MIPS: Whitespace cleanup.

Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

14 files changed, 155 insertions, 155 deletions

diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
index 6d5ddbc112cc..504ed61a47cd 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -155,8 +155,8 @@ int cvmx_bootmem_init(void *mem_desc_ptr)
 	 *
 	 * Linux 64 bit: Set XKPHYS bit
 	 * Linux 32 bit: use mmap to create mapping, use virtual address
-	 * CVMX 64 bit:  use physical address directly
-	 * CVMX 32 bit:  use physical address directly
+	 * CVMX 64 bit:	 use physical address directly
+	 * CVMX 32 bit:	 use physical address directly
 	 *
 	 * Note that the CVMX environment assumes the use of 1-1 TLB
 	 * mappings so that the physical addresses can be used
@@ -398,7 +398,7 @@ error_out:
 int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags)
 {
 	uint64_t cur_addr;
-	uint64_t prev_addr = 0;	/* zero is invalid */
+	uint64_t prev_addr = 0; /* zero is invalid */
 	int retval = 0;
 
 #ifdef DEBUG
@@ -424,7 +424,7 @@ int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags)
 	if (cur_addr == 0 || phy_addr < cur_addr) {
 		/* add at front of list - special case with changing head ptr */
 		if (cur_addr && phy_addr + size > cur_addr)
-			goto bootmem_free_done;	/* error, overlapping section */
+			goto bootmem_free_done; /* error, overlapping section */
 		else if (phy_addr + size == cur_addr) {
 			/* Add to front of existing first block */
 			cvmx_bootmem_phy_set_next(phy_addr,
@@ -611,7 +611,7 @@ int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags)
 	}
 
 	cvmx_bootmem_unlock();
-	return named_block_ptr != NULL;	/* 0 on failure, 1 on success */
+	return named_block_ptr != NULL; /* 0 on failure, 1 on success */
 }
 
 int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr,
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
index fd2015331a20..7c6497781895 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
@@ -203,10 +203,10 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
  * enumeration from the bootloader.
  *
  * @ipd_port: IPD input port associated with the port we want to get link
- *                 status for.
+ *		   status for.
  *
  * Returns The ports link status. If the link isn't fully resolved, this must
- *         return zero.
+ *	   return zero.
  */
 cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 {
@@ -357,16 +357,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 				result.s.link_up = 1;
 				result.s.full_duplex = ((phy_status >> 13) & 1);
 				switch ((phy_status >> 14) & 3) {
-				case 0:	/* 10 Mbps */
+				case 0: /* 10 Mbps */
 					result.s.speed = 10;
 					break;
-				case 1:	/* 100 Mbps */
+				case 1: /* 100 Mbps */
 					result.s.speed = 100;
 					break;
-				case 2:	/* 1 Gbps */
+				case 2: /* 1 Gbps */
 					result.s.speed = 1000;
 					break;
-				case 3:	/* Illegal */
+				case 3: /* Illegal */
 					result.u64 = 0;
 					break;
 				}
@@ -391,16 +391,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
 		result.s.link_up = inband_status.s.status;
 		result.s.full_duplex = inband_status.s.duplex;
 		switch (inband_status.s.speed) {
-		case 0:	/* 10 Mbps */
+		case 0: /* 10 Mbps */
 			result.s.speed = 10;
 			break;
-		case 1:	/* 100 Mbps */
+		case 1: /* 100 Mbps */
 			result.s.speed = 100;
 			break;
-		case 2:	/* 1 Gbps */
+		case 2: /* 1 Gbps */
 			result.s.speed = 1000;
 			break;
-		case 3:	/* Illegal */
+		case 3: /* Illegal */
 			result.u64 = 0;
 			break;
 		}
@@ -429,9 +429,9 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
  *
  * @phy_addr:  The address of the PHY to program
  * @enable_autoneg:
- *                  Non zero if you want to enable auto-negotiation.
+ *		    Non zero if you want to enable auto-negotiation.
  * @link_info: Link speed to program. If the speed is zero and auto-negotiation
- *                  is enabled, all possible negotiation speeds are advertised.
+ *		    is enabled, all possible negotiation speeds are advertised.
  *
  * Returns Zero on success, negative on failure
  */
@@ -607,10 +607,10 @@ int cvmx_helper_board_link_set_phy(int phy_addr,
  *
  * @interface: Interface to probe
  * @supported_ports:
- *                  Number of ports Octeon supports.
+ *		    Number of ports Octeon supports.
  *
  * Returns Number of ports the actual board supports. Many times this will
- *         simple be "support_ports".
+ *	   simple be "support_ports".
  */
 int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
 {
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
index c1c54890bae0..607b4e659579 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c
@@ -79,10 +79,10 @@ void cvmx_helper_qlm_jtag_init(void)
  * @qlm:    QLM to shift value into
  * @bits:   Number of bits to shift in (1-32).
  * @data:   Data to shift in. Bit 0 enters the chain first, followed by
- *               bit 1, etc.
+ *		 bit 1, etc.
  *
  * Returns The low order bits of the JTAG chain that shifted out of the
- *         circle.
+ *	   circle.
  */
 uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data)
 {
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
index 82b21843421c..f59c88ee9b31 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c
@@ -131,7 +131,7 @@ void cvmx_helper_rgmii_internal_loopback(int port)
  * @interface: Interface to setup
  * @port:      Port to setup (0..3)
  * @cpu_clock_hz:
- *                  Chip frequency in Hertz
+ *		    Chip frequency in Hertz
  *
  * Returns Zero on success, negative on failure
  */
@@ -409,14 +409,14 @@ int __cvmx_helper_rgmii_link_set(int ipd_port,
 			mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
 
