i2c: designware: Convert driver to using regmap API

Seeing the DW I2C driver is using flags-based accessors with two
conditional clauses it would be better to replace them with the regmap
API IO methods and to initialize the regmap object with read/write
callbacks specific to the controller registers map implementation. This
will be also handy for the drivers with non-standard registers mapping
(like an embedded into the Baikal-T1 System Controller DW I2C block, which
glue-driver is a part of this series).

As before the driver tries to detect the mapping setup at probe stage and
creates a regmap object accordingly, which will be used by the rest of the
code to correctly access the controller registers. In two places it was
appropriate to convert the hand-written read-modify-write and
read-poll-loop design patterns to the corresponding regmap API
ready-to-use methods.

Note the regmap IO methods return value is checked only at the probe
stage. The rest of the code won't do this because basically we have
MMIO-based regmap so non of the read/write methods can fail (this also
won't be needed for the Baikal-T1-specific I2C controller).

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[wsa: fix type of 'rx_valid' and remove outdated kdoc var description]
Signed-off-by: Wolfram Sang <wsa@kernel.org>

1 files changed, 10 insertions, 12 deletions

diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index b9ef9b0deef0..f5bbe3d6bcf8 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -15,6 +15,7 @@
 #include <linux/dev_printk.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
+#include <linux/regmap.h>
 #include <linux/types.h>
 
 #define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C |			\
@@ -126,8 +127,6 @@
 #define STATUS_WRITE_IN_PROGRESS	0x1
 #define STATUS_READ_IN_PROGRESS		0x2
 
-#define TIMEOUT			20 /* ms */
-
 /*
  * operation modes
  */
@@ -183,7 +182,9 @@ struct reset_control;
 /**
  * struct dw_i2c_dev - private i2c-designware data
  * @dev: driver model device node
+ * @map: IO registers map
  * @base: IO registers pointer
+ * @ext: Extended IO registers pointer
  * @cmd_complete: tx completion indicator
  * @clk: input reference clock
  * @pclk: clock required to access the registers
@@ -233,6 +234,7 @@ struct reset_control;
  */
 struct dw_i2c_dev {
 	struct device		*dev;
+	struct regmap		*map;
 	void __iomem		*base;
 	void __iomem		*ext;
 	struct completion	cmd_complete;
@@ -284,17 +286,13 @@ struct dw_i2c_dev {
 	bool			suspended;
 };
 
-#define ACCESS_SWAP		0x00000001
-#define ACCESS_16BIT		0x00000002
-#define ACCESS_INTR_MASK	0x00000004
-#define ACCESS_NO_IRQ_SUSPEND	0x00000008
+#define ACCESS_INTR_MASK	0x00000001
+#define ACCESS_NO_IRQ_SUSPEND	0x00000002
 
 #define MODEL_MSCC_OCELOT	0x00000100
 #define MODEL_MASK		0x00000f00
 
-u32 dw_readl(struct dw_i2c_dev *dev, int offset);
-void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
-int i2c_dw_set_reg_access(struct dw_i2c_dev *dev);
+int i2c_dw_init_regmap(struct dw_i2c_dev *dev);
 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
 int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev);
@@ -304,19 +302,19 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
 void i2c_dw_release_lock(struct dw_i2c_dev *dev);
 int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
 int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
-void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev);
+int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev);
 u32 i2c_dw_func(struct i2c_adapter *adap);
 void i2c_dw_disable(struct dw_i2c_dev *dev);
 void i2c_dw_disable_int(struct dw_i2c_dev *dev);
 
 static inline void __i2c_dw_enable(struct dw_i2c_dev *dev)
 {
-	dw_writel(dev, 1, DW_IC_ENABLE);
+	regmap_write(dev->map, DW_IC_ENABLE, 1);
 }
 
 static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
 {
-	dw_writel(dev, 0, DW_IC_ENABLE);
+	regmap_write(dev->map, DW_IC_ENABLE, 0);
 }
 
 void __i2c_dw_disable(struct dw_i2c_dev *dev);