Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux

Merge drm updates from Dave Airlie: "This is the main drm pull request for 4.8. I'm down with a cold at the moment so hopefully this isn't in too bad a state, I finished pulling stuff last week mostly (nouveau fixes just went in today), so only this message should be influenced by illness. Apologies to anyone who's major feature I missed :-) Core: Lockless GEM BO freeing Non-blocking atomic work Documentation changes (rst/sphinx) Prep for new fencing changes Simple display helpers Master/auth changes Register/unregister rework Loads of trivial patches/fixes. New stuff: ARM Mali display driver (not the 3D chip) sii902x RGB->HDMI bridge Panel: Support for new panels Improved backlight support Bridge: Convert ADV7511 to bridge driver ADV7533 support TC358767 (DSI/DPI to eDP) encoder chip support i915: BXT support enabled by default GVT-g infrastructure GuC command submission and fixes BXT workarounds SKL/BKL workarounds Demidlayering device registration Thundering herd fixes Missing pci ids Atomic updates amdgpu/radeon: ATPX improvements for better dGPU power control on PX systems New power features for CZ/BR/ST Pipelined BO moves and evictions in TTM GPU scheduler improvements GPU reset improvements Overclocking on dGPUs with amdgpu Polaris powermanagement enabled nouveau: GK20A/GM20B volt and clock improvements. Initial support for GP100/GP104 GPUs, GP104 will not yet support acceleration due to NVIDIA having not released firmware for them as of yet. exynos: Exynos5433 SoC with IOMMU support. vc4: Shader validation for branching imx-drm: Atomic mode setting conversion Reworked DMFC FIFO allocation External bridge support analogix-dp: RK3399 eDP support Lots of fixes. rockchip: Lots of small fixes. msm: DT bindings cleanups Shrinker and madvise support ASoC HDMI codec support tegra: Host1x driver cleanups SOR reworking for DP support Runtime PM support omapdrm: PLL enhancements Header refactoring Gamma table support arcgpu: Simulator support virtio-gpu: Atomic modesetting fixes. rcar-du: Misc fixes. mediatek: MT8173 HDMI support sti: ASOC HDMI codec support Minor fixes fsl-dcu: Suspend/resume support Bridge support amdkfd: Minor fixes. etnaviv: Enable GPU clock gating hisilicon: Vblank and other fixes" * tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits) drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8 drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2016-08-02 03:44:08 +0200
committer: Linus Torvalds <torvalds@linux-foundation.org> 2016-08-02 03:44:08 +0200
commit: 731c7d3a205ba89b475b2aa71b5f13dd6ae3de56 (patch)
tree: d2b9c3e0a98b94dfc3e4e60e35622c0143ef4ed4 /drivers/gpu/drm/bridge
parent: clocksource/drivers/clps_711x: fixup for "ARM: clps711x: (diff)
parent: Merge branch 'linux-4.8' of git://github.com/skeggsb/linux into drm-next (diff)
download: linux-731c7d3a205ba89b475b2aa71b5f13dd6ae3de56.tar.xz
linux-731c7d3a205ba89b475b2aa71b5f13dd6ae3de56.zip
17 files changed, 3723 insertions, 66 deletions
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 8f7423f18da5..b590e678052d 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -50,6 +50,25 @@ config DRM_PARADE_PS8622
 	---help---
 	  Parade eDP-LVDS bridge chip driver.
 
+config DRM_SII902X
+	tristate "Silicon Image sii902x RGB/HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	---help---
+	  Silicon Image sii902x bridge chip driver.
+
+config DRM_TOSHIBA_TC358767
+	tristate "Toshiba TC358767 eDP bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	---help---
+	  Toshiba TC358767 eDP bridge chip driver.
+
 source "drivers/gpu/drm/bridge/analogix/Kconfig"
 
