Merge branch 'next' into for-linus

44 files changed, 3675 insertions, 3496 deletions

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 07c2cd43109c..23e82e46656d 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -6,7 +6,7 @@ menu "Input device support"
 	depends on !S390
 
 config INPUT
-	tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED
+	tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT
 	default y
 	help
 	  Say Y here if you have any input device (mouse, keyboard, tablet,
@@ -67,7 +67,7 @@ config INPUT_SPARSEKMAP
 comment "Userland interfaces"
 
 config INPUT_MOUSEDEV
-	tristate "Mouse interface" if EMBEDDED
+	tristate "Mouse interface" if EXPERT
 	default y
 	help
 	  Say Y here if you want your mouse to be accessible as char devices
@@ -150,7 +150,7 @@ config INPUT_EVBUG
 	  module will be called evbug.
 
 config INPUT_APMPOWER
-	tristate "Input Power Event -> APM Bridge" if EMBEDDED
+	tristate "Input Power Event -> APM Bridge" if EXPERT
 	depends on INPUT && APM_EMULATION
 	help
 	  Say Y here if you want suspend key events to trigger a user
@@ -161,16 +161,6 @@ config INPUT_APMPOWER
 	  To compile this driver as a module, choose M here: the
 	  module will be called apm-power.
 
-config XEN_KBDDEV_FRONTEND
-	tristate "Xen virtual keyboard and mouse support"
-	depends on XEN_FBDEV_FRONTEND
-	default y
-	select XEN_XENBUS_FRONTEND
-	help
-	  This driver implements the front-end of the Xen virtual
-	  keyboard and mouse device driver.  It communicates with a back-end
-	  in another domain.
-
 comment "Input Device Drivers"
 
 source "drivers/input/keyboard/Kconfig"
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 09614ce74961..0c789490e0b3 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -24,5 +24,3 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 obj-$(CONFIG_INPUT_MISC)	+= misc/
 
 obj-$(CONFIG_INPUT_APMPOWER)	+= apm-power.o
-
-obj-$(CONFIG_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index ce57ede6e981..5b8f59d6c3e8 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -121,7 +121,7 @@ static int gameport_measure_speed(struct gameport *gameport)
 	}
 
 	gameport_close(gameport);
-	return (cpu_data(raw_smp_processor_id()).loops_per_jiffy *
+	return (this_cpu_read(cpu_info.loops_per_jiffy) *
 		(unsigned long)HZ / (1000 / 50)) / (tx < 1 ? 1 : tx);
 
 #else
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 0559e309bac9..3037842a60d8 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -192,7 +192,7 @@ static struct attribute_group input_polldev_attribute_group = {
 };
 
 /**
- * input_allocate_polled_device - allocated memory polled device
+ * input_allocate_polled_device - allocate memory for polled device
  *
  * The function allocates memory for a polled device and also
  * for an input device associated with this polled device.
@@ -239,7 +239,7 @@ EXPORT_SYMBOL(input_free_polled_device);
  * with input layer. The device should be allocated with call to
  * input_allocate_polled_device(). Callers should also set up poll()
  * method and set up capabilities (id, name, phys, bits) of the
- * corresponing input_dev structure.
+ * corresponding input_dev structure.
  */
 int input_register_polled_device(struct input_polled_dev *dev)
 {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index b8894a059f87..d6e8bd8a851c 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -26,7 +26,6 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/rcupdate.h>
-#include <linux/smp_lock.h>
 #include "input-compat.h"
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
@@ -792,22 +791,9 @@ int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke)
 	int retval;
 
 	spin_lock_irqsave(&dev->event_lock, flags);
-
-	if (dev->getkeycode) {
-		/*
-		 * Support for legacy drivers, that don't implement the new
-		 * ioctls
-		 */
-		u32 scancode = ke->index;
-
-		memcpy(ke->scancode, &scancode, sizeof(scancode));
-		ke->len = sizeof(scancode);
-		retval = dev->getkeycode(dev, scancode, &ke->keycode);
-	} else {
-		retval = dev->getkeycode_new(dev, ke);
-	}
-
+	retval = dev->getkeycode(dev, ke);
 	spin_unlock_irqrestore(&dev->event_lock, flags);
+
 	return retval;
 }
 EXPORT_SYMBOL(input_get_keycode);
@@ -832,35 +818,7 @@ int input_set_keycode(struct input_dev *dev,
 
 	spin_lock_irqsave(&dev->event_lock, flags);
 
-	if (dev->setkeycode) {
-		/*
-		 * Support for legacy drivers, that don't implement the new
-		 * ioctls
-		 */
-		unsigned int scancode;
-
-		retval = input_scancode_to_scalar(ke, &scancode);
-		if (retval)
-			goto out;
-
-		/*
-		 * We need to know the old scancode, in order to generate a
-		 * keyup effect, if the set operation happens successfully
-		 */
-		if (!dev->getkeycode) {
-			retval = -EINVAL;
-			goto out;
-		}
-
-		retval = dev->getkeycode(dev, scancode, &old_keycode);
-		if (retval)
-			goto out;
-
-		retval = dev->setkeycode(dev, scancode, ke->keycode);
-	} else {
-		retval = dev->setkeycode_new(dev, ke, &old_keycode);
-	}
-
+	retval = dev->setkeycode(dev, ke, &old_keycode);
 	if (retval)
 		goto out;
 
@@ -1847,11 +1805,11 @@ int input_register_device(struct input_dev *dev)
 		dev->rep[REP_PERIOD] = 33;
 	}
 
-	if (!dev->getkeycode && !dev->getkeycode_new)
-		dev->getkeycode_new = input_default_getkeycode;
+	if (!dev->getkeycode)
+		dev->getkeycode = input_default_getkeycode;
 
-	if (!dev->setkeycode && !dev->setkeycode_new)
-		dev->setkeycode_new = input_default_setkeycode;
+	if (!dev->setkeycode)
+		dev->setkeycode = input_default_setkeycode;
 
 	dev_set_name(&dev->dev, "input%ld",
 		     (unsigned long) atomic_inc_return(&input_no) - 1);
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b7dca74eb9be..b16bed038f72 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -2,7 +2,7 @@
 # Input core configuration
 #
 menuconfig INPUT_KEYBOARD
-	bool "Keyboards" if EMBEDDED || !X86
+	bool "Keyboards" if EXPERT || !X86
 	default y
 	help
 	  Say Y here, and a list of supported keyboards will be displayed.
@@ -57,7 +57,7 @@ config KEYBOARD_ATARI
 	  module will be called atakbd.
 
 config KEYBOARD_ATKBD
-	tristate "AT keyboard" if EMBEDDED || !X86
+	tristate "AT keyboard" if EXPERT || !X86
 	default y
 	select SERIO
 	select SERIO_LIBPS2
@@ -112,6 +112,16 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
 	  right-hand column will be interpreted as the key shown in the
 	  left-hand column.
 
+config KEYBOARD_QT1070
+       tristate "Atmel AT42QT1070 Touch Sensor Chip"
+       depends on I2C
+       help
+         Say Y here if you want to use Atmel AT42QT1070 QTouch
+         Sensor chip as input device.
+
+         To compile this driver as a module, choose M here:
+         the module will be called qt1070
+
 config KEYBOARD_QT2160
 	tristate "Atmel AT42QT2160 Touch Sensor Chip"
 	depends on I2C && EXPERIMENTAL
@@ -468,6 +478,16 @@ config KEYBOARD_SPEAR
 	  To compile this driver as a module, choose M here: the
 	  module will be called spear-keboard.
 
+config KEYBOARD_TC3589X
+	tristate "TC3589X Keypad support"
+	depends on MFD_TC3589X
+	help
+	  Say Y here if you want to use the keypad controller on
+	  TC35892/3 I/O expander.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tc3589x-keypad.
+
 config KEYBOARD_TNETV107X
 	tristate "TI TNETV107X keypad support"
 	depends on ARCH_DAVINCI_TNETV107X
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 3456b931e254..878e6c20deb0 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_KEYBOARD_OMAP4)		+= omap4-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
+obj-$(CONFIG_KEYBOARD_QT1070)           += qt1070.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
+obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
 obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o
 obj-$(CONFIG_KEYBOARD_TNETV107X)	+= tnetv107x-keypad.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index f7c2a166576b..b732870ecc89 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/leds.h>
+#include <linux/pm.h>
 #include <linux/i2c/lm8323.h>
 #include <linux/slab.h>
 
@@ -802,8 +803,9 @@ static int __devexit lm8323_remove(struct i2c_client *client)
  * We don't need to explicitly suspend the chip, as it already switches off
  * when there's no activity.
  */
-static int lm8323_suspend(struct i2c_client *client, pm_message_t mesg)
+static int lm8323_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct lm8323_chip *lm = i2c_get_clientdata(client);
 	int i;
 
@@ -821,8 +823,9 @@ static int lm8323_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int lm8323_resume(struct i2c_client *client)
+static int lm8323_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct lm8323_chip *lm = i2c_get_clientdata(client);
 	int i;
 
@@ -839,11 +842,10 @@ static int lm8323_resume(struct i2c_client *client)
 
 	return 0;
 }
-#else
-#define lm8323_suspend	NULL
-#define lm8323_resume	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(lm8323_pm_ops, lm8323_suspend, lm8323_resume);
+
 static const struct i2c_device_id lm8323_id[] = {
 	{ "lm8323", 0 },
 	{ }
@@ -852,11 +854,10 @@ static const struct i2c_device_id lm8323_id[] = {
 static struct i2c_driver lm8323_i2c_driver = {
 	.driver = {
 		.name	= "lm8323",
+		.pm	= &lm8323_pm_ops,
 	},
 	.probe		= lm8323_probe,
 	.remove		= __devexit_p(lm8323_remove),
-	.suspend	= lm8323_suspend,
-	.resume		= lm8323_resume,
 	.id_table	= lm8323_id,
 };
 MODULE_DEVICE_TABLE(i2c, lm8323_id);
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
index 9091ff5ea808..5afe35ad24d3 100644
--- a/drivers/input/keyboard/max7359_keypad.c
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 
@@ -271,8 +272,10 @@ static int __devexit max7359_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int max7359_suspend(struct i2c_client *client, pm_message_t mesg)
+static int max7359_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	max7359_fall_deepsleep(client);
 
 	if (device_may_wakeup(&client->dev))
@@ -281,8 +284,10 @@ static int max7359_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int max7359_resume(struct i2c_client *client)
+static int max7359_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	if (device_may_wakeup(&client->dev))
 		disable_irq_wake(client->irq);
 
@@ -291,11 +296,10 @@ static int max7359_resume(struct i2c_client *client)
 
 	return 0;
 }
-#else
-#define max7359_suspend	NULL
-#define max7359_resume	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(max7359_pm, max7359_suspend, max7359_resume);
+
 static const struct i2c_device_id max7359_ids[] = {
 	{ "max7359", 0 },
 	{ }
@@ -305,11 +309,10 @@ MODULE_DEVICE_TABLE(i2c, max7359_ids);
 static struct i2c_driver max7359_i2c_driver = {
 	.driver = {
 		.name = "max7359",
+		.pm   = &max7359_pm,
 	},
 	.probe		= max7359_probe,
 	.remove		= __devexit_p(max7359_remove),
-	.suspend	= max7359_suspend,
-	.resume		= max7359_resume,
 	.id_table	= max7359_ids,
 };
 
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 63b849d7e90b..af1aab324a4c 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -1,5 +1,5 @@
 /*
- * mcs_touchkey.c - Touchkey driver for MELFAS MCS5000/5080 controller
+ * Touchkey driver for MELFAS MCS5000/5080 controller
  *
  * Copyright (C) 2010 Samsung Electronics Co.Ltd
  * Author: HeungJun Kim <riverful.kim@samsung.com>
@@ -19,6 +19,7 @@
 #include <linux/input.h>
 #include <linux/irq.h>
 #include <linux/slab.h>
+#include <linux/pm.h>
 
 /* MCS5000 Touchkey */
 #define MCS5000_TOUCHKEY_STATUS		0x04
@@ -45,6 +46,8 @@ struct mcs_touchkey_chip {
 };
 
 struct mcs_touchkey_data {
+	void (*poweron)(bool);
+
 	struct i2c_client *client;
 	struct input_dev *input_dev;
 	struct mcs_touchkey_chip chip;
@@ -169,6 +172,11 @@ static int __devinit mcs_touchkey_probe(struct i2c_client *client,
 	if (pdata->cfg_pin)
 		pdata->cfg_pin();
 
+	if (pdata->poweron) {
+		data->poweron = pdata->poweron;
+		data->poweron(true);
+	}
+
 	error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
 			IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
 	if (error) {
@@ -196,12 +204,57 @@ static int __devexit mcs_touchkey_remove(struct i2c_client *client)
 	struct mcs_touchkey_data *data = i2c_get_clientdata(client);
 
 	free_irq(client->irq, data);
+	if (data->poweron)
+		data->poweron(false);
 	input_unregister_device(data->input_dev);
 	kfree(data);
 
 	return 0;
 }
 
+static void mcs_touchkey_shutdown(struct i2c_client *client)
+{
+	struct mcs_touchkey_data *data = i2c_get_clientdata(client);
+
+	if (data->poweron)
+		data->poweron(false);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mcs_touchkey_suspend(struct device *dev)
+{
+	struct mcs_touchkey_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+
+	/* Disable the work */
+	disable_irq(client->irq);
+
+	/* Finally turn off the power */
+	if (data->poweron)
+		data->poweron(false);
+
+	return 0;
+}
+
+static int mcs_touchkey_resume(struct device *dev)
+{
+	struct mcs_touchkey_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+
+	/* Enable the device first */
+	if (data->poweron)
+		data->poweron(true);
+
+	/* Enable irq again */
+	enable_irq(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops,
+			 mcs_touchkey_suspend, mcs_touchkey_resume);
+
 static const struct i2c_device_id mcs_touchkey_id[] = {
 	{ "mcs5000_touchkey", MCS5000_TOUCHKEY },
 	{ "mcs5080_touchkey", MCS5080_TOUCHKEY },
@@ -213,9 +266,11 @@ static struct i2c_driver mcs_touchkey_driver = {
 	.driver = {
 		.name	= "mcs_touchkey",
 		.owner	= THIS_MODULE,
+		.pm	= &mcs_touchkey_pm_ops,
 	},
 	.probe		= mcs_touchkey_probe,
 	.remove		= __devexit_p(mcs_touchkey_remove),
+	.shutdown       = mcs_touchkey_shutdown,
 	.id_table	= mcs_touchkey_id,
 };
 
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index a72e61ddca91..0e2a19cb43d8 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -65,7 +65,6 @@ struct omap_kp {
 
 static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
 
-static int *keymap;
 static unsigned int *row_gpios;
 static unsigned int *col_gpios;
 
@@ -162,20 +161,11 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 	}
 }
 
-static inline int omap_kp_find_key(int col, int row)
-{
-	int i, key;
-
-	key = KEY(col, row, 0);
-	for (i = 0; keymap[i] != 0; i++)
-		if ((keymap[i] & 0xff000000) == key)
-			return keymap[i] & 0x00ffffff;
-	return -1;
-}
-
 static void omap_kp_tasklet(unsigned long data)
 {
 	struct omap_kp *omap_kp_data = (struct omap_kp *) data;
+	unsigned short *keycodes = omap_kp_data->input->keycode;
+	unsigned int row_shift = get_count_order(omap_kp_data->cols);
 	unsigned char new_state[8], changed, key_down = 0;
 	int col, row;
 	int spurious = 0;
@@ -199,7 +189,7 @@ static void omap_kp_tasklet(unsigned long data)
 			       row, (new_state[col] & (1 << row)) ?
 			       "pressed" : "released");
 #else
-			key = omap_kp_find_key(col, row);
+			key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
 			if (key < 0) {
 				printk(KERN_WARNING
 				      "omap-keypad: Spurious key event %d-%d\n",
@@ -298,13 +288,18 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	struct input_dev *input_dev;
 	struct omap_kp_platform_data *pdata =  pdev->dev.platform_data;
 	int i, col_idx, row_idx, irq_idx, ret;
+	unsigned int row_shift, keycodemax;
 
-	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
-		printk(KERN_ERR "No rows, cols or keymap from pdata\n");
+	if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
+		printk(KERN_ERR "No rows, cols or keymap_data from pdata\n");
 		return -EINVAL;
 	}
 
-	omap_kp = kzalloc(sizeof(struct omap_kp), GFP_KERNEL);
+	row_shift = get_count_order(pdata->cols);
+	keycodemax = pdata->rows << row_shift;
+
+	omap_kp = kzalloc(sizeof(struct omap_kp) +
+			keycodemax * sizeof(unsigned short), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!omap_kp || !input_dev) {
 		kfree(omap_kp);
@@ -320,7 +315,9 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	if (!cpu_is_omap24xx())
 		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
-	keymap = pdata->keymap;
+	input_dev->keycode      = &omap_kp[1];
+	input_dev->keycodesize  = sizeof(unsigned short);
+	input_dev->keycodemax   = keycodemax;
 
 	if (pdata->rep)
 		__set_bit(EV_REP, input_dev->evbit);
@@ -374,8 +371,8 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 
 	/* setup input device */
 	__set_bit(EV_KEY, input_dev->evbit);
-	for (i = 0; keymap[i] != 0; i++)
-		__set_bit(keymap[i] & KEY_MAX, input_dev->keybit);
+	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
+			input_dev->keycode, input_dev->keybit);
 	input_dev->name = "omap-keypad";
 	input_dev->phys = "omap-keypad/input0";
 	input_dev->dev.parent = &pdev->dev;
@@ -416,7 +413,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	return 0;
 err5:
 	for (i = irq_idx - 1; i >=0; i--)
-		free_irq(row_gpios[i], 0);
+		free_irq(row_gpios[i], NULL);
 err4:
 	input_unregister_device(omap_kp->input);
 	input_dev = NULL;
@@ -447,11 +444,11 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
 			gpio_free(col_gpios[i]);
 		for (i = 0; i < omap_kp->rows; i++) {
 			gpio_free(row_gpios[i]);
-			free_irq(gpio_to_irq(row_gpios[i]), 0);
+			free_irq(gpio_to_irq(row_gpios[i]), NULL);
 		}
 	} else {
 		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
-		free_irq(omap_kp->irq, 0);
+		free_irq(omap_kp->irq, NULL);
 	}
 
 	del_timer_sync(&omap_kp->timer);
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 45bd0977d006..c51a3c4a7feb 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -29,6 +29,7 @@
 #include <linux/io.h>
 #include <linux/input.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 
 #include <plat/omap4-keypad.h>
 
@@ -80,20 +81,6 @@ struct omap4_keypad {
 	unsigned short keymap[];
 };
 
-static void __devinit omap4_keypad_config(struct omap4_keypad *keypad_data)
-{
-	__raw_writel(OMAP4_VAL_FUNCTIONALCFG,
-			keypad_data->base + OMAP4_KBD_CTRL);
-	__raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
-			keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
-	__raw_writel(OMAP4_VAL_IRQDISABLE,
-			keypad_data->base + OMAP4_KBD_IRQSTATUS);
-	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
-			keypad_data->base + OMAP4_KBD_IRQENABLE);
-	__raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
-			keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
-}
-
 /* Interrupt handler */
 static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
 {
@@ -144,6 +131,49 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int omap4_keypad_open(struct input_dev *input)
+{
+	struct omap4_keypad *keypad_data = input_get_drvdata(input);
+
+	pm_runtime_get_sync(input->dev.parent);
+
+	disable_irq(keypad_data->irq);
+
+	__raw_writel(OMAP4_VAL_FUNCTIONALCFG,
+			keypad_data->base + OMAP4_KBD_CTRL);
+	__raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
+			keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
+	__raw_writel(OMAP4_VAL_IRQDISABLE,
+			keypad_data->base + OMAP4_KBD_IRQSTATUS);
+	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
+			keypad_data->base + OMAP4_KBD_IRQENABLE);
+	__raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
+			keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
+
+	enable_irq(keypad_data->irq);
+
+	return 0;
+}
+
+static void omap4_keypad_close(struct input_dev *input)
+{
+	struct omap4_keypad *keypad_data = input_get_drvdata(input);
+
+	disable_irq(keypad_data->irq);
+
+	/* Disable interrupts */
+	__raw_writel(OMAP4_VAL_IRQDISABLE,
+		     keypad_data->base + OMAP4_KBD_IRQENABLE);
+
+	/* clear pending interrupts */
+	__raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
+			keypad_data->base + OMAP4_KBD_IRQSTATUS);
+
+	enable_irq(keypad_data->irq);
+
+	pm_runtime_put_sync(input->dev.parent);
+}
+
 static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 {
 	const struct omap4_keypad_platform_data *pdata;
@@ -225,6 +255,9 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	input_dev->id.product = 0x0001;
 	input_dev->id.version = 0x0001;
 