 	/*
-	 * Port  .en  .type  .p0mii  Configuration
-	 * ----  ---  -----  ------  -----------------------------------------
-	 *  X      0     X      X    All links are disabled.
-	 *  0      1     X      0    Port 0 is RGMII
-	 *  0      1     X      1    Port 0 is MII
-	 *  1      1     0      X    Ports 1 and 2 are configured as RGMII ports.
-	 *  1      1     1      X    Port 1: GMII/MII; Port 2: disabled. GMII or
-	 *                           MII port is selected by GMX_PRT1_CFG[SPEED].
+	 * Port	 .en  .type  .p0mii  Configuration
+	 * ----	 ---  -----  ------  -----------------------------------------
+	 *  X	   0	 X	X    All links are disabled.
+	 *  0	   1	 X	0    Port 0 is RGMII
+	 *  0	   1	 X	1    Port 0 is MII
+	 *  1	   1	 0	X    Ports 1 and 2 are configured as RGMII ports.
+	 *  1	   1	 1	X    Port 1: GMII/MII; Port 2: disabled. GMII or
+	 *			     MII port is selected by GMX_PRT1_CFG[SPEED].
 	 */
 
 			/* In MII mode, CLK_CNT = 1. */
@@ -464,9 +464,9 @@ int __cvmx_helper_rgmii_link_set(int ipd_port,
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
index 0c0bf5d30e70..45f18cce31a9 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c
@@ -523,9 +523,9 @@ int __cvmx_helper_sgmii_link_set(int ipd_port,
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
index 2830e4bdf7f3..1f3030c72d88 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c
@@ -160,16 +160,16 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port)
 		result.s.link_up = inband.s.status;
 		result.s.full_duplex = inband.s.duplex;
 		switch (inband.s.speed) {
-		case 0:	/* 10 Mbps */
+		case 0: /* 10 Mbps */
 			result.s.speed = 10;
 			break;
-		case 1:	/* 100 Mbps */
+		case 1: /* 100 Mbps */
 			result.s.speed = 100;
 			break;
-		case 2:	/* 1 Gbps */
+		case 2: /* 1 Gbps */
 			result.s.speed = 1000;
 			break;
-		case 3:	/* Illegal */
+		case 3: /* Illegal */
 			result.s.speed = 0;
 			result.s.link_up = 0;
 			break;
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
index 116dea17acf5..b72d9fbf97a3 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c
@@ -96,9 +96,9 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work)
 	uint8_t *end_of_data;
 
