Merge tag 'mvebu-drivers-4.2' of git://git.infradead.org/linux-mvebu into next/drivers

Merge "mvebu drivers change for 4.2" from Gregory CLEMENT:

mvebu-mbus: add mv_mbus_dram_info_nooverlap() needed for the new
Marvell crypto driver

* tag 'mvebu-drivers-4.2' of git://git.infradead.org/linux-mvebu:
  bus: mvebu-mbus: add mv_mbus_dram_info_nooverlap()

Based on the earlier bug fixes branch, which contains six other
patches already merged into 4.1.

1 files changed, 83 insertions, 37 deletions

diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index fb9ec6221730..c43c3d2baf73 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -57,8 +57,8 @@
 #include <linux/of_address.h>
 #include <linux/debugfs.h>
 #include <linux/log2.h>
-#include <linux/syscore_ops.h>
 #include <linux/memblock.h>
+#include <linux/syscore_ops.h>
 
 /*
  * DDR target is the same on all platforms.
@@ -70,6 +70,7 @@
  */
 #define WIN_CTRL_OFF		0x0000
 #define   WIN_CTRL_ENABLE       BIT(0)
+/* Only on HW I/O coherency capable platforms */
 #define   WIN_CTRL_SYNCBARRIER  BIT(1)
 #define   WIN_CTRL_TGT_MASK     0xf0
 #define   WIN_CTRL_TGT_SHIFT    4
@@ -102,9 +103,7 @@
 
 /* Relative to mbusbridge_base */
 #define MBUS_BRIDGE_CTRL_OFF	0x0
-#define  MBUS_BRIDGE_SIZE_MASK  0xffff0000
 #define MBUS_BRIDGE_BASE_OFF	0x4
-#define  MBUS_BRIDGE_BASE_MASK  0xffff0000
 
 /* Maximum number of windows, for all known platforms */
 #define MBUS_WINS_MAX           20
@@ -154,13 +153,39 @@ struct mvebu_mbus_state {
 
 static struct mvebu_mbus_state mbus_state;
 
+/*
+ * We provide two variants of the mv_mbus_dram_info() function:
+ *
+ * - The normal one, where the described DRAM ranges may overlap with
+ *   the I/O windows, but for which the DRAM ranges are guaranteed to
+ *   have a power of two size. Such ranges are suitable for the DMA
+ *   masters that only DMA between the RAM and the device, which is
+ *   actually all devices except the crypto engines.
+ *
+ * - The 'nooverlap' one, where the described DRAM ranges are
+ *   guaranteed to not overlap with the I/O windows, but for which the
+ *   DRAM ranges will not have power of two sizes. They will only be
+ *   aligned on a 64 KB boundary, and have a size multiple of 64
+ *   KB. Such ranges are suitable for the DMA masters that DMA between
+ *   the crypto SRAM (which is mapped through an I/O window) and a
+ *   device. This is the case for the crypto engines.
+ */
+
 static struct mbus_dram_target_info mvebu_mbus_dram_info;
+static struct mbus_dram_target_info mvebu_mbus_dram_info_nooverlap;
+
 const struct mbus_dram_target_info *mv_mbus_dram_info(void)
 {
 	return &mvebu_mbus_dram_info;
 }
 EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
 
+const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(void)
+{
+	return &mvebu_mbus_dram_info_nooverlap;
+}
+EXPORT_SYMBOL_GPL(mv_mbus_dram_info_nooverlap);
+
 /* Checks whether the given window has remap capability */
 static bool mvebu_mbus_window_is_remappable(struct mvebu_mbus_state *mbus,
 					    const int win)
@@ -323,8 +348,9 @@ static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus,
 	ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
 		(attr << WIN_CTRL_ATTR_SHIFT)    |
 		(target << WIN_CTRL_TGT_SHIFT)   |
-		WIN_CTRL_SYNCBARRIER             |
 		WIN_CTRL_ENABLE;
+	if (mbus->hw_io_coherency)
+		ctrl |= WIN_CTRL_SYNCBARRIER;
 
 	writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
 	writel(ctrl, addr + WIN_CTRL_OFF);
@@ -592,7 +618,7 @@ mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
 		 * This part of the memory is above 4 GB, so we don't
 		 * care for the MBus bridge hole.
 		 */
-		if (r->base >= 0x100000000)
+		if (r->base >= 0x100000000ULL)
 			continue;
 