+source "drivers/gpu/drm/bridge/adv7511/Kconfig"
+
 endmenu
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 96b13b30e6ab..efdb07e878f5 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -5,4 +5,7 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
 obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
+obj-$(CONFIG_DRM_SII902X) += sii902x.o
+obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
new file mode 100644
index 000000000000..d2b0499ab7d7
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
@@ -0,0 +1,15 @@
+config DRM_I2C_ADV7511
+	tristate "AV7511 encoder"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+
+config DRM_I2C_ADV7533
+	bool "ADV7533 encoder"
+	depends on DRM_I2C_ADV7511
+	select DRM_MIPI_DSI
+	default y
+	help
+	  Support for the Analog Devices ADV7533 DSI to HDMI encoder.
diff --git a/drivers/gpu/drm/bridge/adv7511/Makefile b/drivers/gpu/drm/bridge/adv7511/Makefile
new file mode 100644
index 000000000000..9019327fff4c
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/Makefile
@@ -0,0 +1,3 @@
+adv7511-y := adv7511_drv.o
+adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
new file mode 100644
index 000000000000..161c923d6162
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -0,0 +1,392 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __DRM_I2C_ADV7511_H__
+#define __DRM_I2C_ADV7511_H__
+
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+
+#define ADV7511_REG_CHIP_REVISION		0x00
+#define ADV7511_REG_N0				0x01
+#define ADV7511_REG_N1				0x02
+#define ADV7511_REG_N2				0x03
+#define ADV7511_REG_SPDIF_FREQ			0x04
+#define ADV7511_REG_CTS_AUTOMATIC1		0x05
+#define ADV7511_REG_CTS_AUTOMATIC2		0x06
+#define ADV7511_REG_CTS_MANUAL0			0x07
+#define ADV7511_REG_CTS_MANUAL1			0x08
+#define ADV7511_REG_CTS_MANUAL2			0x09
+#define ADV7511_REG_AUDIO_SOURCE		0x0a
+#define ADV7511_REG_AUDIO_CONFIG		0x0b
+#define ADV7511_REG_I2S_CONFIG			0x0c
+#define ADV7511_REG_I2S_WIDTH			0x0d
+#define ADV7511_REG_AUDIO_SUB_SRC0		0x0e
+#define ADV7511_REG_AUDIO_SUB_SRC1		0x0f
+#define ADV7511_REG_AUDIO_SUB_SRC2		0x10
+#define ADV7511_REG_AUDIO_SUB_SRC3		0x11
+#define ADV7511_REG_AUDIO_CFG1			0x12
+#define ADV7511_REG_AUDIO_CFG2			0x13
+#define ADV7511_REG_AUDIO_CFG3			0x14
+#define ADV7511_REG_I2C_FREQ_ID_CFG		0x15
+#define ADV7511_REG_VIDEO_INPUT_CFG1		0x16
+#define ADV7511_REG_CSC_UPPER(x)		(0x18 + (x) * 2)
+#define ADV7511_REG_CSC_LOWER(x)		(0x19 + (x) * 2)
+#define ADV7511_REG_SYNC_DECODER(x)		(0x30 + (x))
+#define ADV7511_REG_DE_GENERATOR		(0x35 + (x))
+#define ADV7511_REG_PIXEL_REPETITION		0x3b
+#define ADV7511_REG_VIC_MANUAL			0x3c
+#define ADV7511_REG_VIC_SEND			0x3d
+#define ADV7511_REG_VIC_DETECTED		0x3e
+#define ADV7511_REG_AUX_VIC_DETECTED		0x3f
+#define ADV7511_REG_PACKET_ENABLE0		0x40
+#define ADV7511_REG_POWER			0x41
+#define ADV7511_REG_STATUS			0x42
+#define ADV7511_REG_EDID_I2C_ADDR		0x43
+#define ADV7511_REG_PACKET_ENABLE1		0x44
+#define ADV7511_REG_PACKET_I2C_ADDR		0x45
+#define ADV7511_REG_DSD_ENABLE			0x46
+#define ADV7511_REG_VIDEO_INPUT_CFG2		0x48
+#define ADV7511_REG_INFOFRAME_UPDATE		0x4a
+#define ADV7511_REG_GC(x)			(0x4b + (x)) /* 0x4b - 0x51 */
+#define ADV7511_REG_AVI_INFOFRAME_VERSION	0x52
+#define ADV7511_REG_AVI_INFOFRAME_LENGTH	0x53
+#define ADV7511_REG_AVI_INFOFRAME_CHECKSUM	0x54
+#define ADV7511_REG_AVI_INFOFRAME(x)		(0x55 + (x)) /* 0x55 - 0x6f */
+#define ADV7511_REG_AUDIO_INFOFRAME_VERSION	0x70
+#define ADV7511_REG_AUDIO_INFOFRAME_LENGTH	0x71
+#define ADV7511_REG_AUDIO_INFOFRAME_CHECKSUM	0x72
+#define ADV7511_REG_AUDIO_INFOFRAME(x)		(0x73 + (x)) /* 0x73 - 0x7c */
+#define ADV7511_REG_INT_ENABLE(x)		(0x94 + (x))
+#define ADV7511_REG_INT(x)			(0x96 + (x))
+#define ADV7511_REG_INPUT_CLK_DIV		0x9d
+#define ADV7511_REG_PLL_STATUS			0x9e
+#define ADV7511_REG_HDMI_POWER			0xa1
+#define ADV7511_REG_HDCP_HDMI_CFG		0xaf
+#define ADV7511_REG_AN(x)			(0xb0 + (x)) /* 0xb0 - 0xb7 */
+#define ADV7511_REG_HDCP_STATUS			0xb8
+#define ADV7511_REG_BCAPS			0xbe
+#define ADV7511_REG_BKSV(x)			(0xc0 + (x)) /* 0xc0 - 0xc3 */
+#define ADV7511_REG_EDID_SEGMENT		0xc4
+#define ADV7511_REG_DDC_STATUS			0xc8
+#define ADV7511_REG_EDID_READ_CTRL		0xc9
+#define ADV7511_REG_BSTATUS(x)			(0xca + (x)) /* 0xca - 0xcb */
+#define ADV7511_REG_TIMING_GEN_SEQ		0xd0
+#define ADV7511_REG_POWER2			0xd6
+#define ADV7511_REG_HSYNC_PLACEMENT_MSB		0xfa
+
+#define ADV7511_REG_SYNC_ADJUSTMENT(x)		(0xd7 + (x)) /* 0xd7 - 0xdc */
+#define ADV7511_REG_TMDS_CLOCK_INV		0xde
+#define ADV7511_REG_ARC_CTRL			0xdf
+#define ADV7511_REG_CEC_I2C_ADDR		0xe1
+#define ADV7511_REG_CEC_CTRL			0xe2
+#define ADV7511_REG_CHIP_ID_HIGH		0xf5
+#define ADV7511_REG_CHIP_ID_LOW			0xf6
+
+#define ADV7511_CSC_ENABLE			BIT(7)
+#define ADV7511_CSC_UPDATE_MODE			BIT(5)
+
+#define ADV7511_INT0_HPD			BIT(7)
+#define ADV7511_INT0_VSYNC			BIT(5)
+#define ADV7511_INT0_AUDIO_FIFO_FULL		BIT(4)
+#define ADV7511_INT0_EDID_READY			BIT(2)
+#define ADV7511_INT0_HDCP_AUTHENTICATED		BIT(1)
+
+#define ADV7511_INT1_DDC_ERROR			BIT(7)
+#define ADV7511_INT1_BKSV			BIT(6)
+#define ADV7511_INT1_CEC_TX_READY		BIT(5)
+#define ADV7511_INT1_CEC_TX_ARBIT_LOST		BIT(4)
+#define ADV7511_INT1_CEC_TX_RETRY_TIMEOUT	BIT(3)
+#define ADV7511_INT1_CEC_RX_READY3		BIT(2)
+#define ADV7511_INT1_CEC_RX_READY2		BIT(1)
+#define ADV7511_INT1_CEC_RX_READY1		BIT(0)
+
+#define ADV7511_ARC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_CEC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_POWER_POWER_DOWN		BIT(6)
+
+#define ADV7511_HDMI_CFG_MODE_MASK		0x2
+#define ADV7511_HDMI_CFG_MODE_DVI		0x0
+#define ADV7511_HDMI_CFG_MODE_HDMI		0x2
+
+#define ADV7511_AUDIO_SELECT_I2C		0x0
+#define ADV7511_AUDIO_SELECT_SPDIF		0x1
+#define ADV7511_AUDIO_SELECT_DSD		0x2
+#define ADV7511_AUDIO_SELECT_HBR		0x3
+#define ADV7511_AUDIO_SELECT_DST		0x4
+
+#define ADV7511_I2S_SAMPLE_LEN_16		0x2
+#define ADV7511_I2S_SAMPLE_LEN_20		0x3
+#define ADV7511_I2S_SAMPLE_LEN_18		0x4
+#define ADV7511_I2S_SAMPLE_LEN_22		0x5
+#define ADV7511_I2S_SAMPLE_LEN_19		0x8
+#define ADV7511_I2S_SAMPLE_LEN_23		0x9
+#define ADV7511_I2S_SAMPLE_LEN_24		0xb
+#define ADV7511_I2S_SAMPLE_LEN_17		0xc
+#define ADV7511_I2S_SAMPLE_LEN_21		0xd
+
+#define ADV7511_SAMPLE_FREQ_44100		0x0
+#define ADV7511_SAMPLE_FREQ_48000		0x2
+#define ADV7511_SAMPLE_FREQ_32000		0x3
+#define ADV7511_SAMPLE_FREQ_88200		0x8
+#define ADV7511_SAMPLE_FREQ_96000		0xa
+#define ADV7511_SAMPLE_FREQ_176400		0xc
+#define ADV7511_SAMPLE_FREQ_192000		0xe
+
+#define ADV7511_STATUS_POWER_DOWN_POLARITY	BIT(7)
+#define ADV7511_STATUS_HPD			BIT(6)
+#define ADV7511_STATUS_MONITOR_SENSE		BIT(5)
+#define ADV7511_STATUS_I2S_32BIT_MODE		BIT(3)
+
+#define ADV7511_PACKET_ENABLE_N_CTS		BIT(8+6)
+#define ADV7511_PACKET_ENABLE_AUDIO_SAMPLE	BIT(8+5)
+#define ADV7511_PACKET_ENABLE_AVI_INFOFRAME	BIT(8+4)
+#define ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME	BIT(8+3)
+#define ADV7511_PACKET_ENABLE_GC		BIT(7)
+#define ADV7511_PACKET_ENABLE_SPD		BIT(6)
+#define ADV7511_PACKET_ENABLE_MPEG		BIT(5)
+#define ADV7511_PACKET_ENABLE_ACP		BIT(4)
+#define ADV7511_PACKET_ENABLE_ISRC		BIT(3)
+#define ADV7511_PACKET_ENABLE_GM		BIT(2)
+#define ADV7511_PACKET_ENABLE_SPARE2		BIT(1)
+#define ADV7511_PACKET_ENABLE_SPARE1		BIT(0)
+
+#define ADV7511_REG_POWER2_HPD_SRC_MASK		0xc0
+#define ADV7511_REG_POWER2_HPD_SRC_BOTH		0x00
+#define ADV7511_REG_POWER2_HPD_SRC_HPD		0x40
+#define ADV7511_REG_POWER2_HPD_SRC_CEC		0x80
+#define ADV7511_REG_POWER2_HPD_SRC_NONE		0xc0
+#define ADV7511_REG_POWER2_TDMS_ENABLE		BIT(4)
+#define ADV7511_REG_POWER2_GATE_INPUT_CLK	BIT(0)
+
+#define ADV7511_LOW_REFRESH_RATE_NONE		0x0
+#define ADV7511_LOW_REFRESH_RATE_24HZ		0x1
+#define ADV7511_LOW_REFRESH_RATE_25HZ		0x2
+#define ADV7511_LOW_REFRESH_RATE_30HZ		0x3
+
+#define ADV7511_AUDIO_CFG3_LEN_MASK		0x0f
+#define ADV7511_I2C_FREQ_ID_CFG_RATE_MASK	0xf0
+
+#define ADV7511_AUDIO_SOURCE_I2S		0
+#define ADV7511_AUDIO_SOURCE_SPDIF		1
+
+#define ADV7511_I2S_FORMAT_I2S			0
+#define ADV7511_I2S_FORMAT_RIGHT_J		1
+#define ADV7511_I2S_FORMAT_LEFT_J		2
+
+#define ADV7511_PACKET(p, x)	    ((p) * 0x20 + (x))
+#define ADV7511_PACKET_SDP(x)	    ADV7511_PACKET(0, x)
+#define ADV7511_PACKET_MPEG(x)	    ADV7511_PACKET(1, x)
+#define ADV7511_PACKET_ACP(x)	    ADV7511_PACKET(2, x)
+#define ADV7511_PACKET_ISRC1(x)	    ADV7511_PACKET(3, x)
+#define ADV7511_PACKET_ISRC2(x)	    ADV7511_PACKET(4, x)
+#define ADV7511_PACKET_GM(x)	    ADV7511_PACKET(5, x)
+#define ADV7511_PACKET_SPARE(x)	    ADV7511_PACKET(6, x)
+
+enum adv7511_input_clock {
+	ADV7511_INPUT_CLOCK_1X,
+	ADV7511_INPUT_CLOCK_2X,
+	ADV7511_INPUT_CLOCK_DDR,
+};
+
+enum adv7511_input_justification {
+	ADV7511_INPUT_JUSTIFICATION_EVENLY = 0,
+	ADV7511_INPUT_JUSTIFICATION_RIGHT = 1,
+	ADV7511_INPUT_JUSTIFICATION_LEFT = 2,
+};
+
+enum adv7511_input_sync_pulse {
+	ADV7511_INPUT_SYNC_PULSE_DE = 0,
+	ADV7511_INPUT_SYNC_PULSE_HSYNC = 1,
+	ADV7511_INPUT_SYNC_PULSE_VSYNC = 2,
+	ADV7511_INPUT_SYNC_PULSE_NONE = 3,
+};
+
+/**
+ * enum adv7511_sync_polarity - Polarity for the input sync signals
+ * @ADV7511_SYNC_POLARITY_PASSTHROUGH:  Sync polarity matches that of
+ *				       the currently configured mode.
+ * @ADV7511_SYNC_POLARITY_LOW:	    Sync polarity is low
+ * @ADV7511_SYNC_POLARITY_HIGH:	    Sync polarity is high
+ *
+ * If the polarity is set to either LOW or HIGH the driver will configure the
+ * ADV7511 to internally invert the sync signal if required to match the sync
+ * polarity setting for the currently selected output mode.
+ *
+ * If the polarity is set to PASSTHROUGH, the ADV7511 will route the signal
+ * unchanged. This is used when the upstream graphics core already generates
+ * the sync signals with the correct polarity.
+ */
+enum adv7511_sync_polarity {
+	ADV7511_SYNC_POLARITY_PASSTHROUGH,
+	ADV7511_SYNC_POLARITY_LOW,
+	ADV7511_SYNC_POLARITY_HIGH,
+};
+
+/**
+ * struct adv7511_link_config - Describes adv7511 hardware configuration
+ * @input_color_depth:		Number of bits per color component (8, 10 or 12)
+ * @input_colorspace:		The input colorspace (RGB, YUV444, YUV422)
+ * @input_clock:		The input video clock style (1x, 2x, DDR)
+ * @input_style:		The input component arrangement variant
+ * @input_justification:	Video input format bit justification
+ * @clock_delay:		Clock delay for the input clock (in ps)
+ * @embedded_sync:		Video input uses BT.656-style embedded sync
+ * @sync_pulse:			Select the sync pulse
+ * @vsync_polarity:		vsync input signal configuration
+ * @hsync_polarity:		hsync input signal configuration
+ */
+struct adv7511_link_config {
+	unsigned int input_color_depth;
+	enum hdmi_colorspace input_colorspace;
+	enum adv7511_input_clock input_clock;
+	unsigned int input_style;
+	enum adv7511_input_justification input_justification;
+
+	int clock_delay;
+
+	bool embedded_sync;
+	enum adv7511_input_sync_pulse sync_pulse;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+};
+
+/**
+ * enum adv7511_csc_scaling - Scaling factor for the ADV7511 CSC
+ * @ADV7511_CSC_SCALING_1: CSC results are not scaled
+ * @ADV7511_CSC_SCALING_2: CSC results are scaled by a factor of two
+ * @ADV7511_CSC_SCALING_4: CSC results are scalled by a factor of four
+ */
+enum adv7511_csc_scaling {
+	ADV7511_CSC_SCALING_1 = 0,
+	ADV7511_CSC_SCALING_2 = 1,
+	ADV7511_CSC_SCALING_4 = 2,
+};
+
+/**
+ * struct adv7511_video_config - Describes adv7511 hardware configuration
+ * @csc_enable:			Whether to enable color space conversion
+ * @csc_scaling_factor:		Color space conversion scaling factor
+ * @csc_coefficents:		Color space conversion coefficents
+ * @hdmi_mode:			Whether to use HDMI or DVI output mode
+ * @avi_infoframe:		HDMI infoframe
+ */
+struct adv7511_video_config {
+	bool csc_enable;
+	enum adv7511_csc_scaling csc_scaling_factor;
+	const uint16_t *csc_coefficents;
+
+	bool hdmi_mode;
+	struct hdmi_avi_infoframe avi_infoframe;
+};
+
+enum adv7511_type {
+	ADV7511,
+	ADV7533,
+};
+
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+	struct i2c_client *i2c_cec;
+
+	struct regmap *regmap;
+	struct regmap *regmap_cec;
+	enum drm_connector_status status;
+	bool powered;
+
+	struct drm_display_mode curr_mode;
+
+	unsigned int f_tmds;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+	bool edid_read;
+
+	wait_queue_head_t wq;
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct edid *edid;
+
+	struct gpio_desc *gpio_pd;
+
+	/* ADV7533 DSI RX related params */
+	struct device_node *host_node;
+	struct mipi_dsi_device *dsi;
+	u8 num_dsi_lanes;
+	bool use_timing_gen;
+
+	enum adv7511_type type;
+};
+
+#ifdef CONFIG_DRM_I2C_ADV7533
+void adv7533_dsi_power_on(struct adv7511 *adv);
+void adv7533_dsi_power_off(struct adv7511 *adv);
+void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode);
+int adv7533_patch_registers(struct adv7511 *adv);
+void adv7533_uninit_cec(struct adv7511 *adv);
+int adv7533_init_cec(struct adv7511 *adv);
+int adv7533_attach_dsi(struct adv7511 *adv);
+void adv7533_detach_dsi(struct adv7511 *adv);
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
+#else
+static inline void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+}
+
+static inline void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+}
+
+static inline void adv7533_mode_set(struct adv7511 *adv,
+				    struct drm_display_mode *mode)
+{
+}
+
+static inline int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline void adv7533_uninit_cec(struct adv7511 *adv)
+{
+}
+
+static inline int adv7533_init_cec(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline int adv7533_attach_dsi(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline void adv7533_detach_dsi(struct adv7511 *adv)
+{
+}
+
+static inline int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __DRM_I2C_ADV7511_H__ */
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
new file mode 100644
index 000000000000..ec8fb2ed3275
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -0,0 +1,1124 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+
+#include "adv7511.h"
+
+/* ADI recommended values for proper operation. */
+static const struct reg_sequence adv7511_fixed_registers[] = {
+	{ 0x98, 0x03 },
+	{ 0x9a, 0xe0 },
+	{ 0x9c, 0x30 },
+	{ 0x9d, 0x61 },
+	{ 0xa2, 0xa4 },
+	{ 0xa3, 0xa4 },
+	{ 0xe0, 0xd0 },
+	{ 0xf9, 0x00 },
+	{ 0x55, 0x02 },
+};
+
+/* -----------------------------------------------------------------------------
+ * Register access
+ */
+
+static const uint8_t adv7511_register_defaults[] = {
+	0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
+	0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
+	0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
+	0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
+	0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
+	0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
+	0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
+	0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
+	0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
+	0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
+	0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
+	0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
+	0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
+	0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
+	0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ADV7511_REG_CHIP_REVISION:
+	case ADV7511_REG_SPDIF_FREQ:
+	case ADV7511_REG_CTS_AUTOMATIC1:
+	case ADV7511_REG_CTS_AUTOMATIC2:
+	case ADV7511_REG_VIC_DETECTED:
+	case ADV7511_REG_VIC_SEND:
+	case ADV7511_REG_AUX_VIC_DETECTED:
+	case ADV7511_REG_STATUS:
+	case ADV7511_REG_GC(1):
+	case ADV7511_REG_INT(0):
+	case ADV7511_REG_INT(1):
+	case ADV7511_REG_PLL_STATUS:
+	case ADV7511_REG_AN(0):
+	case ADV7511_REG_AN(1):
+	case ADV7511_REG_AN(2):
+	case ADV7511_REG_AN(3):
+	case ADV7511_REG_AN(4):
+	case ADV7511_REG_AN(5):
+	case ADV7511_REG_AN(6):
+	case ADV7511_REG_AN(7):
+	case ADV7511_REG_HDCP_STATUS:
+	case ADV7511_REG_BCAPS:
+	case ADV7511_REG_BKSV(0):
+	case ADV7511_REG_BKSV(1):
+	case ADV7511_REG_BKSV(2):
+	case ADV7511_REG_BKSV(3):
+	case ADV7511_REG_BKSV(4):
+	case ADV7511_REG_DDC_STATUS:
+	case ADV7511_REG_EDID_READ_CTRL:
+	case ADV7511_REG_BSTATUS(0):
+	case ADV7511_REG_BSTATUS(1):
+	case ADV7511_REG_CHIP_ID_HIGH:
+	case ADV7511_REG_CHIP_ID_LOW:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config adv7511_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults_raw = adv7511_register_defaults,
+	.num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
+
+	.volatile_reg = adv7511_register_volatile,
+};
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
+				 const uint16_t *coeff,
+				 unsigned int scaling_factor)
+{
+	unsigned int i;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
+
+	if (enable) {
+		for (i = 0; i < 12; ++i) {
+			regmap_update_bits(adv7511->regmap,
+					   ADV7511_REG_CSC_UPPER(i),
+					   0x1f, coeff[i] >> 8);
+			regmap_write(adv7511->regmap,
+				     ADV7511_REG_CSC_LOWER(i),
+				     coeff[i] & 0xff);
+		}
+	}
+
+	if (enable)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0xe0, 0x80 | (scaling_factor << 5));
+	else
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0x80, 0x00);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, 0);
+}
+
+static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0xff);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0xff);
+	}
+
+	return 0;
+}
+
+static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0x00);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0x00);
+	}
+
+	return 0;
+}
+
+/* Coefficients for adv7511 color space conversion */
+static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
+	0x0734, 0x04ad, 0x0000, 0x1c1b,
+	0x1ddc, 0x04ad, 0x1f24, 0x0135,
+	0x0000, 0x04ad, 0x087c, 0x1b77,
+};
+
+static void adv7511_set_config_csc(struct adv7511 *adv7511,
+				   struct drm_connector *connector,
+				   bool rgb)
+{
+	struct adv7511_video_config config;
+	bool output_format_422, output_format_ycbcr;
+	unsigned int mode;
+	uint8_t infoframe[17];
+
+	if (adv7511->edid)
+		config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
+	else
+		config.hdmi_mode = false;
+
+	hdmi_avi_infoframe_init(&config.avi_infoframe);
+
+	config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
+
+	if (rgb) {
+		config.csc_enable = false;
+		config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+	} else {
+		config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
+		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
+
+		if ((connector->display_info.color_formats &
+		     DRM_COLOR_FORMAT_YCRCB422) &&
+		    config.hdmi_mode) {
+			config.csc_enable = false;
+			config.avi_infoframe.colorspace =
+				HDMI_COLORSPACE_YUV422;
+		} else {
+			config.csc_enable = true;
+			config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+		}
+	}
+
+	if (config.hdmi_mode) {
+		mode = ADV7511_HDMI_CFG_MODE_HDMI;
+
+		switch (config.avi_infoframe.colorspace) {
+		case HDMI_COLORSPACE_YUV444:
+			output_format_422 = false;
+			output_format_ycbcr = true;
+			break;
+		case HDMI_COLORSPACE_YUV422:
+			output_format_422 = true;
+			output_format_ycbcr = true;
+			break;
+		default:
+			output_format_422 = false;
+			output_format_ycbcr = false;
+			break;
+		}
+	} else {
+		mode = ADV7511_HDMI_CFG_MODE_DVI;
+		output_format_422 = false;
+		output_format_ycbcr = false;
+	}
+
+	adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+
+	adv7511_set_colormap(adv7511, config.csc_enable,
+			     config.csc_coefficents,
+			     config.csc_scaling_factor);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
+			   (output_format_422 << 7) | output_format_ycbcr);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+			   ADV7511_HDMI_CFG_MODE_MASK, mode);
+
+	hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
+				sizeof(infoframe));
+
+	/* The AVI infoframe id is not configurable */
+	regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
+			  infoframe + 1, sizeof(infoframe) - 1);
+
+	adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+}
+
+static void adv7511_set_link_config(struct adv7511 *adv7511,
+				    const struct adv7511_link_config *config)
+{
+	/*
+	 * The input style values documented in the datasheet don't match the
+	 * hardware register field values :-(
+	 */
+	static const unsigned int input_styles[4] = { 0, 2, 1, 3 };
+
+	unsigned int clock_delay;
+	unsigned int color_depth;
+	unsigned int input_id;
+
+	clock_delay = (config->clock_delay + 1200) / 400;
+	color_depth = config->input_color_depth == 8 ? 3
+		    : (config->input_color_depth == 10 ? 1 : 2);
+
+	/* TODO Support input ID 6 */
+	if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
+		input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
+			 ? 5 : 0;
+	else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
+		input_id = config->embedded_sync ? 8 : 7;
+	else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
+		input_id = config->embedded_sync ? 4 : 3;
+	else
+		input_id = config->embedded_sync ? 2 : 1;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
+			   input_id);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
+			   (color_depth << 4) |
+			   (input_styles[config->input_style] << 2));
+	regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
+		     config->input_justification << 3);
+	regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
+		     config->sync_pulse << 2);
+
+	regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
+
+	adv7511->embedded_sync = config->embedded_sync;
+	adv7511->hsync_polarity = config->hsync_polarity;
+	adv7511->vsync_polarity = config->vsync_polarity;
+	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
+}
+
+static void adv7511_power_on(struct adv7511 *adv7511)
+{
+	adv7511->current_edid_segment = -1;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN, 0);
+	if (adv7511->i2c_main->irq) {
+		/*
+		 * Documentation says the INT_ENABLE registers are reset in
+		 * POWER_DOWN mode. My 7511w preserved the bits, however.
+		 * Still, let's be safe and stick to the documentation.
+		 */
+		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+			     ADV7511_INT0_EDID_READY);
+		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
+			     ADV7511_INT1_DDC_ERROR);
+	}
+
+	/*
+	 * Per spec it is allowed to pulse the HPD signal to indicate that the
+	 * EDID information has changed. Some monitors do this when they wakeup
+	 * from standby or are enabled. When the HPD goes low the adv7511 is
+	 * reset and the outputs are disabled which might cause the monitor to
+	 * go to standby again. To avoid this we ignore the HPD pin for the
+	 * first few seconds after enabling the output.
+	 */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+			   ADV7511_REG_POWER2_HPD_SRC_MASK,
+			   ADV7511_REG_POWER2_HPD_SRC_NONE);
+
+	/*
+	 * Most of the registers are reset during power down or when HPD is low.
+	 */
+	regcache_sync(adv7511->regmap);
+
+	if (adv7511->type == ADV7533)
+		adv7533_dsi_power_on(adv7511);
+
+	adv7511->powered = true;
+}
+
+static void adv7511_power_off(struct adv7511 *adv7511)
+{
+	/* TODO: setup additional power down modes */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN,
+			   ADV7511_POWER_POWER_DOWN);
+	regcache_mark_dirty(adv7511->regmap);
+
+	if (adv7511->type == ADV7533)
+		adv7533_dsi_power_off(adv7511);
+
+	adv7511->powered = false;
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt and hotplug detection
+ */
+
+static bool adv7511_hpd(struct adv7511 *adv7511)
+{
+	unsigned int irq0;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return false;
+
+	if (irq0 & ADV7511_INT0_HPD) {
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_HPD);
+		return true;
+	}
+
+	return false;
+}
+
+static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
+{
+	unsigned int irq0, irq1;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
+	if (ret < 0)
+		return ret;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
+
+	if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