 	cvmx_dprintf("Packet Length:   %u\n", work->len);
-	cvmx_dprintf("    Input Port:  %u\n", work->ipprt);
-	cvmx_dprintf("    QoS:         %u\n", work->qos);
-	cvmx_dprintf("    Buffers:     %u\n", work->word2.s.bufs);
+	cvmx_dprintf("	  Input Port:  %u\n", work->ipprt);
+	cvmx_dprintf("	  QoS:	       %u\n", work->qos);
+	cvmx_dprintf("	  Buffers:     %u\n", work->word2.s.bufs);
 
 	if (work->word2.s.bufs == 0) {
 		union cvmx_ipd_wqe_fpa_queue wqe_pool;
@@ -132,14 +132,14 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work)
 	while (remaining_bytes) {
 		start_of_buffer =
 		    ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7;
-		cvmx_dprintf("    Buffer Start:%llx\n",
+		cvmx_dprintf("	  Buffer Start:%llx\n",
 			     (unsigned long long)start_of_buffer);
-		cvmx_dprintf("    Buffer I   : %u\n", buffer_ptr.s.i);
-		cvmx_dprintf("    Buffer Back: %u\n", buffer_ptr.s.back);
-		cvmx_dprintf("    Buffer Pool: %u\n", buffer_ptr.s.pool);
-		cvmx_dprintf("    Buffer Data: %llx\n",
+		cvmx_dprintf("	  Buffer I   : %u\n", buffer_ptr.s.i);
+		cvmx_dprintf("	  Buffer Back: %u\n", buffer_ptr.s.back);
+		cvmx_dprintf("	  Buffer Pool: %u\n", buffer_ptr.s.pool);
+		cvmx_dprintf("	  Buffer Data: %llx\n",
 			     (unsigned long long)buffer_ptr.s.addr);
-		cvmx_dprintf("    Buffer Size: %u\n", buffer_ptr.s.size);
+		cvmx_dprintf("	  Buffer Size: %u\n", buffer_ptr.s.size);
 