+	input_dev->open = omap4_keypad_open;
+	input_dev->close = omap4_keypad_close;
+
 	input_dev->keycode	= keypad_data->keymap;
 	input_dev->keycodesize	= sizeof(keypad_data->keymap[0]);
 	input_dev->keycodemax	= max_keys;
@@ -239,8 +272,6 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
 			input_dev->keycode, input_dev->keybit);
 
-	omap4_keypad_config(keypad_data);
-
 	error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
 			     IRQF_TRIGGER_RISING,
 			     "omap4-keypad", keypad_data);
@@ -249,17 +280,19 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
 		goto err_free_input;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
 	error = input_register_device(keypad_data->input);
 	if (error < 0) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		goto err_free_irq;
+		goto err_pm_disable;
 	}
 
-
 	platform_set_drvdata(pdev, keypad_data);
 	return 0;
 
-err_free_irq:
+err_pm_disable:
+	pm_runtime_disable(&pdev->dev);
 	free_irq(keypad_data->irq, keypad_data);
 err_free_input:
 	input_free_device(input_dev);
@@ -278,6 +311,9 @@ static int __devexit omap4_keypad_remove(struct platform_device *pdev)
 	struct resource *res;
 
 	free_irq(keypad_data->irq, keypad_data);
+
+	pm_runtime_disable(&pdev->dev);
+
 	input_unregister_device(keypad_data->input);
 
 	iounmap(keypad_data->base);
diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
new file mode 100644
index 000000000000..fba8404c7297
--- /dev/null
+++ b/drivers/input/keyboard/qt1070.c
@@ -0,0 +1,276 @@
+/*
+ *  Atmel AT42QT1070 QTouch Sensor Controller
+ *
+ *  Copyright (C) 2011 Atmel
+ *
+ *  Authors: Bo Shen <voice.shen@atmel.com>
+ *
+ *  Base on AT42QT2160 driver by:
+ *  Raphael Derosso Pereira <raphaelpereira@gmail.com>
+ *  Copyright (C) 2009
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+
+/* Address for each register */
+#define CHIP_ID            0x00
+#define QT1070_CHIP_ID     0x2E
+
+#define FW_VERSION         0x01
+#define QT1070_FW_VERSION  0x15
+
+#define DET_STATUS         0x02
+
+#define KEY_STATUS         0x03
+
+/* Calibrate */
+#define CALIBRATE_CMD      0x38
+#define QT1070_CAL_TIME    200
+
+/* Reset */
+#define RESET              0x39
+#define QT1070_RESET_TIME  255
+
+/* AT42QT1070 support up to 7 keys */
+static const unsigned short qt1070_key2code[] = {
+	KEY_0, KEY_1, KEY_2, KEY_3,
+	KEY_4, KEY_5, KEY_6,
+};
+
+struct qt1070_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	unsigned int irq;
+	unsigned short keycodes[ARRAY_SIZE(qt1070_key2code)];
+	u8 last_keys;
+};
+
+static int qt1070_read(struct i2c_client *client, u8 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"can not read register, returned %d\n", ret);
+
+	return ret;
+}
+
+static int qt1070_write(struct i2c_client *client, u8 reg, u8 data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, data);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"can not write register, returned %d\n", ret);
+
+	return ret;
+}
+
+static bool __devinit qt1070_identify(struct i2c_client *client)
+{
+	int id, ver;
+
+	/* Read Chip ID */
+	id = qt1070_read(client, CHIP_ID);
+	if (id != QT1070_CHIP_ID) {
+		dev_err(&client->dev, "ID %d not supported\n", id);
+		return false;
+	}
+
+	/* Read firmware version */
+	ver = qt1070_read(client, FW_VERSION);
+	if (ver < 0) {
+		dev_err(&client->dev, "could not read the firmware version\n");
+		return false;
+	}
+
+	dev_info(&client->dev, "AT42QT1070 firmware version %x\n", ver);
+
+	return true;
+}
+
+static irqreturn_t qt1070_interrupt(int irq, void *dev_id)
+{
+	struct qt1070_data *data = dev_id;
+	struct i2c_client *client = data->client;
+	struct input_dev *input = data->input;
+	int i;
+	u8 new_keys, keyval, mask = 0x01;
+
+	/* Read the detected status register, thus clearing interrupt */
+	qt1070_read(client, DET_STATUS);
+
+	/* Read which key changed */
+	new_keys = qt1070_read(client, KEY_STATUS);
+
+	for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) {
+		keyval = new_keys & mask;
+		if ((data->last_keys & mask) != keyval)
+			input_report_key(input, data->keycodes[i], keyval);
+		mask <<= 1;
+	}
+	input_sync(input);
+
+	data->last_keys = new_keys;
+	return IRQ_HANDLED;
+}
+
+static int __devinit qt1070_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct qt1070_data *data;
+	struct input_dev *input;
+	int i;
+	int err;
+
+	err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE);
+	if (!err) {
+		dev_err(&client->dev, "%s adapter not supported\n",
+			dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "please assign the irq to this device\n");
+		return -EINVAL;
+	}
+
+	/* Identify the qt1070 chip */
+	if (!qt1070_identify(client))
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct qt1070_data), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!data || !input) {
+		dev_err(&client->dev, "insufficient memory\n");
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input = input;
+	data->irq = client->irq;
+
+	input->name = "AT42QT1070 QTouch Sensor";
+	input->dev.parent = &client->dev;
+	input->id.bustype = BUS_I2C;
+
+	/* Add the keycode */
+	input->keycode = data->keycodes;
+	input->keycodesize = sizeof(data->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(qt1070_key2code);
+
+	__set_bit(EV_KEY, input->evbit);
+
+	for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) {
+		data->keycodes[i] = qt1070_key2code[i];
+		__set_bit(qt1070_key2code[i], input->keybit);
+	}
+
+	/* Calibrate device */
+	qt1070_write(client, CALIBRATE_CMD, 1);
+	msleep(QT1070_CAL_TIME);
+
+	/* Soft reset */
+	qt1070_write(client, RESET, 1);
+	msleep(QT1070_RESET_TIME);
+
+	err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
+		IRQF_TRIGGER_NONE, client->dev.driver->name, data);
+	if (err) {
+		dev_err(&client->dev, "fail to request irq\n");
+		goto err_free_mem;
+	}
+
+	/* Register the input device */
+	err = input_register_device(data->input);
+	if (err) {
+		dev_err(&client->dev, "Failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, data);
+
+	/* Read to clear the chang line */
+	qt1070_read(client, DET_STATUS);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input);
+	kfree(data);
+	return err;
+}
+
+static int __devexit qt1070_remove(struct i2c_client *client)
+{
+	struct qt1070_data *data = i2c_get_clientdata(client);
+
+	/* Release IRQ */
+	free_irq(client->irq, data);
+
+	input_unregister_device(data->input);
+	kfree(data);
+
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+static const struct i2c_device_id qt1070_id[] = {
+	{ "qt1070", 0 },
+	{ },
+};
+
+static struct i2c_driver qt1070_driver = {
+	.driver	= {
+		.name	= "qt1070",
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= qt1070_id,
+	.probe		= qt1070_probe,
+	.remove		= __devexit_p(qt1070_remove),
+};
+
+static int __init qt1070_init(void)
+{
+	return i2c_add_driver(&qt1070_driver);
+}
+module_init(qt1070_init);
+
+static void __exit qt1070_exit(void)
+{
+	i2c_del_driver(&qt1070_driver);
+}
+module_exit(qt1070_exit);
+
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("Driver for AT42QT1070 QTouch sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
new file mode 100644
index 000000000000..99122f59e988
--- /dev/null
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -0,0 +1,472 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License, version 2
+ *
+ * TC35893 MFD Keypad Controller driver
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mfd/tc3589x.h>
+
+/* Maximum supported keypad matrix row/columns size */
+#define TC3589x_MAX_KPROW               8
+#define TC3589x_MAX_KPCOL               12
+
+/* keypad related Constants */
+#define TC3589x_MAX_DEBOUNCE_SETTLE     0xFF
+#define DEDICATED_KEY_VAL		0xFF
+
+/* Pull up/down masks */
+#define TC3589x_NO_PULL_MASK		0x0
+#define TC3589x_PULL_DOWN_MASK		0x1
+#define TC3589x_PULL_UP_MASK		0x2
+#define TC3589x_PULLUP_ALL_MASK		0xAA
+#define TC3589x_IO_PULL_VAL(index, mask)	((mask)<<((index)%4)*2))
+
+/* Bit masks for IOCFG register */
+#define IOCFG_BALLCFG		0x01
+#define IOCFG_IG		0x08
+
+#define KP_EVCODE_COL_MASK	0x0F
+#define KP_EVCODE_ROW_MASK	0x70
+#define KP_RELEASE_EVT_MASK	0x80
+
+#define KP_ROW_SHIFT		4
+
+#define KP_NO_VALID_KEY_MASK	0x7F
+
+/* bit masks for RESTCTRL register */
+#define TC3589x_KBDRST		0x2
+#define TC3589x_IRQRST		0x10
+#define TC3589x_RESET_ALL	0x1B
+
+/* KBDMFS register bit mask */
+#define TC3589x_KBDMFS_EN	0x1
+
+/* CLKEN register bitmask */
+#define KPD_CLK_EN		0x1
+
+/* RSTINTCLR register bit mask */
+#define IRQ_CLEAR		0x1
+
+/* bit masks for keyboard interrupts*/
+#define TC3589x_EVT_LOSS_INT	0x8
+#define TC3589x_EVT_INT		0x4
+#define TC3589x_KBD_LOSS_INT	0x2
+#define TC3589x_KBD_INT		0x1
+
+/* bit masks for keyboard interrupt clear*/
+#define TC3589x_EVT_INT_CLR	0x2
+#define TC3589x_KBD_INT_CLR	0x1
+
+#define TC3589x_KBD_KEYMAP_SIZE     64
+
+/**
+ * struct tc_keypad - data structure used by keypad driver
+ * @input:      pointer to input device object
+ * @board:      keypad platform device
+ * @krow:	number of rows
+ * @kcol:	number of coloumns
+ * @keymap:     matrix scan code table for keycodes
+ */
+struct tc_keypad {
+	struct tc3589x *tc3589x;
+	struct input_dev *input;
+	const struct tc3589x_keypad_platform_data *board;
+	unsigned int krow;
+	unsigned int kcol;
+	unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+	bool keypad_stopped;
+};
+
+static int __devinit tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
+{
+	int ret;
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	u8 settle_time = keypad->board->settle_time;
+	u8 dbounce_period = keypad->board->debounce_period;
+	u8 rows = keypad->board->krow & 0xf;	/* mask out the nibble */
+	u8 column = keypad->board->kcol & 0xf;	/* mask out the nibble */
+
+	/* validate platform configurations */
+	if (keypad->board->kcol > TC3589x_MAX_KPCOL ||
+	    keypad->board->krow > TC3589x_MAX_KPROW ||
+	    keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE ||
+	    keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE)
+		return -EINVAL;
+
+	/* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE,
+			(rows << KP_ROW_SHIFT) | column);
+	if (ret < 0)
+		return ret;
+
+	/* configure dedicated key config, no dedicated key selected */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_LSB, DEDICATED_KEY_VAL);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_MSB, DEDICATED_KEY_VAL);
+	if (ret < 0)
+		return ret;
+
+	/* Configure settle time */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time);
+	if (ret < 0)
+		return ret;
+
+	/* Configure debounce time */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period);
+	if (ret < 0)
+		return ret;
+
+	/* Start of initialise keypad GPIOs */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_IOCFG, 0x0, IOCFG_IG);
+	if (ret < 0)
+		return ret;
+
+	/* Configure pull-up resistors for all row GPIOs */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_LSB,
+					TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_MSB,
+					TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	/* Configure pull-up resistors for all column GPIOs */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_LSB,
+			TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_MSB,
+			TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG2_LSB,
+			TC3589x_PULLUP_ALL_MASK);
+
+	return ret;
+}
+
+#define TC35893_DATA_REGS		4
+#define TC35893_KEYCODE_FIFO_EMPTY	0x7f
+#define TC35893_KEYCODE_FIFO_CLEAR	0xff
+#define TC35893_KEYPAD_ROW_SHIFT	0x3
+
+static irqreturn_t tc3589x_keypad_irq(int irq, void *dev)
+{
+	struct tc_keypad *keypad = dev;
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	u8 i, row_index, col_index, kbd_code, up;
+	u8 code;
+
+	for (i = 0; i < TC35893_DATA_REGS * 2; i++) {
+		kbd_code = tc3589x_reg_read(tc3589x, TC3589x_EVTCODE_FIFO);
+
+		/* loop till fifo is empty and no more keys are pressed */
+		if (kbd_code == TC35893_KEYCODE_FIFO_EMPTY ||
+				kbd_code == TC35893_KEYCODE_FIFO_CLEAR)
+			continue;
+
+		/* valid key is found */
+		col_index = kbd_code & KP_EVCODE_COL_MASK;
+		row_index = (kbd_code & KP_EVCODE_ROW_MASK) >> KP_ROW_SHIFT;
+		code = MATRIX_SCAN_CODE(row_index, col_index,
+						TC35893_KEYPAD_ROW_SHIFT);
+		up = kbd_code & KP_RELEASE_EVT_MASK;
+
+		input_event(keypad->input, EV_MSC, MSC_SCAN, code);
+		input_report_key(keypad->input, keypad->keymap[code], !up);
+		input_sync(keypad->input);
+	}
+
+	/* clear IRQ */
+	tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+			0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+	/* enable IRQ */
+	tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+			0x0, TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int tc3589x_keypad_enable(struct tc_keypad *keypad)
+{
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	int ret;
+
+	/* pull the keypad module out of reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* configure KBDMFS */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMFS, 0x0, TC3589x_KBDMFS_EN);
+	if (ret < 0)
+		return ret;
+
+	/* enable the keypad clock */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x0, KPD_CLK_EN);
+	if (ret < 0)
+		return ret;
+
+	/* clear pending IRQs */
+	ret =  tc3589x_set_bits(tc3589x, TC3589x_RSTINTCLR, 0x0, 0x1);
+	if (ret < 0)
+		return ret;
+
+	/* enable the IRQs */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, 0x0,
+					TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+	if (ret < 0)
+		return ret;
+
+	keypad->keypad_stopped = false;
+
+	return ret;
+}
+
+static int tc3589x_keypad_disable(struct tc_keypad *keypad)
+{
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	int ret;
+
+	/* clear IRQ */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+			0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+	if (ret < 0)
+		return ret;
+
+	/* disable all interrupts */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+			~(TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT), 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* disable the keypad module */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x1, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* put the keypad module into reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x1);
+
+	keypad->keypad_stopped = true;
+
+	return ret;
+}
+
+static int tc3589x_keypad_open(struct input_dev *input)
+{
+	int error;
+	struct tc_keypad *keypad = input_get_drvdata(input);
+
+	/* enable the keypad module */
+	error = tc3589x_keypad_enable(keypad);
+	if (error < 0) {
+		dev_err(&input->dev, "failed to enable keypad module\n");
+		return error;
+	}
+
+	error = tc3589x_keypad_init_key_hardware(keypad);
+	if (error < 0) {
+		dev_err(&input->dev, "failed to configure keypad module\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static void tc3589x_keypad_close(struct input_dev *input)
+{
+	struct tc_keypad *keypad = input_get_drvdata(input);
+
+	/* disable the keypad module */
+	tc3589x_keypad_disable(keypad);
+}
+
+static int __devinit tc3589x_keypad_probe(struct platform_device *pdev)
+{
+	struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+	struct tc_keypad *keypad;
+	struct input_dev *input;
+	const struct tc3589x_keypad_platform_data *plat;
+	int error, irq;
+
+	plat = tc3589x->pdata->keypad;
+	if (!plat) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad = kzalloc(sizeof(struct tc_keypad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!keypad || !input) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->board = plat;
+	keypad->input = input;
+	keypad->tc3589x = tc3589x;
+
+	input->id.bustype = BUS_I2C;
+	input->name = pdev->name;
+	input->dev.parent = &pdev->dev;
+
+	input->keycode = keypad->keymap;
+	input->keycodesize = sizeof(keypad->keymap[0]);
+	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+	input->open = tc3589x_keypad_open;
+	input->close = tc3589x_keypad_close;
+
+	input_set_drvdata(input, keypad);
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, input->evbit);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	matrix_keypad_build_keymap(plat->keymap_data, 0x3,
+			input->keycode, input->keybit);
+
+	error = request_threaded_irq(irq, NULL,
+			tc3589x_keypad_irq, plat->irqtype,
+			"tc3589x-keypad", keypad);
+	if (error < 0) {
+		dev_err(&pdev->dev,
+				"Could not allocate irq %d,error %d\n",
+				irq, error);
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "Could not register input device\n");
+		goto err_free_irq;
+	}
+
+	/* let platform decide if keypad is a wakeup source or not */
+	device_init_wakeup(&pdev->dev, plat->enable_wakeup);
+	device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup);
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_irq:
+	free_irq(irq, keypad);
+err_free_mem:
+	input_free_device(input);
+	kfree(keypad);
+	return error;
+}
+
+static int __devexit tc3589x_keypad_remove(struct platform_device *pdev)
+{
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (!keypad->keypad_stopped)
+		tc3589x_keypad_disable(keypad);
+
+	free_irq(irq, keypad);
+
+	input_unregister_device(keypad->input);
+
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tc3589x_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	/* keypad is already off; we do nothing */
+	if (keypad->keypad_stopped)
+		return 0;
+
+	/* if device is not a wakeup source, disable it for powersave */
+	if (!device_may_wakeup(&pdev->dev))
+		tc3589x_keypad_disable(keypad);
+	else
+		enable_irq_wake(irq);
+
+	return 0;
+}
+
+static int tc3589x_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (!keypad->keypad_stopped)
+		return 0;
+
+	/* enable the device to resume normal operations */
+	if (!device_may_wakeup(&pdev->dev))
+		tc3589x_keypad_enable(keypad);
+	else
+		disable_irq_wake(irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tc3589x_keypad_dev_pm_ops,
+			 tc3589x_keypad_suspend, tc3589x_keypad_resume);
+
+static struct platform_driver tc3589x_keypad_driver = {
+	.driver	= {
+		.name	= "tc3589x-keypad",
+		.owner	= THIS_MODULE,
+		.pm	= &tc3589x_keypad_dev_pm_ops,
+	},
+	.probe	= tc3589x_keypad_probe,
+	.remove	= __devexit_p(tc3589x_keypad_remove),
+};
+
+static int __init tc3589x_keypad_init(void)
+{
+	return platform_driver_register(&tc3589x_keypad_driver);
+}
+module_init(tc3589x_keypad_init);
+
+static void __exit tc3589x_keypad_exit(void)
+{
+	return platform_driver_unregister(&tc3589x_keypad_driver);
+}
+module_exit(tc3589x_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer");
+MODULE_DESCRIPTION("TC35893 Keypad Driver");
+MODULE_ALIAS("platform:tc3589x-keypad");
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 800fbccf1f0f..3afea3f89718 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -297,6 +297,7 @@ static int __devinit tca6416_keypad_probe(struct i2c_client *client,
 	}
 
 	i2c_set_clientdata(client, chip);
+	device_init_wakeup(&client->dev, 1);
 
 	return 0;
 
@@ -326,10 +327,37 @@ static int __devexit tca6416_keypad_remove(struct i2c_client *client)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int tca6416_keypad_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(chip->irqnum);
+
+	return 0;
+}
+
+static int tca6416_keypad_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tca6416_keypad_chip *chip = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(chip->irqnum);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tca6416_keypad_dev_pm_ops,
+			 tca6416_keypad_suspend, tca6416_keypad_resume);
 
 static struct i2c_driver tca6416_keypad_driver = {
 	.driver = {
 		.name	= "tca6416-keypad",
+		.pm	= &tca6416_keypad_dev_pm_ops,
 	},
 	.probe		= tca6416_keypad_probe,
 	.remove		= __devexit_p(tca6416_keypad_remove),
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index f0d90172a65f..f9cf0881b0e3 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -294,24 +294,6 @@ config INPUT_SGI_BTNS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sgi_btns.
 