+		drm_helper_hpd_irq_event(adv7511->connector.dev);
+
+	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
+		adv7511->edid_read = true;
+
+		if (adv7511->i2c_main->irq)
+			wake_up_all(&adv7511->wq);
+	}
+
+	return 0;
+}
+
+static irqreturn_t adv7511_irq_handler(int irq, void *devid)
+{
+	struct adv7511 *adv7511 = devid;
+	int ret;
+
+	ret = adv7511_irq_process(adv7511, true);
+	return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
+}
+
+/* -----------------------------------------------------------------------------
+ * EDID retrieval
+ */
+
+static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
+{
+	int ret;
+
+	if (adv7511->i2c_main->irq) {
+		ret = wait_event_interruptible_timeout(adv7511->wq,
+				adv7511->edid_read, msecs_to_jiffies(timeout));
+	} else {
+		for (; timeout > 0; timeout -= 25) {
+			ret = adv7511_irq_process(adv7511, false);
+			if (ret < 0)
+				break;
+
+			if (adv7511->edid_read)
+				break;
+
+			msleep(25);
+		}
+	}
+
+	return adv7511->edid_read ? 0 : -EIO;
+}
+
+static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
+				  size_t len)
+{
+	struct adv7511 *adv7511 = data;
+	struct i2c_msg xfer[2];
+	uint8_t offset;
+	unsigned int i;
+	int ret;
+
+	if (len > 128)
+		return -EINVAL;
+
+	if (adv7511->current_edid_segment != block / 2) {
+		unsigned int status;
+
+		ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
+				  &status);
+		if (ret < 0)
+			return ret;
+
+		if (status != 2) {
+			adv7511->edid_read = false;
+			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
+				     block);
+			ret = adv7511_wait_for_edid(adv7511, 200);
+			if (ret < 0)
+				return ret;
+		}
+
+		/* Break this apart, hopefully more I2C controllers will
+		 * support 64 byte transfers than 256 byte transfers
+		 */
+
+		xfer[0].addr = adv7511->i2c_edid->addr;
+		xfer[0].flags = 0;
+		xfer[0].len = 1;
+		xfer[0].buf = &offset;
+		xfer[1].addr = adv7511->i2c_edid->addr;
+		xfer[1].flags = I2C_M_RD;
+		xfer[1].len = 64;
+		xfer[1].buf = adv7511->edid_buf;
+
+		offset = 0;
+
+		for (i = 0; i < 4; ++i) {
+			ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
+					   ARRAY_SIZE(xfer));
+			if (ret < 0)
+				return ret;
+			else if (ret != 2)
+				return -EIO;
+
+			xfer[1].buf += 64;
+			offset += 64;
+		}
+
+		adv7511->current_edid_segment = block / 2;
+	}
+
+	if (block % 2 == 0)
+		memcpy(buf, adv7511->edid_buf, len);
+	else
+		memcpy(buf, adv7511->edid_buf + 128, len);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * ADV75xx helpers
+ */
+
+static int adv7511_get_modes(struct adv7511 *adv7511,
+			     struct drm_connector *connector)
+{
+	struct edid *edid;
+	unsigned int count;
+
+	/* Reading the EDID only works if the device is powered */
+	if (!adv7511->powered) {
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN, 0);
+		if (adv7511->i2c_main->irq) {
+			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+				     ADV7511_INT0_EDID_READY);
+			regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
+				     ADV7511_INT1_DDC_ERROR);
+		}
+		adv7511->current_edid_segment = -1;
+	}
+
+	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
+
+	if (!adv7511->powered)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN,
+				   ADV7511_POWER_POWER_DOWN);
+
+	kfree(adv7511->edid);
+	adv7511->edid = edid;
+	if (!edid)
+		return 0;
+
+	drm_mode_connector_update_edid_property(connector, edid);
+	count = drm_add_edid_modes(connector, edid);
+
+	adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
+
+	return count;
+}
+
+static enum drm_connector_status
+adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
+{
+	enum drm_connector_status status;
+	unsigned int val;
+	bool hpd;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
+	if (ret < 0)
+		return connector_status_disconnected;
+
+	if (val & ADV7511_STATUS_HPD)
+		status = connector_status_connected;
+	else
+		status = connector_status_disconnected;
+
+	hpd = adv7511_hpd(adv7511);
+
+	/* The chip resets itself when the cable is disconnected, so in case
+	 * there is a pending HPD interrupt and the cable is connected there was
+	 * at least one transition from disconnected to connected and the chip
+	 * has to be reinitialized. */
+	if (status == connector_status_connected && hpd && adv7511->powered) {
+		regcache_mark_dirty(adv7511->regmap);
+		adv7511_power_on(adv7511);
+		adv7511_get_modes(adv7511, connector);
+		if (adv7511->status == connector_status_connected)
+			status = connector_status_disconnected;
+	} else {
+		/* Renable HPD sensing */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+				   ADV7511_REG_POWER2_HPD_SRC_MASK,
+				   ADV7511_REG_POWER2_HPD_SRC_BOTH);
+	}
+
+	adv7511->status = status;
+	return status;
+}
+
+static int adv7511_mode_valid(struct adv7511 *adv7511,
+			      struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void adv7511_mode_set(struct adv7511 *adv7511,
+			     struct drm_display_mode *mode,
+			     struct drm_display_mode *adj_mode)
+{
+	unsigned int low_refresh_rate;
+	unsigned int hsync_polarity = 0;
+	unsigned int vsync_polarity = 0;
+
+	if (adv7511->embedded_sync) {
+		unsigned int hsync_offset, hsync_len;
+		unsigned int vsync_offset, vsync_len;
+
+		hsync_offset = adj_mode->crtc_hsync_start -
+			       adj_mode->crtc_hdisplay;
+		vsync_offset = adj_mode->crtc_vsync_start -
+			       adj_mode->crtc_vdisplay;
+		hsync_len = adj_mode->crtc_hsync_end -
+			    adj_mode->crtc_hsync_start;
+		vsync_len = adj_mode->crtc_vsync_end -
+			    adj_mode->crtc_vsync_start;
+
+		/* The hardware vsync generator has a off-by-one bug */
+		vsync_offset += 1;
+
+		regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
+			     ((hsync_offset >> 10) & 0x7) << 5);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
+			     (hsync_offset >> 2) & 0xff);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
+			     ((hsync_offset & 0x3) << 6) |
+			     ((hsync_len >> 4) & 0x3f));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
+			     ((hsync_len & 0xf) << 4) |
+			     ((vsync_offset >> 6) & 0xf));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
+			     ((vsync_offset & 0x3f) << 2) |
+			     ((vsync_len >> 8) & 0x3));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
+			     vsync_len & 0xff);
+
+		hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
+		vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
+	} else {
+		enum adv7511_sync_polarity mode_hsync_polarity;
+		enum adv7511_sync_polarity mode_vsync_polarity;
+
+		/**
+		 * If the input signal is always low or always high we want to
+		 * invert or let it passthrough depending on the polarity of the
+		 * current mode.
+		 **/
+		if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adv7511->hsync_polarity != mode_hsync_polarity &&
+		    adv7511->hsync_polarity !=
+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			hsync_polarity = 1;
+
+		if (adv7511->vsync_polarity != mode_vsync_polarity &&
+		    adv7511->vsync_polarity !=
+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			vsync_polarity = 1;
+	}
+
+	if (mode->vrefresh <= 24000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
+	else if (mode->vrefresh <= 25000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
+	else if (mode->vrefresh <= 30000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
+	else
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
+
+	regmap_update_bits(adv7511->regmap, 0xfb,
+		0x6, low_refresh_rate << 1);
+	regmap_update_bits(adv7511->regmap, 0x17,
+		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
+
+	if (adv7511->type == ADV7533)
+		adv7533_mode_set(adv7511, adj_mode);
+
+	drm_mode_copy(&adv7511->curr_mode, adj_mode);
+
+	/*
+	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
+	 * supposed to give better results.
+	 */
+
+	adv7511->f_tmds = mode->clock;
+}
+
+/* Connector funcs */
+static struct adv7511 *connector_to_adv7511(struct drm_connector *connector)
+{
+	return container_of(connector, struct adv7511, connector);
+}
+
+static int adv7511_connector_get_modes(struct drm_connector *connector)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_get_modes(adv, connector);
+}
+
+static enum drm_mode_status
+adv7511_connector_mode_valid(struct drm_connector *connector,
+			     struct drm_display_mode *mode)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_mode_valid(adv, mode);
+}
+
+static struct drm_connector_helper_funcs adv7511_connector_helper_funcs = {
+	.get_modes = adv7511_connector_get_modes,
+	.mode_valid = adv7511_connector_mode_valid,
+};
+
+static enum drm_connector_status
+adv7511_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_detect(adv, connector);
+}
+
+static struct drm_connector_funcs adv7511_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = adv7511_connector_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+/* Bridge funcs */
+static struct adv7511 *bridge_to_adv7511(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct adv7511, bridge);
+}
+
+static void adv7511_bridge_enable(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_power_on(adv);
+}
+
+static void adv7511_bridge_disable(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_power_off(adv);
+}
+
+static void adv7511_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adj_mode)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_mode_set(adv, mode, adj_mode);
+}
+
+static int adv7511_bridge_attach(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+	int ret;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	adv->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	ret = drm_connector_init(bridge->dev, &adv->connector,
+				 &adv7511_connector_funcs,
+				 DRM_MODE_CONNECTOR_HDMIA);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector with drm\n");
+		return ret;
+	}
+	drm_connector_helper_add(&adv->connector,
+				 &adv7511_connector_helper_funcs);
+	drm_mode_connector_attach_encoder(&adv->connector, bridge->encoder);
+
+	if (adv->type == ADV7533)
+		ret = adv7533_attach_dsi(adv);
+
+	return ret;
+}
+
+static struct drm_bridge_funcs adv7511_bridge_funcs = {
+	.enable = adv7511_bridge_enable,
+	.disable = adv7511_bridge_disable,
+	.mode_set = adv7511_bridge_mode_set,
+	.attach = adv7511_bridge_attach,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & remove
+ */
+
+static int adv7511_parse_dt(struct device_node *np,
+			    struct adv7511_link_config *config)
+{
+	const char *str;
+	int ret;
+
+	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
+	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
+	    config->input_color_depth != 12)
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-colorspace", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "rgb"))
+		config->input_colorspace = HDMI_COLORSPACE_RGB;
+	else if (!strcmp(str, "yuv422"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV422;
+	else if (!strcmp(str, "yuv444"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV444;
+	else
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-clock", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "1x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_1X;
+	else if (!strcmp(str, "2x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_2X;
+	else if (!strcmp(str, "ddr"))
+		config->input_clock = ADV7511_INPUT_CLOCK_DDR;
+	else
+		return -EINVAL;
+
+	if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
+	    config->input_clock != ADV7511_INPUT_CLOCK_1X) {
+		ret = of_property_read_u32(np, "adi,input-style",
+					   &config->input_style);
+		if (ret)
+			return ret;
+
+		if (config->input_style < 1 || config->input_style > 3)
+			return -EINVAL;
+
+		ret = of_property_read_string(np, "adi,input-justification",
+					      &str);
+		if (ret < 0)
+			return ret;
+
+		if (!strcmp(str, "left"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_LEFT;
+		else if (!strcmp(str, "evenly"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_EVENLY;
+		else if (!strcmp(str, "right"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_RIGHT;
+		else
+			return -EINVAL;
+
+	} else {
+		config->input_style = 1;
+		config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
+	}
+
+	of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
+	if (config->clock_delay < -1200 || config->clock_delay > 1600)
+		return -EINVAL;
+
+	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+
+	/* Hardcode the sync pulse configurations for now. */
+	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
+	config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+	config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+
+	return 0;
+}
+
+static const int edid_i2c_addr = 0x7e;
+static const int packet_i2c_addr = 0x70;
+static const int cec_i2c_addr = 0x78;
+
+static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	struct adv7511_link_config link_config;
+	struct adv7511 *adv7511;
+	struct device *dev = &i2c->dev;
+	unsigned int val;
+	int ret;
+
+	if (!dev->of_node)
+		return -EINVAL;
+
+	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
+	if (!adv7511)
+		return -ENOMEM;
+
+	adv7511->powered = false;
+	adv7511->status = connector_status_disconnected;
+
+	if (dev->of_node)
+		adv7511->type = (enum adv7511_type)of_device_get_match_data(dev);
+	else
+		adv7511->type = id->driver_data;
+
+	memset(&link_config, 0, sizeof(link_config));
+
+	if (adv7511->type == ADV7511)
+		ret = adv7511_parse_dt(dev->of_node, &link_config);
+	else
+		ret = adv7533_parse_dt(dev->of_node, adv7511);
+	if (ret)
+		return ret;
+
+	/*
+	 * The power down GPIO is optional. If present, toggle it from active to
+	 * inactive to wake up the encoder.
+	 */
+	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(adv7511->gpio_pd))
+		return PTR_ERR(adv7511->gpio_pd);
+
+	if (adv7511->gpio_pd) {
+		mdelay(5);
+		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
+	}
+
+	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
+	if (IS_ERR(adv7511->regmap))
+		return PTR_ERR(adv7511->regmap);
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
+	if (ret)
+		return ret;
+	dev_dbg(dev, "Rev. %d\n", val);
+
+	if (adv7511->type == ADV7511)
+		ret = regmap_register_patch(adv7511->regmap,
+					    adv7511_fixed_registers,
+					    ARRAY_SIZE(adv7511_fixed_registers));
+	else
+		ret = adv7533_patch_registers(adv7511);
+	if (ret)
+		return ret;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
+	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+		     packet_i2c_addr);
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
+	adv7511_packet_disable(adv7511, 0xffff);
+
+	adv7511->i2c_main = i2c;
+	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
+	if (!adv7511->i2c_edid)
+		return -ENOMEM;
+
+	if (adv7511->type == ADV7533) {
+		ret = adv7533_init_cec(adv7511);
+		if (ret)
+			goto err_i2c_unregister_edid;
+	}
+
+	if (i2c->irq) {
+		init_waitqueue_head(&adv7511->wq);
+
+		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+						adv7511_irq_handler,
+						IRQF_ONESHOT, dev_name(dev),
+						adv7511);
+		if (ret)
+			goto err_unregister_cec;
+	}
+
+	/* CEC is unused for now */
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
+		     ADV7511_CEC_CTRL_POWER_DOWN);
+
+	adv7511_power_off(adv7511);
+
+	i2c_set_clientdata(i2c, adv7511);
+
+	if (adv7511->type == ADV7511)
+		adv7511_set_link_config(adv7511, &link_config);
+
+	adv7511->bridge.funcs = &adv7511_bridge_funcs;
+	adv7511->bridge.of_node = dev->of_node;
+
+	ret = drm_bridge_add(&adv7511->bridge);
+	if (ret) {
+		dev_err(dev, "failed to add adv7511 bridge\n");
+		goto err_unregister_cec;
+	}
+
+	return 0;
+
+err_unregister_cec:
+	adv7533_uninit_cec(adv7511);
+err_i2c_unregister_edid:
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	return ret;
+}
+
+static int adv7511_remove(struct i2c_client *i2c)
+{
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	if (adv7511->type == ADV7533) {
+		adv7533_detach_dsi(adv7511);
+		adv7533_uninit_cec(adv7511);
+	}
+
+	drm_bridge_remove(&adv7511->bridge);
+
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	kfree(adv7511->edid);
+
+	return 0;
+}
+
+static const struct i2c_device_id adv7511_i2c_ids[] = {
+	{ "adv7511", ADV7511 },
+	{ "adv7511w", ADV7511 },
+	{ "adv7513", ADV7511 },
+#ifdef CONFIG_DRM_I2C_ADV7533
+	{ "adv7533", ADV7533 },
+#endif
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
+
+static const struct of_device_id adv7511_of_ids[] = {
+	{ .compatible = "adi,adv7511", .data = (void *)ADV7511 },
+	{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
+	{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
+#ifdef CONFIG_DRM_I2C_ADV7533
+	{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
+#endif
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adv7511_of_ids);
+
+static struct mipi_dsi_driver adv7533_dsi_driver = {
+	.driver.name = "adv7533",
+};
+
+static struct i2c_driver adv7511_driver = {
+	.driver = {
+		.name = "adv7511",
+		.of_match_table = adv7511_of_ids,
+	},
+	.id_table = adv7511_i2c_ids,
+	.probe = adv7511_probe,
+	.remove = adv7511_remove,
+};
+
+static int __init adv7511_init(void)
+{
+	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+		mipi_dsi_driver_register(&adv7533_dsi_driver);
+
+	return i2c_add_driver(&adv7511_driver);
+}
+module_init(adv7511_init);
+
+static void __exit adv7511_exit(void)
+{
+	i2c_del_driver(&adv7511_driver);
+
+	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+		mipi_dsi_driver_unregister(&adv7533_dsi_driver);
+}
+module_exit(adv7511_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
new file mode 100644
index 000000000000..5eebd15899b1
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_graph.h>
+
+#include "adv7511.h"
+
+static const struct reg_sequence adv7533_fixed_registers[] = {
+	{ 0x16, 0x20 },
+	{ 0x9a, 0xe0 },
+	{ 0xba, 0x70 },
+	{ 0xde, 0x82 },
+	{ 0xe4, 0x40 },
+	{ 0xe5, 0x80 },
+};
+
+static const struct reg_sequence adv7533_cec_fixed_registers[] = {
+	{ 0x15, 0xd0 },
+	{ 0x17, 0xd0 },
+	{ 0x24, 0x20 },
+	{ 0x57, 0x11 },
+};
+
+static const struct regmap_config adv7533_cec_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static void adv7511_dsi_config_timing_gen(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	struct drm_display_mode *mode = &adv->curr_mode;
+	unsigned int hsw, hfp, hbp, vsw, vfp, vbp;
+	u8 clock_div_by_lanes[] = { 6, 4, 3 };	/* 2, 3, 4 lanes */
+
+	hsw = mode->hsync_end - mode->hsync_start;
+	hfp = mode->hsync_start - mode->hdisplay;
+	hbp = mode->htotal - mode->hsync_end;
+	vsw = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	/* set pixel clock divider mode */
+	regmap_write(adv->regmap_cec, 0x16,
+		     clock_div_by_lanes[dsi->lanes - 2] << 3);
+
+	/* horizontal porch params */
+	regmap_write(adv->regmap_cec, 0x28, mode->htotal >> 4);
+	regmap_write(adv->regmap_cec, 0x29, (mode->htotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2a, hsw >> 4);
+	regmap_write(adv->regmap_cec, 0x2b, (hsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2c, hfp >> 4);
+	regmap_write(adv->regmap_cec, 0x2d, (hfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2e, hbp >> 4);
+	regmap_write(adv->regmap_cec, 0x2f, (hbp << 4) & 0xff);
+
+	/* vertical porch params */
+	regmap_write(adv->regmap_cec, 0x30, mode->vtotal >> 4);
+	regmap_write(adv->regmap_cec, 0x31, (mode->vtotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x32, vsw >> 4);
+	regmap_write(adv->regmap_cec, 0x33, (vsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x34, vfp >> 4);
+	regmap_write(adv->regmap_cec, 0x35, (vfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x36, vbp >> 4);
+	regmap_write(adv->regmap_cec, 0x37, (vbp << 4) & 0xff);
+}
+
+void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+
+	if (adv->use_timing_gen)
+		adv7511_dsi_config_timing_gen(adv);
+
+	/* set number of dsi lanes */
+	regmap_write(adv->regmap_cec, 0x1c, dsi->lanes << 4);
+
+	if (adv->use_timing_gen) {
+		/* reset internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+		regmap_write(adv->regmap_cec, 0x27, 0x8b);
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+	} else {
+		/* disable internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0x0b);
+	}
+
+	/* enable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x89);
+	/* disable test mode */
+	regmap_write(adv->regmap_cec, 0x55, 0x00);
+
+	regmap_register_patch(adv->regmap_cec, adv7533_cec_fixed_registers,
+			      ARRAY_SIZE(adv7533_cec_fixed_registers));
+}
+
+void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+	/* disable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x0b);
+	/* disable internal timing generator */
+	regmap_write(adv->regmap_cec, 0x27, 0x0b);
+}
+
+void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	int lanes, ret;
+
+	if (adv->num_dsi_lanes != 4)
+		return;
+
+	if (mode->clock > 80000)
+		lanes = 4;
+	else
+		lanes = 3;
+
+	if (lanes != dsi->lanes) {
+		mipi_dsi_detach(dsi);
+		dsi->lanes = lanes;
+		ret = mipi_dsi_attach(dsi);
+		if (ret)
+			dev_err(&dsi->dev, "failed to change host lanes\n");
+	}
+}
+
+int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return regmap_register_patch(adv->regmap,
+				     adv7533_fixed_registers,
+				     ARRAY_SIZE(adv7533_fixed_registers));
+}
+
+void adv7533_uninit_cec(struct adv7511 *adv)
+{
+	i2c_unregister_device(adv->i2c_cec);
+}
+
+static const int cec_i2c_addr = 0x78;
+
+int adv7533_init_cec(struct adv7511 *adv)
+{
+	int ret;
+
+	adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter, cec_i2c_addr >> 1);
+	if (!adv->i2c_cec)
+		return -ENOMEM;
+
+	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
+					&adv7533_cec_regmap_config);
+	if (IS_ERR(adv->regmap_cec)) {
+		ret = PTR_ERR(adv->regmap_cec);
+		goto err;
+	}
+
+	ret = regmap_register_patch(adv->regmap_cec,
+				    adv7533_cec_fixed_registers,
+				    ARRAY_SIZE(adv7533_cec_fixed_registers));
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	adv7533_uninit_cec(adv);
+	return ret;
+}
+
+int adv7533_attach_dsi(struct adv7511 *adv)
+{
+	struct device *dev = &adv->i2c_main->dev;
+	struct mipi_dsi_host *host;
+	struct mipi_dsi_device *dsi;
+	int ret = 0;
+	const struct mipi_dsi_device_info info = { .type = "adv7533",
+						   .channel = 0,
+						   .node = NULL,
+						 };
+
+	host = of_find_mipi_dsi_host_by_node(adv->host_node);
+	if (!host) {
+		dev_err(dev, "failed to find dsi host\n");
+		return -EPROBE_DEFER;
+	}
+
+	dsi = mipi_dsi_device_register_full(host, &info);
+	if (IS_ERR(dsi)) {
+		dev_err(dev, "failed to create dsi device\n");
+		ret = PTR_ERR(dsi);
+		goto err_dsi_device;
+	}
+
+	adv->dsi = dsi;
+
+	dsi->lanes = adv->num_dsi_lanes;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+			  MIPI_DSI_MODE_EOT_PACKET | MIPI_DSI_MODE_VIDEO_HSE;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach dsi to host\n");
+		goto err_dsi_attach;
+	}
+
+	return 0;
+
+err_dsi_attach:
+	mipi_dsi_device_unregister(dsi);
+err_dsi_device:
+	return ret;
+}
+
+void adv7533_detach_dsi(struct adv7511 *adv)
+{
+	mipi_dsi_detach(adv->dsi);
+	mipi_dsi_device_unregister(adv->dsi);
+}
+
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
+{
+	u32 num_lanes;
+	struct device_node *endpoint;
+
+	of_property_read_u32(np, "adi,dsi-lanes", &num_lanes);
+
+	if (num_lanes < 1 || num_lanes > 4)
+		return -EINVAL;
+
+	adv->num_dsi_lanes = num_lanes;
+
+	endpoint = of_graph_get_next_endpoint(np, NULL);
+	if (!endpoint)
+		return -ENODEV;
+
+	adv->host_node = of_graph_get_remote_port_parent(endpoint);
+	if (!adv->host_node) {
+		of_node_put(endpoint);
+		return -ENODEV;
+	}
+
+	of_node_put(endpoint);
+	of_node_put(adv->host_node);
+
+	adv->use_timing_gen = !of_property_read_bool(np,
+						"adi,disable-timing-generator");
+
+	/* TODO: Check if these need to be parsed by DT or not */
+	adv->rgb = true;
+	adv->embedded_sync = false;
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index d087b054c360..f9f03bcba0af 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -986,16 +986,8 @@ unlock:
 	return num_modes;
 }
 
