Merge tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM DT updates from Arnd Bergmann:
 "As usual, the bulk of the changes for the SoC tree are devicetree file
  updates, and most of these changes are for 64-bit embedded machines.
  As before, there are a ton of style cleanups, and additional hardware
  support for existing machines.

  Looking only at the new SoC, the notable additions are:

   - A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
     BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
     BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
     with a corresponding reference board.

   - The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
     i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
     NPU.

   - Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
     Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
     SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
     added here in addition to the reference boards.

   - Allwinner H616, a newer version of the H6 SoC, targeted at
     Set-top-box applications. It comes with dts files for the Orange Pi
     zero2 single-board computer and the X96 Mate set-top-box

   - Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
     Armada SoC family based on the Cortex-A55 core.

  New machines based on previously supported SoCs include:

   - Several new machines on NXP i.MX platforms: multiple Toradex
     Colibri boards using the "Iris" and "Ixora" carriers, DH
     electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
     phytech phyBOARD-Polis-i.MX8MM.

   - Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
     10 Software Virtual platform, both in the SoCFPGA platform.

   - Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
     Router and the Cisco Meraki MR26 access point

   - Improved Chromebook support for both the Mediatek and Qualcomm SoC
     families brought added machines: Acer Chromebook 514 (MT8192), Acer
     Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
     including the Lenovo IdeaPad Chromebook Duet 3.

   - Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
     Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.

   - Finally, there are a few development board on other chips: PCB8309
     (Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
     Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"

* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
  dt-bindings: soc: bcm: use absolute path to other schema
  dt-bindings: soc: bcm: drop quotes when not needed
  dt-bindings: soc: microchip: use absolute path to other schema
  dt-bindings: soc: microchip: drop quotes when not needed
  ARM: dts: lan966x: keep lan966 entries alphabetically sorted
  ARM: dts: lan966x: add support for pcb8309
  dt-bindings: arm: at91: add lan966 pcb8309 board
  ARM: dts: lan966x: Enable network driver on pcb8291
  ARM: dts: lan966x: Disable can0 on pcb8291
  ARM: dts: lan966x: Add gpio-restart
  dt-bindings: arm: aspeed: add Aspeed Evaluation boards
  arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
  dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
  dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
  dt-bindings: arm: qcom: add missing SM6350 board compatibles
  dt-bindings: arm: qcom: add missing SM6125 board compatibles
  dt-bindings: arm: qcom: add missing SDM845 board compatibles
  dt-bindings: arm: qcom: add missing SDM636 board compatibles
  dt-bindings: arm: qcom: add missing SDM630 board compatibles
  dt-bindings: arm: qcom: add missing QCS404 board compatibles
  ...

18 files changed, 936 insertions, 9 deletions

diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 5082fcd1fea5..e8584d3b698f 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -9,5 +9,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2837-rpi-zero-2-w.dtb
 
 subdir-y	+= bcm4908
+subdir-y	+= bcmbca
 subdir-y	+= northstar2
 subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
index b63eefab48bd..064f7f549665 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
@@ -83,25 +83,25 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;
 
-		brightness {
+		key-brightness {
 			label = "LEDs";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		key-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi {
+		key-wifi {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		key-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 169fbb7cfd34..04f8524b5335 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -18,25 +18,25 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;
 
-		wifi {
+		key-wifi {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		key-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		key-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
 		};
 
-		brightness {
+		key-brightness {
 			label = "LEDs";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
new file mode 100644
index 000000000000..38f14307184b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+				bcm4912-asus-gt-ax6000.dtb \
+				bcm94912.dtb \
+				bcm963158.dtb \
+				bcm96858.dtb \
+				bcm963146.dtb \
+				bcm96856.dtb \
+				bcm96813.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
new file mode 100644
index 000000000000..ed554666e95e
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca";
+	model = "Asus GT-AX6000";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
new file mode 100644
index 000000000000..3d016c2ce675
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm4912", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
new file mode 100644
index 000000000000..04de96bd0a03
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm63146", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
new file mode 100644
index 000000000000..13629702f70b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm63158", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
new file mode 100644
index 000000000000..c3e6197be808
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6813", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
new file mode 100644
index 000000000000..0bce6497219f
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6856", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>;
+	};
+
+	clocks: clocks {
+		periph_clk:periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, /* GICD */
+				<0x2000 0x2000>, /* GICC */
+				<0x4000 0x2000>, /* GICH */
+				<0x6000 0x2000>; /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
new file mode 100644
index 000000000000..29a880c6c858
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6858", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk:periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, /* GICD */
+				<0x2000 0x2000>, /* GICC */
+				<0x4000 0x2000>, /* GICH */
+				<0x6000 0x2000>; /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x62000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
new file mode 100644
index 000000000000..a3623e6f6919
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	model = "Broadcom BCM94912 Reference Board";
+	compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
new file mode 100644
index 000000000000..e39f1e6d4774
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63146.dtsi"
+
+/ {
+	model = "Broadcom BCM963146 Reference Board";
+	compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
new file mode 100644
index 000000000000..eba07e0b1ca6
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63158.dtsi"
+
+/ {
+	model = "Broadcom BCM963158 Reference Board";
+	compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
new file mode 100644
index 000000000000..af17091ae764
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6813.dtsi"
+
+/ {
+	model = "Broadcom BCM96813 Reference Board";
+	compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
new file mode 100644
index 000000000000..032aeb75c983
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6856.dtsi"
+
+/ {
+	model = "Broadcom BCM96856 Reference Board";
+	compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
new file mode 100644
index 000000000000..0cbf582f5d54
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6858.dtsi"
+
+/ {
+	model = "Broadcom BCM96858 Reference Board";
+	compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 09d4aa8ae1d6..8f8c25e51194 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -567,7 +567,7 @@
 			reg-names = "amac_base";
 			dma-coherent;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
-			status= "disabled";
+			status = "disabled";
 		};
 
 		nand: nand@360000 {