Merge 4.8-rc5 into staging-next

We want the staging fixes in here as well to handle merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

18 files changed, 119 insertions, 51 deletions

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 5630f2316c58..13b8a18785de 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -20,6 +20,8 @@ config BMA180
 config BMA220
     tristate "Bosch BMA220 3-Axis Accelerometer Driver"
 	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
     help
       Say yes here to add support for the Bosch BMA220 triaxial
       acceleration sensor.
@@ -255,7 +257,8 @@ config STK8312
 config STK8BA50
 	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
 	depends on I2C
-	depends on IIO_TRIGGER
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to get support for the Sensortek STK8BA50 3-axis
 	  accelerometer.
diff --git a/drivers/iio/accel/bma220_spi.c b/drivers/iio/accel/bma220_spi.c
index 1098d10df8e8..5099f295dd37 100644
--- a/drivers/iio/accel/bma220_spi.c
+++ b/drivers/iio/accel/bma220_spi.c
@@ -253,7 +253,7 @@ static int bma220_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
 					 bma220_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&spi->dev, "iio triggered buffer setup failed\n");
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index 3a9f106787d2..da5fb67ecb34 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -160,6 +160,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto error_ret;
 		*val = ret;
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index e4022fd89393..586830ec8800 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -402,6 +402,7 @@ config QCOM_SPMI_VADC
 config ROCKCHIP_SARADC
 	tristate "Rockchip SARADC driver"
 	depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
+	depends on RESET_CONTROLLER
 	help
 	  Say yes here to build support for the SARADC found in SoCs from
 	  Rockchip.
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index b6163764489c..9704090b7908 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -527,6 +527,7 @@ static struct attribute_group ad799x_event_attrs_group = {
 static const struct iio_info ad7991_info = {
 	.read_raw = &ad799x_read_raw,
 	.driver_module = THIS_MODULE,
+	.update_scan_mode = ad799x_update_scan_mode,
 };
 
 static const struct iio_info ad7993_4_7_8_noirq_info = {
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 52430ba171f3..0438c68015e8 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
 		st->ts_bufferedmeasure = false;
 		input_report_key(st->ts_input, BTN_TOUCH, 0);
 		input_sync(st->ts_input);
-	} else if (status & AT91_ADC_EOC(3)) {
-		/* Conversion finished */
+	} else if (status & AT91_ADC_EOC(3) && st->ts_input) {
+		/* Conversion finished and we've a touchscreen */
 		if (st->ts_bufferedmeasure) {
 			/*
 			 * Last measurement is always discarded, since it can
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index f9ad6c2d6821..85d701291654 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -21,6 +21,8 @@
 #include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/reset.h>
 #include <linux/regulator/consumer.h>
 #include <linux/iio/iio.h>
 
@@ -53,6 +55,7 @@ struct rockchip_saradc {
 	struct clk		*clk;
 	struct completion	completion;
 	struct regulator	*vref;
+	struct reset_control	*reset;
 	const struct rockchip_saradc_data *data;
 	u16			last_val;
 };
@@ -190,6 +193,16 @@ static const struct of_device_id rockchip_saradc_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
 
+/**
+ * Reset SARADC Controller.
+ */
+static void rockchip_saradc_reset_controller(struct reset_control *reset)
+{
+	reset_control_assert(reset);
+	usleep_range(10, 20);
+	reset_control_deassert(reset);
+}
+
 static int rockchip_saradc_probe(struct platform_device *pdev)
 {
 	struct rockchip_saradc *info = NULL;
@@ -218,6 +231,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 
+	/*
+	 * The reset should be an optional property, as it should work
+	 * with old devicetrees as well
+	 */
+	info->reset = devm_reset_control_get(&pdev->dev, "saradc-apb");
+	if (IS_ERR(info->reset)) {
+		ret = PTR_ERR(info->reset);
+		if (ret != -ENOENT)
+			return ret;
+
+		dev_dbg(&pdev->dev, "no reset control found\n");
+		info->reset = NULL;
+	}
+
 	init_completion(&info->completion);
 
 	irq = platform_get_irq(pdev, 0);
@@ -252,6 +279,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
 		return PTR_ERR(info->vref);
 	}
 
