IRQF_VALID);
+
+	if (irq_data->parent_irq) {
+		parent_intc = intc->parent;
+		if (!parent_intc) {
+			pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
+			       hw);
+			goto err;
+		}
+
+		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+		if (!irq_data) {
+			pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
+			       hw);
+			goto err;
+		}
+
+		parent_irq_data->sub_intc = intc;
+		parent_irq_data->sub_bits |= (1UL << hw);
+
+		/* attach the demuxer to the parent irq */
+		irqno = irq_find_mapping(parent_intc->domain,
+					 irq_data->parent_irq);
+		if (!irqno) {
+			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
+			       irq_data->parent_irq);
+			goto err;
+		}
+		irq_set_chained_handler(irqno, s3c_irq_demux);
+	}
+
+	return 0;
+
+err:
+	set_irq_flags(virq, 0);
+
+	/* the only error can result from bad mapping data*/
+	return -EINVAL;
+}
+
+static struct irq_domain_ops s3c24xx_irq_ops = {
+	.map = s3c24xx_irq_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
+{
+	void __iomem *reg_source;
+	unsigned long pend;
+	unsigned long last;
+	int i;
+
+	/* if intpnd is set, read the next pending irq from there */
+	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(reg_source);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, intc->reg_pending);
+		if (intc->reg_intpnd)
+			__raw_writel(pend, intc->reg_intpnd);
+
+		pr_info("irq: clearing pending status %08x\n", (int)pend);
+		last = pend;
+	}
+}
+
+struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
+				       struct s3c_irq_data *irq_data,
+				       struct s3c_irq_intc *parent,
+				       unsigned long address)
+{
+	struct s3c_irq_intc *intc;
+	void __iomem *base = (void *)0xf6000000; /* static mapping */
+	int irq_num;
+	int irq_start;
+	int irq_offset;
+	int ret;
+
+	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+	if (!intc)
+		return ERR_PTR(-ENOMEM);
+
+	intc->irqs = irq_data;
+
+	if (parent)
+		intc->parent = parent;
+
+	/* select the correct data for the controller.
+	 * Need to hard code the irq num start and offset
+	 * to preserve the static mapping for now
+	 */
+	switch (address) {
+	case 0x4a000000:
+		pr_debug("irq: found main intc\n");
+		intc->reg_pending = base;
+		intc->reg_mask = base + 0x08;
+		intc->reg_intpnd = base + 0x10;
+		irq_num = 32;
+		irq_start = S3C2410_IRQ(0);
+		irq_offset = 0;
+		break;
+	case 0x4a000018:
+		pr_debug("irq: found subintc\n");
+		intc->reg_pending = base + 0x18;
+		intc->reg_mask = base + 0x1c;
+		irq_num = 29;
+		irq_start = S3C2410_IRQSUB(0);
+		irq_offset = 0;
+		break;
+	case 0x4a000040:
+		pr_debug("irq: found intc2\n");
+		intc->reg_pending = base + 0x40;
+		intc->reg_mask = base + 0x48;
+		intc->reg_intpnd = base + 0x50;
+		irq_num = 8;
+		irq_start = S3C2416_IRQ(0);
+		irq_offset = 0;
+		break;
+	case 0x560000a4:
+		pr_debug("irq: found eintc\n");
+		base = (void *)0xfd000000;
+
+		intc->reg_mask = base + 0xa4;
+		intc->reg_pending = base + 0x08;
+		irq_num = 20;
+		irq_start = S3C2410_IRQ(32);
+		irq_offset = 4;
+		break;
+	default:
+		pr_err("irq: unsupported controller address\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* now that all the data is complete, init the irq-domain */
+	s3c24xx_clear_intc(intc);
+	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
+					     irq_offset, &s3c24xx_irq_ops,
+					     intc);
+	if (!intc->domain) {
+		pr_err("irq: could not create irq-domain\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	return intc;
+
+err:
+	kfree(intc);
+	return ERR_PTR(ret);
+}
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+static struct s3c_irq_data init_base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_eint[32] = {
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+static struct s3c_irq_data init_subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+};
+
+void __init s3c24xx_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+}
+
+#ifdef CONFIG_CPU_S3C2416
+static struct s3c_irq_data init_s3c2416base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_NONE, },
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2416subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+static struct s3c_irq_data init_s3c2416_second[32] = {
+	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
+	{ .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
+	{ .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
+};
+
+void __init s3c2416_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+	pr_info("S3C2416: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+	s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
+
+	s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
+}
+
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+static struct s3c_irq_data init_s3c2443base[32] = {
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+
+static struct s3c_irq_data init_s3c2443subint[32] = {
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2443_init_irq(void)
+{
+	struct s3c_irq_intc *main_intc;
+
+	pr_info("S3C2443: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+	init_FIQ(FIQ_START);
+#endif
+
+	main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
+	if (IS_ERR(main_intc)) {
+		pr_err("irq: could not create main interrupt controller\n");
+		return;
+	}
+
+	s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+	s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
+}
+#endif