sh: Add support for R7780RP and R7780MP boards.

This adds support for the Renesas SH7780 development boards,
R7780RP and R7780MP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

6 files changed, 690 insertions, 0 deletions

diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig
new file mode 100644
index 000000000000..c26d9813d239
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/Kconfig
@@ -0,0 +1,14 @@
+if SH_R7780RP
+
+menu "R7780RP options"
+
+config SH_R7780MP
+	bool "R7780MP board support"
+	default y
+	help
+	  Selecting this option will enable support for the mass-production
+	  version of the R7780RP. If in doubt, say Y.
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
new file mode 100644
index 000000000000..f1776d027978
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the R7780RP-1 specific parts of the kernel
+#
+
+obj-y	 := setup.o io.o irq.o
+obj-$(CONFIG_HEARTBEAT)	+= led.o
diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c
new file mode 100644
index 000000000000..f73ca3f0f5a1
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/io.c
@@ -0,0 +1,338 @@
+/*
+ * linux/arch/sh/kernel/io_r7780rp.c
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for Renesas Solutions Highlander R7780RP-1
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_r7780rp.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/r7780rp/r7780rp.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include "../../../drivers/pci/pci-sh7780.h"
+
+/*
+ * The 7780 R7780RP-1 uses the built-in PCI controller (PCIC)
+ * of the 7780 processor, and has a SuperIO accessible via the PCI.
+ * The board also includes a PCMCIA controller on its memory bus,
+ * like the other Solution Engine boards.
+ */
+
+#define	SH7780_PCIIOBR_MASK	0xFFFC0000	/* IO Space Mask */
+#define PCIIOBR		(volatile long *)PCI_REG(SH7780_PCIIOBR)
+#define PCIMBR          (volatile long *)PCI_REG(SH7780_PCIMBR)
+#define PCI_IO_AREA	SH7780_PCI_IO_BASE
+#define PCI_MEM_AREA	SH7780_PCI_CONFIG_BASE
+
+#define PCI_IOMAP(adr)	(PCI_IO_AREA + (adr & ~SH7780_PCIIOBR_MASK))
+
+static inline void delay(void)
+{
+	ctrl_inw(0xa0000000);
+}
+
+static inline unsigned long port2adr(unsigned int port)
+{
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		if (port == 0x3f6)
+			return (PA_AREA5_IO + 0x80c);
+		else
+			return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1));
+	else
+		maybebadio((unsigned long)port);
+
+	return port;
+}
+
+static inline unsigned long port88796l(unsigned int port, int flag)
+{
+	unsigned long addr;
+
+	if (flag)
+		addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1);
+	else
+		addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000;
+
+	return addr;
+}
+
+/* The 7780 R7780RP-1 seems to have everything hooked */
+/* up pretty normally (nothing on high-bytes only...) so this */
+/* shouldn't be needed */
+static inline int shifted_port(unsigned long port)
+{
+	/* For IDE registers, value is not shifted */
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		return 0;
+	else
+		return 1;
+}
+
+/* In case someone configures the kernel w/o PCI support: in that */
+/* scenario, don't ever bother to check for PCI-window addresses */
+
+/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
+#if defined(CONFIG_PCI)
+#define CHECK_SH7780_PCIIO(port) \
+  ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7780_PCI_IO_SIZE)))
+#else
+#define CHECK_SH7780_PCIIO(port) (0)
+#endif
+
+#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
+#define CHECK_AX88796L_PORT(port) \
+  ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
+#else
+#define CHECK_AX88796L_PORT(port) (0)
+#endif
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used  w/o translation for
+ * compatibility.