+	if (info->reset)
+		rockchip_saradc_reset_controller(info->reset);
+
 	/*
 	 * Use a default value for the converter clock.
 	 * This may become user-configurable in the future.
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 1ef398770a1f..066abaf80201 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -489,7 +489,8 @@ static struct iio_info ads1115_info = {
 #ifdef CONFIG_OF
 static int ads1015_get_channels_config_of(struct i2c_client *client)
 {
-	struct ads1015_data *data = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ads1015_data *data = iio_priv(indio_dev);
 	struct device_node *node;
 
 	if (!client->dev.of_node ||
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 8a368756881b..c3cfacca2541 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -32,6 +32,7 @@
 
 struct tiadc_device {
 	struct ti_tscadc_dev *mfd_tscadc;
+	struct mutex fifo1_lock; /* to protect fifo access */
 	int channels;
 	u8 channel_line[8];
 	u8 channel_step[8];
@@ -359,6 +360,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		int *val, int *val2, long mask)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	int ret = IIO_VAL_INT;
 	int i, map_val;
 	unsigned int fifo1count, read, stepid;
 	bool found = false;
@@ -372,13 +374,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	if (!step_en)
 		return -EINVAL;
 
+	mutex_lock(&adc_dev->fifo1_lock);
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	while (fifo1count--)
 		tiadc_readl(adc_dev, REG_FIFO1);
 
 	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	timeout = jiffies + usecs_to_jiffies
+	timeout = jiffies + msecs_to_jiffies
 				(IDLE_TIMEOUT * adc_dev->channels);
 	/* Wait for Fifo threshold interrupt */
 	while (1) {
@@ -388,7 +391,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 
 		if (time_after(jiffies, timeout)) {
 			am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
-			return -EAGAIN;
+			ret = -EAGAIN;
+			goto err_unlock;
 		}
 	}
 	map_val = adc_dev->channel_step[chan->scan_index];
@@ -414,8 +418,11 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (found == false)
-		return -EBUSY;
-	return IIO_VAL_INT;
+		ret =  -EBUSY;
+
+err_unlock:
+	mutex_unlock(&adc_dev->fifo1_lock);
+	return ret;
 }
 
 static const struct iio_info tiadc_info = {
@@ -483,6 +490,7 @@ static int tiadc_probe(struct platform_device *pdev)
 
 	tiadc_step_config(indio_dev);
 	tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
+	mutex_init(&adc_dev->fifo1_lock);
 
 	err = tiadc_channel_init(indio_dev, adc_dev->channels);
 	if (err < 0)
diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
index 84fbff32b96d..bd321b305a0a 100644
--- a/drivers/iio/chemical/atlas-ph-sensor.c
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
@@ -461,7 +461,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 			break;
 		case IIO_ELECTRICALCONDUCTIVITY:
 			*val = 1; /* 0.00001 */
-			*val = 100000;
+			*val2 = 100000;
 			break;
 		case IIO_CONCENTRATION:
 			*val = 0; /* 0.000000001 */
diff --git a/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c
index 792a97164cb2..bebbd00304ce 100644
--- a/drivers/iio/dac/stx104.c
+++ b/drivers/iio/dac/stx104.c
@@ -65,6 +65,16 @@ struct stx104_gpio {
 	unsigned int out_state;
 };
 
+/**
+ * struct stx104_dev - STX104 device private data structure
+ * @indio_dev:	IIO device
+ * @chip:	instance of the gpio_chip
+ */
+struct stx104_dev {
+	struct iio_dev *indio_dev;
+	struct gpio_chip *chip;
+};
+
 static int stx104_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
 {
@@ -107,6 +117,7 @@ static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = {
 static int stx104_gpio_get_direction(struct gpio_chip *chip,
 	unsigned int offset)
 {
+	/* GPIO 0-3 are input only, while the rest are output only */
 	if (offset < 4)
 		return 1;
 