-static struct drm_encoder *anx78xx_best_encoder(struct drm_connector *connector)
-{
-	struct anx78xx *anx78xx = connector_to_anx78xx(connector);
-
-	return anx78xx->bridge.encoder;
-}
-
 static const struct drm_connector_helper_funcs anx78xx_connector_helper_funcs = {
 	.get_modes = anx78xx_get_modes,
-	.best_encoder = anx78xx_best_encoder,
 };
 
 static enum drm_connector_status anx78xx_detect(struct drm_connector *connector,
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 7699597070a1..32715daf73cb 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -938,7 +938,7 @@ int analogix_dp_get_modes(struct drm_connector *connector)
 		num_modes += drm_panel_get_modes(dp->plat_data->panel);
 
 	if (dp->plat_data->get_modes)
-		num_modes += dp->plat_data->get_modes(dp->plat_data);
+		num_modes += dp->plat_data->get_modes(dp->plat_data, connector);
 
 	return num_modes;
 }
@@ -1208,6 +1208,7 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 
 	switch (dp->plat_data->dev_type) {
 	case RK3288_DP:
+	case RK3399_EDP:
 		/*
 		 * Like Rk3288 DisplayPort TRM indicate that "Main link
 		 * containing 4 physical lanes of 2.7/1.62 Gbps/lane".
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index f09275d40f70..b45638043ec4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -127,10 +127,10 @@ enum analog_power_block {
 };
 
 enum dp_irq_type {
-	DP_IRQ_TYPE_HP_CABLE_IN,
-	DP_IRQ_TYPE_HP_CABLE_OUT,
-	DP_IRQ_TYPE_HP_CHANGE,
-	DP_IRQ_TYPE_UNKNOWN,
+	DP_IRQ_TYPE_HP_CABLE_IN  = BIT(0),
+	DP_IRQ_TYPE_HP_CABLE_OUT = BIT(1),
+	DP_IRQ_TYPE_HP_CHANGE    = BIT(2),
+	DP_IRQ_TYPE_UNKNOWN      = BIT(3),
 };
 
 struct video_info {
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 49205ef02be3..48030f0cf497 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -74,8 +74,12 @@ void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
 	reg = SEL_24M | TX_DVDD_BIT_1_0625V;
 	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
 
-	if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
-		writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
+		reg = REF_CLK_24M;
+		if (dp->plat_data->dev_type == RK3288_DP)
+			reg ^= REF_CLK_MASK;
+
+		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
 		writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
 		writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
 		writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
@@ -244,7 +248,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
 	u32 reg;
 	u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
 
-	if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
 		phy_pd_addr = ANALOGIX_DP_PD;
 
 	switch (block) {
@@ -448,7 +452,7 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
 	analogix_dp_reset_aux(dp);
 
 	/* Disable AUX transaction H/W retry */
-	if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
 		reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) |
 		      AUX_HW_RETRY_COUNT_SEL(3) |
 		      AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 337912b0aeab..cdcc6c5add5e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -163,8 +163,9 @@
 #define HSYNC_POLARITY_CFG			(0x1 << 0)
 
 /* ANALOGIX_DP_PLL_REG_1 */
-#define REF_CLK_24M				(0x1 << 1)
-#define REF_CLK_27M				(0x0 << 1)
+#define REF_CLK_24M				(0x1 << 0)
+#define REF_CLK_27M				(0x0 << 0)
+#define REF_CLK_MASK				(0x1 << 0)
 
 /* ANALOGIX_DP_LANE_MAP */
 #define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
index c9d941283d30..77ab47341658 100644
--- a/drivers/gpu/drm/bridge/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/dw-hdmi.c
@@ -1476,15 +1476,6 @@ dw_hdmi_connector_mode_valid(struct drm_connector *connector,
 	return mode_status;
 }
 
-static struct drm_encoder *dw_hdmi_connector_best_encoder(struct drm_connector
-							   *connector)
-{
-	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
-					     connector);
-
-	return hdmi->encoder;
-}
-
 static void dw_hdmi_connector_destroy(struct drm_connector *connector)
 {
 	drm_connector_unregister(connector);
@@ -1504,14 +1495,6 @@ static void dw_hdmi_connector_force(struct drm_connector *connector)
 }
 
 static const struct drm_connector_funcs dw_hdmi_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.detect = dw_hdmi_connector_detect,
-	.destroy = dw_hdmi_connector_destroy,
-	.force = dw_hdmi_connector_force,
-};
-
-static const struct drm_connector_funcs dw_hdmi_atomic_connector_funcs = {
 	.dpms = drm_atomic_helper_connector_dpms,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.detect = dw_hdmi_connector_detect,
@@ -1525,7 +1508,7 @@ static const struct drm_connector_funcs dw_hdmi_atomic_connector_funcs = {
 static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
 	.get_modes = dw_hdmi_connector_get_modes,
 	.mode_valid = dw_hdmi_connector_mode_valid,
-	.best_encoder = dw_hdmi_connector_best_encoder,
+	.best_encoder = drm_atomic_helper_best_encoder,
 };
 
 static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
@@ -1643,14 +1626,9 @@ static int dw_hdmi_register(struct drm_device *drm, struct dw_hdmi *hdmi)
 	drm_connector_helper_add(&hdmi->connector,
 				 &dw_hdmi_connector_helper_funcs);
 
