sh: Consolidated SH7751/SH7780 PCI support.

This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 21 insertions, 63 deletions

diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/snapgear/io.c
index 9f700b8392bb..0f4824264557 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/snapgear/io.c
@@ -1,6 +1,4 @@
-/* 
- * linux/arch/sh/kernel/io_7751se.c
- *
+/*
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
  * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
  * Based largely on io_se.c.
@@ -11,54 +9,22 @@
  * placeholder code from io_se.c left in with the
  * expectation of later SuperIO and PCMCIA access.
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <asm/io.h>
 #include <asm/addrspace.h>
 
-#include <asm/pci.h>
-#include "../../drivers/pci/pci-sh7751.h"
-
 #ifdef CONFIG_SH_SECUREEDGE5410
 unsigned short secureedge5410_ioport;
 #endif
 
-/*
- * The SnapGear uses the built-in PCI controller (PCIC)
- * of the 7751 processor
- */
-
-#define PCIIOBR		(volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR          (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA	SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA	SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
 static inline volatile __u16 *port2adr(unsigned int port)
 {
 	maybebadio((unsigned long)port);
 	return (volatile __u16*)port;
 }
 
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
-  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
 /*
  * General outline: remap really low stuff [eventually] to SuperIO,
  * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
@@ -66,39 +32,36 @@ static inline volatile __u16 *port2adr(unsigned int port)
  * should be way beyond the window, and is used  w/o translation for
  * compatibility.
  */
-
 unsigned char snapgear_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
-		return (*port2adr(port))&0xff; 
+		return (*port2adr(port)) & 0xff;
 }
 
-
 unsigned char snapgear_inb_p(unsigned long port)
 {
 	unsigned char v;
 
 	if (PXSEG(port))
 		v = *(volatile unsigned char *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		v = *(volatile unsigned char *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
-		v = (*port2adr(port))&0xff; 
-	delay();
+		v = (*port2adr(port))&0xff;
+	ctrl_delay();
 	return v;
 }
 
-
 unsigned short snapgear_inw(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned short *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned short *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -106,13 +69,12 @@ unsigned short snapgear_inw(unsigned long port)
 	return 0;
 }
 
-
 unsigned int snapgear_inl(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned long *)port;
-	else if (CHECK_SH7751_PCIIO(port))
-		return *(volatile unsigned int *)PCI_IOMAP(port);
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -120,50 +82,46 @@ unsigned int snapgear_inl(unsigned long port)
 	return 0;
 }
 
-
 void snapgear_outb(unsigned char value, unsigned long port)
 {
 
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 }
 
-
 void snapgear_outb_p(unsigned char value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned char*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
-	delay();
+	ctrl_delay();
 }
 
-
 void snapgear_outw(unsigned short value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned short *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned short *)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
 		maybebadio(port);
 }
 
-
 void snapgear_outl(unsigned int value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned long *)port = value;
-	else if (CHECK_SH7751_PCIIO(port))
-		*((unsigned long*)PCI_IOMAP(port)) = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
 		maybebadio(port);
 }