@@ -169,6 +180,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	struct iio_dev *indio_dev;
 	struct stx104_iio *priv;
 	struct stx104_gpio *stx104gpio;
+	struct stx104_dev *stx104dev;
 	int err;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
@@ -179,6 +191,10 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	if (!stx104gpio)
 		return -ENOMEM;
 
+	stx104dev = devm_kzalloc(dev, sizeof(*stx104dev), GFP_KERNEL);
+	if (!stx104dev)
+		return -ENOMEM;
+
 	if (!devm_request_region(dev, base[id], STX104_EXTENT,
 		dev_name(dev))) {
 		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@@ -199,12 +215,6 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	outw(0, base[id] + 4);
 	outw(0, base[id] + 6);
 
-	err = devm_iio_device_register(dev, indio_dev);
-	if (err) {
-		dev_err(dev, "IIO device registering failed (%d)\n", err);
-		return err;
-	}
-
 	stx104gpio->chip.label = dev_name(dev);
 	stx104gpio->chip.parent = dev;
 	stx104gpio->chip.owner = THIS_MODULE;
@@ -220,7 +230,9 @@ static int stx104_probe(struct device *dev, unsigned int id)
 
 	spin_lock_init(&stx104gpio->lock);
 
-	dev_set_drvdata(dev, stx104gpio);
+	stx104dev->indio_dev = indio_dev;
+	stx104dev->chip = &stx104gpio->chip;
+	dev_set_drvdata(dev, stx104dev);
 
 	err = gpiochip_add_data(&stx104gpio->chip, stx104gpio);
 	if (err) {
@@ -228,14 +240,22 @@ static int stx104_probe(struct device *dev, unsigned int id)
 		return err;
 	}
 
+	err = iio_device_register(indio_dev);
+	if (err) {
+		dev_err(dev, "IIO device registering failed (%d)\n", err);
+		gpiochip_remove(&stx104gpio->chip);
+		return err;
+	}
+
 	return 0;
 }
 
 static int stx104_remove(struct device *dev, unsigned int id)
 {
-	struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev);
+	struct stx104_dev *const stx104dev = dev_get_drvdata(dev);
 
-	gpiochip_remove(&stx104gpio->chip);
+	iio_device_unregister(stx104dev->indio_dev);
+	gpiochip_remove(stx104dev->chip);
 
 	return 0;
 }
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index f155386286bf..b17e2e2bd4f5 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -6,6 +6,8 @@ menu "Humidity sensors"
 config AM2315
     tristate "Aosong AM2315 relative humidity and temperature sensor"
     depends on I2C
+    select IIO_BUFFER
+    select IIO_TRIGGERED_BUFFER
     help
       If you say yes here you get support for the Aosong AM2315
       relative humidity and ambient temperature sensor.
diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c
index 3e200f69e886..ff96b6d0fdae 100644
--- a/drivers/iio/humidity/am2315.c
+++ b/drivers/iio/humidity/am2315.c
@@ -244,7 +244,7 @@ static int am2315_probe(struct i2c_client *client,
 	indio_dev->channels = am2315_channels;
 	indio_dev->num_channels = ARRAY_SIZE(am2315_channels);
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
 					 am2315_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&client->dev, "iio triggered buffer setup failed\n");
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index a03832a5fc95..e0c9c70c2a4a 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -142,7 +142,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
 	struct i2c_client *client = data->client;
 	int delay = data->adc_int_us[chan->address];
 	int ret;
-	int val;
+	__be16 val;
 
 	/* start measurement */
 	ret = i2c_smbus_write_byte(client, chan->address);
@@ -154,26 +154,13 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
 	/* wait for integration time to pass */
 	usleep_range(delay, delay + 1000);
 