-	if (drm_core_check_feature(drm, DRIVER_ATOMIC))
-		drm_connector_init(drm, &hdmi->connector,
-				   &dw_hdmi_atomic_connector_funcs,
-				   DRM_MODE_CONNECTOR_HDMIA);
-	else
-		drm_connector_init(drm, &hdmi->connector,
-				   &dw_hdmi_connector_funcs,
-				   DRM_MODE_CONNECTOR_HDMIA);
+	drm_connector_init(drm, &hdmi->connector,
+			   &dw_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_HDMIA);
 
 	drm_mode_connector_attach_encoder(&hdmi->connector, encoder);
 
diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c
index 7ecd59f70b8e..93f3dacf9e27 100644
--- a/drivers/gpu/drm/bridge/nxp-ptn3460.c
+++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
@@ -235,16 +235,8 @@ out:
 	return num_modes;
 }
 
-static struct drm_encoder *ptn3460_best_encoder(struct drm_connector *connector)
-{
-	struct ptn3460_bridge *ptn_bridge = connector_to_ptn3460(connector);
-
-	return ptn_bridge->bridge.encoder;
-}
-
 static const struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = {
 	.get_modes = ptn3460_get_modes,
-	.best_encoder = ptn3460_best_encoder,
 };
 
 static enum drm_connector_status ptn3460_detect(struct drm_connector *connector,
diff --git a/drivers/gpu/drm/bridge/parade-ps8622.c b/drivers/gpu/drm/bridge/parade-ps8622.c
index be881e9fef8f..583b8ce614e3 100644
--- a/drivers/gpu/drm/bridge/parade-ps8622.c
+++ b/drivers/gpu/drm/bridge/parade-ps8622.c
@@ -474,18 +474,8 @@ static int ps8622_get_modes(struct drm_connector *connector)
 	return drm_panel_get_modes(ps8622->panel);
 }
 
-static struct drm_encoder *ps8622_best_encoder(struct drm_connector *connector)
-{
-	struct ps8622_bridge *ps8622;
-
-	ps8622 = connector_to_ps8622(connector);
-
-	return ps8622->bridge.encoder;
-}
-
 static const struct drm_connector_helper_funcs ps8622_connector_helper_funcs = {
 	.get_modes = ps8622_get_modes,
-	.best_encoder = ps8622_best_encoder,
 };
 
 static enum drm_connector_status ps8622_detect(struct drm_connector *connector,
@@ -646,9 +636,7 @@ static int ps8622_remove(struct i2c_client *client)
 {
 	struct ps8622_bridge *ps8622 = i2c_get_clientdata(client);
 
-	if (ps8622->bl)
-		backlight_device_unregister(ps8622->bl);
-
+	backlight_device_unregister(ps8622->bl);
 	drm_bridge_remove(&ps8622->bridge);
 
