Merge branch 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 old platform removal from Peter Anvin:
 "This patchset removes support for several completely obsolete
  platforms, where the maintainers either have completely vanished or
  acked the removal.  For some of them it is questionable if there even
  exists functional specimens of the hardware"

Geert Uytterhoeven apparently thought this was a April Fool's pull request ;)

* 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, platforms: Remove NUMAQ
  x86, platforms: Remove SGI Visual Workstation
  x86, apic: Remove support for IBM Summit/EXA chipset
  x86, apic: Remove support for ia32-based Unisys ES7000

1 files changed, 9 insertions, 73 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ac04d9804391..f73071742975 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -344,12 +344,9 @@ config X86_EXTENDED_PLATFORM
 	  for the following (non-PC) 32 bit x86 platforms:
 		Goldfish (Android emulator)
 		AMD Elan
-		NUMAQ (IBM/Sequent)
 		RDC R-321x SoC
 		SGI 320/540 (Visual Workstation)
 		STA2X11-based (e.g. Northville)
-		Summit/EXA (IBM x440)
-		Unisys ES7000 IA32 series
 		Moorestown MID devices
 
 	  If you have one of these systems, or if you want to build a
@@ -487,49 +484,22 @@ config X86_32_NON_STANDARD
 	depends on X86_32 && SMP
 	depends on X86_EXTENDED_PLATFORM
 	---help---
-	  This option compiles in the NUMAQ, Summit, bigsmp, ES7000,
-	  STA2X11, default subarchitectures.  It is intended for a generic
-	  binary kernel. If you select them all, kernel will probe it
-	  one by one and will fallback to default.
+	  This option compiles in the bigsmp and STA2X11 default
+	  subarchitectures.  It is intended for a generic binary
+	  kernel. If you select them all, kernel will probe it one by
+	  one and will fallback to default.
 
 # Alphabetically sorted list of Non standard 32 bit platforms
 
-config X86_NUMAQ
-	bool "NUMAQ (IBM/Sequent)"
-	depends on X86_32_NON_STANDARD
-	depends on PCI
-	select NUMA
-	select X86_MPPARSE
-	---help---
-	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
-	  NUMA multiquad box. This changes the way that processors are
-	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
-	  of Flat Logical.  You will need a new lynxer.elf file to flash your
-	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
-
 config X86_SUPPORTS_MEMORY_FAILURE
 	def_bool y
 	# MCE code calls memory_failure():
 	depends on X86_MCE
 	# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
-	depends on !X86_NUMAQ
 	# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
 	depends on X86_64 || !SPARSEMEM
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 
-config X86_VISWS
-	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
-	depends on X86_32_NON_STANDARD
-	---help---
-	  The SGI Visual Workstation series is an IA32-based workstation
-	  based on SGI systems chips with some legacy PC hardware attached.
-
-	  Say Y here to create a kernel to run on the SGI 320 or 540.
-
-	  A kernel compiled for the Visual Workstation will run on general
-	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
-
 config STA2X11
 	bool "STA2X11 Companion Chip Support"
 	depends on X86_32_NON_STANDARD && PCI
@@ -546,20 +516,6 @@ config STA2X11
 	  option is selected the kernel will still be able to boot on
 	  standard PC machines.
 
-config X86_SUMMIT
-	bool "Summit/EXA (IBM x440)"
-	depends on X86_32_NON_STANDARD
-	---help---
-	  This option is needed for IBM systems that use the Summit/EXA chipset.
-	  In particular, it is needed for the x440.
-
-config X86_ES7000
-	bool "Unisys ES7000 IA32 series"
-	depends on X86_32_NON_STANDARD && X86_BIGSMP
-	---help---
-	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
-	  supposed to run on an IA32-based Unisys ES7000 system.
-
 config X86_32_IRIS
 	tristate "Eurobraille/Iris poweroff module"
 	depends on X86_32
@@ -682,14 +638,6 @@ config MEMTEST
 	        memtest=4, mean do 4 test patterns.
 	  If you are unsure how to answer this question, answer N.
 
-config X86_SUMMIT_NUMA
-	def_bool y
-	depends on X86_32 && NUMA && X86_32_NON_STANDARD
-
-config X86_CYCLONE_TIMER
-	def_bool y
-	depends on X86_SUMMIT
-
 source "arch/x86/Kconfig.cpu"
 
 config HPET_TIMER
@@ -818,7 +766,7 @@ config NR_CPUS
 	range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
 	default "1" if !SMP
 	default "8192" if MAXSMP
-	default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
+	default "32" if SMP && X86_BIGSMP
 	default "8" if SMP
 	---help---
 	  This allows you to specify the maximum number of CPUs which this
@@ -882,10 +830,6 @@ config X86_IO_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
 
-config X86_VISWS_APIC
-	def_bool y
-	depends on X86_32 && X86_VISWS
-
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
 	depends on X86_IO_APIC
@@ -1103,13 +1047,11 @@ config X86_CPUID
 
 choice
 	prompt "High Memory Support"
-	default HIGHMEM64G if X86_NUMAQ
 	default HIGHMEM4G
 	depends on X86_32
 
 config NOHIGHMEM
 	bool "off"
-	depends on !X86_NUMAQ
 	---help---
 	  Linux can use up to 64 Gigabytes of physical memory on x86 systems.
 	  However, the address space of 32-bit x86 processors is only 4
@@ -1146,7 +1088,6 @@ config NOHIGHMEM
 
 config HIGHMEM4G
 	bool "4GB"
-	depends on !X86_NUMAQ
 	---help---
 	  Select this if you have a 32-bit processor and between 1 and 4
 	  gigabytes of physical RAM.
@@ -1238,8 +1179,8 @@ config DIRECT_GBPAGES
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support"
 	depends on SMP
-	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI))
-	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
+	depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP)
+	default y if X86_BIGSMP
 	---help---
 	  Enable NUMA (Non Uniform Memory Access) support.
 
@@ -1250,15 +1191,11 @@ config NUMA
 	  For 64-bit this is recommended if the system is Intel Core i7
 	  (or later), AMD Opteron, or EM64T NUMA.
 
-	  For 32-bit this is only needed on (rare) 32-bit-only platforms
-	  that support NUMA topologies, such as NUMAQ / Summit, or if you
-	  boot a 32-bit kernel on a 64-bit NUMA platform.
+	  For 32-bit this is only needed if you boot a 32-bit
+	  kernel on a 64-bit NUMA platform.
 
 	  Otherwise, you should say N.
 
-comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
-	depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
-
 config AMD_NUMA
 	def_bool y
 	prompt "Old style AMD Opteron NUMA detection"
@@ -1300,7 +1237,6 @@ config NODES_SHIFT
 	range 1 10
 	default "10" if MAXSMP
 	default "6" if X86_64
-	default "4" if X86_NUMAQ
 	default "3"
 	depends on NEED_MULTIPLE_NODES
 	---help---