 		cvmx_dprintf("\t\t");
 		data_address = (uint8_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr);
@@ -172,11 +172,11 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work)
  *
  * @queue:  Input queue to setup RED on (0-7)
  * @pass_thresh:
- *               Packets will begin slowly dropping when there are less than
- *               this many packet buffers free in FPA 0.
+ *		 Packets will begin slowly dropping when there are less than
+ *		 this many packet buffers free in FPA 0.
  * @drop_thresh:
- *               All incomming packets will be dropped when there are less
- *               than this many free packet buffers in FPA 0.
+ *		 All incomming packets will be dropped when there are less
+ *		 than this many free packet buffers in FPA 0.
  * Returns Zero on success. Negative on failure
  */
 int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh)
@@ -207,11 +207,11 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh)
  * Setup Random Early Drop to automatically begin dropping packets.
  *
  * @pass_thresh:
- *               Packets will begin slowly dropping when there are less than
- *               this many packet buffers free in FPA 0.
+ *		 Packets will begin slowly dropping when there are less than
+ *		 this many packet buffers free in FPA 0.
  * @drop_thresh:
- *               All incomming packets will be dropped when there are less
- *               than this many free packet buffers in FPA 0.
+ *		 All incomming packets will be dropped when there are less
+ *		 than this many free packet buffers in FPA 0.
  * Returns Zero on success. Negative on failure
  */
 int cvmx_helper_setup_red(int pass_thresh, int drop_thresh)
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
index 1723248e987d..7653b7e92197 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c
@@ -321,9 +321,9 @@ int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c
index fa4963856353..d63d20dfbfb0 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c
@@ -111,7 +111,7 @@ int cvmx_helper_ports_on_interface(int interface)
  * @interface: Interface to probe
  *
  * Returns Mode of the interface. Unknown or unsupported interfaces return
- *         DISABLED.
+ *	   DISABLED.
  */
 cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
 {
@@ -187,7 +187,7 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
  * the defines in executive-config.h.
  *
  * @ipd_port: Port to configure. This follows the IPD numbering, not the
- *                 per interface numbering
+ *		   per interface numbering
  *
  * Returns Zero on success, negative on failure
  */
@@ -591,7 +591,7 @@ static int __cvmx_helper_packet_hardware_enable(int interface)
  * Function to adjust internal IPD pointer alignments
  *
  * Returns 0 on success
- *         !0 on failure
+ *	   !0 on failure
  */
 int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
 {
@@ -1068,9 +1068,9 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
  *
  * @ipd_port: IPD/PKO port to loopback.
  * @enable_internal:
- *                 Non zero if you want internal loopback
+ *		   Non zero if you want internal loopback
  * @enable_external:
- *                 Non zero if you want external loopback
+ *		   Non zero if you want external loopback
  *
  * Returns Zero on success, negative on failure.
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c
index 560e034aa024..fa327ec891cd 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c
@@ -85,11 +85,11 @@ void __cvmx_interrupt_gmxx_enable(int interface)
 	if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
 		if (mode.s.en) {
 			switch (mode.cn56xx.mode) {
-			case 1:	/* XAUI */
+			case 1: /* XAUI */
 				num_ports = 1;
 				break;
-			case 2:	/* SGMII */
-			case 3:	/* PICMG */
+			case 2: /* SGMII */
+			case 3: /* PICMG */
 				num_ports = 4;
 				break;
 			default:	/* Disabled */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
index 33b72144db31..42e38c30b540 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
@@ -147,7 +147,7 @@ int cvmx_l2c_set_hw_way_partition(uint32_t mask)
 	mask &= valid_mask;
 
 	/* A UMSK setting which blocks all L2C Ways is an error on some chips */
-	if (mask == valid_mask  && !OCTEON_IS_MODEL(OCTEON_CN63XX))
+	if (mask == valid_mask	&& !OCTEON_IS_MODEL(OCTEON_CN63XX))
 		return -1;
 
 	if (OCTEON_IS_MODEL(OCTEON_CN63XX))
@@ -438,7 +438,7 @@ void cvmx_l2c_flush(void)
 		for (set = 0; set < n_set; set++) {
 			for (assoc = 0; assoc < n_assoc; assoc++) {
 				address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-						       (assoc << assoc_shift) |	(set << set_shift));
+						       (assoc << assoc_shift) | (set << set_shift));
 				CVMX_CACHE_WBIL2I(address, 0);
 			}
 		}
@@ -573,8 +573,8 @@ union __cvmx_l2c_tag {
  * @index:  Index of the cacheline
  *
  * Returns The Octeon model specific tag structure.  This is
- *         translated by a wrapper function to a generic form that is
- *         easier for applications to use.
+ *	   translated by a wrapper function to a generic form that is
+ *	   easier for applications to use.
  */
 static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index)
 {
@@ -618,12 +618,12 @@ static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index)
 		".set push\n\t"
 		".set mips64\n\t"
 		".set noreorder\n\t"
-		"sd    %[dbg_val], 0(%[dbg_addr])\n\t"   /* Enter debug mode, wait for store */
+		"sd    %[dbg_val], 0(%[dbg_addr])\n\t"	 /* Enter debug mode, wait for store */
 		"ld    $0, 0(%[dbg_addr])\n\t"
-		"ld    %[tag_val], 0(%[tag_addr])\n\t"   /* Read L2C tag data */
-		"sd    $0, 0(%[dbg_addr])\n\t"          /* Exit debug mode, wait for store */
+		"ld    %[tag_val], 0(%[tag_addr])\n\t"	 /* Read L2C tag data */
+		"sd    $0, 0(%[dbg_addr])\n\t"		/* Exit debug mode, wait for store */
 		"ld    $0, 0(%[dbg_addr])\n\t"
-		"cache 9, 0($0)\n\t"             /* Invalidate dcache to discard debug data */
+		"cache 9, 0($0)\n\t"		 /* Invalidate dcache to discard debug data */
 		".set pop"
 		: [tag_val] "=r" (tag_val)
 		: [dbg_addr] "r" (dbg_addr), [dbg_val] "r" (debug_val), [tag_addr] "r" (debug_tag_addr)
@@ -664,10 +664,10 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index)
 		CVMX_SYNC;   /* make sure CVMX_L2C_TADX_TAG is updated */
 		l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0));
 