-	/*
-	 * i2c_smbus_read_word_data cannot() be used here due to the command
-	 * value not being understood and causes NAKs preventing any reading
-	 * from being accessed.
-	 */
-	ret = i2c_smbus_read_byte(client);
+	/* read measurement */
+	ret = i2c_master_recv(data->client, (char *)&val, sizeof(val));
 	if (ret < 0) {
-		dev_err(&client->dev, "cannot read high byte measurement");
+		dev_err(&client->dev, "cannot read sensor data\n");
 		return ret;
 	}
-	val = ret << 8;
-
-	ret = i2c_smbus_read_byte(client);
-	if (ret < 0) {
-		dev_err(&client->dev, "cannot read low byte measurement");
-		return ret;
-	}
-	val |= ret;
-
-	return val;
+	return be16_to_cpu(val);
 }
 
 static int hdc100x_get_heater_status(struct hdc100x_data *data)
@@ -272,8 +259,8 @@ static int hdc100x_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	struct hdc100x_data *data;
 
-	if (!i2c_check_functionality(client->adapter,
-				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
+				     I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
 		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 90462fcf5436..49bf9c59f117 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -107,6 +107,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
 {
 	struct iio_dev *indio_dev = filp->private_data;
 	struct iio_buffer *rb = indio_dev->buffer;
+	DEFINE_WAIT_FUNC(wait, woken_wake_function);
 	size_t datum_size;
 	size_t to_wait;
 	int ret;
@@ -131,19 +132,29 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
 	else
 		to_wait = min_t(size_t, n / datum_size, rb->watermark);
 
+	add_wait_queue(&rb->pollq, &wait);
 	do {
-		ret = wait_event_interruptible(rb->pollq,
-		      iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size));
-		if (ret)
-			return ret;
+		if (!indio_dev->info) {
+			ret = -ENODEV;
+			break;
+		}
 
-		if (!indio_dev->info)
-			return -ENODEV;
+		if (!iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size)) {
+			if (signal_pending(current)) {
+				ret = -ERESTARTSYS;
+				break;
+			}
+
+			wait_woken(&wait, TASK_INTERRUPTIBLE,
+				   MAX_SCHEDULE_TIMEOUT);
+			continue;
+		}
 
 		ret = rb->access->read_first_n(rb, n, buf);
 		if (ret == 0 && (filp->f_flags & O_NONBLOCK))
 			ret = -EAGAIN;
 	 } while (ret == 0);
+	remove_wait_queue(&rb->pollq, &wait);
 
 	return ret;
 }
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 28217478d828..0db0a0d1bba0 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -76,7 +76,6 @@ config BH1750
 config BH1780
 	tristate "ROHM BH1780 ambient light sensor"
 	depends on I2C
-	depends on !SENSORS_BH1780
 	help
 	 Say Y here to build support for the ROHM BH1780GLI ambient
 	 light sensor.
@@ -238,6 +237,8 @@ config MAX44000
 	tristate "MAX44000 Ambient and Infrared Proximity Sensor"
 	depends on I2C
 	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	 Say Y here if you want to build support for Maxim Integrated's
 	 MAX44000 ambient and infrared proximity sensor device.
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 6943688e66df..e5a533cbd53f 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -970,7 +970,7 @@ int bmp280_common_probe(struct device *dev,
 	data->vdda = devm_regulator_get(dev, "vdda");
 	if (IS_ERR(data->vdda)) {
 		dev_err(dev, "failed to get VDDA regulator\n");
-		ret = PTR_ERR(data->vddd);
+		ret = PTR_ERR(data->vdda);
 		goto out_disable_vddd;
 	}
 	ret = regulator_enable(data->vdda);
@@ -1079,7 +1079,8 @@ EXPORT_SYMBOL(bmp280_common_remove);
 #ifdef CONFIG_PM
 static int bmp280_runtime_suspend(struct device *dev)
 {
-	struct bmp280_data *data = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmp280_data *data = iio_priv(indio_dev);
 	int ret;
 
 	ret = regulator_disable(data->vdda);
@@ -1090,7 +1091,8 @@ static int bmp280_runtime_suspend(struct device *dev)
 
 static int bmp280_runtime_resume(struct device *dev)
 {
-	struct bmp280_data *data = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmp280_data *data = iio_priv(indio_dev);
 	int ret;
 
 	ret = regulator_enable(data->vddd);
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index 2e3a70e1b245..5656deb17261 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -397,7 +397,7 @@ static int as3935_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
 		&as3935_trigger_handler, NULL);
 
 	if (ret) {