diff options
| author | Paul Burton <paul.burton@imgtec.com> | 2013-12-02 17:48:37 +0100 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2014-01-23 13:02:35 +0100 |
| commit | ae0d7cbc99890b3a417a5705763784b8551a10d6 (patch) | |
| tree | 5cad4268f616744749f6ea23e5ce406ecd2aec35 /arch/mips/pci/fixup-malta.c | |
| parent | MIPS: Malta: initialise the RTC at boot (diff) | |
| download | linux-ae0d7cbc99890b3a417a5705763784b8551a10d6.tar.xz linux-ae0d7cbc99890b3a417a5705763784b8551a10d6.zip | |
MIPS: Malta: mux & enable SERIRQ interrupt
This patch causes the kernel to mux the SERIRQ interrupt to the SERIRQ
pin of the PIIX4 and to enable that interrupt. The kernel depends upon
the interrupt when using the SuperIO UARTs (ttyS0 & ttyS1) but
previously would not configure it, instead relying upon the bootloader
having done so. If that is not the case then the typical result is that
the system appears to hang once it reaches userland as no output is
displayed on the UART.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6182/
Diffstat (limited to 'arch/mips/pci/fixup-malta.c')
| -rw-r--r-- | arch/mips/pci/fixup-malta.c | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c index df36e2327c54..7a0eda782e35 100644 --- a/arch/mips/pci/fixup-malta.c +++ b/arch/mips/pci/fixup-malta.c @@ -54,6 +54,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) static void malta_piix_func0_fixup(struct pci_dev *pdev) { unsigned char reg_val; + u32 reg_val32; /* PIIX PIRQC[A:D] irq mappings */ static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = { 0, 0, 0, 3, @@ -83,6 +84,16 @@ static void malta_piix_func0_fixup(struct pci_dev *pdev) pci_write_config_byte(pdev, PIIX4_FUNC0_TOM, reg_val | PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK); } + + /* Mux SERIRQ to its pin */ + pci_read_config_dword(pdev, PIIX4_FUNC0_GENCFG, ®_val32); + pci_write_config_dword(pdev, PIIX4_FUNC0_GENCFG, + reg_val32 | PIIX4_FUNC0_GENCFG_SERIRQ); + + /* Enable SERIRQ */ + pci_read_config_byte(pdev, PIIX4_FUNC0_SERIRQC, ®_val); + reg_val |= PIIX4_FUNC0_SERIRQC_EN | PIIX4_FUNC0_SERIRQC_CONT; + pci_write_config_byte(pdev, PIIX4_FUNC0_SERIRQC, reg_val); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, |