[MIPS] Rewrite all the assembler interrupt handlers to C.

Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had.  And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.

The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

3 files changed, 83 insertions, 116 deletions

diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile
index 01780b605346..224bb848f16b 100644
--- a/arch/mips/mips-boards/sead/Makefile
+++ b/arch/mips/mips-boards/sead/Makefile
@@ -23,4 +23,4 @@
 # under Linux.
 #
 
-obj-y		:= sead_int.o sead-irq.o sead_setup.o
+obj-y		:= sead_int.o sead_setup.o
diff --git a/arch/mips/mips-boards/sead/sead-irq.S b/arch/mips/mips-boards/sead/sead-irq.S
deleted file mode 100644
index d5dea1d2e220..000000000000
--- a/arch/mips/mips-boards/sead/sead-irq.S
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Interrupt exception dispatch code.
- *
- */
-#include <linux/config.h>
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/mips-boards/seadint.h>
-
-/*
- * IRQs on the SEAD board look basically are combined together on hardware
- * interrupt 0 (MIPS IRQ 2)) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        UART0 (hw0)
- *             3        UART1 (hw1)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(mipsIRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-
-	mfc0	s0, CP0_CAUSE		# get irq bits
-	mfc0	s1, CP0_STATUS		# get irq mask
-	andi	s0, ST0_IM		# CAUSE.CE may be non-zero!
-	and	s0, s1
-
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- 	.set	mips32
-	clz	a0, s0
-	.set	mips0
-	negu	a0
-	addu	a0, 31-CAUSEB_IP
-	bltz	a0, spurious
-#else
-	beqz	s0, spurious
-	 li	a0, 7
-
-	and	t0, s0, 0xf000
-	sltiu	t0, t0, 1
-	sll	t0, 2
-	subu	a0, t0
-	sll	s0, t0
-
-	and	t0, s0, 0xc000
-	sltiu	t0, t0, 1
-	sll	t0, 1
-	subu	a0, t0
-	sll	s0, t0
-
-	and	t0, s0, 0x8000
-	sltiu	t0, t0, 1
-	# sll	t0, 0
-	subu	a0, t0
-	# sll	s0, t0
-#endif
-
-	 addu	a0, MIPSCPU_INT_BASE
-	jal	do_IRQ
-	 move	a1, sp
-
-	j	ret_from_irq
-	 nop
-
-spurious:
-	j	spurious_interrupt
-	 nop
-	END(mipsIRQ)
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
index 90fda0d9915f..9168d934c661 100644
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ b/arch/mips/mips-boards/sead/sead_int.c
@@ -24,16 +24,94 @@
 #include <linux/irq.h>
 
 #include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
 #include <asm/system.h>
 
 #include <asm/mips-boards/seadint.h>
 
-extern asmlinkage void mipsIRQ(void);
+static inline int clz(unsigned long x)
+{
+	__asm__ (
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	return -clz(pending) + 31 - CAUSEB_IP;
+#else
+	unsigned int a0 = 7;
+	unsigned int t0;
+
+	t0 = s0 & 0xf000;
+	t0 = t0 < 1;
+	t0 = t0 << 2;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0xc000;
+	t0 = t0 < 1;
+	t0 = t0 << 1;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0x8000;
+	t0 = t0 < 1;
+	//t0 = t0 << 2;
+	a0 = a0 - t0;
+	//s0 = s0 << t0;
+
+	return a0;
+#endif
+}
+
+/*
+ * IRQs on the SEAD board look basically are combined together on hardware
+ * interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        UART0 (hw0)
+ *             3        UART1 (hw1)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq >= 0)
+		do_IRQ(MIPSCPU_INT_BASE + irq, regs);
+	else
+		spurious_interrupt(regs);
+}
 
 void __init arch_init_irq(void)
 {
 	mips_cpu_irq_init(MIPSCPU_INT_BASE);
-
-	/* Now safe to set the exception vector. */
-	set_except_vector(0, mipsIRQ);
 }