-config INPUT_WINBOND_CIR
-	tristate "Winbond IR remote control"
-	depends on X86 && PNP
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGERS
-	select BITREVERSE
-	help
-	  Say Y here if you want to use the IR remote functionality found
-	  in some Winbond SuperI/O chips. Currently only the WPCD376I
-	  chip is supported (included in some Intel Media series motherboards).
-
-	  IR Receive and wake-on-IR from suspend and power-off is currently
-	  supported.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called winbond_cir.
-
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
 	depends on (GSC || HP300) && SERIO
@@ -472,4 +454,17 @@ config INPUT_CMA3000_I2C
 	  To compile this driver as a module, choose M here: the
 	  module will be called cma3000_d0x_i2c.
 
+config INPUT_XEN_KBDDEV_FRONTEND
+	tristate "Xen virtual keyboard and mouse support"
+	depends on XEN_FBDEV_FRONTEND
+	default y
+	select XEN_XENBUS_FRONTEND
+	help
+	  This driver implements the front-end of the Xen virtual
+	  keyboard and mouse device driver.  It communicates with a back-end
+	  in another domain.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xen-kbdfront.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 35bcfe46555e..e3f7984e6274 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -40,8 +40,8 @@ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
-obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 
diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c
index 2bef8fa56c94..e21deb1baa8a 100644
--- a/drivers/input/misc/ad714x-i2c.c
+++ b/drivers/input/misc/ad714x-i2c.c
@@ -10,23 +10,23 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/pm.h>
 #include "ad714x.h"
 
 #ifdef CONFIG_PM
-static int ad714x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+static int ad714x_i2c_suspend(struct device *dev)
 {
-	return ad714x_disable(i2c_get_clientdata(client));
+	return ad714x_disable(i2c_get_clientdata(to_i2c_client(dev)));
 }
 
-static int ad714x_i2c_resume(struct i2c_client *client)
+static int ad714x_i2c_resume(struct device *dev)
 {
-	return ad714x_enable(i2c_get_clientdata(client));
+	return ad714x_enable(i2c_get_clientdata(to_i2c_client(dev)));
 }
-#else
-# define ad714x_i2c_suspend NULL
-# define ad714x_i2c_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(ad714x_i2c_pm, ad714x_i2c_suspend, ad714x_i2c_resume);
+
 static int ad714x_i2c_write(struct device *dev, unsigned short reg,
 				unsigned short data)
 {
@@ -114,11 +114,10 @@ MODULE_DEVICE_TABLE(i2c, ad714x_id);
 static struct i2c_driver ad714x_i2c_driver = {
 	.driver = {
 		.name = "ad714x_captouch",
+		.pm   = &ad714x_i2c_pm,
 	},
 	.probe    = ad714x_i2c_probe,
 	.remove   = __devexit_p(ad714x_i2c_remove),
-	.suspend  = ad714x_i2c_suspend,
-	.resume	  = ad714x_i2c_resume,
 	.id_table = ad714x_id,
 };
 
diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c
index 7f8dedfd1bfe..4120dd549305 100644
--- a/drivers/input/misc/ad714x-spi.c
+++ b/drivers/input/misc/ad714x-spi.c
@@ -9,6 +9,7 @@
 #include <linux/input.h>	/* BUS_I2C */
 #include <linux/module.h>
 #include <linux/spi/spi.h>
+#include <linux/pm.h>
 #include <linux/types.h>
 #include "ad714x.h"
 
@@ -16,20 +17,19 @@
 #define AD714x_SPI_READ            BIT(10)
 
 #ifdef CONFIG_PM
-static int ad714x_spi_suspend(struct spi_device *spi, pm_message_t message)
+static int ad714x_spi_suspend(struct device *dev)
 {
-	return ad714x_disable(spi_get_drvdata(spi));
+	return ad714x_disable(spi_get_drvdata(to_spi_device(dev)));
 }
 
-static int ad714x_spi_resume(struct spi_device *spi)
+static int ad714x_spi_resume(struct device *dev)
 {
-	return ad714x_enable(spi_get_drvdata(spi));
+	return ad714x_enable(spi_get_drvdata(to_spi_device(dev)));
 }
-#else
-# define ad714x_spi_suspend NULL
-# define ad714x_spi_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume);
+
 static int ad714x_spi_read(struct device *dev, unsigned short reg,
 		unsigned short *data)
 {
@@ -79,11 +79,10 @@ static struct spi_driver ad714x_spi_driver = {
 	.driver = {
 		.name	= "ad714x_captouch",
 		.owner	= THIS_MODULE,
+		.pm	= &ad714x_spi_pm,
 	},
 	.probe		= ad714x_spi_probe,
 	.remove		= __devexit_p(ad714x_spi_remove),
-	.suspend	= ad714x_spi_suspend,
-	.resume		= ad714x_spi_resume,
 };
 
 static __init int ad714x_spi_init(void)
diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c
index 0779724af7e7..ccacf2bb06a4 100644
--- a/drivers/input/misc/adxl34x-i2c.c
+++ b/drivers/input/misc/adxl34x-i2c.c
@@ -11,6 +11,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/pm.h>
 #include "adxl34x.h"
 
 static int adxl34x_smbus_read(struct device *dev, unsigned char reg)
@@ -105,8 +106,9 @@ static int __devexit adxl34x_i2c_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int adxl34x_i2c_suspend(struct i2c_client *client, pm_message_t message)
+static int adxl34x_i2c_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct adxl34x *ac = i2c_get_clientdata(client);
 
 	adxl34x_suspend(ac);
@@ -114,19 +116,20 @@ static int adxl34x_i2c_suspend(struct i2c_client *client, pm_message_t message)
 	return 0;
 }
 
-static int adxl34x_i2c_resume(struct i2c_client *client)
+static int adxl34x_i2c_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct adxl34x *ac = i2c_get_clientdata(client);
 
 	adxl34x_resume(ac);
 
 	return 0;
 }
-#else
-# define adxl34x_i2c_suspend NULL
-# define adxl34x_i2c_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(adxl34x_i2c_pm, adxl34x_i2c_suspend,
+			 adxl34x_i2c_resume);
+
 static const struct i2c_device_id adxl34x_id[] = {
 	{ "adxl34x", 0 },
 	{ }
@@ -138,11 +141,10 @@ static struct i2c_driver adxl34x_driver = {
 	.driver = {
 		.name = "adxl34x",
 		.owner = THIS_MODULE,
+		.pm = &adxl34x_i2c_pm,
 	},
 	.probe    = adxl34x_i2c_probe,
 	.remove   = __devexit_p(adxl34x_i2c_remove),
-	.suspend  = adxl34x_i2c_suspend,
-	.resume   = adxl34x_i2c_resume,
 	.id_table = adxl34x_id,
 };
 
diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c
index 782de9e89828..f29de22fdda0 100644
--- a/drivers/input/misc/adxl34x-spi.c
+++ b/drivers/input/misc/adxl34x-spi.c
@@ -10,6 +10,7 @@
 #include <linux/input.h>	/* BUS_SPI */
 #include <linux/module.h>
 #include <linux/spi/spi.h>
+#include <linux/pm.h>
 #include <linux/types.h>
 #include "adxl34x.h"
 
@@ -57,7 +58,7 @@ static int adxl34x_spi_read_block(struct device *dev,
 	return (status < 0) ? status : 0;
 }
 
-static const struct adxl34x_bus_ops adx134x_spi_bops = {
+static const struct adxl34x_bus_ops adxl34x_spi_bops = {
 	.bustype	= BUS_SPI,
 	.write		= adxl34x_spi_write,
 	.read		= adxl34x_spi_read,
@@ -76,7 +77,7 @@ static int __devinit adxl34x_spi_probe(struct spi_device *spi)
 
 	ac = adxl34x_probe(&spi->dev, spi->irq,
 			   spi->max_speed_hz > MAX_FREQ_NO_FIFODELAY,
-			   &adx134x_spi_bops);
+			   &adxl34x_spi_bops);
 
 	if (IS_ERR(ac))
 		return PTR_ERR(ac);
@@ -94,8 +95,9 @@ static int __devexit adxl34x_spi_remove(struct spi_device *spi)
 }
 
 #ifdef CONFIG_PM
-static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
+static int adxl34x_spi_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
 
 	adxl34x_suspend(ac);
@@ -103,29 +105,29 @@ static int adxl34x_spi_suspend(struct spi_device *spi, pm_message_t message)
 	return 0;
 }
 
-static int adxl34x_spi_resume(struct spi_device *spi)
+static int adxl34x_spi_resume(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct adxl34x *ac = dev_get_drvdata(&spi->dev);
 
 	adxl34x_resume(ac);
 
 	return 0;
 }
-#else
-# define adxl34x_spi_suspend NULL
-# define adxl34x_spi_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(adxl34x_spi_pm, adxl34x_spi_suspend,
+			 adxl34x_spi_resume);
+
 static struct spi_driver adxl34x_driver = {
 	.driver = {
 		.name = "adxl34x",
 		.bus = &spi_bus_type,
 		.owner = THIS_MODULE,
+		.pm = &adxl34x_spi_pm,
 	},
 	.probe   = adxl34x_spi_probe,
 	.remove  = __devexit_p(adxl34x_spi_remove),
-	.suspend = adxl34x_spi_suspend,
-	.resume  = adxl34x_spi_resume,
 };
 
 static int __init adxl34x_spi_init(void)
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 0b0e9be63542..9ccdb82d869a 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -612,8 +612,8 @@ static int ati_remote2_input_init(struct ati_remote2 *ar2)
 	idev->open = ati_remote2_open;
 	idev->close = ati_remote2_close;
 
-	idev->getkeycode_new = ati_remote2_getkeycode;
-	idev->setkeycode_new = ati_remote2_setkeycode;
+	idev->getkeycode = ati_remote2_getkeycode;
+	idev->setkeycode = ati_remote2_setkeycode;
 
 	idev->name = ar2->name;
 	idev->phys = ar2->phys;
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 82542a1c1098..364bdf43a381 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -347,8 +347,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 {
 	struct uinput_user_dev	*user_dev;
 	struct input_dev	*dev;
-	char			*name;
-	int			i, size;
+	int			i;
 	int			retval;
 
 	if (count != sizeof(struct uinput_user_dev))
@@ -362,30 +361,25 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 
 	dev = udev->dev;
 
-	user_dev = kmalloc(sizeof(struct uinput_user_dev), GFP_KERNEL);
-	if (!user_dev)
-		return -ENOMEM;
-
-	if (copy_from_user(user_dev, buffer, sizeof(struct uinput_user_dev))) {
-		retval = -EFAULT;
-		goto exit;
-	}
+	user_dev = memdup_user(buffer, sizeof(struct uinput_user_dev));
+	if (IS_ERR(user_dev))
+		return PTR_ERR(user_dev);
 
 	udev->ff_effects_max = user_dev->ff_effects_max;
 
-	size = strnlen(user_dev->name, UINPUT_MAX_NAME_SIZE) + 1;
-	if (!size) {
+	/* Ensure name is filled in */
+	if (!user_dev->name[0]) {
 		retval = -EINVAL;
 		goto exit;
 	}
 
 	kfree(dev->name);
-	dev->name = name = kmalloc(size, GFP_KERNEL);
-	if (!name) {
+	dev->name = kstrndup(user_dev->name, UINPUT_MAX_NAME_SIZE,
+			     GFP_KERNEL);
+	if (!dev->name) {
 		retval = -ENOMEM;
 		goto exit;
 	}
-	strlcpy(name, user_dev->name, size);
 
 	dev->id.bustype	= user_dev->id.bustype;
 	dev->id.vendor	= user_dev->id.vendor;
@@ -622,7 +616,6 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 	struct uinput_ff_upload ff_up;
 	struct uinput_ff_erase  ff_erase;
 	struct uinput_request   *req;
-	int                     length;
 	char			*phys;
 
 	retval = mutex_lock_interruptible(&udev->mutex);
@@ -689,24 +682,15 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 				retval = -EINVAL;
 				goto out;
 			}
-			length = strnlen_user(p, 1024);
-			if (length <= 0) {
-				retval = -EFAULT;
-				break;
+
+			phys = strndup_user(p, 1024);
+			if (IS_ERR(phys)) {
+				retval = PTR_ERR(phys);
+				goto out;
 			}
+
 			kfree(udev->dev->phys);
-			udev->dev->phys = phys = kmalloc(length, GFP_KERNEL);
-			if (!phys) {
-				retval = -ENOMEM;
-				break;
-			}
-			if (copy_from_user(phys, p, length)) {
-				udev->dev->phys = NULL;
-				kfree(phys);
-				retval = -EFAULT;
-				break;
-			}
-			phys[length - 1] = '\0';
+			udev->dev->phys = phys;
 			break;
 