 	return 0;
diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
new file mode 100644
index 000000000000..9126d0306ab5
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -0,0 +1,467 @@
+/*
+ * Copyright (C) 2016 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * Authors:	      Bo Shen <voice.shen@atmel.com>
+ *		      Boris Brezillon <boris.brezillon@free-electrons.com>
+ *		      Wu, Songjun <Songjun.Wu@atmel.com>
+ *
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+
+#define SII902X_TPI_VIDEO_DATA			0x0
+
+#define SII902X_TPI_PIXEL_REPETITION		0x8
+#define SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT     BIT(5)
+#define SII902X_TPI_AVI_PIXEL_REP_RISING_EDGE   BIT(4)
+#define SII902X_TPI_AVI_PIXEL_REP_4X		3
+#define SII902X_TPI_AVI_PIXEL_REP_2X		1
+#define SII902X_TPI_AVI_PIXEL_REP_NONE		0
+#define SII902X_TPI_CLK_RATIO_HALF		(0 << 6)
+#define SII902X_TPI_CLK_RATIO_1X		(1 << 6)
+#define SII902X_TPI_CLK_RATIO_2X		(2 << 6)
+#define SII902X_TPI_CLK_RATIO_4X		(3 << 6)
+
+#define SII902X_TPI_AVI_IN_FORMAT		0x9
+#define SII902X_TPI_AVI_INPUT_BITMODE_12BIT	BIT(7)
+#define SII902X_TPI_AVI_INPUT_DITHER		BIT(6)
+#define SII902X_TPI_AVI_INPUT_RANGE_LIMITED	(2 << 2)
+#define SII902X_TPI_AVI_INPUT_RANGE_FULL	(1 << 2)
+#define SII902X_TPI_AVI_INPUT_RANGE_AUTO	(0 << 2)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_BLACK	(3 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV422	(2 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV444	(1 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_RGB	(0 << 0)
+
+#define SII902X_TPI_AVI_INFOFRAME		0x0c
+
+#define SII902X_SYS_CTRL_DATA			0x1a
+#define SII902X_SYS_CTRL_PWR_DWN		BIT(4)
+#define SII902X_SYS_CTRL_AV_MUTE		BIT(3)
+#define SII902X_SYS_CTRL_DDC_BUS_REQ		BIT(2)
+#define SII902X_SYS_CTRL_DDC_BUS_GRTD		BIT(1)
+#define SII902X_SYS_CTRL_OUTPUT_MODE		BIT(0)
+#define SII902X_SYS_CTRL_OUTPUT_HDMI		1
+#define SII902X_SYS_CTRL_OUTPUT_DVI		0
+
+#define SII902X_REG_CHIPID(n)			(0x1b + (n))
+
+#define SII902X_PWR_STATE_CTRL			0x1e
+#define SII902X_AVI_POWER_STATE_MSK		GENMASK(1, 0)
+#define SII902X_AVI_POWER_STATE_D(l)		((l) & SII902X_AVI_POWER_STATE_MSK)
+
+#define SII902X_INT_ENABLE			0x3c
+#define SII902X_INT_STATUS			0x3d
+#define SII902X_HOTPLUG_EVENT			BIT(0)
+#define SII902X_PLUGGED_STATUS			BIT(2)
+
+#define SII902X_REG_TPI_RQB			0xc7
+
+#define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS	500
+
+struct sii902x {
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+	struct gpio_desc *reset_gpio;
+};
+
+static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct sii902x, bridge);
+}
+
+static inline struct sii902x *connector_to_sii902x(struct drm_connector *con)
+{
+	return container_of(con, struct sii902x, connector);
+}
+
+static void sii902x_reset(struct sii902x *sii902x)
+{
+	if (!sii902x->reset_gpio)
+		return;
+
+	gpiod_set_value(sii902x->reset_gpio, 1);
+
+	/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
+	usleep_range(150, 200);
+
+	gpiod_set_value(sii902x->reset_gpio, 0);
+}
+
+static enum drm_connector_status
+sii902x_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct sii902x *sii902x = connector_to_sii902x(connector);
+	unsigned int status;
+
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+
+	return (status & SII902X_PLUGGED_STATUS) ?
+	       connector_status_connected : connector_status_disconnected;
+}
+
+static const struct drm_connector_funcs sii902x_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.detect = sii902x_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int sii902x_get_modes(struct drm_connector *connector)
+{
+	struct sii902x *sii902x = connector_to_sii902x(connector);
+	struct regmap *regmap = sii902x->regmap;
+	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	unsigned long timeout;
+	unsigned int status;
+	struct edid *edid;
+	int num = 0;
+	int ret;
+
+	ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ);
+	if (ret)
+		return ret;
+
+	timeout = jiffies +
+		  msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
+	do {
+		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
+		if (ret)
+			return ret;
+	} while (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
+		 time_before(jiffies, timeout));
+
+	if (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
+		dev_err(&sii902x->i2c->dev, "failed to acquire the i2c bus");
+		return -ETIMEDOUT;
+	}
+
+	ret = regmap_write(regmap, SII902X_SYS_CTRL_DATA, status);
+	if (ret)
+		return ret;
+
+	edid = drm_get_edid(connector, sii902x->i2c->adapter);
+	drm_mode_connector_update_edid_property(connector, edid);
+	if (edid) {
+		num = drm_add_edid_modes(connector, edid);
+		kfree(edid);
+	}
+
+	ret = drm_display_info_set_bus_formats(&connector->display_info,
+					       &bus_format, 1);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ |
+				 SII902X_SYS_CTRL_DDC_BUS_GRTD, 0);
+	if (ret)
+		return ret;
+
+	timeout = jiffies +
+		  msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
+	do {
+		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
+		if (ret)
+			return ret;
+	} while (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
+			   SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
+		 time_before(jiffies, timeout));
+
+	if (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
+		      SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
+		dev_err(&sii902x->i2c->dev, "failed to release the i2c bus");
+		return -ETIMEDOUT;
+	}
+
+	return num;
+}
+
+static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
+					       struct drm_display_mode *mode)
+{
+	/* TODO: check mode */
+
+	return MODE_OK;
+}
+
+static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
+	.get_modes = sii902x_get_modes,
+	.mode_valid = sii902x_mode_valid,
+};
+
+static void sii902x_bridge_disable(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+
+	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
+			   SII902X_SYS_CTRL_PWR_DWN,
+			   SII902X_SYS_CTRL_PWR_DWN);
+}
+
+static void sii902x_bridge_enable(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+
+	regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL,
+			   SII902X_AVI_POWER_STATE_MSK,
+			   SII902X_AVI_POWER_STATE_D(0));
+	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
+			   SII902X_SYS_CTRL_PWR_DWN, 0);
+}
+
+static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adj)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+	struct regmap *regmap = sii902x->regmap;
+	u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
+	struct hdmi_avi_infoframe frame;
+	int ret;
+
+	buf[0] = adj->clock;
+	buf[1] = adj->clock >> 8;
+	buf[2] = adj->vrefresh;
+	buf[3] = 0x00;
+	buf[4] = adj->hdisplay;
+	buf[5] = adj->hdisplay >> 8;
+	buf[6] = adj->vdisplay;
+	buf[7] = adj->vdisplay >> 8;
+	buf[8] = SII902X_TPI_CLK_RATIO_1X | SII902X_TPI_AVI_PIXEL_REP_NONE |
+		 SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT;
+	buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO |
+		 SII902X_TPI_AVI_INPUT_COLORSPACE_RGB;
+
+	ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10);
+	if (ret)
+		return;
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj);
+	if (ret < 0) {
+		DRM_ERROR("couldn't fill AVI infoframe\n");
+		return;
+	}
+
+	ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
+	if (ret < 0) {
+		DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
+		return;
+	}
+
+	/* Do not send the infoframe header, but keep the CRC field. */
+	regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME,
+			  buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
+			  HDMI_AVI_INFOFRAME_SIZE + 1);
+}
+
+static int sii902x_bridge_attach(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+	struct drm_device *drm = bridge->dev;
+	int ret;
+
+	drm_connector_helper_add(&sii902x->connector,
+				 &sii902x_connector_helper_funcs);
+
+	if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
+		dev_err(&sii902x->i2c->dev,
+			"sii902x driver is only compatible with DRM devices supporting atomic updates");
+		return -ENOTSUPP;
+	}
+
+	ret = drm_connector_init(drm, &sii902x->connector,
+				 &sii902x_connector_funcs,
+				 DRM_MODE_CONNECTOR_HDMIA);
+	if (ret)
+		return ret;
+
+	if (sii902x->i2c->irq > 0)
+		sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
+
+	drm_mode_connector_attach_encoder(&sii902x->connector, bridge->encoder);
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs sii902x_bridge_funcs = {
+	.attach = sii902x_bridge_attach,
+	.mode_set = sii902x_bridge_mode_set,
+	.disable = sii902x_bridge_disable,
+	.enable = sii902x_bridge_enable,
+};
+
+static const struct regmap_range sii902x_volatile_ranges[] = {
+	{ .range_min = 0, .range_max = 0xff },
+};
+
+static const struct regmap_access_table sii902x_volatile_table = {
+	.yes_ranges = sii902x_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges),
+};
+
+static const struct regmap_config sii902x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &sii902x_volatile_table,
+	.cache_type = REGCACHE_NONE,
+};
+
+static irqreturn_t sii902x_interrupt(int irq, void *data)
+{
+	struct sii902x *sii902x = data;
+	unsigned int status = 0;
+
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
+
+	if ((status & SII902X_HOTPLUG_EVENT) && sii902x->bridge.dev)
+		drm_helper_hpd_irq_event(sii902x->bridge.dev);
+
+	return IRQ_HANDLED;
+}
+
+static int sii902x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	unsigned int status = 0;
+	struct sii902x *sii902x;
+	u8 chipid[4];
+	int ret;
+
+	sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
+	if (!sii902x)
+		return -ENOMEM;
+
+	sii902x->i2c = client;
+	sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
+	if (IS_ERR(sii902x->regmap))
+		return PTR_ERR(sii902x->regmap);
+
+	sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						      GPIOD_OUT_LOW);
+	if (IS_ERR(sii902x->reset_gpio)) {
+		dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
+			PTR_ERR(sii902x->reset_gpio));
+		return PTR_ERR(sii902x->reset_gpio);
+	}
+
+	sii902x_reset(sii902x);
+
+	ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0),
+			       &chipid, 4);
+	if (ret) {
+		dev_err(dev, "regmap_read failed %d\n", ret);
+		return ret;
+	}
+
+	if (chipid[0] != 0xb0) {
+		dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
+			chipid[0]);
+		return -EINVAL;
+	}
+
+	/* Clear all pending interrupts */
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
+
+	if (client->irq > 0) {
+		regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
+			     SII902X_HOTPLUG_EVENT);
+
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						sii902x_interrupt,
+						IRQF_ONESHOT, dev_name(dev),
+						sii902x);
+		if (ret)
+			return ret;
+	}
+
+	sii902x->bridge.funcs = &sii902x_bridge_funcs;
+	sii902x->bridge.of_node = dev->of_node;
+	ret = drm_bridge_add(&sii902x->bridge);
+	if (ret) {
+		dev_err(dev, "Failed to add drm_bridge\n");
+		return ret;
+	}
+
+	i2c_set_clientdata(client, sii902x);
+
+	return 0;
+}
+
+static int sii902x_remove(struct i2c_client *client)
+
+{
+	struct sii902x *sii902x = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&sii902x->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id sii902x_dt_ids[] = {
+	{ .compatible = "sil,sii9022", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sii902x_dt_ids);
+
+static const struct i2c_device_id sii902x_i2c_ids[] = {
+	{ "sii9022", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids);
+
+static struct i2c_driver sii902x_driver = {
+	.probe = sii902x_probe,
+	.remove = sii902x_remove,
+	.driver = {
+		.name = "sii902x",
+		.of_match_table = sii902x_dt_ids,
+	},
+	.id_table = sii902x_i2c_ids,
+};
+module_i2c_driver(sii902x_driver);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("SII902x RGB -> HDMI bridges");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
new file mode 100644
index 000000000000..a09825d8c94a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -0,0 +1,1413 @@
+/*
+ * tc358767 eDP bridge driver
+ *
+ * Copyright (C) 2016 CogentEmbedded Inc
+ * Author: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+ *
+ * Copyright (C) 2016 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * Initially based on: drivers/gpu/drm/i2c/tda998x_drv.c
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+
+/* Registers */
+
+/* Display Parallel Interface */
+#define DPIPXLFMT		0x0440
+#define VS_POL_ACTIVE_LOW		(1 << 10)
+#define HS_POL_ACTIVE_LOW		(1 << 9)
+#define DE_POL_ACTIVE_HIGH		(0 << 8)
+#define SUB_CFG_TYPE_CONFIG1		(0 << 2) /* LSB aligned */
+#define SUB_CFG_TYPE_CONFIG2		(1 << 2) /* Loosely Packed */
+#define SUB_CFG_TYPE_CONFIG3		(2 << 2) /* LSB aligned 8-bit */
+#define DPI_BPP_RGB888			(0 << 0)
+#define DPI_BPP_RGB666			(1 << 0)
+#define DPI_BPP_RGB565			(2 << 0)
+
+/* Video Path */
+#define VPCTRL0			0x0450
+#define OPXLFMT_RGB666			(0 << 8)
+#define OPXLFMT_RGB888			(1 << 8)
+#define FRMSYNC_DISABLED		(0 << 4) /* Video Timing Gen Disabled */
+#define FRMSYNC_ENABLED			(1 << 4) /* Video Timing Gen Enabled */
+#define MSF_DISABLED			(0 << 0) /* Magic Square FRC disabled */
+#define MSF_ENABLED			(1 << 0) /* Magic Square FRC enabled */
+#define HTIM01			0x0454
+#define HTIM02			0x0458
+#define VTIM01			0x045c
+#define VTIM02			0x0460
+#define VFUEN0			0x0464
+#define VFUEN				BIT(0)   /* Video Frame Timing Upload */
+
+/* System */
+#define TC_IDREG		0x0500
+#define SYSCTRL			0x0510
+#define DP0_AUDSRC_NO_INPUT		(0 << 3)
+#define DP0_AUDSRC_I2S_RX		(1 << 3)
+#define DP0_VIDSRC_NO_INPUT		(0 << 0)
+#define DP0_VIDSRC_DSI_RX		(1 << 0)
+#define DP0_VIDSRC_DPI_RX		(2 << 0)
+#define DP0_VIDSRC_COLOR_BAR		(3 << 0)
+
+/* Control */
+#define DP0CTL			0x0600
+#define VID_MN_GEN			BIT(6)   /* Auto-generate M/N values */
+#define EF_EN				BIT(5)   /* Enable Enhanced Framing */
+#define VID_EN				BIT(1)   /* Video transmission enable */
+#define DP_EN				BIT(0)   /* Enable DPTX function */
+
+/* Clocks */
+#define DP0_VIDMNGEN0		0x0610
+#define DP0_VIDMNGEN1		0x0614
+#define DP0_VMNGENSTATUS	0x0618
+
+/* Main Channel */
+#define DP0_SECSAMPLE		0x0640
+#define DP0_VIDSYNCDELAY	0x0644
+#define DP0_TOTALVAL		0x0648
+#define DP0_STARTVAL		0x064c
+#define DP0_ACTIVEVAL		0x0650
+#define DP0_SYNCVAL		0x0654
+#define DP0_MISC		0x0658
+#define TU_SIZE_RECOMMENDED		(0x3f << 16) /* LSCLK cycles per TU */
+#define BPC_6				(0 << 5)
+#define BPC_8				(1 << 5)
+
+/* AUX channel */
+#define DP0_AUXCFG0		0x0660
+#define DP0_AUXCFG1		0x0664
+#define AUX_RX_FILTER_EN		BIT(16)
+
+#define DP0_AUXADDR		0x0668
+#define DP0_AUXWDATA(i)		(0x066c + (i) * 4)
+#define DP0_AUXRDATA(i)		(0x067c + (i) * 4)
+#define DP0_AUXSTATUS		0x068c
+#define AUX_STATUS_MASK			0xf0
+#define AUX_STATUS_SHIFT		4
+#define AUX_TIMEOUT			BIT(1)
+#define AUX_BUSY			BIT(0)
+#define DP0_AUXI2CADR		0x0698
+
+/* Link Training */
+#define DP0_SRCCTRL		0x06a0
+#define DP0_SRCCTRL_SCRMBLDIS		BIT(13)
+#define DP0_SRCCTRL_EN810B		BIT(12)
+#define DP0_SRCCTRL_NOTP		(0 << 8)
+#define DP0_SRCCTRL_TP1			(1 << 8)
+#define DP0_SRCCTRL_TP2			(2 << 8)
+#define DP0_SRCCTRL_LANESKEW		BIT(7)
+#define DP0_SRCCTRL_SSCG		BIT(3)
+#define DP0_SRCCTRL_LANES_1		(0 << 2)
+#define DP0_SRCCTRL_LANES_2		(1 << 2)
+#define DP0_SRCCTRL_BW27		(1 << 1)
+#define DP0_SRCCTRL_BW162		(0 << 1)
+#define DP0_SRCCTRL_AUTOCORRECT		BIT(0)
+#define DP0_LTSTAT		0x06d0
+#define LT_LOOPDONE			BIT(13)
+#define LT_STATUS_MASK			(0x1f << 8)
+#define LT_CHANNEL1_EQ_BITS		(DP_CHANNEL_EQ_BITS << 4)
+#define LT_INTERLANE_ALIGN_DONE		BIT(3)
+#define LT_CHANNEL0_EQ_BITS		(DP_CHANNEL_EQ_BITS)
+#define DP0_SNKLTCHGREQ		0x06d4
+#define DP0_LTLOOPCTRL		0x06d8
+#define DP0_SNKLTCTRL		0x06e4
+
+/* PHY */
+#define DP_PHY_CTRL		0x0800
+#define DP_PHY_RST			BIT(28)  /* DP PHY Global Soft Reset */
+#define BGREN				BIT(25)  /* AUX PHY BGR Enable */
+#define PWR_SW_EN			BIT(24)  /* PHY Power Switch Enable */
+#define PHY_M1_RST			BIT(12)  /* Reset PHY1 Main Channel */
+#define PHY_RDY				BIT(16)  /* PHY Main Channels Ready */
+#define PHY_M0_RST			BIT(8)   /* Reset PHY0 Main Channel */
+#define PHY_A0_EN			BIT(1)   /* PHY Aux Channel0 Enable */
+#define PHY_M0_EN			BIT(0)   /* PHY Main Channel0 Enable */
+
+/* PLL */
+#define DP0_PLLCTRL		0x0900
+#define DP1_PLLCTRL		0x0904	/* not defined in DS */
