powerpc/mm: Update definitions of DSISR bits

This updates the definitions for the various DSISR bits to
match both some historical stuff and to match new bits on
POWER9.

In addition, we define some masks corresponding to the "bad"
faults on Book3S, and some masks corresponding to the bits
that match between DSISR and SRR1 for a DSI and an ISI.

This comes with a small code update to change the definition
of DSISR_PGDIRFAULT which becomes DSISR_PRTABLE_FAULT to
match architecture 3.0B

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 59 insertions, 10 deletions

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index a3b6575c7842..73be2f71dbbb 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -272,16 +272,65 @@
 #define SPRN_DAR	0x013	/* Data Address Register */
 #define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
 #define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
-#define   DSISR_NOHPTE		0x40000000	/* no translation found */
-#define   DSISR_PROTFAULT	0x08000000	/* protection fault */
-#define   DSISR_BADACCESS	0x04000000	/* bad access to CI or G */
-#define   DSISR_ISSTORE		0x02000000	/* access was a store */
-#define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
-#define   DSISR_NOSEGMENT	0x00200000	/* SLB miss */
-#define   DSISR_KEYFAULT	0x00200000	/* Key fault */
-#define   DSISR_UNSUPP_MMU	0x00080000	/* Unsupported MMU config */
-#define   DSISR_SET_RC		0x00040000	/* Failed setting of R/C bits */
-#define   DSISR_PGDIRFAULT      0x00020000      /* Fault on page directory */
+#define   DSISR_BAD_DIRECT_ST	0x80000000 /* Obsolete: Direct store error */
+#define   DSISR_NOHPTE		0x40000000 /* no translation found */
+#define   DSISR_ATTR_CONFLICT	0x20000000 /* P9: Process vs. Partition attr */
+#define   DSISR_NOEXEC_OR_G	0x10000000 /* Alias of SRR1 bit, see below */
+#define   DSISR_PROTFAULT	0x08000000 /* protection fault */
+#define   DSISR_BADACCESS	0x04000000 /* bad access to CI or G */
+#define   DSISR_ISSTORE		0x02000000 /* access was a store */
+#define   DSISR_DABRMATCH	0x00400000 /* hit data breakpoint */
+#define   DSISR_NOSEGMENT	0x00200000 /* STAB miss (unsupported) */
+#define   DSISR_KEYFAULT	0x00200000 /* Storage Key fault */
+#define   DSISR_BAD_EXT_CTRL	0x00100000 /* Obsolete: External ctrl error */
+#define   DSISR_UNSUPP_MMU	0x00080000 /* P9: Unsupported MMU config */
+#define   DSISR_SET_RC		0x00040000 /* P9: Failed setting of R/C bits */
+#define   DSISR_PRTABLE_FAULT   0x00020000 /* P9: Fault on process table */
+#define   DSISR_ICSWX_NO_CT     0x00004000 /* P7: icswx unavailable cp type */
+#define   DSISR_BAD_COPYPASTE   0x00000008 /* P9: Copy/Paste on wrong memtype */
+#define   DSISR_BAD_AMO		0x00000004 /* P9: Incorrect AMO opcode */
+#define   DSISR_BAD_CI_LDST	0x00000002 /* P8: Bad HV CI load/store */
+
+/*
+ * DSISR_NOEXEC_OR_G doesn't actually exist. This bit is always
+ * 0 on DSIs. However, on ISIs, the corresponding bit in SRR1
+ * indicates an attempt at executing from a no-execute PTE
+ * or segment or from a guarded page.
+ *
+ * We add a definition here for completeness as we alias
+ * DSISR and SRR1 in do_page_fault.
+ */
+
+/*
+ * DSISR bits that are treated as a fault. Any bit set
+ * here will skip hash_page, and cause do_page_fault to
+ * trigger a SIGBUS or SIGSEGV:
+ */
+#define   DSISR_BAD_FAULT_32S	(DSISR_BAD_DIRECT_ST	| \
+				 DSISR_BADACCESS	| \
+				 DSISR_BAD_EXT_CTRL)
+#define	  DSISR_BAD_FAULT_64S	(DSISR_BAD_FAULT_32S	| \
+				 DSISR_ATTR_CONFLICT	| \
+				 DSISR_KEYFAULT		| \
+				 DSISR_UNSUPP_MMU	| \
+				 DSISR_PRTABLE_FAULT	| \
+				 DSISR_ICSWX_NO_CT	| \
+				 DSISR_BAD_COPYPASTE	| \
+				 DSISR_BAD_AMO		| \
+				 DSISR_BAD_CI_LDST)
+/*
+ * These bits are equivalent in SRR1 and DSISR for 0x400
+ * instruction access interrupts on Book3S
+ */
+#define   DSISR_SRR1_MATCH_32S	(DSISR_NOHPTE		| \
+				 DSISR_NOEXEC_OR_G	| \
+				 DSISR_PROTFAULT)
+#define   DSISR_SRR1_MATCH_64S	(DSISR_SRR1_MATCH_32S	| \
+				 DSISR_KEYFAULT		| \
+				 DSISR_UNSUPP_MMU	| \
+				 DSISR_SET_RC		| \
+				 DSISR_PRTABLE_FAULT)
+
 #define SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
 #define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
 #define SPRN_CIR	0x11B	/* Chip Information Register (hyper, R/0) */