-		tag.s.V     = l2c_tadx_tag.s.valid;
-		tag.s.D     = l2c_tadx_tag.s.dirty;
-		tag.s.L     = l2c_tadx_tag.s.lock;
-		tag.s.U     = l2c_tadx_tag.s.use;
+		tag.s.V	    = l2c_tadx_tag.s.valid;
+		tag.s.D	    = l2c_tadx_tag.s.dirty;
+		tag.s.L	    = l2c_tadx_tag.s.lock;
+		tag.s.U	    = l2c_tadx_tag.s.use;
 		tag.s.addr  = l2c_tadx_tag.s.tag;
 	} else {
 		union __cvmx_l2c_tag tmp_tag;
@@ -679,34 +679,34 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index)
 		 * as it can represent all models.
 		 */
 		if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
-			tag.s.V    = tmp_tag.cn58xx.V;
-			tag.s.D    = tmp_tag.cn58xx.D;
-			tag.s.L    = tmp_tag.cn58xx.L;
-			tag.s.U    = tmp_tag.cn58xx.U;
+			tag.s.V	   = tmp_tag.cn58xx.V;
+			tag.s.D	   = tmp_tag.cn58xx.D;
+			tag.s.L	   = tmp_tag.cn58xx.L;
+			tag.s.U	   = tmp_tag.cn58xx.U;
 			tag.s.addr = tmp_tag.cn58xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) {
-			tag.s.V    = tmp_tag.cn38xx.V;
-			tag.s.D    = tmp_tag.cn38xx.D;
-			tag.s.L    = tmp_tag.cn38xx.L;
-			tag.s.U    = tmp_tag.cn38xx.U;
+			tag.s.V	   = tmp_tag.cn38xx.V;
+			tag.s.D	   = tmp_tag.cn38xx.D;
+			tag.s.L	   = tmp_tag.cn38xx.L;
+			tag.s.U	   = tmp_tag.cn38xx.U;
 			tag.s.addr = tmp_tag.cn38xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
-			tag.s.V    = tmp_tag.cn31xx.V;
-			tag.s.D    = tmp_tag.cn31xx.D;
-			tag.s.L    = tmp_tag.cn31xx.L;
-			tag.s.U    = tmp_tag.cn31xx.U;
+			tag.s.V	   = tmp_tag.cn31xx.V;
+			tag.s.D	   = tmp_tag.cn31xx.D;
+			tag.s.L	   = tmp_tag.cn31xx.L;
+			tag.s.U	   = tmp_tag.cn31xx.U;
 			tag.s.addr = tmp_tag.cn31xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) {
-			tag.s.V    = tmp_tag.cn30xx.V;
-			tag.s.D    = tmp_tag.cn30xx.D;
-			tag.s.L    = tmp_tag.cn30xx.L;
-			tag.s.U    = tmp_tag.cn30xx.U;
+			tag.s.V	   = tmp_tag.cn30xx.V;
+			tag.s.D	   = tmp_tag.cn30xx.D;
+			tag.s.L	   = tmp_tag.cn30xx.L;
+			tag.s.U	   = tmp_tag.cn30xx.U;
 			tag.s.addr = tmp_tag.cn30xx.addr;
 		} else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) {
-			tag.s.V    = tmp_tag.cn50xx.V;
-			tag.s.D    = tmp_tag.cn50xx.D;
-			tag.s.L    = tmp_tag.cn50xx.L;
-			tag.s.U    = tmp_tag.cn50xx.U;
+			tag.s.V	   = tmp_tag.cn50xx.V;
+			tag.s.D	   = tmp_tag.cn50xx.D;
+			tag.s.L	   = tmp_tag.cn50xx.L;
+			tag.s.U	   = tmp_tag.cn50xx.U;
 			tag.s.addr = tmp_tag.cn50xx.addr;
 		} else {
 			cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__);
@@ -865,7 +865,7 @@ void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index)
 		uint64_t address;
 		/* Create the address based on index and association.
 		 * Bits<20:17> select the way of the cache block involved in
-		 *             the operation
+		 *	       the operation
 		 * Bits<16:7> of the effect address select the index
 		 */
 		address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index f557084b1092..f2c877541597 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -99,7 +99,7 @@ void cvmx_pko_initialize_global(void)
  * be called after the FPA has been initialized and filled with pages.
  *
  * Returns 0 on success
- *         !0 on failure
+ *	   !0 on failure
  */
 int cvmx_pko_initialize_local(void)
 {
@@ -186,19 +186,19 @@ void cvmx_pko_shutdown(void)
 /**
  * Configure a output port and the associated queues for use.
  *
- * @port:       Port to configure.
