diff options
| author | Shengyu Qu <wiagn233@outlook.com> | 2024-06-12 12:33:31 +0200 |
|---|---|---|
| committer | Conor Dooley <conor.dooley@microchip.com> | 2024-06-19 13:19:32 +0200 |
| commit | 3c1f81a1b554f49e99b34ca45324b35948c885db (patch) | |
| tree | d8be12e056fde5116a8c8cd9d7d1e16ed1cecdc9 /arch/riscv/boot | |
| parent | riscv: dts: canaan: Disable I/O devices unless used (diff) | |
| download | linux-3c1f81a1b554f49e99b34ca45324b35948c885db.tar.xz linux-3c1f81a1b554f49e99b34ca45324b35948c885db.zip | |
riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boards
Currently, for JH7110 boards with EMMC slot, vqmmc voltage for EMMC is
fixed to 1.8V, while the spec needs it to be 3.3V on low speed mode and
should support switching to 1.8V when using higher speed mode. Since
there are no other peripherals using the same voltage source of EMMC's
vqmmc(ALDO4) on every board currently supported by mainline kernel,
regulator-max-microvolt of ALDO4 should be set to 3.3V.
Cc: stable@vger.kernel.org
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Fixes: 7dafcfa79cc9 ("riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Diffstat (limited to 'arch/riscv/boot')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index 8ff6ea64f048..68d16717db8c 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -244,7 +244,7 @@ regulator-boot-on; regulator-always-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-name = "emmc_vdd"; }; }; |