 		/*
@@ -604,50 +630,33 @@ mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
 	}
 
 	*start = s;
-	*end = 0x100000000;
+	*end = 0x100000000ULL;
 }
 
+/*
+ * This function fills in the mvebu_mbus_dram_info_nooverlap data
+ * structure, by looking at the mvebu_mbus_dram_info data, and
+ * removing the parts of it that overlap with I/O windows.
+ */
 static void __init
-mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
+mvebu_mbus_setup_cpu_target_nooverlap(struct mvebu_mbus_state *mbus)
 {
-	int i;
-	int cs;
 	uint64_t mbus_bridge_base, mbus_bridge_end;
-
-	mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+	int cs_nooverlap = 0;
+	int i;
 
 	mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
 
-	for (i = 0, cs = 0; i < 4; i++) {
-		u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
-		u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
-		u64 end;
+	for (i = 0; i < mvebu_mbus_dram_info.num_cs; i++) {
 		struct mbus_dram_window *w;
+		u64 base, size, end;
 
-		/* Ignore entries that are not enabled */
-		if (!(size & DDR_SIZE_ENABLED))
-			continue;
-
-		/*
-		 * Ignore entries whose base address is above 2^32,
-		 * since devices cannot DMA to such high addresses
-		 */
-		if (base & DDR_BASE_CS_HIGH_MASK)
-			continue;
-
-		base = base & DDR_BASE_CS_LOW_MASK;
-		size = (size | ~DDR_SIZE_MASK) + 1;
+		w = &mvebu_mbus_dram_info.cs[i];
+		base = w->base;
+		size = w->size;
 		end = base + size;
 
 		/*
-		 * Adjust base/size of the current CS to make sure it
-		 * doesn't overlap with the MBus bridge hole. This is
-		 * particularly important for devices that do DMA from
-		 * DRAM to a SRAM mapped in a MBus window, such as the
-		 * CESA cryptographic engine.
-		 */
-
-		/*
 		 * The CS is fully enclosed inside the MBus bridge
 		 * area, so ignore it.
 		 */
@@ -670,7 +679,7 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
 		if (base < mbus_bridge_base && end > mbus_bridge_base)
 			size -= end - mbus_bridge_base;
 
-		w = &mvebu_mbus_dram_info.cs[cs++];
+		w = &mvebu_mbus_dram_info_nooverlap.cs[cs_nooverlap++];
 		w->cs_index = i;
 		w->mbus_attr = 0xf & ~(1 << i);
 		if (mbus->hw_io_coherency)
@@ -678,6 +687,42 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
 		w->base = base;
 		w->size = size;
 	}
+
+	mvebu_mbus_dram_info_nooverlap.mbus_dram_target_id = TARGET_DDR;
+	mvebu_mbus_dram_info_nooverlap.num_cs = cs_nooverlap;
+}
+
+static void __init
+mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
+{
+	int i;
+	int cs;
+
+	mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 4; i++) {
+		u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+		u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+
+		/*
+		 * We only take care of entries for which the chip
+		 * select is enabled, and that don't have high base
+		 * address bits set (devices can only access the first
+		 * 32 bits of the memory).
+		 */
+		if ((size & DDR_SIZE_ENABLED) &&
+		    !(base & DDR_BASE_CS_HIGH_MASK)) {
+			struct mbus_dram_window *w;
+
+			w = &mvebu_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0xf & ~(1 << i);
+			if (mbus->hw_io_coherency)
+				w->mbus_attr |= ATTR_HW_COHERENCY;
+			w->base = base & DDR_BASE_CS_LOW_MASK;
+			w->size = (size | ~DDR_SIZE_MASK) + 1;
+		}
+	}
 	mvebu_mbus_dram_info.num_cs = cs;
 }
 
@@ -1035,6 +1080,7 @@ static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
 		mvebu_mbus_disable_window(mbus, win);
 
 	mbus->soc->setup_cpu_target(mbus);
+	mvebu_mbus_setup_cpu_target_nooverlap(mbus);
 
 	if (is_coherent)
 		writel(UNIT_SYNC_BARRIER_ALL,