 		case UI_BEGIN_FF_UPLOAD:
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c
deleted file mode 100644
index 64f1de7960c6..000000000000
--- a/drivers/input/misc/winbond-cir.c
+++ /dev/null
@@ -1,1608 +0,0 @@
-/*
- *  winbond-cir.c - Driver for the Consumer IR functionality of Winbond
- *                  SuperI/O chips.
- *
- *  Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but
- *  could probably support others (Winbond WEC102X, NatSemi, etc)
- *  with minor modifications.
- *
- *  Original Author: David Härdeman <david@hardeman.nu>
- *     Copyright (C) 2009 David Härdeman <david@hardeman.nu>
- *
- *  Dedicated to Matilda, my newborn daughter, without whose loving attention
- *  this driver would have been finished in half the time and with a fraction
- *  of the bugs.
- *
- *  Written using:
- *    o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel
- *    o NatSemi PC87338/PC97338 datasheet (for the serial port stuff)
- *    o DSDT dumps
- *
- *  Supported features:
- *    o RC6
- *    o Wake-On-CIR functionality
- *
- *  To do:
- *    o Test NEC and RC5
- *
- *  Left as an exercise for the reader:
- *    o Learning (I have neither the hardware, nor the need)
- *    o IR Transmit (ibid)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/pci_ids.h>
-#include <linux/io.h>
-#include <linux/bitrev.h>
-#include <linux/bitops.h>
-#include <linux/slab.h>
-
-#define DRVNAME "winbond-cir"
-
-/* CEIR Wake-Up Registers, relative to data->wbase                      */
-#define WBCIR_REG_WCEIR_CTL	0x03 /* CEIR Receiver Control		*/
-#define WBCIR_REG_WCEIR_STS	0x04 /* CEIR Receiver Status		*/
-#define WBCIR_REG_WCEIR_EV_EN	0x05 /* CEIR Receiver Event Enable	*/
-#define WBCIR_REG_WCEIR_CNTL	0x06 /* CEIR Receiver Counter Low	*/
-#define WBCIR_REG_WCEIR_CNTH	0x07 /* CEIR Receiver Counter High	*/
-#define WBCIR_REG_WCEIR_INDEX	0x08 /* CEIR Receiver Index		*/
-#define WBCIR_REG_WCEIR_DATA	0x09 /* CEIR Receiver Data		*/
-#define WBCIR_REG_WCEIR_CSL	0x0A /* CEIR Re. Compare Strlen		*/
-#define WBCIR_REG_WCEIR_CFG1	0x0B /* CEIR Re. Configuration 1	*/
-#define WBCIR_REG_WCEIR_CFG2	0x0C /* CEIR Re. Configuration 2	*/
-
-/* CEIR Enhanced Functionality Registers, relative to data->ebase       */
-#define WBCIR_REG_ECEIR_CTS	0x00 /* Enhanced IR Control Status	*/
-#define WBCIR_REG_ECEIR_CCTL	0x01 /* Infrared Counter Control	*/
-#define WBCIR_REG_ECEIR_CNT_LO	0x02 /* Infrared Counter LSB		*/
-#define WBCIR_REG_ECEIR_CNT_HI	0x03 /* Infrared Counter MSB		*/
-#define WBCIR_REG_ECEIR_IREM	0x04 /* Infrared Emitter Status		*/
-
-/* SP3 Banked Registers, relative to data->sbase                        */
-#define WBCIR_REG_SP3_BSR	0x03 /* Bank Select, all banks		*/
-				      /* Bank 0				*/
-#define WBCIR_REG_SP3_RXDATA	0x00 /* FIFO RX data (r)		*/
-#define WBCIR_REG_SP3_TXDATA	0x00 /* FIFO TX data (w)		*/
-#define WBCIR_REG_SP3_IER	0x01 /* Interrupt Enable		*/
-#define WBCIR_REG_SP3_EIR	0x02 /* Event Identification (r)	*/
-#define WBCIR_REG_SP3_FCR	0x02 /* FIFO Control (w)		*/
-#define WBCIR_REG_SP3_MCR	0x04 /* Mode Control			*/
-#define WBCIR_REG_SP3_LSR	0x05 /* Link Status			*/
-#define WBCIR_REG_SP3_MSR	0x06 /* Modem Status			*/
-#define WBCIR_REG_SP3_ASCR	0x07 /* Aux Status and Control		*/
-				      /* Bank 2				*/
-#define WBCIR_REG_SP3_BGDL	0x00 /* Baud Divisor LSB		*/
-#define WBCIR_REG_SP3_BGDH	0x01 /* Baud Divisor MSB		*/
-#define WBCIR_REG_SP3_EXCR1	0x02 /* Extended Control 1		*/
-#define WBCIR_REG_SP3_EXCR2	0x04 /* Extended Control 2		*/
-#define WBCIR_REG_SP3_TXFLV	0x06 /* TX FIFO Level			*/
-#define WBCIR_REG_SP3_RXFLV	0x07 /* RX FIFO Level			*/
-				      /* Bank 3				*/
-#define WBCIR_REG_SP3_MRID	0x00 /* Module Identification		*/
-#define WBCIR_REG_SP3_SH_LCR	0x01 /* LCR Shadow			*/
-#define WBCIR_REG_SP3_SH_FCR	0x02 /* FCR Shadow			*/
-				      /* Bank 4				*/
-#define WBCIR_REG_SP3_IRCR1	0x02 /* Infrared Control 1		*/
-				      /* Bank 5				*/
-#define WBCIR_REG_SP3_IRCR2	0x04 /* Infrared Control 2		*/
-				      /* Bank 6				*/
-#define WBCIR_REG_SP3_IRCR3	0x00 /* Infrared Control 3		*/
-#define WBCIR_REG_SP3_SIR_PW	0x02 /* SIR Pulse Width		*/
-				      /* Bank 7				*/
-#define WBCIR_REG_SP3_IRRXDC	0x00 /* IR RX Demod Control		*/
-#define WBCIR_REG_SP3_IRTXMC	0x01 /* IR TX Mod Control		*/
-#define WBCIR_REG_SP3_RCCFG	0x02 /* CEIR Config			*/
-#define WBCIR_REG_SP3_IRCFG1	0x04 /* Infrared Config 1		*/
-#define WBCIR_REG_SP3_IRCFG4	0x07 /* Infrared Config 4		*/
-
-/*
- * Magic values follow
- */
-
-/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_NONE		0x00
-/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_RX		0x01
-/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
-#define WBCIR_IRQ_ERR		0x04
-/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */
-#define WBCIR_LED_ENABLE	0x80
-/* RX data available bit for WBCIR_REG_SP3_LSR */
-#define WBCIR_RX_AVAIL		0x01
-/* RX disable bit for WBCIR_REG_SP3_ASCR */
-#define WBCIR_RX_DISABLE	0x20
-/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */
-#define WBCIR_EXT_ENABLE	0x01
-/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
-#define WBCIR_REGSEL_COMPARE	0x10
-/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
-#define WBCIR_REGSEL_MASK	0x20
-/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */
-#define WBCIR_REG_ADDR0		0x00
-
-/* Valid banks for the SP3 UART */
-enum wbcir_bank {
-	WBCIR_BANK_0          = 0x00,
-	WBCIR_BANK_1          = 0x80,
-	WBCIR_BANK_2          = 0xE0,
-	WBCIR_BANK_3          = 0xE4,
-	WBCIR_BANK_4          = 0xE8,
-	WBCIR_BANK_5          = 0xEC,
-	WBCIR_BANK_6          = 0xF0,
-	WBCIR_BANK_7          = 0xF4,
-};
-
-/* Supported IR Protocols */
-enum wbcir_protocol {
-	IR_PROTOCOL_RC5          = 0x0,
-	IR_PROTOCOL_NEC          = 0x1,
-	IR_PROTOCOL_RC6          = 0x2,
-};
-
-/* Misc */
-#define WBCIR_NAME	"Winbond CIR"
-#define WBCIR_ID_FAMILY          0xF1 /* Family ID for the WPCD376I	*/
-#define	WBCIR_ID_CHIP            0x04 /* Chip ID for the WPCD376I	*/
-#define IR_KEYPRESS_TIMEOUT       250 /* FIXME: should be per-protocol? */
-#define INVALID_SCANCODE   0x7FFFFFFF /* Invalid with all protos	*/
-#define WAKEUP_IOMEM_LEN         0x10 /* Wake-Up I/O Reg Len		*/
-#define EHFUNC_IOMEM_LEN         0x10 /* Enhanced Func I/O Reg Len	*/
-#define SP_IOMEM_LEN             0x08 /* Serial Port 3 (IR) Reg Len	*/
-#define WBCIR_MAX_IDLE_BYTES       10
-
-static DEFINE_SPINLOCK(wbcir_lock);
-static DEFINE_RWLOCK(keytable_lock);
-
-struct wbcir_key {
-	u32 scancode;
-	unsigned int keycode;
-};
-
-struct wbcir_keyentry {
-	struct wbcir_key key;
-	struct list_head list;
-};
-
-static struct wbcir_key rc6_def_keymap[] = {
-	{ 0x800F0400, KEY_NUMERIC_0		},
-	{ 0x800F0401, KEY_NUMERIC_1		},
-	{ 0x800F0402, KEY_NUMERIC_2		},
-	{ 0x800F0403, KEY_NUMERIC_3		},
-	{ 0x800F0404, KEY_NUMERIC_4		},
-	{ 0x800F0405, KEY_NUMERIC_5		},
-	{ 0x800F0406, KEY_NUMERIC_6		},
-	{ 0x800F0407, KEY_NUMERIC_7		},
-	{ 0x800F0408, KEY_NUMERIC_8		},
-	{ 0x800F0409, KEY_NUMERIC_9		},
-	{ 0x800F041D, KEY_NUMERIC_STAR		},
-	{ 0x800F041C, KEY_NUMERIC_POUND		},
-	{ 0x800F0410, KEY_VOLUMEUP		},
-	{ 0x800F0411, KEY_VOLUMEDOWN		},
-	{ 0x800F0412, KEY_CHANNELUP		},
-	{ 0x800F0413, KEY_CHANNELDOWN		},
-	{ 0x800F040E, KEY_MUTE			},
-	{ 0x800F040D, KEY_VENDOR		}, /* Vista Logo Key */
-	{ 0x800F041E, KEY_UP			},
-	{ 0x800F041F, KEY_DOWN			},
-	{ 0x800F0420, KEY_LEFT			},
-	{ 0x800F0421, KEY_RIGHT			},
-	{ 0x800F0422, KEY_OK			},
-	{ 0x800F0423, KEY_ESC			},
-	{ 0x800F040F, KEY_INFO			},
-	{ 0x800F040A, KEY_CLEAR			},
-	{ 0x800F040B, KEY_ENTER			},
-	{ 0x800F045B, KEY_RED			},
-	{ 0x800F045C, KEY_GREEN			},
-	{ 0x800F045D, KEY_YELLOW		},
-	{ 0x800F045E, KEY_BLUE			},
-	{ 0x800F045A, KEY_TEXT			},
-	{ 0x800F0427, KEY_SWITCHVIDEOMODE	},
-	{ 0x800F040C, KEY_POWER			},
-	{ 0x800F0450, KEY_RADIO			},
-	{ 0x800F0448, KEY_PVR			},
-	{ 0x800F0447, KEY_AUDIO			},
-	{ 0x800F0426, KEY_EPG			},
-	{ 0x800F0449, KEY_CAMERA		},
-	{ 0x800F0425, KEY_TV			},
-	{ 0x800F044A, KEY_VIDEO			},
-	{ 0x800F0424, KEY_DVD			},
-	{ 0x800F0416, KEY_PLAY			},
-	{ 0x800F0418, KEY_PAUSE			},
-	{ 0x800F0419, KEY_STOP			},
-	{ 0x800F0414, KEY_FASTFORWARD		},
-	{ 0x800F041A, KEY_NEXT			},
-	{ 0x800F041B, KEY_PREVIOUS		},
-	{ 0x800F0415, KEY_REWIND		},
-	{ 0x800F0417, KEY_RECORD		},
-};
-
-/* Registers and other state is protected by wbcir_lock */
-struct wbcir_data {
-	unsigned long wbase;        /* Wake-Up Baseaddr		*/
-	unsigned long ebase;        /* Enhanced Func. Baseaddr	*/
-	unsigned long sbase;        /* Serial Port Baseaddr	*/
-	unsigned int  irq;          /* Serial Port IRQ		*/
-
-	struct input_dev *input_dev;
-	struct timer_list timer_keyup;
-	struct led_trigger *rxtrigger;
-	struct led_trigger *txtrigger;
-	struct led_classdev led;
-
-	u32 last_scancode;
-	unsigned int last_keycode;
-	u8 last_toggle;
-	u8 keypressed;
-	unsigned long keyup_jiffies;
-	unsigned int idle_count;
-
-	/* RX irdata and parsing state */
-	unsigned long irdata[30];
-	unsigned int irdata_count;
-	unsigned int irdata_idle;
-	unsigned int irdata_off;
-	unsigned int irdata_error;
-
-	/* Protected by keytable_lock */
-	struct list_head keytable;
-};
-
-static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
-module_param(protocol, uint, 0444);
-MODULE_PARM_DESC(protocol, "IR protocol to use "
-		 "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
-
-static int invert; /* default = 0 */
-module_param(invert, bool, 0444);
-MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
-
-static unsigned int wake_sc = 0x800F040C;
-module_param(wake_sc, uint, 0644);
-MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
-
-static unsigned int wake_rc6mode = 6;
-module_param(wake_rc6mode, uint, 0644);
-MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
-		 "(0 = 0, 6 = 6A, default)");
-
-
-
-/*****************************************************************************
- *
- * UTILITY FUNCTIONS
- *
- *****************************************************************************/
-
-/* Caller needs to hold wbcir_lock */
-static void
-wbcir_set_bits(unsigned long addr, u8 bits, u8 mask)
-{
-	u8 val;
-
-	val = inb(addr);
-	val = ((val & ~mask) | (bits & mask));
-	outb(val, addr);
-}
-
-/* Selects the register bank for the serial port */
-static inline void
-wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank)
-{
-	outb(bank, data->sbase + WBCIR_REG_SP3_BSR);
-}
-
-static enum led_brightness
-wbcir_led_brightness_get(struct led_classdev *led_cdev)
-{
-	struct wbcir_data *data = container_of(led_cdev,
-					       struct wbcir_data,
-					       led);
-
-	if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE)
-		return LED_FULL;
-	else
-		return LED_OFF;
-}
-
-static void
-wbcir_led_brightness_set(struct led_classdev *led_cdev,
-			    enum led_brightness brightness)
-{
-	struct wbcir_data *data = container_of(led_cdev,
-					       struct wbcir_data,
-					       led);
-
-	wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS,
-		       brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE,
-		       WBCIR_LED_ENABLE);
-}
-
-/* Manchester encodes bits to RC6 message cells (see wbcir_parse_rc6) */
-static u8
-wbcir_to_rc6cells(u8 val)
-{
-	u8 coded = 0x00;
-	int i;
-
-	val &= 0x0F;
-	for (i = 0; i < 4; i++) {
-		if (val & 0x01)
-			coded |= 0x02 << (i * 2);
-		else
-			coded |= 0x01 << (i * 2);
-		val >>= 1;
-	}
-
-	return coded;
-}
-
-
-
-/*****************************************************************************
- *
- * INPUT FUNCTIONS
- *
- *****************************************************************************/
-
-static unsigned int
-wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
-{
-	struct wbcir_keyentry *keyentry;
-	unsigned int keycode = KEY_RESERVED;
-	unsigned long flags;
-
-	read_lock_irqsave(&keytable_lock, flags);
-
-	list_for_each_entry(keyentry, &data->keytable, list) {
-		if (keyentry->key.scancode == scancode) {
-			keycode = keyentry->key.keycode;
-			break;
-		}
-	}
-
-	read_unlock_irqrestore(&keytable_lock, flags);
-	return keycode;
-}
-
-static int
-wbcir_getkeycode(struct input_dev *dev,
-		 unsigned int scancode, unsigned int *keycode)
-{
-	struct wbcir_data *data = input_get_drvdata(dev);
-
-	*keycode = wbcir_do_getkeycode(data, scancode);
-	return 0;
-}
-
-static int
-wbcir_setkeycode(struct input_dev *dev,
-		 unsigned int scancode, unsigned int keycode)
-{
-	struct wbcir_data *data = input_get_drvdata(dev);
-	struct wbcir_keyentry *keyentry;
-	struct wbcir_keyentry *new_keyentry;
-	unsigned long flags;
-	unsigned int old_keycode = KEY_RESERVED;
-
-	new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
-	if (!new_keyentry)
-		return -ENOMEM;
-
-	write_lock_irqsave(&keytable_lock, flags);
-
-	list_for_each_entry(keyentry, &data->keytable, list) {
-		if (keyentry->key.scancode != scancode)
-			continue;
-
-		old_keycode = keyentry->key.keycode;
-		keyentry->key.keycode = keycode;
-
-		if (keyentry->key.keycode == KEY_RESERVED) {
-			list_del(&keyentry->list);
-			kfree(keyentry);
-		}
-
-		break;
-	}
-
-	set_bit(keycode, dev->keybit);
-
-	if (old_keycode == KEY_RESERVED) {
-		new_keyentry->key.scancode = scancode;
-		new_keyentry->key.keycode = keycode;
-		list_add(&new_keyentry->list, &data->keytable);
-	} else {
-		kfree(new_keyentry);
-		clear_bit(old_keycode, dev->keybit);
-		list_for_each_entry(keyentry, &data->keytable, list) {
-			if (keyentry->key.keycode == old_keycode) {
-				set_bit(old_keycode, dev->keybit);
-				break;
-			}
-		}
-	}
-
-	write_unlock_irqrestore(&keytable_lock, flags);
-	return 0;
-}
-
-/*
- * Timer function to report keyup event some time after keydown is
- * reported by the ISR.
- */
-static void
-wbcir_keyup(unsigned long cookie)
-{
-	struct wbcir_data *data = (struct wbcir_data *)cookie;
-	unsigned long flags;
-
-	/*
-	 * data->keyup_jiffies is used to prevent a race condition if a
-	 * hardware interrupt occurs at this point and the keyup timer
-	 * event is moved further into the future as a result.
-	 *
-	 * The timer will then be reactivated and this function called
-	 * again in the future. We need to exit gracefully in that case
-	 * to allow the input subsystem to do its auto-repeat magic or
-	 * a keyup event might follow immediately after the keydown.
-	 */
-
-	spin_lock_irqsave(&wbcir_lock, flags);
-
-	if (time_is_after_eq_jiffies(data->keyup_jiffies) && data->keypressed) {
-		data->keypressed = 0;
-		led_trigger_event(data->rxtrigger, LED_OFF);
-		input_report_key(data->input_dev, data->last_keycode, 0);
-		input_sync(data->input_dev);
-	}
-
-	spin_unlock_irqrestore(&wbcir_lock, flags);
-}
-
-static void
-wbcir_keydown(struct wbcir_data *data, u32 scancode, u8 toggle)
-{
-	unsigned int keycode;
-
-	/* Repeat? */
-	if (data->last_scancode == scancode &&
-	    data->last_toggle == toggle &&
-	    data->keypressed)
-		goto set_timer;
-	data->last_scancode = scancode;
-
-	/* Do we need to release an old keypress? */
-	if (data->keypressed) {
-		input_report_key(data->input_dev, data->last_keycode, 0);
-		input_sync(data->input_dev);
-		data->keypressed = 0;
-	}
-
-	/* Report scancode */
-	input_event(data->input_dev, EV_MSC, MSC_SCAN, (int)scancode);
-
-	/* Do we know this scancode? */
-	keycode = wbcir_do_getkeycode(data, scancode);
-	if (keycode == KEY_RESERVED)
-		goto set_timer;
-
-	/* Register a keypress */
-	input_report_key(data->input_dev, keycode, 1);
-	data->keypressed = 1;
-	data->last_keycode = keycode;
-	data->last_toggle = toggle;
-
-set_timer:
-	input_sync(data->input_dev);
-	led_trigger_event(data->rxtrigger,
-			  data->keypressed ? LED_FULL : LED_OFF);
-	data->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&data->timer_keyup, data->keyup_jiffies);
-}
-
-
-
-/*****************************************************************************
- *
- * IR PARSING FUNCTIONS
- *
- *****************************************************************************/
-
-/* Resets all irdata */
-static void
-wbcir_reset_irdata(struct wbcir_data *data)
-{
-	memset(data->irdata, 0, sizeof(data->irdata));
-	data->irdata_count = 0;
-	data->irdata_off = 0;
-	data->irdata_error = 0;
-	data->idle_count = 0;
-}
-
-/* Adds one bit of irdata */
-static void
-add_irdata_bit(struct wbcir_data *data, int set)
-{
-	if (data->irdata_count >= sizeof(data->irdata) * 8) {
-		data->irdata_error = 1;
-		return;
-	}
-
-	if (set)
-		__set_bit(data->irdata_count, data->irdata);
-	data->irdata_count++;
-}
-
-/* Gets count bits of irdata */
-static u16
-get_bits(struct wbcir_data *data, int count)
-{
-	u16 val = 0x0;
-
-	if (data->irdata_count - data->irdata_off < count) {
-		data->irdata_error = 1;
-		return 0x0;
-	}
-
-	while (count > 0) {
-		val <<= 1;
-		if (test_bit(data->irdata_off, data->irdata))
-			val |= 0x1;
-		count--;
-		data->irdata_off++;
-	}
-
-	return val;
-}
-
-/* Reads 16 cells and converts them to a byte */
-static u8
-wbcir_rc6cells_to_byte(struct wbcir_data *data)
-{
-	u16 raw = get_bits(data, 16);
-	u8 val = 0x00;
-	int bit;
-
-	for (bit = 0; bit < 8; bit++) {
-		switch (raw & 0x03) {
-		case 0x01:
-			break;
-		case 0x02:
-			val |= (0x01 << bit);
-			break;
-		default:
-			data->irdata_error = 1;
-			break;
-		}
-		raw >>= 2;
-	}
-
-	return val;
-}
-
-/* Decodes a number of bits from raw RC5 data */
-static u8
-wbcir_get_rc5bits(struct wbcir_data *data, unsigned int count)
-{
-	u16 raw = get_bits(data, count * 2);
-	u8 val = 0x00;
-	int bit;
-
-	for (bit = 0; bit < count; bit++) {
-		switch (raw & 0x03) {
-		case 0x01:
-			val |= (0x01 << bit);
-			break;
-		case 0x02:
-			break;
-		default:
-			data->irdata_error = 1;
-			break;
-		}
-		raw >>= 2;
-	}
-
-	return val;
-}
-
-static void
-wbcir_parse_rc6(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Normal bits are manchester coded as follows:
-	 * cell0 + cell1 = logic "0"
-	 * cell1 + cell0 = logic "1"
-	 *
-	 * The IR pulse has the following components:
-	 *
-	 * Leader		- 6 * cell1 - discarded
-	 * Gap    		- 2 * cell0 - discarded
-	 * Start bit		- Normal Coding - always "1"
-	 * Mode Bit 2 - 0	- Normal Coding
-	 * Toggle bit		- Normal Coding with double bit time,
-	 *			  e.g. cell0 + cell0 + cell1 + cell1
-	 *			  means logic "0".
-	 *
-	 * The rest depends on the mode, the following modes are known:
-	 *
-	 * MODE 0:
-	 *  Address Bit 7 - 0	- Normal Coding
-	 *  Command Bit 7 - 0	- Normal Coding
-	 *
-	 * MODE 6:
-	 *  The above Toggle Bit is used as a submode bit, 0 = A, 1 = B.
-	 *  Submode B is for pointing devices, only remotes using submode A
-	 *  are supported.
-	 *
-	 *  Customer range bit	- 0 => Customer = 7 bits, 0...127
-	 *                        1 => Customer = 15 bits, 32768...65535
-	 *  Customer Bits	- Normal Coding
-	 *
-	 *  Customer codes are allocated by Philips. The rest of the bits
-	 *  are customer dependent. The following is commonly used (and the
-	 *  only supported config):
-	 *
-	 *  Toggle Bit		- Normal Coding
-	 *  Address Bit 6 - 0	- Normal Coding
-	 *  Command Bit 7 - 0	- Normal Coding
-	 *
-	 * All modes are followed by at least 6 * cell0.
-	 *
-	 * MODE 0 msglen:
-	 *  1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (toggle) +
-	 *  8 * 2 (address) + 8 * 2 (command) =
-	 *  44 cells
-	 *
-	 * MODE 6A msglen:
-	 *  1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (submode) +
-	 *  1 * 2 (customer range bit) + 7/15 * 2 (customer bits) +
-	 *  1 * 2 (toggle bit) + 7 * 2 (address) + 8 * 2 (command) =
-	 *  60 - 76 cells
-	 */
-	u8 mode;
-	u8 toggle;
-	u16 customer = 0x0;
-	u8 address;
-	u8 command;
-	u32 scancode;
-
-	/* Leader mark */
-	while (get_bits(data, 1) && !data->irdata_error)
-		/* Do nothing */;
-
-	/* Leader space */
-	if (get_bits(data, 1)) {
-		dev_dbg(dev, "RC6 - Invalid leader space\n");
-		return;
-	}
-
-	/* Start bit */
-	if (get_bits(data, 2) != 0x02) {
-		dev_dbg(dev, "RC6 - Invalid start bit\n");
-		return;
-	}
-
-	/* Mode */
-	mode = get_bits(data, 6);
-	switch (mode) {
-	case 0x15: /* 010101 = b000 */
-		mode = 0;
-		break;
-	case 0x29: /* 101001 = b110 */
-		mode = 6;
-		break;
-	default:
-		dev_dbg(dev, "RC6 - Invalid mode\n");
-		return;
-	}
-
-	/* Toggle bit / Submode bit */
-	toggle = get_bits(data, 4);
-	switch (toggle) {
-	case 0x03:
-		toggle = 0;
-		break;
-	case 0x0C:
-		toggle = 1;
-		break;
-	default:
-		dev_dbg(dev, "RC6 - Toggle bit error\n");
-		break;
-	}
-
-	/* Customer */
-	if (mode == 6) {
-		if (toggle != 0) {
-			dev_dbg(dev, "RC6B - Not Supported\n");
-			return;
-		}
-
-		customer = wbcir_rc6cells_to_byte(data);
-
-		if (customer & 0x80) {
-			/* 15 bit customer value */
-			customer <<= 8;
-			customer |= wbcir_rc6cells_to_byte(data);
-		}
-	}
-
-	/* Address */
-	address = wbcir_rc6cells_to_byte(data);
-	if (mode == 6) {
-		toggle = address >> 7;
-		address &= 0x7F;
-	}
-
-	/* Command */
-	command = wbcir_rc6cells_to_byte(data);
-
-	/* Create scancode */
-	scancode =  command;
-	scancode |= address << 8;
-	scancode |= customer << 16;
-
-	/* Last sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "RC6 - Cell error(s)\n");
-		return;
-	}
-
-	dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
-		"toggle %u mode %u scan 0x%08X\n",
-		address,
-		command,
-		customer,
-		(unsigned int)toggle,
-		(unsigned int)mode,
-		scancode);
-
-	wbcir_keydown(data, scancode, toggle);
-}
-
-static void
-wbcir_parse_rc5(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Bits are manchester coded as follows:
-	 * cell1 + cell0 = logic "0"
-	 * cell0 + cell1 = logic "1"
-	 * (i.e. the reverse of RC6)
-	 *
-	 * Start bit 1		- "1" - discarded
-	 * Start bit 2		- Must be inverted to get command bit 6
-	 * Toggle bit
-	 * Address Bit 4 - 0
-	 * Command Bit 5 - 0
-	 */
-	u8 toggle;
-	u8 address;
-	u8 command;
-	u32 scancode;
-
-	/* Start bit 1 */
-	if (!get_bits(data, 1)) {
-		dev_dbg(dev, "RC5 - Invalid start bit\n");
-		return;
-	}
-
-	/* Start bit 2 */
-	if (!wbcir_get_rc5bits(data, 1))
-		command = 0x40;
-	else
-		command = 0x00;
-
-	toggle   = wbcir_get_rc5bits(data, 1);
-	address  = wbcir_get_rc5bits(data, 5);
-	command |= wbcir_get_rc5bits(data, 6);
-	scancode = address << 7 | command;
-
-	/* Last sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "RC5 - Invalid message\n");
-		return;
-	}
-
-	dev_dbg(dev, "IR-RC5 ad %u cm %u t %u s %u\n",
-		(unsigned int)address,
-		(unsigned int)command,
-		(unsigned int)toggle,
-		(unsigned int)scancode);
-
-	wbcir_keydown(data, scancode, toggle);
-}
-
-static void
-wbcir_parse_nec(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Each bit represents 560 us.
-	 *
-	 * Leader		- 9 ms burst
-	 * Gap			- 4.5 ms silence
-	 * Address1 bit 0 - 7	- Address 1
-	 * Address2 bit 0 - 7	- Address 2
-	 * Command1 bit 0 - 7	- Command 1
-	 * Command2 bit 0 - 7	- Command 2
-	 *
-	 * Note the bit order!
-	 *
-	 * With the old NEC protocol, Address2 was the inverse of Address1
-	 * and Command2 was the inverse of Command1 and were used as
-	 * an error check.
-	 *
-	 * With NEC extended, Address1 is the LSB of the Address and
-	 * Address2 is the MSB, Command parsing remains unchanged.
-	 *
-	 * A repeat message is coded as:
-	 * Leader		- 9 ms burst
-	 * Gap			- 2.25 ms silence
-	 * Repeat		- 560 us active
-	 */
-	u8 address1;
-	u8 address2;
-	u8 command1;
-	u8 command2;
-	u16 address;
-	u32 scancode;
-
-	/* Leader mark */
-	while (get_bits(data, 1) && !data->irdata_error)
-		/* Do nothing */;
-
-	/* Leader space */
-	if (get_bits(data, 4)) {
-		dev_dbg(dev, "NEC - Invalid leader space\n");
-		return;
-	}
-
-	/* Repeat? */
-	if (get_bits(data, 1)) {
-		if (!data->keypressed) {
-			dev_dbg(dev, "NEC - Stray repeat message\n");
-			return;
-		}
-
-		dev_dbg(dev, "IR-NEC repeat s %u\n",
-			(unsigned int)data->last_scancode);
-
-		wbcir_keydown(data, data->last_scancode, data->last_toggle);
-		return;
-	}
-
-	/* Remaining leader space */
-	if (get_bits(data, 3)) {
-		dev_dbg(dev, "NEC - Invalid leader space\n");
-		return;
-	}
-
-	address1  = bitrev8(get_bits(data, 8));
-	address2  = bitrev8(get_bits(data, 8));
-	command1  = bitrev8(get_bits(data, 8));
-	command2  = bitrev8(get_bits(data, 8));
-
-	/* Sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "NEC - Invalid message\n");
-		return;
-	}
-
-	/* Check command validity */
-	if (command1 != ~command2) {
-		dev_dbg(dev, "NEC - Command bytes mismatch\n");
-		return;
-	}
-
-	/* Check for extended NEC protocol */
-	address = address1;
-	if (address1 != ~address2)
-		address |= address2 << 8;
-
-	scancode = address << 8 | command1;
-
-	dev_dbg(dev, "IR-NEC ad %u cm %u s %u\n",
-		(unsigned int)address,
-		(unsigned int)command1,
-		(unsigned int)scancode);
-
-	wbcir_keydown(data, scancode, !data->last_toggle);
-}
-
-
-
-/*****************************************************************************
- *
- * INTERRUPT FUNCTIONS
- *
- *****************************************************************************/
-
-static irqreturn_t
-wbcir_irq_handler(int irqno, void *cookie)
-{
-	struct pnp_dev *device = cookie;
-	struct wbcir_data *data = pnp_get_drvdata(device);
-	struct device *dev = &device->dev;
-	u8 status;
-	unsigned long flags;
-	u8 irdata[8];
-	int i;
-	unsigned int hw;
-
-	spin_lock_irqsave(&wbcir_lock, flags);
-
-	wbcir_select_bank(data, WBCIR_BANK_0);
-
-	status = inb(data->sbase + WBCIR_REG_SP3_EIR);
-
-	if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
-		spin_unlock_irqrestore(&wbcir_lock, flags);
-		return IRQ_NONE;
-	}
-
-	if (status & WBCIR_IRQ_ERR)
-		data->irdata_error = 1;
-
-	if (!(status & WBCIR_IRQ_RX))
-		goto out;
-
-	/* Since RXHDLEV is set, at least 8 bytes are in the FIFO */
-	insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8);
-
-	for (i = 0; i < sizeof(irdata); i++) {
-		hw = hweight8(irdata[i]);
-		if (hw > 4)
-			add_irdata_bit(data, 0);
-		else
-			add_irdata_bit(data, 1);
-
-		if (hw == 8)
-			data->idle_count++;
-		else
-			data->idle_count = 0;
-	}
-
-	if (data->idle_count > WBCIR_MAX_IDLE_BYTES) {
-		/* Set RXINACTIVE... */
-		outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR);
-
-		/* ...and drain the FIFO */
-		while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL)
-			inb(data->sbase + WBCIR_REG_SP3_RXDATA);
-
-		dev_dbg(dev, "IRDATA:\n");
-		for (i = 0; i < data->irdata_count; i += BITS_PER_LONG)
-			dev_dbg(dev, "0x%08lX\n", data->irdata[i/BITS_PER_LONG]);
-
-		switch (protocol) {
-		case IR_PROTOCOL_RC5:
-			wbcir_parse_rc5(dev, data);
-			break;
-		case IR_PROTOCOL_RC6:
-			wbcir_parse_rc6(dev, data);
-			break;
-		case IR_PROTOCOL_NEC:
-			wbcir_parse_nec(dev, data);
-			break;
-		}
-
-		wbcir_reset_irdata(data);
-	}
-
-out:
-	spin_unlock_irqrestore(&wbcir_lock, flags);
-	return IRQ_HANDLED;
-}
-
-
-
-/*****************************************************************************
- *
- * SETUP/INIT/SUSPEND/RESUME FUNCTIONS
- *
- *****************************************************************************/
-
-static void
-wbcir_shutdown(struct pnp_dev *device)
-{
-	struct device *dev = &device->dev;
-	struct wbcir_data *data = pnp_get_drvdata(device);
-	int do_wake = 1;
-	u8 match[11];
-	u8 mask[11];
-	u8 rc6_csl = 0;
-	int i;
-
-	memset(match, 0, sizeof(match));
-	memset(mask, 0, sizeof(mask));
-
-	if (wake_sc == INVALID_SCANCODE || !device_may_wakeup(dev)) {
-		do_wake = 0;
-		goto finish;
-	}
-
-	switch (protocol) {
-	case IR_PROTOCOL_RC5:
-		if (wake_sc > 0xFFF) {
-			do_wake = 0;
-			dev_err(dev, "RC5 - Invalid wake scancode\n");
-			break;
-		}
-
-		/* Mask = 13 bits, ex toggle */
-		mask[0] = 0xFF;
-		mask[1] = 0x17;
-
-		match[0]  = (wake_sc & 0x003F);      /* 6 command bits */
-		match[0] |= (wake_sc & 0x0180) >> 1; /* 2 address bits */
-		match[1]  = (wake_sc & 0x0E00) >> 9; /* 3 address bits */
-		if (!(wake_sc & 0x0040))             /* 2nd start bit  */
-			match[1] |= 0x10;
-
-		break;
-
-	case IR_PROTOCOL_NEC:
-		if (wake_sc > 0xFFFFFF) {
-			do_wake = 0;
-			dev_err(dev, "NEC - Invalid wake scancode\n");
-			break;
-		}
-
-		mask[0] = mask[1] = mask[2] = mask[3] = 0xFF;
-
-		match[1] = bitrev8((wake_sc & 0xFF));
-		match[0] = ~match[1];
-
-		match[3] = bitrev8((wake_sc & 0xFF00) >> 8);
-		if (wake_sc > 0xFFFF)
-			match[2] = bitrev8((wake_sc & 0xFF0000) >> 16);
-		else
-			match[2] = ~match[3];
-
-		break;
-
-	case IR_PROTOCOL_RC6:
-
-		if (wake_rc6mode == 0) {
-			if (wake_sc > 0xFFFF) {
-				do_wake = 0;
-				dev_err(dev, "RC6 - Invalid wake scancode\n");
-				break;
-			}
-
-			/* Command */
-			match[0] = wbcir_to_rc6cells(wake_sc >>  0);
-			mask[0]  = 0xFF;
-			match[1] = wbcir_to_rc6cells(wake_sc >>  4);
-			mask[1]  = 0xFF;
-
-			/* Address */
-			match[2] = wbcir_to_rc6cells(wake_sc >>  8);
-			mask[2]  = 0xFF;
-			match[3] = wbcir_to_rc6cells(wake_sc >> 12);
-			mask[3]  = 0xFF;
-
-			/* Header */
-			match[4] = 0x50; /* mode1 = mode0 = 0, ignore toggle */
-			mask[4]  = 0xF0;
-			match[5] = 0x09; /* start bit = 1, mode2 = 0 */
-			mask[5]  = 0x0F;
-
-			rc6_csl = 44;
-
-		} else if (wake_rc6mode == 6) {
-			i = 0;
-
-			/* Command */
-			match[i]  = wbcir_to_rc6cells(wake_sc >>  0);
-			mask[i++] = 0xFF;
-			match[i]  = wbcir_to_rc6cells(wake_sc >>  4);
-			mask[i++] = 0xFF;
-
-			/* Address + Toggle */
-			match[i]  = wbcir_to_rc6cells(wake_sc >>  8);
-			mask[i++] = 0xFF;
-			match[i]  = wbcir_to_rc6cells(wake_sc >> 12);
-			mask[i++] = 0x3F;
-
-			/* Customer bits 7 - 0 */
-			match[i]  = wbcir_to_rc6cells(wake_sc >> 16);
-			mask[i++] = 0xFF;
-			match[i]  = wbcir_to_rc6cells(wake_sc >> 20);
-			mask[i++] = 0xFF;
-
-			if (wake_sc & 0x80000000) {
-				/* Customer range bit and bits 15 - 8 */
-				match[i]  = wbcir_to_rc6cells(wake_sc >> 24);
-				mask[i++] = 0xFF;
-				match[i]  = wbcir_to_rc6cells(wake_sc >> 28);
-				mask[i++] = 0xFF;
-				rc6_csl = 76;
-			} else if (wake_sc <= 0x007FFFFF) {
-				rc6_csl = 60;
-			} else {
-				do_wake = 0;
-				dev_err(dev, "RC6 - Invalid wake scancode\n");
-				break;
-			}
-
-			/* Header */
-			match[i]  = 0x93; /* mode1 = mode0 = 1, submode = 0 */
-			mask[i++] = 0xFF;
-			match[i]  = 0x0A; /* start bit = 1, mode2 = 1 */
-			mask[i++] = 0x0F;
-
-		} else {
-			do_wake = 0;
-			dev_err(dev, "RC6 - Invalid wake mode\n");
-		}
-
-		break;
-
-	default:
-		do_wake = 0;
-		break;
-	}
-
-finish:
-	if (do_wake) {
-		/* Set compare and compare mask */
-		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
-			       WBCIR_REGSEL_COMPARE | WBCIR_REG_ADDR0,
-			       0x3F);
-		outsb(data->wbase + WBCIR_REG_WCEIR_DATA, match, 11);
-		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
-			       WBCIR_REGSEL_MASK | WBCIR_REG_ADDR0,
-			       0x3F);
-		outsb(data->wbase + WBCIR_REG_WCEIR_DATA, mask, 11);
-
-		/* RC6 Compare String Len */
-		outb(rc6_csl, data->wbase + WBCIR_REG_WCEIR_CSL);
-
-		/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
-		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
-
-		/* Clear BUFF_EN, Clear END_EN, Set MATCH_EN */
-		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x01, 0x07);
-
-		/* Set CEIR_EN */
-		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x01, 0x01);
-
-	} else {
-		/* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
-		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
-
-		/* Clear CEIR_EN */
-		wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
-	}
-
-	/* Disable interrupts */
-	wbcir_select_bank(data, WBCIR_BANK_0);
-	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
-
-	/*
-	 * ACPI will set the HW disable bit for SP3 which means that the
-	 * output signals are left in an undefined state which may cause
-	 * spurious interrupts which we need to ignore until the hardware
-	 * is reinitialized.
-	 */
-	disable_irq(data->irq);
-}
-
-static int
-wbcir_suspend(struct pnp_dev *device, pm_message_t state)
-{
-	wbcir_shutdown(device);
-	return 0;
-}
-
-static void
-wbcir_init_hw(struct wbcir_data *data)
-{
-	u8 tmp;
-
-	/* Disable interrupts */
-	wbcir_select_bank(data, WBCIR_BANK_0);
-	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
-
-	/* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
-	tmp = protocol << 4;
-	if (invert)
-		tmp |= 0x08;
-	outb(tmp, data->wbase + WBCIR_REG_WCEIR_CTL);
-
-	/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
-	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
-
-	/* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
-	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
-
-	/* Set RC5 cell time to correspond to 36 kHz */
-	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CFG1, 0x4A, 0x7F);
-
-	/* Set IRTX_INV */
-	if (invert)
-		outb(0x04, data->ebase + WBCIR_REG_ECEIR_CCTL);
-	else
-		outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL);
-
-	/*
-	 * Clear IR LED, set SP3 clock to 24Mhz
-	 * set SP3_IRRX_SW to binary 01, helpfully not documented
-	 */
-	outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
-
-	/* Enable extended mode */
-	wbcir_select_bank(data, WBCIR_BANK_2);
-	outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
-
-	/*
-	 * Configure baud generator, IR data will be sampled at
-	 * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
-	 *
-	 * The ECIR registers include a flag to change the
-	 * 24Mhz clock freq to 48Mhz.
-	 *
-	 * It's not documented in the specs, but fifo levels
-	 * other than 16 seems to be unsupported.
-	 */
-
-	/* prescaler 1.0, tx/rx fifo lvl 16 */
-	outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
-
-	/* Set baud divisor to generate one byte per bit/cell */
-	switch (protocol) {
-	case IR_PROTOCOL_RC5:
-		outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	case IR_PROTOCOL_RC6:
-		outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	case IR_PROTOCOL_NEC:
-		outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	}
-	outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
-
-	/* Set CEIR mode */
-	wbcir_select_bank(data, WBCIR_BANK_0);
-	outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
-	inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
-	inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
-
-	/* Disable RX demod, run-length encoding/decoding, set freq span */
-	wbcir_select_bank(data, WBCIR_BANK_7);
-	outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
-
-	/* Disable timer */
-	wbcir_select_bank(data, WBCIR_BANK_4);
-	outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
-
-	/* Enable MSR interrupt, Clear AUX_IRX */
-	wbcir_select_bank(data, WBCIR_BANK_5);
-	outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
-
-	/* Disable CRC */
-	wbcir_select_bank(data, WBCIR_BANK_6);
-	outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
-
-	/* Set RX/TX (de)modulation freq, not really used */
-	wbcir_select_bank(data, WBCIR_BANK_7);
-	outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
-	outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
-
-	/* Set invert and pin direction */
-	if (invert)
-		outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
-	else
-		outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
-
-	/* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */
-	wbcir_select_bank(data, WBCIR_BANK_0);
-	outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
-
-	/* Clear AUX status bits */
-	outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
-
-	/* Enable interrupts */
-	wbcir_reset_irdata(data);
-	outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
-}
-
-static int
-wbcir_resume(struct pnp_dev *device)
-{
-	struct wbcir_data *data = pnp_get_drvdata(device);
-
-	wbcir_init_hw(data);
-	enable_irq(data->irq);
-
-	return 0;
-}
-
-static int __devinit
-wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
-{
-	struct device *dev = &device->dev;
-	struct wbcir_data *data;
-	int err;
-
-	if (!(pnp_port_len(device, 0) == EHFUNC_IOMEM_LEN &&
-	      pnp_port_len(device, 1) == WAKEUP_IOMEM_LEN &&
-	      pnp_port_len(device, 2) == SP_IOMEM_LEN)) {
-		dev_err(dev, "Invalid resources\n");
-		return -ENODEV;
-	}
-
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	pnp_set_drvdata(device, data);
-
-	data->ebase = pnp_port_start(device, 0);
-	data->wbase = pnp_port_start(device, 1);
-	data->sbase = pnp_port_start(device, 2);
-	data->irq = pnp_irq(device, 0);
-
-	if (data->wbase == 0 || data->ebase == 0 ||
-	    data->sbase == 0 || data->irq == 0) {
-		err = -ENODEV;
-		dev_err(dev, "Invalid resources\n");
-		goto exit_free_data;
-	}
-
-	dev_dbg(&device->dev, "Found device "
-		"(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
-		data->wbase, data->ebase, data->sbase, data->irq);
-
-	if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
-		dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
-			data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1);
-		err = -EBUSY;
-		goto exit_free_data;
-	}
-
-	if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) {
-		dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
-			data->ebase, data->ebase + EHFUNC_IOMEM_LEN - 1);
-		err = -EBUSY;
-		goto exit_release_wbase;
-	}
-
-	if (!request_region(data->sbase, SP_IOMEM_LEN, DRVNAME)) {
-		dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
-			data->sbase, data->sbase + SP_IOMEM_LEN - 1);
-		err = -EBUSY;
-		goto exit_release_ebase;
-	}
-
-	err = request_irq(data->irq, wbcir_irq_handler,
-			  IRQF_DISABLED, DRVNAME, device);
-	if (err) {
-		dev_err(dev, "Failed to claim IRQ %u\n", data->irq);
-		err = -EBUSY;
-		goto exit_release_sbase;
-	}
-
-	led_trigger_register_simple("cir-tx", &data->txtrigger);
-	if (!data->txtrigger) {
-		err = -ENOMEM;
-		goto exit_free_irq;
-	}
-
-	led_trigger_register_simple("cir-rx", &data->rxtrigger);
-	if (!data->rxtrigger) {
-		err = -ENOMEM;
-		goto exit_unregister_txtrigger;
-	}
-
-	data->led.name = "cir::activity";
-	data->led.default_trigger = "cir-rx";
-	data->led.brightness_set = wbcir_led_brightness_set;
-	data->led.brightness_get = wbcir_led_brightness_get;
-	err = led_classdev_register(&device->dev, &data->led);
-	if (err)
-		goto exit_unregister_rxtrigger;
-
-	data->input_dev = input_allocate_device();
-	if (!data->input_dev) {
-		err = -ENOMEM;
-		goto exit_unregister_led;
-	}
-
-	data->input_dev->evbit[0] = BIT(EV_KEY);
-	data->input_dev->name = WBCIR_NAME;
-	data->input_dev->phys = "wbcir/cir0";
-	data->input_dev->id.bustype = BUS_HOST;
-	data->input_dev->id.vendor  = PCI_VENDOR_ID_WINBOND;
-	data->input_dev->id.product = WBCIR_ID_FAMILY;
-	data->input_dev->id.version = WBCIR_ID_CHIP;
-	data->input_dev->getkeycode = wbcir_getkeycode;
-	data->input_dev->setkeycode = wbcir_setkeycode;
-	input_set_capability(data->input_dev, EV_MSC, MSC_SCAN);
-	input_set_drvdata(data->input_dev, data);
-
-	err = input_register_device(data->input_dev);
-	if (err)
-		goto exit_free_input;
-
-	data->last_scancode = INVALID_SCANCODE;
-	INIT_LIST_HEAD(&data->keytable);
-	setup_timer(&data->timer_keyup, wbcir_keyup, (unsigned long)data);
-
-	/* Load default keymaps */
-	if (protocol == IR_PROTOCOL_RC6) {
-		int i;
-		for (i = 0; i < ARRAY_SIZE(rc6_def_keymap); i++) {
-			err = wbcir_setkeycode(data->input_dev,
-					       (int)rc6_def_keymap[i].scancode,
-					       (int)rc6_def_keymap[i].keycode);
-			if (err)
-				goto exit_unregister_keys;
-		}
-	}
-
-	device_init_wakeup(&device->dev, 1);
-
-	wbcir_init_hw(data);
-
-	return 0;
-
-exit_unregister_keys:
-	if (!list_empty(&data->keytable)) {
-		struct wbcir_keyentry *key;
-		struct wbcir_keyentry *keytmp;
-
-		list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
-			list_del(&key->list);
-			kfree(key);
-		}
-	}
-	input_unregister_device(data->input_dev);
-	/* Can't call input_free_device on an unregistered device */
-	data->input_dev = NULL;
-exit_free_input:
-	input_free_device(data->input_dev);
-exit_unregister_led:
-	led_classdev_unregister(&data->led);
-exit_unregister_rxtrigger:
-	led_trigger_unregister_simple(data->rxtrigger);
-exit_unregister_txtrigger:
-	led_trigger_unregister_simple(data->txtrigger);
-exit_free_irq:
-	free_irq(data->irq, device);
-exit_release_sbase:
-	release_region(data->sbase, SP_IOMEM_LEN);
-exit_release_ebase:
-	release_region(data->ebase, EHFUNC_IOMEM_LEN);
-exit_release_wbase:
-	release_region(data->wbase, WAKEUP_IOMEM_LEN);
-exit_free_data:
-	kfree(data);
-	pnp_set_drvdata(device, NULL);
-exit:
-	return err;
-}
-
-static void __devexit
-wbcir_remove(struct pnp_dev *device)
-{
-	struct wbcir_data *data = pnp_get_drvdata(device);
-	struct wbcir_keyentry *key;
-	struct wbcir_keyentry *keytmp;
-
-	/* Disable interrupts */
-	wbcir_select_bank(data, WBCIR_BANK_0);
-	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
-
-	del_timer_sync(&data->timer_keyup);
-
-	free_irq(data->irq, device);
-
-	/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
-	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
-
-	/* Clear CEIR_EN */
-	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
-
-	/* Clear BUFF_EN, END_EN, MATCH_EN */
-	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
-
-	/* This will generate a keyup event if necessary */
-	input_unregister_device(data->input_dev);
-
-	led_trigger_unregister_simple(data->rxtrigger);
-	led_trigger_unregister_simple(data->txtrigger);
-	led_classdev_unregister(&data->led);
-
-	/* This is ok since &data->led isn't actually used */
-	wbcir_led_brightness_set(&data->led, LED_OFF);
-
-	release_region(data->wbase, WAKEUP_IOMEM_LEN);
-	release_region(data->ebase, EHFUNC_IOMEM_LEN);
-	release_region(data->sbase, SP_IOMEM_LEN);
-
-	list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
-		list_del(&key->list);
-		kfree(key);
-	}
-
-	kfree(data);
-
-	pnp_set_drvdata(device, NULL);
-}
-
-static const struct pnp_device_id wbcir_ids[] = {
-	{ "WEC1022", 0 },
-	{ "", 0 }
-};
-MODULE_DEVICE_TABLE(pnp, wbcir_ids);
-
-static struct pnp_driver wbcir_driver = {
-	.name     = WBCIR_NAME,
-	.id_table = wbcir_ids,
-	.probe    = wbcir_probe,
-	.remove   = __devexit_p(wbcir_remove),
-	.suspend  = wbcir_suspend,
-	.resume   = wbcir_resume,
-	.shutdown = wbcir_shutdown
-};
-
-static int __init
-wbcir_init(void)
-{
-	int ret;
-
-	switch (protocol) {
-	case IR_PROTOCOL_RC5:
-	case IR_PROTOCOL_NEC:
-	case IR_PROTOCOL_RC6:
-		break;
-	default:
-		printk(KERN_ERR DRVNAME ": Invalid protocol argument\n");
-		return -EINVAL;
-	}
-
-	ret = pnp_register_driver(&wbcir_driver);
-	if (ret)
-		printk(KERN_ERR DRVNAME ": Unable to register driver\n");
-
-	return ret;
-}
-
-static void __exit
-wbcir_exit(void)
-{
-	pnp_unregister_driver(&wbcir_driver);
-}
-
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
-MODULE_LICENSE("GPL");
-
-module_init(wbcir_init);
-module_exit(wbcir_exit);
-
-
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 7f85a862ad11..7077f9bf5ead 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -11,12 +11,6 @@
  *  more details.
  */
 
