gpiolib: introduce set_debounce method

A few architectures, like OMAP, allow you to set a debouncing time for the
gpio before generating the IRQ.  Teach gpiolib about that.

Mark said:
: This would be generally useful for embedded systems, especially where
: the interrupt concerned is a wake source.  It allows drivers to avoid
: spurious interrupts from noisy sources so if the hardware supports it
: the driver can avoid having to explicitly wait for the signal to become
: stable and software has to cope with fewer events.  We've lived without
: it for quite some time, though.

David said:
: I looked at adding debounce support to the generic GPIO calls (and thus
: gpiolib) some time back, but decided against it.  I forget why at this
: time (check list archives) but it wasn't because of lack of utility in
: certain contexts.
:
: One thing to watch out for is just how variable the hardware capabilities
: are.  Atmel GPIOs have something like a fixed number of 32K clock cycles
: for debounce, twl4030 had something odd, OMAPs were more like the Atmel
: chips but with a different clock.  In some cases debouncing had to be
: ganged, not per-GPIO.  And so forth.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: David Brownell <david-b@pacbell.net>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 43 insertions, 0 deletions

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 362a613d266e..3ca36542e338 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1447,6 +1447,49 @@ fail:
 }
 EXPORT_SYMBOL_GPL(gpio_direction_output);
 
+/**
+ * gpio_set_debounce - sets @debounce time for a @gpio
+ * @gpio: the gpio to set debounce time
+ * @debounce: debounce time is microseconds
+ */
+int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	unsigned long		flags;
+	struct gpio_chip	*chip;
+	struct gpio_desc	*desc = &gpio_desc[gpio];
+	int			status = -EINVAL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	if (!gpio_is_valid(gpio))
+		goto fail;
+	chip = desc->chip;
+	if (!chip || !chip->set || !chip->set_debounce)
+		goto fail;
+	gpio -= chip->base;
+	if (gpio >= chip->ngpio)
+		goto fail;
+	status = gpio_ensure_requested(desc, gpio);
+	if (status < 0)
+		goto fail;
+
+	/* now we know the gpio is valid and chip won't vanish */
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	might_sleep_if(extra_checks && chip->can_sleep);
+
+	return chip->set_debounce(chip, gpio, debounce);
+
+fail:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	if (status)
+		pr_debug("%s: gpio-%d status %d\n",
+			__func__, gpio, status);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpio_set_debounce);
 
 /* I/O calls are only valid after configuration completed; the relevant
  * "is this a valid GPIO" error checks should already have been done.