+ * @port:	Port to configure.
  * @base_queue: First queue number to associate with this port.
  * @num_queues: Number of queues to associate with this port
- * @priority:   Array of priority levels for each queue. Values are
- *                   allowed to be 0-8. A value of 8 get 8 times the traffic
- *                   of a value of 1.  A value of 0 indicates that no rounds
- *                   will be participated in. These priorities can be changed
- *                   on the fly while the pko is enabled. A priority of 9
- *                   indicates that static priority should be used.  If static
- *                   priority is used all queues with static priority must be
- *                   contiguous starting at the base_queue, and lower numbered
- *                   queues have higher priority than higher numbered queues.
- *                   There must be num_queues elements in the array.
+ * @priority:	Array of priority levels for each queue. Values are
+ *		     allowed to be 0-8. A value of 8 get 8 times the traffic
+ *		     of a value of 1.  A value of 0 indicates that no rounds
+ *		     will be participated in. These priorities can be changed
+ *		     on the fly while the pko is enabled. A priority of 9
+ *		     indicates that static priority should be used.  If static
+ *		     priority is used all queues with static priority must be
+ *		     contiguous starting at the base_queue, and lower numbered
+ *		     queues have higher priority than higher numbered queues.
+ *		     There must be num_queues elements in the array.
  */
 cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue,
 				       uint64_t num_queues,
@@ -440,7 +440,7 @@ void cvmx_pko_show_queue_map()
  * @port:      Port to rate limit
  * @packets_s: Maximum packet/sec
  * @burst:     Maximum number of packets to burst in a row before rate
- *                  limiting cuts in.
+ *		    limiting cuts in.
  *
  * Returns Zero on success, negative on failure
  */
@@ -473,7 +473,7 @@ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst)
  * @port:   Port to rate limit
  * @bits_s: PKO rate limit in bits/sec
  * @burst:  Maximum number of bits to burst before rate
- *               limiting cuts in.
+ *		 limiting cuts in.
  *
  * Returns Zero on success, negative on failure
  */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c
index 74afb1710cd9..ef5198d13a0e 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c
@@ -69,7 +69,7 @@ static cvmx_spi_callbacks_t cvmx_spi_callbacks = {
 /**
  * Get current SPI4 initialization callbacks
  *
- * @callbacks:  Pointer to the callbacks structure.to fill
+ * @callbacks:	Pointer to the callbacks structure.to fill
  *
  * Returns Pointer to cvmx_spi_callbacks_t structure.
  */
@@ -92,11 +92,11 @@ void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks)
  * Initialize and start the SPI interface.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  * @num_ports: Number of SPI ports to configure
  *
@@ -138,11 +138,11 @@ int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout,
  * with its correspondent system.
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  *
  * Returns Zero on success, negative of failure.
@@ -160,7 +160,7 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout)
 	INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode);
 