-/*
- * TODO:
- *
- * Switch to grant tables together with xen-fbfront.c.
- */
-
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/kernel.h>
@@ -30,6 +24,8 @@
 #include <xen/xen.h>
 #include <xen/events.h>
 #include <xen/page.h>
+#include <xen/grant_table.h>
+#include <xen/interface/grant_table.h>
 #include <xen/interface/io/fbif.h>
 #include <xen/interface/io/kbdif.h>
 #include <xen/xenbus.h>
@@ -38,6 +34,7 @@ struct xenkbd_info {
 	struct input_dev *kbd;
 	struct input_dev *ptr;
 	struct xenkbd_page *page;
+	int gref;
 	int irq;
 	struct xenbus_device *xbdev;
 	char phys[32];
@@ -110,7 +107,7 @@ static irqreturn_t input_handler(int rq, void *dev_id)
 static int __devinit xenkbd_probe(struct xenbus_device *dev,
 				  const struct xenbus_device_id *id)
 {
-	int ret, i;
+	int ret, i, abs;
 	struct xenkbd_info *info;
 	struct input_dev *kbd, *ptr;
 
@@ -122,12 +119,18 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev,
 	dev_set_drvdata(&dev->dev, info);
 	info->xbdev = dev;
 	info->irq = -1;
+	info->gref = -1;
 	snprintf(info->phys, sizeof(info->phys), "xenbus/%s", dev->nodename);
 
 	info->page = (void *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
 	if (!info->page)
 		goto error_nomem;
 
+	if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-abs-pointer", "%d", &abs) < 0)
+		abs = 0;
+	if (abs)
+		xenbus_printf(XBT_NIL, dev->nodename, "request-abs-pointer", "1");
+
 	/* keyboard */
 	kbd = input_allocate_device();
 	if (!kbd)
@@ -137,11 +140,12 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev,
 	kbd->id.bustype = BUS_PCI;
 	kbd->id.vendor = 0x5853;
 	kbd->id.product = 0xffff;
-	kbd->evbit[0] = BIT(EV_KEY);
+
+	__set_bit(EV_KEY, kbd->evbit);
 	for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
-		set_bit(i, kbd->keybit);
+		__set_bit(i, kbd->keybit);
 	for (i = KEY_OK; i < KEY_MAX; i++)
-		set_bit(i, kbd->keybit);
+		__set_bit(i, kbd->keybit);
 
 	ret = input_register_device(kbd);
 	if (ret) {
@@ -160,12 +164,20 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev,
 	ptr->id.bustype = BUS_PCI;
 	ptr->id.vendor = 0x5853;
 	ptr->id.product = 0xfffe;
-	ptr->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
+
+	if (abs) {
+		__set_bit(EV_ABS, ptr->evbit);
+		input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0);
+		input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0);
+	} else {
+		input_set_capability(ptr, EV_REL, REL_X);
+		input_set_capability(ptr, EV_REL, REL_Y);
+	}
+	input_set_capability(ptr, EV_REL, REL_WHEEL);
+
+	__set_bit(EV_KEY, ptr->evbit);
 	for (i = BTN_LEFT; i <= BTN_TASK; i++)
-		set_bit(i, ptr->keybit);
-	ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL);
-	input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0);
-	input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0);
+		__set_bit(i, ptr->keybit);
 
 	ret = input_register_device(ptr);
 	if (ret) {
@@ -218,15 +230,20 @@ static int xenkbd_connect_backend(struct xenbus_device *dev,
 	int ret, evtchn;
 	struct xenbus_transaction xbt;
 
+	ret = gnttab_grant_foreign_access(dev->otherend_id,
+	                                  virt_to_mfn(info->page), 0);
+	if (ret < 0)
+		return ret;
+	info->gref = ret;
+
 	ret = xenbus_alloc_evtchn(dev, &evtchn);
 	if (ret)
-		return ret;
+		goto error_grant;
 	ret = bind_evtchn_to_irqhandler(evtchn, input_handler,
 					0, dev->devicetype, info);
 	if (ret < 0) {
-		xenbus_free_evtchn(dev, evtchn);
 		xenbus_dev_fatal(dev, ret, "bind_evtchn_to_irqhandler");
-		return ret;
+		goto error_evtchan;
 	}
 	info->irq = ret;
 
@@ -234,12 +251,15 @@ static int xenkbd_connect_backend(struct xenbus_device *dev,
 	ret = xenbus_transaction_start(&xbt);
 	if (ret) {
 		xenbus_dev_fatal(dev, ret, "starting transaction");
-		return ret;
+		goto error_irqh;
 	}
 	ret = xenbus_printf(xbt, dev->nodename, "page-ref", "%lu",
 			    virt_to_mfn(info->page));
 	if (ret)
 		goto error_xenbus;
+	ret = xenbus_printf(xbt, dev->nodename, "page-gref", "%u", info->gref);
+	if (ret)
+		goto error_xenbus;
 	ret = xenbus_printf(xbt, dev->nodename, "event-channel", "%u",
 			    evtchn);
 	if (ret)
@@ -249,7 +269,7 @@ static int xenkbd_connect_backend(struct xenbus_device *dev,
 		if (ret == -EAGAIN)
 			goto again;
 		xenbus_dev_fatal(dev, ret, "completing transaction");
-		return ret;
+		goto error_irqh;
 	}
 
 	xenbus_switch_state(dev, XenbusStateInitialised);
@@ -258,6 +278,14 @@ static int xenkbd_connect_backend(struct xenbus_device *dev,
  error_xenbus:
 	xenbus_transaction_end(xbt, 1);
 	xenbus_dev_fatal(dev, ret, "writing xenstore");
+ error_irqh:
+	unbind_from_irqhandler(info->irq, info);
+	info->irq = -1;
+ error_evtchan:
+	xenbus_free_evtchn(dev, evtchn);
+ error_grant:
+	gnttab_end_foreign_access_ref(info->gref, 0);
+	info->gref = -1;
 	return ret;
 }
 
@@ -266,13 +294,16 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *info)
 	if (info->irq >= 0)
 		unbind_from_irqhandler(info->irq, info);
 	info->irq = -1;
+	if (info->gref >= 0)
+		gnttab_end_foreign_access_ref(info->gref, 0);
+	info->gref = -1;
 }
 
 static void xenkbd_backend_changed(struct xenbus_device *dev,
 				   enum xenbus_state backend_state)
 {
 	struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
-	int ret, val;
+	int val;
 
 	switch (backend_state) {
 	case XenbusStateInitialising:
@@ -285,16 +316,6 @@ static void xenkbd_backend_changed(struct xenbus_device *dev,
 
 	case XenbusStateInitWait:
 InitWait:
-		ret = xenbus_scanf(XBT_NIL, info->xbdev->otherend,
-				   "feature-abs-pointer", "%d", &val);
-		if (ret < 0)
-			val = 0;
-		if (val) {
-			ret = xenbus_printf(XBT_NIL, info->xbdev->nodename,
-					    "request-abs-pointer", "1");
-			if (ret)
-				pr_warning("can't request abs-pointer\n");
-		}
 		xenbus_switch_state(dev, XenbusStateConnected);
 		break;
 
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index bf5fd7f6a313..9c1e6ee83531 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -39,7 +39,7 @@ config MOUSE_PS2
 	  module will be called psmouse.
 
 config MOUSE_PS2_ALPS
-	bool "ALPS PS/2 mouse protocol extension" if EMBEDDED
+	bool "ALPS PS/2 mouse protocol extension" if EXPERT
 	default y
 	depends on MOUSE_PS2
 	help
@@ -49,7 +49,7 @@ config MOUSE_PS2_ALPS
 	  If unsure, say Y.
 
 config MOUSE_PS2_LOGIPS2PP
-	bool "Logitech PS/2++ mouse protocol extension" if EMBEDDED
+	bool "Logitech PS/2++ mouse protocol extension" if EXPERT
 	default y
 	depends on MOUSE_PS2
 	help
@@ -59,7 +59,7 @@ config MOUSE_PS2_LOGIPS2PP
 	  If unsure, say Y.
 
 config MOUSE_PS2_SYNAPTICS
-	bool "Synaptics PS/2 mouse protocol extension" if EMBEDDED
+	bool "Synaptics PS/2 mouse protocol extension" if EXPERT
 	default y
 	depends on MOUSE_PS2
 	help
@@ -69,7 +69,7 @@ config MOUSE_PS2_SYNAPTICS
 	  If unsure, say Y.
 
 config MOUSE_PS2_LIFEBOOK
-	bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
+	bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EXPERT
 	default y
 	depends on MOUSE_PS2 && X86 && DMI
 	help
@@ -79,7 +79,7 @@ config MOUSE_PS2_LIFEBOOK
 	  If unsure, say Y.
 
 config MOUSE_PS2_TRACKPOINT
-	bool "IBM Trackpoint PS/2 mouse protocol extension" if EMBEDDED
+	bool "IBM Trackpoint PS/2 mouse protocol extension" if EXPERT
 	default y
 	depends on MOUSE_PS2
 	help
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index d24837210f04..3aead91bacc8 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -55,6 +55,18 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI	0x0236
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO	0x0237
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS	0x0238
+/* MacbookAir3,2 (unibody), aka wellspring5 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI	0x023f
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_ISO	0x0240
+#define USB_DEVICE_ID_APPLE_WELLSPRING4_JIS	0x0241
+/* MacbookAir3,1 (unibody), aka wellspring4 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI	0x0242
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO	0x0243
+#define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS	0x0244
+/* Macbook8 (unibody, March 2011) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI	0x0245
+#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO	0x0246
+#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS	0x0247
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
@@ -80,6 +92,18 @@ static const struct usb_device_id bcm5974_table[] = {
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
+	/* MacbookAir3,2 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4_JIS),
+	/* MacbookAir3,1 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
+	/* MacbookPro8 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS),
 	/* Terminating entry */
 	{}
 };
@@ -234,6 +258,42 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		{ DIM_X, DIM_X / SN_COORD, -4460, 5166 },
 		{ DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING4_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING4_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+		{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4616, 5112 },
+		{ DIM_Y, DIM_Y / SN_COORD, -142, 5234 }
+	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING5_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING5_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4415, 5050 },
+		{ DIM_Y, DIM_Y / SN_COORD, -55, 6680 }
+	},
 	{}
 };
 
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
index 0ae62f0bcb32..f6aa26d305ed 100644
--- a/drivers/input/mouse/synaptics_i2c.c
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
+#include <linux/pm.h>
 
 #define DRIVER_NAME		"synaptics_i2c"
 /* maximum product id is 15 characters */
@@ -619,8 +620,9 @@ static int __devexit synaptics_i2c_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int synaptics_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+static int synaptics_i2c_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct synaptics_i2c *touch = i2c_get_clientdata(client);
 
 	cancel_delayed_work_sync(&touch->dwork);
@@ -631,9 +633,10 @@ static int synaptics_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int synaptics_i2c_resume(struct i2c_client *client)
+static int synaptics_i2c_resume(struct device *dev)
 {
 	int ret;
+	struct i2c_client *client = to_i2c_client(dev);
 	struct synaptics_i2c *touch = i2c_get_clientdata(client);
 
 	ret = synaptics_i2c_reset_config(client);
@@ -645,11 +648,11 @@ static int synaptics_i2c_resume(struct i2c_client *client)
 
 	return 0;
 }
-#else
-#define synaptics_i2c_suspend	NULL
-#define synaptics_i2c_resume	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(synaptics_i2c_pm, synaptics_i2c_suspend,
+			 synaptics_i2c_resume);
+
 static const struct i2c_device_id synaptics_i2c_id_table[] = {
 	{ "synaptics_i2c", 0 },
 	{ },
@@ -660,13 +663,12 @@ static struct i2c_driver synaptics_i2c_driver = {
 	.driver = {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
+		.pm	= &synaptics_i2c_pm,
 	},
 
 	.probe		= synaptics_i2c_probe,
 	.remove		= __devexit_p(synaptics_i2c_remove),
 
-	.suspend	= synaptics_i2c_suspend,
-	.resume		= synaptics_i2c_resume,
 	.id_table	= synaptics_i2c_id_table,
 };
 
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 6256233d2bfb..55f2c2293ec6 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -2,7 +2,7 @@
 # Input core configuration
 #
 config SERIO
-	tristate "Serial I/O support" if EMBEDDED || !X86
+	tristate "Serial I/O support" if EXPERT || !X86
 	default y
 	help
 	  Say Yes here if you have any input device that uses serial I/O to
@@ -19,7 +19,7 @@ config SERIO
 if SERIO
 
 config SERIO_I8042
-	tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
+	tristate "i8042 PC Keyboard controller" if EXPERT || !X86
 	default y
 	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \
 		   (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN
@@ -168,7 +168,7 @@ config SERIO_MACEPS2
 	  module will be called maceps2.
 
 config SERIO_LIBPS2
-	tristate "PS/2 driver library" if EMBEDDED
+	tristate "PS/2 driver library" if EXPERT
 	depends on SERIO_I8042 || SERIO_I8042=n
 	help
 	  Say Y here if you are using a driver for device connected
@@ -214,7 +214,6 @@ config SERIO_AMS_DELTA
 	tristate "Amstrad Delta (E3) mailboard support"
 	depends on MACH_AMS_DELTA
 	default y
-	select AMS_DELTA_FIQ
 	---help---
 	  Say Y here if you have an E3 and want to use its mailboard,
 	  or any standard AT keyboard connected to the mailboard port.
@@ -230,7 +229,7 @@ config SERIO_PS2MULT
 	tristate "TQC PS/2 multiplexer"
 	help
 	  Say Y here if you have the PS/2 line multiplexer like the one
-	  present on TQC boads.
+	  present on TQC boards.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ps2mult.
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 3c287dd879d3..4225f5d6b15f 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -358,7 +358,7 @@ static int __devinit gscps2_probe(struct parisc_device *dev)
 	gscps2_reset(ps2port);
 	ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f;
 
-	snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
+	snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s",
 		 (ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
 	strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
 	serio->id.type		= SERIO_8042;
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index cd82bb125915..b7ba4597f7f0 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -11,7 +11,6 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/serio.h>
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index 7729e547ba65..337bf51bc984 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -210,8 +210,8 @@ int sparse_keymap_setup(struct input_dev *dev,
 
 	dev->keycode = map;
 	dev->keycodemax = map_size;
-	dev->getkeycode_new = sparse_keymap_getkeycode;
-	dev->setkeycode_new = sparse_keymap_setkeycode;
+	dev->getkeycode = sparse_keymap_getkeycode;
+	dev->setkeycode = sparse_keymap_setkeycode;
 
 	return 0;
 
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index cf8fb9f5d4a8..449c0a46dbac 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -193,16 +193,16 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			case HID_USAGE_X:
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
-						features->device_type = BTN_TOOL_DOUBLETAP;
+						features->device_type = BTN_TOOL_FINGER;
 						if (features->type == TABLETPC2FG) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 						}
 						if (features->type == BAMBOO_PT) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_BBTOUCH;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->x_phy =
 								get_unaligned_le16(&report[i + 5]);
 							features->x_max =
@@ -241,11 +241,11 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 			case HID_USAGE_Y:
 				if (usage == WCM_DESKTOP) {
 					if (finger) {
-						features->device_type = BTN_TOOL_DOUBLETAP;
+						features->device_type = BTN_TOOL_FINGER;
 						if (features->type == TABLETPC2FG) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_TPC2FG;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->y_max =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_phy =
@@ -254,7 +254,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
 						} else if (features->type == BAMBOO_PT) {
 							/* need to reset back */
 							features->pktlen = WACOM_PKGLEN_BBTOUCH;
-							features->device_type = BTN_TOOL_TRIPLETAP;
+							features->device_type = BTN_TOOL_DOUBLETAP;
 							features->y_phy =
 								get_unaligned_le16(&report[i + 3]);
 							features->y_max =
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 367fa82a607e..5597637cfd41 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -675,169 +675,87 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
 	return 1;
 }
 
-
-static void wacom_tpc_finger_in(struct wacom_wac *wacom, char *data, int idx)
+static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
 {
 	struct input_dev *input = wacom->input;
-	int finger = idx + 1;
-	int x = le16_to_cpup((__le16 *)&data[finger * 2]) & 0x7fff;
-	int y = le16_to_cpup((__le16 *)&data[4 + finger * 2]) & 0x7fff;
+	unsigned char *data = wacom->data;
+	int contact_with_no_pen_down_count = 0;
+	int i;
 
-	/*
-	 * Work around input core suppressing "duplicate" events since
-	 * we are abusing ABS_X/ABS_Y to transmit multi-finger data.
-	 * This should go away once we switch to true multitouch
-	 * protocol.
-	 */
-	if (wacom->last_finger != finger) {
-		if (x == input_abs_get_val(input, ABS_X))
-			x++;
+	for (i = 0; i < 2; i++) {
+		int p = data[1] & (1 << i);
+		bool touch = p && !wacom->shared->stylus_in_proximity;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+		if (touch) {
+			int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
+			int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
 
-		if (y == input_abs_get_val(input, ABS_Y))
-			y++;
+			input_report_abs(input, ABS_MT_POSITION_X, x);
+			input_report_abs(input, ABS_MT_POSITION_Y, y);
+			contact_with_no_pen_down_count++;
+		}
 	}
 