+#define PXL_PLLCTRL		0x0908
+#define PLLUPDATE			BIT(2)
+#define PLLBYP				BIT(1)
+#define PLLEN				BIT(0)
+#define PXL_PLLPARAM		0x0914
+#define IN_SEL_REFCLK			(0 << 14)
+#define SYS_PLLPARAM		0x0918
+#define REF_FREQ_38M4			(0 << 8) /* 38.4 MHz */
+#define REF_FREQ_19M2			(1 << 8) /* 19.2 MHz */
+#define REF_FREQ_26M			(2 << 8) /* 26 MHz */
+#define REF_FREQ_13M			(3 << 8) /* 13 MHz */
+#define SYSCLK_SEL_LSCLK		(0 << 4)
+#define LSCLK_DIV_1			(0 << 0)
+#define LSCLK_DIV_2			(1 << 0)
+
+/* Test & Debug */
+#define TSTCTL			0x0a00
+#define PLL_DBG			0x0a04
+
+static bool tc_test_pattern;
+module_param_named(test, tc_test_pattern, bool, 0644);
+
+struct tc_edp_link {
+	struct drm_dp_link	base;
+	u8			assr;
+	int			scrambler_dis;
+	int			spread;
+	int			coding8b10b;
+	u8			swing;
+	u8			preemp;
+};
+
+struct tc_data {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct drm_dp_aux	aux;
+
+	struct drm_bridge	bridge;
+	struct drm_connector	connector;
+	struct drm_panel	*panel;
+
+	/* link settings */
+	struct tc_edp_link	link;
+
+	/* display edid */
+	struct edid		*edid;
+	/* current mode */
+	struct drm_display_mode	*mode;
+
+	u32			rev;
+	u8			assr;
+
+	struct gpio_desc	*sd_gpio;
+	struct gpio_desc	*reset_gpio;
+	struct clk		*refclk;
+};
+
+static inline struct tc_data *aux_to_tc(struct drm_dp_aux *a)
+{
+	return container_of(a, struct tc_data, aux);
+}
+
+static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
+{
+	return container_of(b, struct tc_data, bridge);
+}
+
+static inline struct tc_data *connector_to_tc(struct drm_connector *c)
+{
+	return container_of(c, struct tc_data, connector);
+}
+
+/* Simple macros to avoid repeated error checks */
+#define tc_write(reg, var)					\
+	do {							\
+		ret = regmap_write(tc->regmap, reg, var);	\
+		if (ret)					\
+			goto err;				\
+	} while (0)
+#define tc_read(reg, var)					\
+	do {							\
+		ret = regmap_read(tc->regmap, reg, var);	\
+		if (ret)					\
+			goto err;				\
+	} while (0)
+
+static inline int tc_poll_timeout(struct regmap *map, unsigned int addr,
+				  unsigned int cond_mask,
+				  unsigned int cond_value,
+				  unsigned long sleep_us, u64 timeout_us)
+{
+	ktime_t timeout = ktime_add_us(ktime_get(), timeout_us);
+	unsigned int val;
+	int ret;
+
+	for (;;) {
+		ret = regmap_read(map, addr, &val);
+		if (ret)
+			break;
+		if ((val & cond_mask) == cond_value)
+			break;
+		if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) {
+			ret = regmap_read(map, addr, &val);
+			break;
+		}
+		if (sleep_us)
+			usleep_range((sleep_us >> 2) + 1, sleep_us);
+	}
+	return ret ?: (((val & cond_mask) == cond_value) ? 0 : -ETIMEDOUT);
+}
+
+static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
+{
+	return tc_poll_timeout(tc->regmap, DP0_AUXSTATUS, AUX_BUSY, 0,
+			       1000, 1000 * timeout_ms);
+}
+
+static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
+{
+	int ret;
+	u32 value;
+
+	ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &value);
+	if (ret < 0)
+		return ret;
+	if (value & AUX_BUSY) {
+		if (value & AUX_TIMEOUT) {
+			dev_err(tc->dev, "i2c access timeout!\n");
+			return -ETIMEDOUT;
+		}
+		return -EBUSY;
+	}
+
+	*reply = (value & AUX_STATUS_MASK) >> AUX_STATUS_SHIFT;
+	return 0;
+}
+
+static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
+			       struct drm_dp_aux_msg *msg)
+{
+	struct tc_data *tc = aux_to_tc(aux);
+	size_t size = min_t(size_t, 8, msg->size);
+	u8 request = msg->request & ~DP_AUX_I2C_MOT;
+	u8 *buf = msg->buffer;
+	u32 tmp = 0;
+	int i = 0;
+	int ret;
+
+	if (size == 0)
+		return 0;
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	if (request == DP_AUX_I2C_WRITE || request == DP_AUX_NATIVE_WRITE) {
+		/* Store data */
+		while (i < size) {
+			if (request == DP_AUX_NATIVE_WRITE)
+				tmp = tmp | (buf[i] << (8 * (i & 0x3)));
+			else
+				tmp = (tmp << 8) | buf[i];
+			i++;
+			if (((i % 4) == 0) || (i == size)) {
+				tc_write(DP0_AUXWDATA(i >> 2), tmp);
+				tmp = 0;
+			}
+		}
+	} else if (request != DP_AUX_I2C_READ &&
+		   request != DP_AUX_NATIVE_READ) {
+		return -EINVAL;
+	}
+
+	/* Store address */
+	tc_write(DP0_AUXADDR, msg->address);
+	/* Start transfer */
+	tc_write(DP0_AUXCFG0, ((size - 1) << 8) | request);
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	ret = tc_aux_get_status(tc, &msg->reply);
+	if (ret)
+		goto err;
+
+	if (request == DP_AUX_I2C_READ || request == DP_AUX_NATIVE_READ) {
+		/* Read data */
+		while (i < size) {
+			if ((i % 4) == 0)
+				tc_read(DP0_AUXRDATA(i >> 2), &tmp);
+			buf[i] = tmp & 0xff;
+			tmp = tmp >> 8;
+			i++;
+		}
+	}
+
+	return size;
+err:
+	return ret;
+}
+
+static const char * const training_pattern1_errors[] = {
+	"No errors",
+	"Aux write error",
+	"Aux read error",
+	"Max voltage reached error",
+	"Loop counter expired error",
+	"res", "res", "res"
+};
+
+static const char * const training_pattern2_errors[] = {
+	"No errors",
+	"Aux write error",
+	"Aux read error",
+	"Clock recovery failed error",
+	"Loop counter expired error",
+	"res", "res", "res"
+};
+
+static u32 tc_srcctrl(struct tc_data *tc)
+{
+	/*
+	 * No training pattern, skew lane 1 data by two LSCLK cycles with
+	 * respect to lane 0 data, AutoCorrect Mode = 0
+	 */
+	u32 reg = DP0_SRCCTRL_NOTP | DP0_SRCCTRL_LANESKEW;
+
+	if (tc->link.scrambler_dis)
+		reg |= DP0_SRCCTRL_SCRMBLDIS;	/* Scrambler Disabled */
+	if (tc->link.coding8b10b)
+		/* Enable 8/10B Encoder (TxData[19:16] not used) */
+		reg |= DP0_SRCCTRL_EN810B;
+	if (tc->link.spread)
+		reg |= DP0_SRCCTRL_SSCG;	/* Spread Spectrum Enable */
+	if (tc->link.base.num_lanes == 2)
+		reg |= DP0_SRCCTRL_LANES_2;	/* Two Main Channel Lanes */
+	if (tc->link.base.rate != 162000)
+		reg |= DP0_SRCCTRL_BW27;	/* 2.7 Gbps link */
+	return reg;
+}
+
+static void tc_wait_pll_lock(struct tc_data *tc)
+{
+	/* Wait for PLL to lock: up to 2.09 ms, depending on refclk */
+	usleep_range(3000, 6000);
+}
+
+static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
+{
+	int ret;
+	int i_pre, best_pre = 1;
+	int i_post, best_post = 1;
+	int div, best_div = 1;
+	int mul, best_mul = 1;
+	int delta, best_delta;
+	int ext_div[] = {1, 2, 3, 5, 7};
+	int best_pixelclock = 0;
+	int vco_hi = 0;
+
+	dev_dbg(tc->dev, "PLL: requested %d pixelclock, ref %d\n", pixelclock,
+		refclk);
+	best_delta = pixelclock;
+	/* Loop over all possible ext_divs, skipping invalid configurations */
+	for (i_pre = 0; i_pre < ARRAY_SIZE(ext_div); i_pre++) {
+		/*
+		 * refclk / ext_pre_div should be in the 1 to 200 MHz range.
+		 * We don't allow any refclk > 200 MHz, only check lower bounds.
+		 */
+		if (refclk / ext_div[i_pre] < 1000000)
+			continue;
+		for (i_post = 0; i_post < ARRAY_SIZE(ext_div); i_post++) {
+			for (div = 1; div <= 16; div++) {
+				u32 clk;
+				u64 tmp;
+
+				tmp = pixelclock * ext_div[i_pre] *
+				      ext_div[i_post] * div;
+				do_div(tmp, refclk);
+				mul = tmp;
+
+				/* Check limits */
+				if ((mul < 1) || (mul > 128))
+					continue;
+
+				clk = (refclk / ext_div[i_pre] / div) * mul;
+				/*
+				 * refclk * mul / (ext_pre_div * pre_div)
+				 * should be in the 150 to 650 MHz range
+				 */
+				if ((clk > 650000000) || (clk < 150000000))
+					continue;
+
+				clk = clk / ext_div[i_post];
+				delta = clk - pixelclock;
+
+				if (abs(delta) < abs(best_delta)) {
+					best_pre = i_pre;
+					best_post = i_post;
+					best_div = div;
+					best_mul = mul;
+					best_delta = delta;
+					best_pixelclock = clk;
+				}
+			}
+		}
+	}
+	if (best_pixelclock == 0) {
+		dev_err(tc->dev, "Failed to calc clock for %d pixelclock\n",
+			pixelclock);
+		return -EINVAL;
+	}
+
+	dev_dbg(tc->dev, "PLL: got %d, delta %d\n", best_pixelclock,
+		best_delta);
+	dev_dbg(tc->dev, "PLL: %d / %d / %d * %d / %d\n", refclk,
+		ext_div[best_pre], best_div, best_mul, ext_div[best_post]);
+
+	/* if VCO >= 300 MHz */
+	if (refclk / ext_div[best_pre] / best_div * best_mul >= 300000000)
+		vco_hi = 1;
+	/* see DS */
+	if (best_div == 16)
+		best_div = 0;
+	if (best_mul == 128)
+		best_mul = 0;
+
+	/* Power up PLL and switch to bypass */
+	tc_write(PXL_PLLCTRL, PLLBYP | PLLEN);
+
+	tc_write(PXL_PLLPARAM,
+		 (vco_hi << 24) |		/* For PLL VCO >= 300 MHz = 1 */
+		 (ext_div[best_pre] << 20) |	/* External Pre-divider */
+		 (ext_div[best_post] << 16) |	/* External Post-divider */
+		 IN_SEL_REFCLK |		/* Use RefClk as PLL input */
+		 (best_div << 8) |		/* Divider for PLL RefClk */
+		 (best_mul << 0));		/* Multiplier for PLL */
+
+	/* Force PLL parameter update and disable bypass */
+	tc_write(PXL_PLLCTRL, PLLUPDATE | PLLEN);
+
+	tc_wait_pll_lock(tc);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_pxl_pll_dis(struct tc_data *tc)
+{
+	/* Enable PLL bypass, power down PLL */
+	return regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP);
+}
+
+static int tc_stream_clock_calc(struct tc_data *tc)
+{
+	int ret;
+	/*
+	 * If the Stream clock and Link Symbol clock are
+	 * asynchronous with each other, the value of M changes over
+	 * time. This way of generating link clock and stream
+	 * clock is called Asynchronous Clock mode. The value M
+	 * must change while the value N stays constant. The
+	 * value of N in this Asynchronous Clock mode must be set
+	 * to 2^15 or 32,768.
+	 *
+	 * LSCLK = 1/10 of high speed link clock
+	 *
+	 * f_STRMCLK = M/N * f_LSCLK
+	 * M/N = f_STRMCLK / f_LSCLK
+	 *
+	 */
+	tc_write(DP0_VIDMNGEN1, 32768);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_aux_link_setup(struct tc_data *tc)
+{
+	unsigned long rate;
+	u32 value;
+	int ret;
+
+	rate = clk_get_rate(tc->refclk);
+	switch (rate) {
+	case 38400000:
+		value = REF_FREQ_38M4;
+		break;
+	case 26000000:
+		value = REF_FREQ_26M;
+		break;
+	case 19200000:
+		value = REF_FREQ_19M2;
+		break;
+	case 13000000:
+		value = REF_FREQ_13M;
+		break;
+	default:
+		dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
+		return -EINVAL;
+	}
+
+	/* Setup DP-PHY / PLL */
+	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+	tc_write(SYS_PLLPARAM, value);
+
+	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN);
+
+	/*
+	 * Initially PLLs are in bypass. Force PLL parameter update,
+	 * disable PLL bypass, enable PLL
+	 */
+	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	ret = tc_poll_timeout(tc->regmap, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1,
+			      1000);
+	if (ret == -ETIMEDOUT) {
+		dev_err(tc->dev, "Timeout waiting for PHY to become ready");
+		return ret;
+	} else if (ret)
+		goto err;
+
+	/* Setup AUX link */
+	tc_write(DP0_AUXCFG1, AUX_RX_FILTER_EN |
+		 (0x06 << 8) |	/* Aux Bit Period Calculator Threshold */
+		 (0x3f << 0));	/* Aux Response Timeout Timer */
+
+	return 0;
+err:
+	dev_err(tc->dev, "tc_aux_link_setup failed: %d\n", ret);
+	return ret;
+}
+
+static int tc_get_display_props(struct tc_data *tc)
+{
+	int ret;
+	/* temp buffer */
+	u8 tmp[8];
+
+	/* Read DP Rx Link Capability */
+	ret = drm_dp_link_probe(&tc->aux, &tc->link.base);
+	if (ret < 0)
+		goto err_dpcd_read;
+	if ((tc->link.base.rate != 162000) && (tc->link.base.rate != 270000))
+		goto err_dpcd_inval;
+
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.spread = tmp[0] & BIT(0); /* 0.5% down spread */
+
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAIN_LINK_CHANNEL_CODING, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.coding8b10b = tmp[0] & BIT(0);
+	tc->link.scrambler_dis = 0;
+	/* read assr */
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_EDP_CONFIGURATION_SET, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.assr = tmp[0] & DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
+
+	dev_dbg(tc->dev, "DPCD rev: %d.%d, rate: %s, lanes: %d, framing: %s\n",
+		tc->link.base.revision >> 4, tc->link.base.revision & 0x0f,
+		(tc->link.base.rate == 162000) ? "1.62Gbps" : "2.7Gbps",
+		tc->link.base.num_lanes,
+		(tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING) ?
+		"enhanced" : "non-enhanced");
+	dev_dbg(tc->dev, "ANSI 8B/10B: %d\n", tc->link.coding8b10b);
+	dev_dbg(tc->dev, "Display ASSR: %d, TC358767 ASSR: %d\n",
+		tc->link.assr, tc->assr);
+
+	return 0;
+
+err_dpcd_read:
+	dev_err(tc->dev, "failed to read DPCD: %d\n", ret);
+	return ret;
+err_dpcd_inval:
+	dev_err(tc->dev, "invalid DPCD\n");
+	return -EINVAL;
+}
+
+static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
+{
+	int ret;
+	int vid_sync_dly;
+	int max_tu_symbol;
+
+	int left_margin = mode->htotal - mode->hsync_end;
+	int right_margin = mode->hsync_start - mode->hdisplay;
+	int hsync_len = mode->hsync_end - mode->hsync_start;
+	int upper_margin = mode->vtotal - mode->vsync_end;
+	int lower_margin = mode->vsync_start - mode->vdisplay;
+	int vsync_len = mode->vsync_end - mode->vsync_start;
+
+	dev_dbg(tc->dev, "set mode %dx%d\n",
+		mode->hdisplay, mode->vdisplay);
+	dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
+		left_margin, right_margin, hsync_len);
+	dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
+		upper_margin, lower_margin, vsync_len);
+	dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
+
+
+	/* LCD Ctl Frame Size */
+	tc_write(VPCTRL0, (0x40 << 20) /* VSDELAY */ |
+		 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
+	tc_write(HTIM01, (left_margin << 16) |		/* H back porch */
+			 (hsync_len << 0));		/* Hsync */
+	tc_write(HTIM02, (right_margin << 16) |		/* H front porch */
+			 (mode->hdisplay << 0));	/* width */
+	tc_write(VTIM01, (upper_margin << 16) |		/* V back porch */
+			 (vsync_len << 0));		/* Vsync */
+	tc_write(VTIM02, (lower_margin << 16) |		/* V front porch */
+			 (mode->vdisplay << 0));	/* height */
+	tc_write(VFUEN0, VFUEN);		/* update settings */
+
+	/* Test pattern settings */
+	tc_write(TSTCTL,
+		 (120 << 24) |	/* Red Color component value */
+		 (20 << 16) |	/* Green Color component value */
+		 (99 << 8) |	/* Blue Color component value */
+		 (1 << 4) |	/* Enable I2C Filter */
+		 (2 << 0) |	/* Color bar Mode */
+		 0);
+
+	/* DP Main Stream Attributes */
+	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
+	tc_write(DP0_VIDSYNCDELAY,
+		 (0x003e << 16) |	/* thresh_dly */
+		 (vid_sync_dly << 0));
+
+	tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
+
+	tc_write(DP0_STARTVAL,
+		 ((upper_margin + vsync_len) << 16) |
+		 ((left_margin + hsync_len) << 0));
+
+	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
+
+	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
+
+	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
+		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
+
+	/*
+	 * Recommended maximum number of symbols transferred in a transfer unit:
+	 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
+	 *              (output active video bandwidth in bytes))
+	 * Must be less than tu_size.
+	 */
+	max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
+	tc_write(DP0_MISC, (max_tu_symbol << 23) | TU_SIZE_RECOMMENDED | BPC_8);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_link_training(struct tc_data *tc, int pattern)
+{
+	const char * const *errors;
+	u32 srcctrl = tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
+		      DP0_SRCCTRL_AUTOCORRECT;
+	int timeout;
+	int retry;
+	u32 value;
+	int ret;
+
+	if (pattern == DP_TRAINING_PATTERN_1) {
+		srcctrl |= DP0_SRCCTRL_TP1;
+		errors = training_pattern1_errors;
+	} else {
+		srcctrl |= DP0_SRCCTRL_TP2;
+		errors = training_pattern2_errors;
+	}
+
+	/* Set DPCD 0x102 for Training Part 1 or 2 */
+	tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE | pattern);
+
+	tc_write(DP0_LTLOOPCTRL,
+		 (0x0f << 28) |	/* Defer Iteration Count */
+		 (0x0f << 24) |	/* Loop Iteration Count */
+		 (0x0d << 0));	/* Loop Timer Delay */
+
+	retry = 5;
+	do {
+		/* Set DP0 Training Pattern */
+		tc_write(DP0_SRCCTRL, srcctrl);
+
+		/* Enable DP0 to start Link Training */
+		tc_write(DP0CTL, DP_EN);
+
+		/* wait */
+		timeout = 1000;
+		do {
+			tc_read(DP0_LTSTAT, &value);
+			udelay(1);
+		} while ((!(value & LT_LOOPDONE)) && (--timeout));
+		if (timeout == 0) {
+			dev_err(tc->dev, "Link training timeout!\n");
+		} else {
+			int pattern = (value >> 11) & 0x3;
+			int error = (value >> 8) & 0x7;
+
+			dev_dbg(tc->dev,
+				"Link training phase %d done after %d uS: %s\n",
+				pattern, 1000 - timeout, errors[error]);
+			if (pattern == DP_TRAINING_PATTERN_1 && error == 0)