 	/* NOTE: Calendar setup is not performed during restart */
-	/*       Refer to cvmx_spi_start_interface() for the full sequence */
+	/*	 Refer to cvmx_spi_start_interface() for the full sequence */
 
 	/* Callback to perform clock detection */
 	INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout);
@@ -182,11 +182,11 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout)
  * Callback to perform SPI4 reset
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)
@@ -297,11 +297,11 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode)
  * Callback to setup calendar and miscellaneous settings before clock detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @num_ports: Number of ports to configure on SPI
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -382,7 +382,7 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode,
 		stxx_spi4_dat.u64 = 0;
 		/*Minimum needed by dynamic alignment */
 		stxx_spi4_dat.s.alpha = 32;
-		stxx_spi4_dat.s.max_t = 0xFFFF;	/*Minimum interval is 0x20 */
+		stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */
 		cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface),
 			       stxx_spi4_dat.u64);
 
@@ -416,11 +416,11 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode,
  * Callback to perform clock detection
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for clock synchronization in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -494,11 +494,11 @@ int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout)
  * Callback to perform link training
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for link to be trained (in seconds)
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -563,11 +563,11 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout)
  * Callback to perform calendar data synchronization
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  * @timeout:   Timeout to wait for calendar data in seconds
  *
  * Returns Zero on success, non-zero error code on failure (will cause
@@ -620,11 +620,11 @@ int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout)
  * Callback to handle interface up
  *
  * @interface: The identifier of the packet interface to configure and
- *                  use as a SPI interface.
+ *		    use as a SPI interface.
  * @mode:      The operating mode for the SPI interface. The interface
- *                  can operate as a full duplex (both Tx and Rx data paths
- *                  active) or as a halfplex (either the Tx data path is
- *                  active or the Rx data path is active, but not both).
+ *		    can operate as a full duplex (both Tx and Rx data paths
+ *		    active) or as a halfplex (either the Tx data path is
+ *		    active or the Rx data path is active, but not both).
  *
  * Returns Zero on success, non-zero error code on failure (will cause
  * SPI initialization to abort)
diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
index 8b18a20cc7b3..3d17fac29359 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
@@ -74,26 +74,26 @@ EXPORT_SYMBOL(cvmx_sysinfo_get);
 
 /**
  * This function is used in non-simple executive environments (such as
- * Linux kernel, u-boot, etc.)  to configure the minimal fields that
+ * Linux kernel, u-boot, etc.)	to configure the minimal fields that
  * are required to use simple executive files directly.
  *
  * Locking (if required) must be handled outside of this
  * function
  *
  * @phy_mem_desc_ptr:
- *                   Pointer to global physical memory descriptor
- *                   (bootmem descriptor) @board_type: Octeon board
- *                   type enumeration
+ *		     Pointer to global physical memory descriptor
+ *		     (bootmem descriptor) @board_type: Octeon board
+ *		     type enumeration
  *
  * @board_rev_major:
- *                   Board major revision
+ *		     Board major revision
  * @board_rev_minor:
- *                   Board minor revision
+ *		     Board minor revision
  * @cpu_clock_hz:
- *                   CPU clock freqency in hertz
+ *		     CPU clock freqency in hertz
  *
  * Returns 0: Failure
- *         1: success
+ *	   1: success
  */
 int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
 				    uint16_t board_type,