-	input_report_abs(input, ABS_X, x);
-	input_report_abs(input, ABS_Y, y);
-	input_report_abs(input, ABS_MISC, wacom->id[0]);
-	input_report_key(input, wacom->tool[finger], 1);
-	if (!idx)
-		input_report_key(input, BTN_TOUCH, 1);
-	input_event(input, EV_MSC, MSC_SERIAL, finger);
-	input_sync(input);
+	/* keep touch state for pen event */
+	wacom->shared->touch_down = (contact_with_no_pen_down_count > 0);
 
-	wacom->last_finger = finger;
-}
+	input_mt_report_pointer_emulation(input, true);
 
-static void wacom_tpc_touch_out(struct wacom_wac *wacom, int idx)
-{
-	struct input_dev *input = wacom->input;
-	int finger = idx + 1;
-
-	input_report_abs(input, ABS_X, 0);
-	input_report_abs(input, ABS_Y, 0);
-	input_report_abs(input, ABS_MISC, 0);
-	input_report_key(input, wacom->tool[finger], 0);
-	if (!idx)
-		input_report_key(input, BTN_TOUCH, 0);
-	input_event(input, EV_MSC, MSC_SERIAL, finger);
-	input_sync(input);
+	return 1;
 }
 
-static void wacom_tpc_touch_in(struct wacom_wac *wacom, size_t len)
+static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
 {
 	char *data = wacom->data;
 	struct input_dev *input = wacom->input;
+	bool prox;
+	int x = 0, y = 0;
 
-	wacom->tool[1] = BTN_TOOL_DOUBLETAP;
-	wacom->id[0] = TOUCH_DEVICE_ID;
-	wacom->tool[2] = BTN_TOOL_TRIPLETAP;
-
-	if (len != WACOM_PKGLEN_TPC1FG) {
-
-		switch (data[0]) {
+	if (!wacom->shared->stylus_in_proximity) {
+		if (len == WACOM_PKGLEN_TPC1FG) {
+			prox = data[0] & 0x01;
+			x = get_unaligned_le16(&data[1]);
+			y = get_unaligned_le16(&data[3]);
+		} else { /* with capacity */
+			prox = data[1] & 0x01;
+			x = le16_to_cpup((__le16 *)&data[2]);
+			y = le16_to_cpup((__le16 *)&data[4]);
+		}
+	} else
+		/* force touch out when pen is in prox */
+		prox = 0;
 
-		case WACOM_REPORT_TPC1FG:
-			input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
-			input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
-			input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
-			input_report_key(input, BTN_TOUCH, le16_to_cpup((__le16 *)&data[6]));
-			input_report_abs(input, ABS_MISC, wacom->id[0]);
-			input_report_key(input, wacom->tool[1], 1);
-			input_sync(input);
-			break;
+	if (prox) {
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+	}
+	input_report_key(input, BTN_TOUCH, prox);
 
-		case WACOM_REPORT_TPC2FG:
-			if (data[1] & 0x01)
-				wacom_tpc_finger_in(wacom, data, 0);
-			else if (wacom->id[1] & 0x01)
-				wacom_tpc_touch_out(wacom, 0);
+	/* keep touch state for pen events */
+	wacom->shared->touch_down = prox;
 
-			if (data[1] & 0x02)
-				wacom_tpc_finger_in(wacom, data, 1);
-			else if (wacom->id[1] & 0x02)
-				wacom_tpc_touch_out(wacom, 1);
-			break;
-		}
-	} else {
-		input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
-		input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
-		input_report_key(input, BTN_TOUCH, 1);
-		input_report_abs(input, ABS_MISC, wacom->id[1]);
-		input_report_key(input, wacom->tool[1], 1);
-		input_sync(input);
-	}
+	return 1;
 }
 
-static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
+static int wacom_tpc_pen(struct wacom_wac *wacom)
 {
 	struct wacom_features *features = &wacom->features;
 	char *data = wacom->data;
 	struct input_dev *input = wacom->input;
-	int prox = 0, pressure;
-	int retval = 0;
+	int pressure;
+	bool prox = data[1] & 0x20;
 
-	dbg("wacom_tpc_irq: received report #%d", data[0]);
-
-	if (len == WACOM_PKGLEN_TPC1FG ||		 /* single touch */
-	    data[0] == WACOM_REPORT_TPC1FG ||		 /* single touch */
-	    data[0] == WACOM_REPORT_TPC2FG) {		 /* 2FG touch */
-
-		if (wacom->shared->stylus_in_proximity) {
-			if (wacom->id[1] & 0x01)
-				wacom_tpc_touch_out(wacom, 0);
-
-			if (wacom->id[1] & 0x02)
-				wacom_tpc_touch_out(wacom, 1);
-
-			wacom->id[1] = 0;
-			return 0;
-		}
-
-		if (len == WACOM_PKGLEN_TPC1FG) {	/* with touch */
-			prox = data[0] & 0x01;
-		} else {  /* with capacity */
-			if (data[0] == WACOM_REPORT_TPC1FG)
-				/* single touch */
-				prox = data[1] & 0x01;
-			else
-				/* 2FG touch data */
-				prox = data[1] & 0x03;
-		}
-
-		if (prox) {
-			if (!wacom->id[1])
-				wacom->last_finger = 1;
-			wacom_tpc_touch_in(wacom, len);
-		} else {
-			if (data[0] == WACOM_REPORT_TPC2FG) {
-				/* 2FGT out-prox */
-				if (wacom->id[1] & 0x01)
-					wacom_tpc_touch_out(wacom, 0);
+	if (!wacom->shared->stylus_in_proximity) /* first in prox */
+		/* Going into proximity select tool */
+		wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
 
-				if (wacom->id[1] & 0x02)
-					wacom_tpc_touch_out(wacom, 1);
-			} else
-				/* one finger touch */
-				wacom_tpc_touch_out(wacom, 0);
+	/* keep pen state for touch events */
+	wacom->shared->stylus_in_proximity = prox;
 
-			wacom->id[0] = 0;
-		}
-		/* keep prox bit to send proper out-prox event */
-		wacom->id[1] = prox;
-	} else if (data[0] == WACOM_REPORT_PENABLED) { /* Penabled */
-		prox = data[1] & 0x20;
-
-		if (!wacom->shared->stylus_in_proximity) { /* first in prox */
-			/* Going into proximity select tool */
-			wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-			if (wacom->tool[0] == BTN_TOOL_PEN)
-				wacom->id[0] = STYLUS_DEVICE_ID;
-			else
-				wacom->id[0] = ERASER_DEVICE_ID;
-
-			wacom->shared->stylus_in_proximity = true;
-		}
+	/* send pen events only when touch is up or forced out */
+	if (!wacom->shared->touch_down) {
 		input_report_key(input, BTN_STYLUS, data[1] & 0x02);
 		input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
 		input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
@@ -847,15 +765,27 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
 			pressure = features->pressure_max + pressure + 1;
 		input_report_abs(input, ABS_PRESSURE, pressure);
 		input_report_key(input, BTN_TOUCH, data[1] & 0x05);
-		if (!prox) { /* out-prox */
-			wacom->id[0] = 0;
-			wacom->shared->stylus_in_proximity = false;
-		}
 		input_report_key(input, wacom->tool[0], prox);
-		input_report_abs(input, ABS_MISC, wacom->id[0]);
-		retval = 1;
+		return 1;
 	}
-	return retval;
+
+	return 0;
+}
+
+static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
+{
+	char *data = wacom->data;
+
+	dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+	if (len == WACOM_PKGLEN_TPC1FG || data[0] == WACOM_REPORT_TPC1FG)
+		return wacom_tpc_single_touch(wacom, len);
+	else if (data[0] == WACOM_REPORT_TPC2FG)
+		return wacom_tpc_mt_touch(wacom);
+	else if (data[0] == WACOM_REPORT_PENABLED)
+		return wacom_tpc_pen(wacom);
+
+	return 0;
 }
 
 static int wacom_bpt_touch(struct wacom_wac *wacom)
@@ -1078,7 +1008,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 {
 
 	/* touch device found but size is not defined. use default */
-	if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) {
+	if (features->device_type == BTN_TOOL_FINGER && !features->x_max) {
 		features->x_max = 1023;
 		features->y_max = 1023;
 	}
@@ -1090,7 +1020,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
 
 	/* quirks for bamboo touch */
 	if (features->type == BAMBOO_PT &&
-	    features->device_type == BTN_TOOL_TRIPLETAP) {
+	    features->device_type == BTN_TOOL_DOUBLETAP) {
 		features->x_max <<= 5;
 		features->y_max <<= 5;
 		features->x_fuzz <<= 5;
@@ -1226,27 +1156,30 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 		break;
 
 	case TABLETPC2FG:
-		if (features->device_type == BTN_TOOL_TRIPLETAP) {
-			__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
-			input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
+		if (features->device_type == BTN_TOOL_DOUBLETAP) {
+
+			input_mt_init_slots(input_dev, 2);
+			input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+					0, MT_TOOL_MAX, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+					0, features->x_max, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+					0, features->y_max, 0, 0);
 		}
 		/* fall through */
 
 	case TABLETPC:
-		if (features->device_type == BTN_TOOL_DOUBLETAP ||
-		    features->device_type == BTN_TOOL_TRIPLETAP) {
+		__clear_bit(ABS_MISC, input_dev->absbit);
+
+		if (features->device_type != BTN_TOOL_PEN) {
 			input_abs_set_res(input_dev, ABS_X,
 				wacom_calculate_touch_res(features->x_max,
 							features->x_phy));
 			input_abs_set_res(input_dev, ABS_Y,
 				wacom_calculate_touch_res(features->y_max,
 							features->y_phy));
-			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
-		}
-
-		if (features->device_type != BTN_TOOL_PEN)
 			break;  /* no need to process stylus stuff */
-
+		}
 		/* fall through */
 
 	case PL:
@@ -1264,7 +1197,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 	case BAMBOO_PT:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
-		if (features->device_type == BTN_TOOL_TRIPLETAP) {
+		if (features->device_type == BTN_TOOL_DOUBLETAP) {
 			__set_bit(BTN_LEFT, input_dev->keybit);
 			__set_bit(BTN_FORWARD, input_dev->keybit);
 			__set_bit(BTN_BACK, input_dev->keybit);
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index b1310ec9720c..835f756b150c 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -88,15 +88,15 @@ struct wacom_features {
 
 struct wacom_shared {
 	bool stylus_in_proximity;
+	bool touch_down;
 };
 
 struct wacom_wac {
 	char name[64];
 	unsigned char *data;
-	int tool[3];
-	int id[3];
+	int tool[2];
+	int id[2];
 	__u32 serial[2];
-	int last_finger;
 	struct wacom_features features;
 	struct wacom_shared *shared;
 	struct input_dev *input;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 07ac77d393a4..112ec55f2939 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -86,6 +86,18 @@ config TOUCHSCREEN_AD7879_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7879-spi.
 
+config TOUCHSCREEN_ATMEL_MXT
+	tristate "Atmel mXT I2C Touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have Atmel mXT series I2C touchscreen,
+	  such as AT42QT602240/ATMXT224, connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atmel_mxt_ts.
+
 config TOUCHSCREEN_BITSY
 	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
 	depends on SA1100_BITSY
@@ -339,18 +351,6 @@ config TOUCHSCREEN_PENMOUNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called penmount.
 
-config TOUCHSCREEN_QT602240
-	tristate "QT602240 I2C Touchscreen"
-	depends on I2C
-	help
-	  Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen
-	  connected to your system.
-
-	  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called qt602240_ts.
-
 config TOUCHSCREEN_MIGOR
 	tristate "Renesas MIGO-R touchscreen"
 	depends on SH_MIGOR && I2C
@@ -423,6 +423,16 @@ config TOUCHSCREEN_UCB1400
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_ts.
 
+config TOUCHSCREEN_WM831X
+	tristate "Support for WM831x touchscreen controllers"
+	depends on MFD_WM831X
+	help
+	  This enables support for the touchscreen controller on the WM831x
+	  series of PMICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wm831x-ts.
+
 config TOUCHSCREEN_WM97XX
 	tristate "Support for WM97xx AC97 touchscreen controllers"
 	depends on AC97_BUS
@@ -540,62 +550,62 @@ config TOUCHSCREEN_MC13783
 
 config TOUCHSCREEN_USB_EGALAX
 	default y
-	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
+	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_PANJIT
 	default y
-	bool "PanJit device support" if EMBEDDED
+	bool "PanJit device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_3M
 	default y
-	bool "3M/Microtouch EX II series device support" if EMBEDDED
+	bool "3M/Microtouch EX II series device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_ITM
 	default y
-	bool "ITM device support" if EMBEDDED
+	bool "ITM device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_ETURBO
 	default y
-	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
+	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_GUNZE
 	default y
-	bool "Gunze AHL61 device support" if EMBEDDED
+	bool "Gunze AHL61 device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_DMC_TSC10
 	default y
-	bool "DMC TSC-10/25 device support" if EMBEDDED
+	bool "DMC TSC-10/25 device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_IRTOUCH
 	default y
-	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
+	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_IDEALTEK
 	default y
-	bool "IdealTEK URTC1000 device support" if EMBEDDED
+	bool "IdealTEK URTC1000 device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_GENERAL_TOUCH
 	default y
-	bool "GeneralTouch Touchscreen device support" if EMBEDDED
+	bool "GeneralTouch Touchscreen device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_GOTOP
 	default y
-	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
+	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_JASTEC
 	default y
-	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
+	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_E2I
@@ -605,17 +615,17 @@ config TOUCHSCREEN_USB_E2I
 
 config TOUCHSCREEN_USB_ZYTRONIC
 	default y
-	bool "Zytronic controller" if EMBEDDED
+	bool "Zytronic controller" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_ETT_TC45USB
 	default y
-	bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
+	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_NEXIO
 	default y
-	bool "NEXIO/iNexio device support" if EMBEDDED
+	bool "NEXIO/iNexio device support" if EXPERT
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_TOUCHIT213
@@ -629,6 +639,17 @@ config TOUCHSCREEN_TOUCHIT213
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchit213.
 
+config TOUCHSCREEN_TSC2005
+        tristate "TSC2005 based touchscreens"
+        depends on SPI_MASTER
+        help
+          Say Y here if you have a TSC2005 based touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tsc2005.
+
 config TOUCHSCREEN_TSC2007
 	tristate "TSC2007 based touchscreens"
 	depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 718bcc814952..ca94098d4c92 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879)	+= ad7879.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C)	+= ad7879-i2c.o
 obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
+obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)       += bu21013_ts.o
@@ -37,7 +38,6 @@ obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o
 obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
-obj-$(CONFIG_TOUCHSCREEN_QT602240)	+= qt602240_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
@@ -45,9 +45,11 @@ obj-$(CONFIG_TOUCHSCREEN_TNETV107X)	+= tnetv107x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_TSC2005)	+= tsc2005.o
 obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
+obj-$(CONFIG_TOUCHSCREEN_WM831X)	+= wm831x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index a1952fcc083e..714d4e0f9f95 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -41,6 +41,7 @@
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ad7877.h>
@@ -826,39 +827,37 @@ static int __devexit ad7877_remove(struct spi_device *spi)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int ad7877_suspend(struct spi_device *spi, pm_message_t message)
+#ifdef CONFIG_PM_SLEEP
+static int ad7877_suspend(struct device *dev)
 {
-	struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+	struct ad7877 *ts = dev_get_drvdata(dev);
 
 	ad7877_disable(ts);
 
 	return 0;
 }
 
-static int ad7877_resume(struct spi_device *spi)
+static int ad7877_resume(struct device *dev)
 {
-	struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+	struct ad7877 *ts = dev_get_drvdata(dev);
 
 	ad7877_enable(ts);
 
 	return 0;
 }
-#else
-#define ad7877_suspend NULL
-#define ad7877_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(ad7877_pm, ad7877_suspend, ad7877_resume);
+
 static struct spi_driver ad7877_driver = {
 	.driver = {
 		.name	= "ad7877",
 		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
+		.pm	= &ad7877_pm,
 	},
 	.probe		= ad7877_probe,
 	.remove		= __devexit_p(ad7877_remove),
-	.suspend	= ad7877_suspend,
-	.resume		= ad7877_resume,
 };
 
 static int __init ad7877_init(void)
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
index 59c6e68c4325..ddf732f3cafc 100644
--- a/drivers/input/touchscreen/ad7879-spi.c
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/input.h>	/* BUS_SPI */
+#include <linux/pm.h>
 #include <linux/spi/spi.h>
 
 #include "ad7879.h"
@@ -20,9 +21,10 @@
 #define AD7879_WRITECMD(reg) (AD7879_CMD(reg))
 #define AD7879_READCMD(reg)  (AD7879_CMD(reg) | AD7879_CMD_READ)
 
-#ifdef CONFIG_PM
-static int ad7879_spi_suspend(struct spi_device *spi, pm_message_t message)
+#ifdef CONFIG_PM_SLEEP
+static int ad7879_spi_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct ad7879 *ts = spi_get_drvdata(spi);
 
 	ad7879_suspend(ts);
@@ -30,19 +32,19 @@ static int ad7879_spi_suspend(struct spi_device *spi, pm_message_t message)
 	return 0;
 }
 
-static int ad7879_spi_resume(struct spi_device *spi)
+static int ad7879_spi_resume(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct ad7879 *ts = spi_get_drvdata(spi);
 
 	ad7879_resume(ts);
 
 	return 0;
 }
-#else
-# define ad7879_spi_suspend NULL
-# define ad7879_spi_resume  NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(ad7879_spi_pm, ad7879_spi_suspend, ad7879_spi_resume);
+
 /*
  * ad7879_read/write are only used for initial setup and for sysfs controls.
  * The main traffic is done in ad7879_collect().
@@ -173,11 +175,10 @@ static struct spi_driver ad7879_spi_driver = {
 		.name	= "ad7879",
 		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
+		.pm	= &ad7879_spi_pm,
 	},
 	.probe		= ad7879_spi_probe,
 	.remove		= __devexit_p(ad7879_spi_remove),
-	.suspend	= ad7879_spi_suspend,
-	.resume		= ad7879_spi_resume,
 };
 
 static int __init ad7879_spi_init(void)
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 4bf2316e3284..c24946f51256 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -26,6 +26,7 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/pm.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -892,9 +893,10 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
 	return IRQ_HANDLED;
 }
 
-static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
+#ifdef CONFIG_PM_SLEEP
+static int ads7846_suspend(struct device *dev)
 {
-	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+	struct ads7846 *ts = dev_get_drvdata(dev);
 
 	mutex_lock(&ts->lock);
 
@@ -914,9 +916,9 @@ static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
 	return 0;
 }
 
-static int ads7846_resume(struct spi_device *spi)
+static int ads7846_resume(struct device *dev)
 {
-	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+	struct ads7846 *ts = dev_get_drvdata(dev);
 
 	mutex_lock(&ts->lock);
 