+				break;
+			if (pattern == DP_TRAINING_PATTERN_2) {
+				value &= LT_CHANNEL1_EQ_BITS |
+					 LT_INTERLANE_ALIGN_DONE |
+					 LT_CHANNEL0_EQ_BITS;
+				/* in case of two lanes */
+				if ((tc->link.base.num_lanes == 2) &&
+				    (value == (LT_CHANNEL1_EQ_BITS |
+					       LT_INTERLANE_ALIGN_DONE |
+					       LT_CHANNEL0_EQ_BITS)))
+					break;
+				/* in case of one line */
+				if ((tc->link.base.num_lanes == 1) &&
+				    (value == (LT_INTERLANE_ALIGN_DONE |
+					       LT_CHANNEL0_EQ_BITS)))
+					break;
+			}
+		}
+		/* restart */
+		tc_write(DP0CTL, 0);
+		usleep_range(10, 20);
+	} while (--retry);
+	if (retry == 0) {
+		dev_err(tc->dev, "Failed to finish training phase %d\n",
+			pattern);
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_main_link_setup(struct tc_data *tc)
+{
+	struct drm_dp_aux *aux = &tc->aux;
+	struct device *dev = tc->dev;
+	unsigned int rate;
+	u32 dp_phy_ctrl;
+	int timeout;
+	bool aligned;
+	bool ready;
+	u32 value;
+	int ret;
+	u8 tmp[8];
+
+	/* display mode should be set at this point */
+	if (!tc->mode)
+		return -EINVAL;
+
+	/* from excel file - DP0_SrcCtrl */
+	tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B |
+		 DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
+		 DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
+	/* from excel file - DP1_SrcCtrl */
+	tc_write(0x07a0, 0x00003083);
+
+	rate = clk_get_rate(tc->refclk);
+	switch (rate) {
+	case 38400000:
+		value = REF_FREQ_38M4;
+		break;
+	case 26000000:
+		value = REF_FREQ_26M;
+		break;
+	case 19200000:
+		value = REF_FREQ_19M2;
+		break;
+	case 13000000:
+		value = REF_FREQ_13M;
+		break;
+	default:
+		return -EINVAL;
+	}
+	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+	tc_write(SYS_PLLPARAM, value);
+	/* Setup Main Link */
+	dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN |  PHY_M0_EN;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	msleep(100);
+
+	/* PLL setup */
+	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	/* PXL PLL setup */
+	if (tc_test_pattern) {
+		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
+				    1000 * tc->mode->clock);
+		if (ret)
+			goto err;
+	}
+
+	/* Reset/Enable Main Links */
+	dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	usleep_range(100, 200);
+	dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+
+	timeout = 1000;
+	do {
+		tc_read(DP_PHY_CTRL, &value);
+		udelay(1);
+	} while ((!(value & PHY_RDY)) && (--timeout));
+
+	if (timeout == 0) {
+		dev_err(dev, "timeout waiting for phy become ready");
+		return -ETIMEDOUT;
+	}
+
+	/* Set misc: 8 bits per color */
+	ret = regmap_update_bits(tc->regmap, DP0_MISC, BPC_8, BPC_8);
+	if (ret)
+		goto err;
+
+	/*
+	 * ASSR mode
+	 * on TC358767 side ASSR configured through strap pin
+	 * seems there is no way to change this setting from SW
+	 *
+	 * check is tc configured for same mode
+	 */
+	if (tc->assr != tc->link.assr) {
+		dev_dbg(dev, "Trying to set display to ASSR: %d\n",
+			tc->assr);
+		/* try to set ASSR on display side */
+		tmp[0] = tc->assr;
+		ret = drm_dp_dpcd_writeb(aux, DP_EDP_CONFIGURATION_SET, tmp[0]);
+		if (ret < 0)
+			goto err_dpcd_read;
+		/* read back */
+		ret = drm_dp_dpcd_readb(aux, DP_EDP_CONFIGURATION_SET, tmp);
+		if (ret < 0)
+			goto err_dpcd_read;
+
+		if (tmp[0] != tc->assr) {
+			dev_warn(dev, "Failed to switch display ASSR to %d, falling back to unscrambled mode\n",
+				 tc->assr);
+			/* trying with disabled scrambler */
+			tc->link.scrambler_dis = 1;
+		}
+	}
+
+	/* Setup Link & DPRx Config for Training */
+	ret = drm_dp_link_configure(aux, &tc->link.base);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	/* DOWNSPREAD_CTRL */
+	tmp[0] = tc->link.spread ? DP_SPREAD_AMP_0_5 : 0x00;
+	/* MAIN_LINK_CHANNEL_CODING_SET */
+	tmp[1] =  tc->link.coding8b10b ? DP_SET_ANSI_8B10B : 0x00;
+	ret = drm_dp_dpcd_write(aux, DP_DOWNSPREAD_CTRL, tmp, 2);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	ret = tc_link_training(tc, DP_TRAINING_PATTERN_1);
+	if (ret)
+		goto err;
+
+	ret = tc_link_training(tc, DP_TRAINING_PATTERN_2);
+	if (ret)
+		goto err;
+
+	/* Clear DPCD 0x102 */
+	/* Note: Can Not use DP0_SNKLTCTRL (0x06E4) short cut */
+	tmp[0] = tc->link.scrambler_dis ? DP_LINK_SCRAMBLING_DISABLE : 0x00;
+	ret = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET, tmp[0]);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	/* Clear Training Pattern, set AutoCorrect Mode = 1 */
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_AUTOCORRECT);
+
+	/* Wait */
+	timeout = 100;
+	do {
+		udelay(1);
+		/* Read DPCD 0x202-0x207 */
+		ret = drm_dp_dpcd_read_link_status(aux, tmp + 2);
+		if (ret < 0)
+			goto err_dpcd_read;
+		ready = (tmp[2] == ((DP_CHANNEL_EQ_BITS << 4) | /* Lane1 */
+				     DP_CHANNEL_EQ_BITS));      /* Lane0 */
+		aligned = tmp[4] & DP_INTERLANE_ALIGN_DONE;
+	} while ((--timeout) && !(ready && aligned));
+
+	if (timeout == 0) {
+		/* Read DPCD 0x200-0x201 */
+		ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT, tmp, 2);
+		if (ret < 0)
+			goto err_dpcd_read;
+		dev_info(dev, "0x0200 SINK_COUNT: 0x%02x\n", tmp[0]);
+		dev_info(dev, "0x0201 DEVICE_SERVICE_IRQ_VECTOR: 0x%02x\n",
+			 tmp[1]);
+		dev_info(dev, "0x0202 LANE0_1_STATUS: 0x%02x\n", tmp[2]);
+		dev_info(dev, "0x0204 LANE_ALIGN_STATUS_UPDATED: 0x%02x\n",
+			 tmp[4]);
+		dev_info(dev, "0x0205 SINK_STATUS: 0x%02x\n", tmp[5]);
+		dev_info(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
+			 tmp[6]);
+
+		if (!ready)
+			dev_err(dev, "Lane0/1 not ready\n");
+		if (!aligned)
+			dev_err(dev, "Lane0/1 not aligned\n");
+		return -EAGAIN;
+	}
+
+	ret = tc_set_video_mode(tc, tc->mode);
+	if (ret)
+		goto err;
+
+	/* Set M/N */
+	ret = tc_stream_clock_calc(tc);
+	if (ret)
+		goto err;
+
+	return 0;
+err_dpcd_read:
+	dev_err(tc->dev, "Failed to read DPCD: %d\n", ret);
+	return ret;
+err_dpcd_write:
+	dev_err(tc->dev, "Failed to write DPCD: %d\n", ret);
+err:
+	return ret;
+}
+
+static int tc_main_link_stream(struct tc_data *tc, int state)
+{
+	int ret;
+	u32 value;
+
+	dev_dbg(tc->dev, "stream: %d\n", state);
+
+	if (state) {
+		value = VID_MN_GEN | DP_EN;
+		if (tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
+			value |= EF_EN;
+		tc_write(DP0CTL, value);
+		/*
+		 * VID_EN assertion should be delayed by at least N * LSCLK
+		 * cycles from the time VID_MN_GEN is enabled in order to
+		 * generate stable values for VID_M. LSCLK is 270 MHz or
+		 * 162 MHz, VID_N is set to 32768 in  tc_stream_clock_calc(),
+		 * so a delay of at least 203 us should suffice.
+		 */
+		usleep_range(500, 1000);
+		value |= VID_EN;
+		tc_write(DP0CTL, value);
+		/* Set input interface */
+		value = DP0_AUDSRC_NO_INPUT;
+		if (tc_test_pattern)
+			value |= DP0_VIDSRC_COLOR_BAR;
+		else
+			value |= DP0_VIDSRC_DPI_RX;
+		tc_write(SYSCTRL, value);
+	} else {
+		tc_write(DP0CTL, 0);
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static enum drm_connector_status
+tc_connector_detect(struct drm_connector *connector, bool force)
+{
+	return connector_status_connected;
+}
+
+static void tc_bridge_pre_enable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	drm_panel_prepare(tc->panel);
+}
+
+static void tc_bridge_enable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+	int ret;
+
+	ret = tc_main_link_setup(tc);
+	if (ret < 0) {
+		dev_err(tc->dev, "main link setup error: %d\n", ret);
+		return;
+	}
+
+	ret = tc_main_link_stream(tc, 1);
+	if (ret < 0) {
+		dev_err(tc->dev, "main link stream start error: %d\n", ret);
+		return;
+	}
+
+	drm_panel_enable(tc->panel);
+}
+
+static void tc_bridge_disable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+	int ret;
+
+	drm_panel_disable(tc->panel);
+
+	ret = tc_main_link_stream(tc, 0);
+	if (ret < 0)
+		dev_err(tc->dev, "main link stream stop error: %d\n", ret);
+}
+
+static void tc_bridge_post_disable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	drm_panel_unprepare(tc->panel);
+}
+
+static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adj)
+{
+	/* Fixup sync polarities, both hsync and vsync are active low */
+	adj->flags = mode->flags;
+	adj->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+	adj->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+
+	return true;
+}
+
+static int tc_connector_mode_valid(struct drm_connector *connector,
+				   struct drm_display_mode *mode)
+{
+	/* Accept any mode */
+	return MODE_OK;
+}
+
+static void tc_bridge_mode_set(struct drm_bridge *bridge,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adj)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	tc->mode = mode;
+}
+
+static int tc_connector_get_modes(struct drm_connector *connector)
+{
+	struct tc_data *tc = connector_to_tc(connector);
+	struct edid *edid;
+	unsigned int count;
+
+	if (tc->panel && tc->panel->funcs && tc->panel->funcs->get_modes) {
+		count = tc->panel->funcs->get_modes(tc->panel);
+		if (count > 0)
+			return count;
+	}
+
+	edid = drm_get_edid(connector, &tc->aux.ddc);
+
+	kfree(tc->edid);
+	tc->edid = edid;
+	if (!edid)
+		return 0;
+
+	drm_mode_connector_update_edid_property(connector, edid);
+	count = drm_add_edid_modes(connector, edid);
+
+	return count;
+}
+
+static void tc_connector_set_polling(struct tc_data *tc,
+				     struct drm_connector *connector)
+{
+	/* TODO: add support for HPD */
+	connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+			    DRM_CONNECTOR_POLL_DISCONNECT;
+}
+
+static struct drm_encoder *
+tc_connector_best_encoder(struct drm_connector *connector)
+{
+	struct tc_data *tc = connector_to_tc(connector);
+
+	return tc->bridge.encoder;
+}
+
+static const struct drm_connector_helper_funcs tc_connector_helper_funcs = {
+	.get_modes = tc_connector_get_modes,
+	.mode_valid = tc_connector_mode_valid,
+	.best_encoder = tc_connector_best_encoder,
+};
+
+static void tc_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs tc_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = tc_connector_detect,
+	.destroy = tc_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int tc_bridge_attach(struct drm_bridge *bridge)
+{
+	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	struct tc_data *tc = bridge_to_tc(bridge);
+	struct drm_device *drm = bridge->dev;
+	int ret;
+
+	/* Create eDP connector */
+	drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
+	ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
+				 DRM_MODE_CONNECTOR_eDP);
+	if (ret)
+		return ret;
+
+	if (tc->panel)
+		drm_panel_attach(tc->panel, &tc->connector);
+
+	drm_display_info_set_bus_formats(&tc->connector.display_info,
+					 &bus_format, 1);
+	drm_mode_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs tc_bridge_funcs = {
+	.attach = tc_bridge_attach,
+	.mode_set = tc_bridge_mode_set,
+	.pre_enable = tc_bridge_pre_enable,
+	.enable = tc_bridge_enable,
+	.disable = tc_bridge_disable,
+	.post_disable = tc_bridge_post_disable,
+	.mode_fixup = tc_bridge_mode_fixup,
+};
+
+static bool tc_readable_reg(struct device *dev, unsigned int reg)
+{
+	return reg != SYSCTRL;
+}
+
+static const struct regmap_range tc_volatile_ranges[] = {
+	regmap_reg_range(DP0_AUXWDATA(0), DP0_AUXSTATUS),
+	regmap_reg_range(DP0_LTSTAT, DP0_SNKLTCHGREQ),
+	regmap_reg_range(DP_PHY_CTRL, DP_PHY_CTRL),
+	regmap_reg_range(DP0_PLLCTRL, PXL_PLLCTRL),
+	regmap_reg_range(VFUEN0, VFUEN0),
+};
+
+static const struct regmap_access_table tc_volatile_table = {
+	.yes_ranges = tc_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(tc_volatile_ranges),
+};
+
+static bool tc_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return (reg != TC_IDREG) &&
+	       (reg != DP0_LTSTAT) &&
+	       (reg != DP0_SNKLTCHGREQ);
+}
+
+static const struct regmap_config tc_regmap_config = {
+	.name = "tc358767",
+	.reg_bits = 16,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PLL_DBG,
+	.cache_type = REGCACHE_RBTREE,
+	.readable_reg = tc_readable_reg,
+	.volatile_table = &tc_volatile_table,
+	.writeable_reg = tc_writeable_reg,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *ep;
+	struct tc_data *tc;
+	int ret;
+
+	tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
+	if (!tc)
+		return -ENOMEM;
+
+	tc->dev = dev;
+
+	/* port@2 is the output port */
+	ep = of_graph_get_endpoint_by_regs(dev->of_node, 2, -1);
+	if (ep) {
+		struct device_node *remote;
+
+		remote = of_graph_get_remote_port_parent(ep);
+		if (!remote) {
+			dev_warn(dev, "endpoint %s not connected\n",
+				 ep->full_name);
+			of_node_put(ep);
+			return -ENODEV;
+		}
+		of_node_put(ep);
+		tc->panel = of_drm_find_panel(remote);
+		if (tc->panel) {
+			dev_dbg(dev, "found panel %s\n", remote->full_name);
+		} else {
+			dev_dbg(dev, "waiting for panel %s\n",
+				remote->full_name);
+			of_node_put(remote);
+			return -EPROBE_DEFER;
+		}
+		of_node_put(remote);
+	}
+
+	/* Shut down GPIO is optional */
+	tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
+	if (IS_ERR(tc->sd_gpio))
+		return PTR_ERR(tc->sd_gpio);
+
+	if (tc->sd_gpio) {
+		gpiod_set_value_cansleep(tc->sd_gpio, 0);
+		usleep_range(5000, 10000);
+	}
+
+	/* Reset GPIO is optional */
+	tc->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(tc->reset_gpio))
+		return PTR_ERR(tc->reset_gpio);
+
+	if (tc->reset_gpio) {
+		gpiod_set_value_cansleep(tc->reset_gpio, 1);
+		usleep_range(5000, 10000);
+	}
+
+	tc->refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(tc->refclk)) {
+		ret = PTR_ERR(tc->refclk);
+		dev_err(dev, "Failed to get refclk: %d\n", ret);
+		return ret;
+	}
+
+	tc->regmap = devm_regmap_init_i2c(client, &tc_regmap_config);
+	if (IS_ERR(tc->regmap)) {
+		ret = PTR_ERR(tc->regmap);
+		dev_err(dev, "Failed to initialize regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(tc->regmap, TC_IDREG, &tc->rev);
+	if (ret) {
+		dev_err(tc->dev, "can not read device ID: %d\n", ret);
+		return ret;
+	}
+
+	if ((tc->rev != 0x6601) && (tc->rev != 0x6603)) {
+		dev_err(tc->dev, "invalid device ID: 0x%08x\n", tc->rev);
+		return -EINVAL;
+	}
+
+	tc->assr = (tc->rev == 0x6601); /* Enable ASSR for eDP panels */
+
+	ret = tc_aux_link_setup(tc);
+	if (ret)
+		return ret;
+
+	/* Register DP AUX channel */
+	tc->aux.name = "TC358767 AUX i2c adapter";
+	tc->aux.dev = tc->dev;
+	tc->aux.transfer = tc_aux_transfer;
+	ret = drm_dp_aux_register(&tc->aux);
+	if (ret)
+		return ret;
+
+	ret = tc_get_display_props(tc);
+	if (ret)
+		goto err_unregister_aux;
+
+	tc_connector_set_polling(tc, &tc->connector);
+
+	tc->bridge.funcs = &tc_bridge_funcs;
+	tc->bridge.of_node = dev->of_node;
+	ret = drm_bridge_add(&tc->bridge);
+	if (ret) {
+		dev_err(dev, "Failed to add drm_bridge: %d\n", ret);
+		goto err_unregister_aux;
+	}
+
+	i2c_set_clientdata(client, tc);
+
+	return 0;
+err_unregister_aux:
+	drm_dp_aux_unregister(&tc->aux);
+	return ret;
+}
+
+static int tc_remove(struct i2c_client *client)
+{
+	struct tc_data *tc = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&tc->bridge);
+	drm_dp_aux_unregister(&tc->aux);
+
+	tc_pxl_pll_dis(tc);
+
+	return 0;
+}
+
+static const struct i2c_device_id tc358767_i2c_ids[] = {
+	{ "tc358767", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tc358767_i2c_ids);
+
+static const struct of_device_id tc358767_of_ids[] = {
+	{ .compatible = "toshiba,tc358767", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tc358767_of_ids);
+
+static struct i2c_driver tc358767_driver = {
+	.driver = {
+		.name = "tc358767",
+		.of_match_table = tc358767_of_ids,
+	},
+	.id_table = tc358767_i2c_ids,
+	.probe = tc_probe,
+	.remove	= tc_remove,
+};
+module_i2c_driver(tc358767_driver);
+
+MODULE_AUTHOR("Andrey Gusakov <andrey.gusakov@cogentembedded.com>");
+MODULE_DESCRIPTION("tc358767 eDP encoder driver");
+MODULE_LICENSE("GPL");
author	Linus Torvalds <torvalds@linux-foundation.org>	2016-08-02 03:44:08 +0200
committer	Linus Torvalds <torvalds@linux-foundation.org>	2016-08-02 03:44:08 +0200
commit	731c7d3a205ba89b475b2aa71b5f13dd6ae3de56 (patch)
tree	d2b9c3e0a98b94dfc3e4e60e35622c0143ef4ed4 /drivers/gpu/drm/bridge
parent	clocksource/drivers/clps_711x: fixup for "ARM: clps711x: (diff)
parent	Merge branch 'linux-4.8' of git://github.com/skeggsb/linux into drm-next (diff)
download	linux-731c7d3a205ba89b475b2aa71b5f13dd6ae3de56.tar.xz linux-731c7d3a205ba89b475b2aa71b5f13dd6ae3de56.zip