summaryrefslogtreecommitdiffstats
path: root/drivers/clk/meson
diff options
context:
space:
mode:
authorMartin Blumenstingl <martin.blumenstingl@googlemail.com>2021-06-28 00:39:59 +0200
committerStephen Boyd <sboyd@kernel.org>2021-06-30 20:37:02 +0200
commite4c5ef6b9584a861210cf92955b7c8b1727688b9 (patch)
tree0ae1068c1602cbc6cca46e1025d4d2aff361898c /drivers/clk/meson
parentclk: divider: Switch from .round_rate to .determine_rate by default (diff)
downloadlinux-e4c5ef6b9584a861210cf92955b7c8b1727688b9.tar.xz
linux-e4c5ef6b9584a861210cf92955b7c8b1727688b9.zip
clk: meson: regmap: switch to determine_rate for the dividers
This increases the maxmium supported frequency on 32-bit systems from 2^31 (signed long as used by clk_ops.round_rate, maximum value: approx. 2.14GHz) to 2^32 (unsigned long as used by clk_ops.determine_rate, maximum value: approx. 4.29GHz). On Meson8/8b/8m2 the HDMI PLL and it's OD (post-dividers) are capable of running at up to 2.97GHz. So switch the divider implementation in clk-regmap to clk_ops.determine_rate to support these higher frequencies on 32-bit systems. Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210627223959.188139-4-martin.blumenstingl@googlemail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Diffstat (limited to 'drivers/clk/meson')
-rw-r--r--drivers/clk/meson/clk-regmap.c19
1 files changed, 9 insertions, 10 deletions
diff --git a/drivers/clk/meson/clk-regmap.c b/drivers/clk/meson/clk-regmap.c
index dcd1757cc5df..8ad8977cf1c2 100644
--- a/drivers/clk/meson/clk-regmap.c
+++ b/drivers/clk/meson/clk-regmap.c
@@ -75,8 +75,8 @@ static unsigned long clk_regmap_div_recalc_rate(struct clk_hw *hw,
div->width);
}
-static long clk_regmap_div_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
+static int clk_regmap_div_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
@@ -87,18 +87,17 @@ static long clk_regmap_div_round_rate(struct clk_hw *hw, unsigned long rate,
if (div->flags & CLK_DIVIDER_READ_ONLY) {
ret = regmap_read(clk->map, div->offset, &val);
if (ret)
- /* Gives a hint that something is wrong */
- return 0;
+ return ret;
val >>= div->shift;
val &= clk_div_mask(div->width);
- return divider_ro_round_rate(hw, rate, prate, div->table,
- div->width, div->flags, val);
+ return divider_ro_determine_rate(hw, req, div->table,
+ div->width, div->flags, val);
}
- return divider_round_rate(hw, rate, prate, div->table, div->width,
- div->flags);
+ return divider_determine_rate(hw, req, div->table, div->width,
+ div->flags);
}
static int clk_regmap_div_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -123,14 +122,14 @@ static int clk_regmap_div_set_rate(struct clk_hw *hw, unsigned long rate,
const struct clk_ops clk_regmap_divider_ops = {
.recalc_rate = clk_regmap_div_recalc_rate,
- .round_rate = clk_regmap_div_round_rate,
+ .determine_rate = clk_regmap_div_determine_rate,
.set_rate = clk_regmap_div_set_rate,
};
EXPORT_SYMBOL_GPL(clk_regmap_divider_ops);
const struct clk_ops clk_regmap_divider_ro_ops = {
.recalc_rate = clk_regmap_div_recalc_rate,
- .round_rate = clk_regmap_div_round_rate,
+ .determine_rate = clk_regmap_div_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_regmap_divider_ro_ops);