+ */
+u8 r7780rp_inb(unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		return ctrl_inw(port88796l(port, 0)) & 0xff;
+	else if (PXSEG(port))
+		return ctrl_inb(port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		return ctrl_inb(PCI_IOMAP(port));
+
+	return ctrl_inw(port2adr(port)) & 0xff;
+}
+
+u8 r7780rp_inb_p(unsigned long port)
+{
+	u8 v;
+
+	if (CHECK_AX88796L_PORT(port))
+		v = ctrl_inw(port88796l(port, 0)) & 0xff;
+	else if (PXSEG(port))
+		v = ctrl_inb(port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		v = ctrl_inb(PCI_IOMAP(port));
+	else
+		v = ctrl_inw(port2adr(port)) & 0xff;
+
+	delay();
+
+	return v;
+}
+
+u16 r7780rp_inw(unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (PXSEG(port))
+		return ctrl_inw(port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		return ctrl_inw(PCI_IOMAP(port));
+	else
+		maybebadio(port);
+
+	return 0;
+}
+
+u32 r7780rp_inl(unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (PXSEG(port))
+		return ctrl_inl(port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		return ctrl_inl(PCI_IOMAP(port));
+	else
+		maybebadio(port);
+
+	return 0;
+}
+
+void r7780rp_outb(u8 value, unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		ctrl_outw(value, port88796l(port, 0));
+	else if (PXSEG(port))
+		ctrl_outb(value, port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		ctrl_outb(value, PCI_IOMAP(port));
+	else
+		ctrl_outw(value, port2adr(port));
+}
+
+void r7780rp_outb_p(u8 value, unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		ctrl_outw(value, port88796l(port, 0));
+	else if (PXSEG(port))
+		ctrl_outb(value, port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		ctrl_outb(value, PCI_IOMAP(port));
+	else
+		ctrl_outw(value, port2adr(port));
+
+	delay();
+}
+
+void r7780rp_outw(u16 value, unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (PXSEG(port))
+		ctrl_outw(value, port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		ctrl_outw(value, PCI_IOMAP(port));
+	else
+		maybebadio(port);
+}
+
+void r7780rp_outl(u32 value, unsigned long port)
+{
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (PXSEG(port))
+		ctrl_outl(value, port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		ctrl_outl(value, PCI_IOMAP(port));
+	else
+		maybebadio(port);
+}
+
+void r7780rp_insb(unsigned long port, void *dst, unsigned long count)
+{
+	volatile u16 *p;
+	u8 *buf = dst;
+
+	if (CHECK_AX88796L_PORT(port)) {
+		p = (volatile u16 *)port88796l(port, 0);
+		while (count--)
+			*buf++ = *p & 0xff;
+	} else if (PXSEG(port)) {
+		while (count--)
+			*buf++ = *(volatile u8 *)port;
+	} else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) {
+		volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port);
+
+		while (count--)
+			*buf++ = *bp;
+	} else {
+		p = (volatile u16 *)port2adr(port);
+		while (count--)
+			*buf++ = *p & 0xff;
+	}
+}
+
+void r7780rp_insw(unsigned long port, void *dst, unsigned long count)
+{
+	volatile u16 *p;
+	u16 *buf = dst;
+
+	if (CHECK_AX88796L_PORT(port))
+		p = (volatile u16 *)port88796l(port, 1);
+	else if (PXSEG(port))
+		p = (volatile u16 *)port;
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		p = (volatile u16 *)PCI_IOMAP(port);
+	else
+		p = (volatile u16 *)port2adr(port);
+
+	while (count--)
+		*buf++ = *p;
+}
+
+void r7780rp_insl(unsigned long port, void *dst, unsigned long count)
+{
+	u32 *buf = dst;
+
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) {
+		volatile u32 *p = (volatile u32 *)PCI_IOMAP(port);
+
+		while (count--)
+			*buf++ = *p;
+	} else
+		maybebadio(port);
+}
+
+void r7780rp_outsb(unsigned long port, const void *src, unsigned long count)
+{
+	volatile u16 *p;
+	const u8 *buf = src;
+
+	if (CHECK_AX88796L_PORT(port)) {
+		p = (volatile u16 *)port88796l(port, 0);
+		while (count--)
+			*p = *buf++;
+	} else if (PXSEG(port))
+		while (count--)
+			ctrl_outb(*buf++, port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) {
+		volatile u8 *bp = (volatile u8 *)PCI_IOMAP(port);
+
+		while (count--)
+			*bp = *buf++;
+	} else {
+		p = (volatile u16 *)port2adr(port);
+		while (count--)
+			*p = *buf++;
+	}
+}
+
+void r7780rp_outsw(unsigned long port, const void *src, unsigned long count)
+{
+	volatile u16 *p;
+	const u16 *buf = src;
+
+	if (CHECK_AX88796L_PORT(port))
+		p = (volatile u16 *)port88796l(port, 1);
+	else if (PXSEG(port))
+		p = (volatile u16 *)port;
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		p = (volatile u16 *)PCI_IOMAP(port);
+	else
+		p = (volatile u16 *)port2adr(port);
+
+	while (count--)
+		*p = *buf++;
+}
+
+void r7780rp_outsl(unsigned long port, const void *src, unsigned long count)
+{
+	const u32 *buf = src;
+
+	if (CHECK_AX88796L_PORT(port))
+		maybebadio(port);
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port)) {
+		volatile u32 *p = (volatile u32 *)PCI_IOMAP(port);
+
+		while (count--)
+			*p = *buf++;
+	} else
+		maybebadio(port);
+}
+
+void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size)
+{
+	if (CHECK_AX88796L_PORT(port))
+		return (void __iomem *)port88796l(port, size > 1);
+	else if (PXSEG(port))
+		return (void __iomem *)port;
+	else if (CHECK_SH7780_PCIIO(port) || shifted_port(port))
+		return (void __iomem *)PCI_IOMAP(port);
+
+	return (void __iomem *)port2adr(port);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c
new file mode 100644
index 000000000000..c7b9fe6e640d
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/sh/boards/renesas/r7780rp/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Modified for R7780RP-1 by
+ * Atom Create Engineering Co., Ltd. 2002.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/r7780rp/r7780rp.h>
+
+#ifdef CONFIG_SH_R7780MP
+static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
+#else
+static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0};
+#endif
+
+static void enable_r7780rp_irq(unsigned int irq);
+static void disable_r7780rp_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_r7780rp_irq disable_r7780rp_irq
+
+static void ack_r7780rp_irq(unsigned int irq);
+static void end_r7780rp_irq(unsigned int irq);
+
+static unsigned int startup_r7780rp_irq(unsigned int irq)
+{
+	enable_r7780rp_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void disable_r7780rp_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
+
+	/* Set the priority in IPR to 0 */
+	local_irq_save(flags);
+	val = ctrl_inw(IRLCNTR1);
+	val &= mask;
+	ctrl_outw(val, IRLCNTR1);
+	local_irq_restore(flags);
+}
+
+static void enable_r7780rp_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned short val;
+	unsigned short value = (0x0001 << mask_pos[irq]);
+
+	/* Set priority in IPR back to original value */
+	local_irq_save(flags);
+	val = ctrl_inw(IRLCNTR1);
+	val |= value;
+	ctrl_outw(val, IRLCNTR1);
+	local_irq_restore(flags);
+}
+
+static void ack_r7780rp_irq(unsigned int irq)
+{
+	disable_r7780rp_irq(irq);
+}
+
+static void end_r7780rp_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_r7780rp_irq(irq);
+}
+
+static struct hw_interrupt_type r7780rp_irq_type = {
+	.typename = "R7780RP-IRQ",
+	.startup = startup_r7780rp_irq,
+	.shutdown = shutdown_r7780rp_irq,
+	.enable = enable_r7780rp_irq,
+	.disable = disable_r7780rp_irq,
+	.ack = ack_r7780rp_irq,
+	.end = end_r7780rp_irq,
+};
+
+static void make_r7780rp_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &r7780rp_irq_type;
+	disable_r7780rp_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_r7780rp_IRQ(void)
+{
+	int i;
+
+	/* IRL0=PCI Slot #A
+	 * IRL1=PCI Slot #B
+	 * IRL2=PCI Slot #C
+	 * IRL3=PCI Slot #D
+	 * IRL4=CF Card
+	 * IRL5=CF Card Insert
+	 * IRL6=M66596
+	 * IRL7=SD Card
+	 * IRL8=Touch Panel
+	 * IRL9=SCI
+	 * IRL10=Serial
+	 * IRL11=Extention #A
+	 * IRL11=Extention #B
+	 * IRL12=Debug LAN
+	 * IRL13=Push Switch
+	 * IRL14=ZiggBee IO
+	 */
+
+	for (i=0; i<15; i++)
+		make_r7780rp_irq(i);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/led.c b/arch/sh/boards/renesas/r7780rp/led.c
new file mode 100644
index 000000000000..9f02766b6f53
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/led.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) Atom Create Engineering Co., Ltd.
+ *
+ * May be copied or modified under the terms of GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <asm/io.h>
+#include <asm/r7780rp/r7780rp.h>
+
+/* Cycle the LED's in the clasic Knightriger/Sun pattern */
+void heartbeat_r7780rp(void)
+{
+	static unsigned int cnt = 0, period = 0;
+	volatile unsigned short *p = (volatile unsigned short *)PA_OBLED;
+	static unsigned bit = 0, up = 1;
+	unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7};
+
+	cnt += 1;
+	if (cnt < period)
+		return;
+
+	cnt = 0;
+
+	/* Go through the points (roughly!):
+	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
+	 */
+	period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
+
+	*p = 1 << bit_pos[bit];
+	if (up)
+		if (bit == 7) {
+			bit--;
+			up = 0;
+		} else
+			bit++;
+	else if (bit == 0)
+		up = 1;
+	else
+		bit--;
+}
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
new file mode 100644
index 000000000000..0e4d5e1b541c
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -0,0 +1,164 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/setup.c
+ *
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005, 2006 Paul Mundt
+ *
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/r7780rp/r7780rp.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+
+extern void heartbeat_r7780rp(void);
+extern void init_r7780rp_IRQ(void);
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_r7780rp __initmv = {
+	.mv_nr_irqs		= 109,
+
+	.mv_inb			= r7780rp_inb,
+	.mv_inw			= r7780rp_inw,
+	.mv_inl			= r7780rp_inl,
+	.mv_outb		= r7780rp_outb,
+	.mv_outw		= r7780rp_outw,
+	.mv_outl		= r7780rp_outl,
+
+	.mv_inb_p		= r7780rp_inb_p,
+	.mv_inw_p		= r7780rp_inw,
+	.mv_inl_p		= r7780rp_inl,
+	.mv_outb_p		= r7780rp_outb_p,
+	.mv_outw_p		= r7780rp_outw,
+	.mv_outl_p		= r7780rp_outl,
+
+	.mv_insb		= r7780rp_insb,
+	.mv_insw		= r7780rp_insw,
+	.mv_insl		= r7780rp_insl,
+	.mv_outsb		= r7780rp_outsb,
+	.mv_outsw		= r7780rp_outsw,
+	.mv_outsl		= r7780rp_outsl,
+
+	.mv_ioport_map		= r7780rp_ioport_map,
+	.mv_init_irq		= init_r7780rp_IRQ,
+#ifdef CONFIG_HEARTBEAT
+	.mv_heartbeat		= heartbeat_r7780rp,
+#endif
+};
+ALIAS_MV(r7780rp)
+
+static struct resource m66596_usb_host_resources[] = {
+	[0] = {
+		.start	= 0xa4800000,
+		.end	= 0xa4ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 6,		/* irq number */
+		.end	= 6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66596_usb_host_device = {
+	.name		= "m66596-hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(m66596_usb_host_resources),
+	.resource	= m66596_usb_host_resources,
+};
+
+static struct platform_device *r7780rp_devices[] __initdata = {
+	&m66596_usb_host_device,
+};
+
+static int __init r7780rp_devices_setup(void)
+{
+	return platform_add_devices(r7780rp_devices,
+				    ARRAY_SIZE(r7780rp_devices));
+}
+__initcall(r7780rp_devices_setup);
+
+/*
+ * Platform specific clocks
+ */
+static void ivdr_clk_enable(struct clk *clk)
+{
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << 8), PA_IVDRCTL);
+}
+
+static void ivdr_clk_disable(struct clk *clk)
+{
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << 8), PA_IVDRCTL);
+}
+
+static struct clk_ops ivdr_clk_ops = {
+	.enable		= ivdr_clk_enable,
+	.disable	= ivdr_clk_disable,
+};
+
+static struct clk ivdr_clk = {
+	.name		= "ivdr_clk",
+	.ops		= &ivdr_clk_ops,
+};
+
+static struct clk *r7780rp_clocks[] = {
+	&ivdr_clk,
+};
+
+const char *get_system_type(void)
+{
+	return "Highlander R7780RP-1";
+}
+
+static void r7780rp_power_off(void)
+{
+#ifdef CONFIG_SH_R7780MP
+	ctrl_outw(0x0001, PA_POFF);
+#endif
+}
+
+/*
+ * Initialize the board
+ */
+void __init platform_setup(void)
+{
+	u16 ver = ctrl_inw(PA_VERREG);
+	int i;
+
+	printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
+
+	printk(KERN_INFO "Board version: %d (revision %d), "
+			 "FPGA version: %d (revision %d)\n",
+			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+			 (ver >>  4) & 0xf, ver & 0xf);
+
+	/*
+	 * Enable the important clocks right away..
+	 */
+	for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
+		struct clk *clk = r7780rp_clocks[i];
+
+		clk_register(clk);
+		clk_enable(clk);
+	}
+
+	ctrl_outw(0x0000, PA_OBLED);	/* Clear LED. */
+#ifndef CONFIG_SH_R7780MP
+	ctrl_outw(0x0001, PA_SDPOW);	/* SD Power ON */
+#endif
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL);	/* Si13112 */
+
+	pm_power_off = r7780rp_power_off;
+}