@@ -935,6 +937,9 @@ static int ads7846_resume(struct spi_device *spi)
 
 	return 0;
 }
+#endif
+
+static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
 
 static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts)
 {
@@ -1408,11 +1413,10 @@ static struct spi_driver ads7846_driver = {
 		.name	= "ads7846",
 		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
+		.pm	= &ads7846_pm,
 	},
 	.probe		= ads7846_probe,
 	.remove		= __devexit_p(ads7846_remove),
-	.suspend	= ads7846_suspend,
-	.resume		= ads7846_resume,
 };
 
 static int __init ads7846_init(void)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
new file mode 100644
index 000000000000..4012436633b1
--- /dev/null
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -0,0 +1,1211 @@
+/*
+ * Atmel maXTouch Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+/* Version */
+#define MXT_VER_20		20
+#define MXT_VER_21		21
+#define MXT_VER_22		22
+
+/* Slave addresses */
+#define MXT_APP_LOW		0x4a
+#define MXT_APP_HIGH		0x4b
+#define MXT_BOOT_LOW		0x24
+#define MXT_BOOT_HIGH		0x25
+
+/* Firmware */
+#define MXT_FW_NAME		"maxtouch.fw"
+
+/* Registers */
+#define MXT_FAMILY_ID		0x00
+#define MXT_VARIANT_ID		0x01
+#define MXT_VERSION		0x02
+#define MXT_BUILD		0x03
+#define MXT_MATRIX_X_SIZE	0x04
+#define MXT_MATRIX_Y_SIZE	0x05
+#define MXT_OBJECT_NUM		0x06
+#define MXT_OBJECT_START	0x07
+
+#define MXT_OBJECT_SIZE		6
+
+/* Object types */
+#define MXT_DEBUG_DIAGNOSTIC	37
+#define MXT_GEN_MESSAGE		5
+#define MXT_GEN_COMMAND		6
+#define MXT_GEN_POWER		7
+#define MXT_GEN_ACQUIRE		8
+#define MXT_TOUCH_MULTI		9
+#define MXT_TOUCH_KEYARRAY	15
+#define MXT_TOUCH_PROXIMITY	23
+#define MXT_PROCI_GRIPFACE	20
+#define MXT_PROCG_NOISE		22
+#define MXT_PROCI_ONETOUCH	24
+#define MXT_PROCI_TWOTOUCH	27
+#define MXT_PROCI_GRIP		40
+#define MXT_PROCI_PALM		41
+#define MXT_SPT_COMMSCONFIG	18
+#define MXT_SPT_GPIOPWM		19
+#define MXT_SPT_SELFTEST	25
+#define MXT_SPT_CTECONFIG	28
+#define MXT_SPT_USERDATA	38
+#define MXT_SPT_DIGITIZER	43
+#define MXT_SPT_MESSAGECOUNT	44
+
+/* MXT_GEN_COMMAND field */
+#define MXT_COMMAND_RESET	0
+#define MXT_COMMAND_BACKUPNV	1
+#define MXT_COMMAND_CALIBRATE	2
+#define MXT_COMMAND_REPORTALL	3
+#define MXT_COMMAND_DIAGNOSTIC	5
+
+/* MXT_GEN_POWER field */
+#define MXT_POWER_IDLEACQINT	0
+#define MXT_POWER_ACTVACQINT	1
+#define MXT_POWER_ACTV2IDLETO	2
+
+/* MXT_GEN_ACQUIRE field */
+#define MXT_ACQUIRE_CHRGTIME	0
+#define MXT_ACQUIRE_TCHDRIFT	2
+#define MXT_ACQUIRE_DRIFTST	3
+#define MXT_ACQUIRE_TCHAUTOCAL	4
+#define MXT_ACQUIRE_SYNC	5
+#define MXT_ACQUIRE_ATCHCALST	6
+#define MXT_ACQUIRE_ATCHCALSTHR	7
+
+/* MXT_TOUCH_MULTI field */
+#define MXT_TOUCH_CTRL		0
+#define MXT_TOUCH_XORIGIN	1
+#define MXT_TOUCH_YORIGIN	2
+#define MXT_TOUCH_XSIZE		3
+#define MXT_TOUCH_YSIZE		4
+#define MXT_TOUCH_BLEN		6
+#define MXT_TOUCH_TCHTHR	7
+#define MXT_TOUCH_TCHDI		8
+#define MXT_TOUCH_ORIENT	9
+#define MXT_TOUCH_MOVHYSTI	11
+#define MXT_TOUCH_MOVHYSTN	12
+#define MXT_TOUCH_NUMTOUCH	14
+#define MXT_TOUCH_MRGHYST	15
+#define MXT_TOUCH_MRGTHR	16
+#define MXT_TOUCH_AMPHYST	17
+#define MXT_TOUCH_XRANGE_LSB	18
+#define MXT_TOUCH_XRANGE_MSB	19
+#define MXT_TOUCH_YRANGE_LSB	20
+#define MXT_TOUCH_YRANGE_MSB	21
+#define MXT_TOUCH_XLOCLIP	22
+#define MXT_TOUCH_XHICLIP	23
+#define MXT_TOUCH_YLOCLIP	24
+#define MXT_TOUCH_YHICLIP	25
+#define MXT_TOUCH_XEDGECTRL	26
+#define MXT_TOUCH_XEDGEDIST	27
+#define MXT_TOUCH_YEDGECTRL	28
+#define MXT_TOUCH_YEDGEDIST	29
+#define MXT_TOUCH_JUMPLIMIT	30
+
+/* MXT_PROCI_GRIPFACE field */
+#define MXT_GRIPFACE_CTRL	0
+#define MXT_GRIPFACE_XLOGRIP	1
+#define MXT_GRIPFACE_XHIGRIP	2
+#define MXT_GRIPFACE_YLOGRIP	3
+#define MXT_GRIPFACE_YHIGRIP	4
+#define MXT_GRIPFACE_MAXTCHS	5
+#define MXT_GRIPFACE_SZTHR1	7
+#define MXT_GRIPFACE_SZTHR2	8
+#define MXT_GRIPFACE_SHPTHR1	9
+#define MXT_GRIPFACE_SHPTHR2	10
+#define MXT_GRIPFACE_SUPEXTTO	11
+
+/* MXT_PROCI_NOISE field */
+#define MXT_NOISE_CTRL		0
+#define MXT_NOISE_OUTFLEN	1
+#define MXT_NOISE_GCAFUL_LSB	3
+#define MXT_NOISE_GCAFUL_MSB	4
+#define MXT_NOISE_GCAFLL_LSB	5
+#define MXT_NOISE_GCAFLL_MSB	6
+#define MXT_NOISE_ACTVGCAFVALID	7
+#define MXT_NOISE_NOISETHR	8
+#define MXT_NOISE_FREQHOPSCALE	10
+#define MXT_NOISE_FREQ0		11
+#define MXT_NOISE_FREQ1		12
+#define MXT_NOISE_FREQ2		13
+#define MXT_NOISE_FREQ3		14
+#define MXT_NOISE_FREQ4		15
+#define MXT_NOISE_IDLEGCAFVALID	16
+
+/* MXT_SPT_COMMSCONFIG */
+#define MXT_COMMS_CTRL		0
+#define MXT_COMMS_CMD		1
+
+/* MXT_SPT_CTECONFIG field */
+#define MXT_CTE_CTRL		0
+#define MXT_CTE_CMD		1
+#define MXT_CTE_MODE		2
+#define MXT_CTE_IDLEGCAFDEPTH	3
+#define MXT_CTE_ACTVGCAFDEPTH	4
+#define MXT_CTE_VOLTAGE		5
+
+#define MXT_VOLTAGE_DEFAULT	2700000
+#define MXT_VOLTAGE_STEP	10000
+
+/* Define for MXT_GEN_COMMAND */
+#define MXT_BOOT_VALUE		0xa5
+#define MXT_BACKUP_VALUE	0x55
+#define MXT_BACKUP_TIME		25	/* msec */
+#define MXT_RESET_TIME		65	/* msec */
+
+#define MXT_FWRESET_TIME	175	/* msec */
+
+/* Command to unlock bootloader */
+#define MXT_UNLOCK_CMD_MSB	0xaa
+#define MXT_UNLOCK_CMD_LSB	0xdc
+
+/* Bootloader mode status */
+#define MXT_WAITING_BOOTLOAD_CMD	0xc0	/* valid 7 6 bit only */
+#define MXT_WAITING_FRAME_DATA	0x80	/* valid 7 6 bit only */
+#define MXT_FRAME_CRC_CHECK	0x02
+#define MXT_FRAME_CRC_FAIL	0x03
+#define MXT_FRAME_CRC_PASS	0x04
+#define MXT_APP_CRC_FAIL	0x40	/* valid 7 8 bit only */
+#define MXT_BOOT_STATUS_MASK	0x3f
+
+/* Touch status */
+#define MXT_SUPPRESS		(1 << 1)
+#define MXT_AMP			(1 << 2)
+#define MXT_VECTOR		(1 << 3)
+#define MXT_MOVE		(1 << 4)
+#define MXT_RELEASE		(1 << 5)
+#define MXT_PRESS		(1 << 6)
+#define MXT_DETECT		(1 << 7)
+
+/* Touchscreen absolute values */
+#define MXT_MAX_XC		0x3ff
+#define MXT_MAX_YC		0x3ff
+#define MXT_MAX_AREA		0xff
+
+#define MXT_MAX_FINGER		10
+
+struct mxt_info {
+	u8 family_id;
+	u8 variant_id;
+	u8 version;
+	u8 build;
+	u8 matrix_xsize;
+	u8 matrix_ysize;
+	u8 object_num;
+};
+
+struct mxt_object {
+	u8 type;
+	u16 start_address;
+	u8 size;
+	u8 instances;
+	u8 num_report_ids;
+
+	/* to map object and message */
+	u8 max_reportid;
+};
+
+struct mxt_message {
+	u8 reportid;
+	u8 message[7];
+	u8 checksum;
+};
+
+struct mxt_finger {
+	int status;
+	int x;
+	int y;
+	int area;
+};
+
+/* Each client has this additional data */
+struct mxt_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	const struct mxt_platform_data *pdata;
+	struct mxt_object *object_table;
+	struct mxt_info info;
+	struct mxt_finger finger[MXT_MAX_FINGER];
+	unsigned int irq;
+};
+
+static bool mxt_object_readable(unsigned int type)
+{
+	switch (type) {
+	case MXT_GEN_MESSAGE:
+	case MXT_GEN_COMMAND:
+	case MXT_GEN_POWER:
+	case MXT_GEN_ACQUIRE:
+	case MXT_TOUCH_MULTI:
+	case MXT_TOUCH_KEYARRAY:
+	case MXT_TOUCH_PROXIMITY:
+	case MXT_PROCI_GRIPFACE:
+	case MXT_PROCG_NOISE:
+	case MXT_PROCI_ONETOUCH:
+	case MXT_PROCI_TWOTOUCH:
+	case MXT_PROCI_GRIP:
+	case MXT_PROCI_PALM:
+	case MXT_SPT_COMMSCONFIG:
+	case MXT_SPT_GPIOPWM:
+	case MXT_SPT_SELFTEST:
+	case MXT_SPT_CTECONFIG:
+	case MXT_SPT_USERDATA:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool mxt_object_writable(unsigned int type)
+{
+	switch (type) {
+	case MXT_GEN_COMMAND:
+	case MXT_GEN_POWER:
+	case MXT_GEN_ACQUIRE:
+	case MXT_TOUCH_MULTI:
+	case MXT_TOUCH_KEYARRAY:
+	case MXT_TOUCH_PROXIMITY:
+	case MXT_PROCI_GRIPFACE:
+	case MXT_PROCG_NOISE:
+	case MXT_PROCI_ONETOUCH:
+	case MXT_PROCI_TWOTOUCH:
+	case MXT_PROCI_GRIP:
+	case MXT_PROCI_PALM:
+	case MXT_SPT_GPIOPWM:
+	case MXT_SPT_SELFTEST:
+	case MXT_SPT_CTECONFIG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void mxt_dump_message(struct device *dev,
+				  struct mxt_message *message)
+{
+	dev_dbg(dev, "reportid:\t0x%x\n", message->reportid);
+	dev_dbg(dev, "message1:\t0x%x\n", message->message[0]);
+	dev_dbg(dev, "message2:\t0x%x\n", message->message[1]);
+	dev_dbg(dev, "message3:\t0x%x\n", message->message[2]);
+	dev_dbg(dev, "message4:\t0x%x\n", message->message[3]);
+	dev_dbg(dev, "message5:\t0x%x\n", message->message[4]);
+	dev_dbg(dev, "message6:\t0x%x\n", message->message[5]);
+	dev_dbg(dev, "message7:\t0x%x\n", message->message[6]);
+	dev_dbg(dev, "checksum:\t0x%x\n", message->checksum);
+}
+
+static int mxt_check_bootloader(struct i2c_client *client,
+				     unsigned int state)
+{
+	u8 val;
+
+recheck:
+	if (i2c_master_recv(client, &val, 1) != 1) {
+		dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
+		return -EIO;
+	}
+
+	switch (state) {
+	case MXT_WAITING_BOOTLOAD_CMD:
+	case MXT_WAITING_FRAME_DATA:
+		val &= ~MXT_BOOT_STATUS_MASK;
+		break;
+	case MXT_FRAME_CRC_PASS:
+		if (val == MXT_FRAME_CRC_CHECK)
+			goto recheck;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (val != state) {
+		dev_err(&client->dev, "Unvalid bootloader mode state\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mxt_unlock_bootloader(struct i2c_client *client)
+{
+	u8 buf[2];
+
+	buf[0] = MXT_UNLOCK_CMD_LSB;
+	buf[1] = MXT_UNLOCK_CMD_MSB;
+
+	if (i2c_master_send(client, buf, 2) != 2) {
+		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mxt_fw_write(struct i2c_client *client,
+			     const u8 *data, unsigned int frame_size)
+{
+	if (i2c_master_send(client, data, frame_size) != frame_size) {
+		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int __mxt_read_reg(struct i2c_client *client,
+			       u16 reg, u16 len, void *val)
+{
+	struct i2c_msg xfer[2];
+	u8 buf[2];
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 2;
+	xfer[0].buf = buf;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = len;
+	xfer[1].buf = val;
+
+	if (i2c_transfer(client->adapter, xfer, 2) != 2) {
+		dev_err(&client->dev, "%s: i2c transfer failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val)
+{
+	return __mxt_read_reg(client, reg, 1, val);
+}
+
+static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
+{
+	u8 buf[3];
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+	buf[2] = val;
+
+	if (i2c_master_send(client, buf, 3) != 3) {
+		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mxt_read_object_table(struct i2c_client *client,
+				      u16 reg, u8 *object_buf)
+{
+	return __mxt_read_reg(client, reg, MXT_OBJECT_SIZE,
+				   object_buf);
+}
+
+static struct mxt_object *
+mxt_get_object(struct mxt_data *data, u8 type)
+{
+	struct mxt_object *object;
+	int i;
+
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+		if (object->type == type)
+			return object;
+	}
+
+	dev_err(&data->client->dev, "Invalid object type\n");
+	return NULL;
+}
+
+static int mxt_read_message(struct mxt_data *data,
+				 struct mxt_message *message)
+{
+	struct mxt_object *object;
+	u16 reg;
+
+	object = mxt_get_object(data, MXT_GEN_MESSAGE);
+	if (!object)
+		return -EINVAL;
+
+	reg = object->start_address;
+	return __mxt_read_reg(data->client, reg,
+			sizeof(struct mxt_message), message);
+}
+
+static int mxt_read_object(struct mxt_data *data,
+				u8 type, u8 offset, u8 *val)
+{
+	struct mxt_object *object;
+	u16 reg;
+
+	object = mxt_get_object(data, type);
+	if (!object)
+		return -EINVAL;
+
+	reg = object->start_address;
+	return __mxt_read_reg(data->client, reg + offset, 1, val);
+}
+
+static int mxt_write_object(struct mxt_data *data,
+				 u8 type, u8 offset, u8 val)
+{
+	struct mxt_object *object;
+	u16 reg;
+
+	object = mxt_get_object(data, type);
+	if (!object)
+		return -EINVAL;
+
+	reg = object->start_address;
+	return mxt_write_reg(data->client, reg + offset, val);
+}
+
+static void mxt_input_report(struct mxt_data *data, int single_id)
+{
+	struct mxt_finger *finger = data->finger;
+	struct input_dev *input_dev = data->input_dev;
+	int status = finger[single_id].status;
+	int finger_num = 0;
+	int id;
+
+	for (id = 0; id < MXT_MAX_FINGER; id++) {
+		if (!finger[id].status)
+			continue;
+
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+				finger[id].status != MXT_RELEASE ?
+				finger[id].area : 0);
+		input_report_abs(input_dev, ABS_MT_POSITION_X,
+				finger[id].x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y,
+				finger[id].y);
+		input_mt_sync(input_dev);
+
+		if (finger[id].status == MXT_RELEASE)
+			finger[id].status = 0;
+		else
+			finger_num++;
+	}
+
+	input_report_key(input_dev, BTN_TOUCH, finger_num > 0);
+
+	if (status != MXT_RELEASE) {
+		input_report_abs(input_dev, ABS_X, finger[single_id].x);
+		input_report_abs(input_dev, ABS_Y, finger[single_id].y);
+	}
+
+	input_sync(input_dev);
+}
+
+static void mxt_input_touchevent(struct mxt_data *data,
+				      struct mxt_message *message, int id)
+{
+	struct mxt_finger *finger = data->finger;
+	struct device *dev = &data->client->dev;
+	u8 status = message->message[0];
+	int x;
+	int y;
+	int area;
+
+	/* Check the touch is present on the screen */
+	if (!(status & MXT_DETECT)) {
+		if (status & MXT_RELEASE) {
+			dev_dbg(dev, "[%d] released\n", id);
+
+			finger[id].status = MXT_RELEASE;
+			mxt_input_report(data, id);
+		}
+		return;
+	}
+
+	/* Check only AMP detection */
+	if (!(status & (MXT_PRESS | MXT_MOVE)))
+		return;
+
+	x = (message->message[1] << 2) | ((message->message[3] & ~0x3f) >> 6);
+	y = (message->message[2] << 2) | ((message->message[3] & ~0xf3) >> 2);
+	area = message->message[4];
+
+	dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id,
+		status & MXT_MOVE ? "moved" : "pressed",
+		x, y, area);
+
+	finger[id].status = status & MXT_MOVE ?
+				MXT_MOVE : MXT_PRESS;
+	finger[id].x = x;
+	finger[id].y = y;
+	finger[id].area = area;
+
+	mxt_input_report(data, id);
+}
+
+static irqreturn_t mxt_interrupt(int irq, void *dev_id)
+{
+	struct mxt_data *data = dev_id;
+	struct mxt_message message;
+	struct mxt_object *object;
+	struct device *dev = &data->client->dev;
+	int id;
+	u8 reportid;
+	u8 max_reportid;
+	u8 min_reportid;
+
+	do {
+		if (mxt_read_message(data, &message)) {
+			dev_err(dev, "Failed to read message\n");
+			goto end;
+		}
+
+		reportid = message.reportid;
+
+		/* whether reportid is thing of MXT_TOUCH_MULTI */
+		object = mxt_get_object(data, MXT_TOUCH_MULTI);
+		if (!object)
+			goto end;
+
+		max_reportid = object->max_reportid;
+		min_reportid = max_reportid - object->num_report_ids + 1;
+		id = reportid - min_reportid;
+
+		if (reportid >= min_reportid && reportid <= max_reportid)
+			mxt_input_touchevent(data, &message, id);
+		else
+			mxt_dump_message(dev, &message);
+	} while (reportid != 0xff);
+
+end:
+	return IRQ_HANDLED;
+}
+
+static int mxt_check_reg_init(struct mxt_data *data)
+{
+	const struct mxt_platform_data *pdata = data->pdata;
+	struct mxt_object *object;
+	struct device *dev = &data->client->dev;
+	int index = 0;
+	int i, j, config_offset;
+
+	if (!pdata->config) {
+		dev_dbg(dev, "No cfg data defined, skipping reg init\n");
+		return 0;
+	}
+
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+
+		if (!mxt_object_writable(object->type))
+			continue;
+
+		for (j = 0; j < object->size + 1; j++) {
+			config_offset = index + j;
+			if (config_offset > pdata->config_length) {
+				dev_err(dev, "Not enough config data!\n");
+				return -EINVAL;
+			}
+			mxt_write_object(data, object->type, j,
+					 pdata->config[config_offset]);
+		}
+		index += object->size + 1;
+	}
+
+	return 0;
+}
+
+static int mxt_make_highchg(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_message message;
+	int count = 10;
+	int error;
+
+	/* Read dummy message to make high CHG pin */
+	do {
+		error = mxt_read_message(data, &message);
+		if (error)
+			return error;
+	} while (message.reportid != 0xff && --count);
+
+	if (!count) {
+		dev_err(dev, "CHG pin isn't cleared\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void mxt_handle_pdata(struct mxt_data *data)
+{
+	const struct mxt_platform_data *pdata = data->pdata;
+	u8 voltage;
+
+	/* Set touchscreen lines */
+	mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_XSIZE,
+			pdata->x_line);
+	mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_YSIZE,
+			pdata->y_line);
+
+	/* Set touchscreen orient */
+	mxt_write_object(data, MXT_TOUCH_MULTI, MXT_TOUCH_ORIENT,
+			pdata->orient);
+
+	/* Set touchscreen burst length */
+	mxt_write_object(data, MXT_TOUCH_MULTI,
+			MXT_TOUCH_BLEN, pdata->blen);
+
+	/* Set touchscreen threshold */
+	mxt_write_object(data, MXT_TOUCH_MULTI,
+			MXT_TOUCH_TCHTHR, pdata->threshold);
+
+	/* Set touchscreen resolution */
+	mxt_write_object(data, MXT_TOUCH_MULTI,
+			MXT_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff);
+	mxt_write_object(data, MXT_TOUCH_MULTI,
+			MXT_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8);
+	mxt_write_object(data, MXT_TOUCH_MULTI,
+			MXT_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff);
+	mxt_write_object(data, MXT_TOUCH_MULTI,
+			MXT_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8);
+
+	/* Set touchscreen voltage */
+	if (pdata->voltage) {
+		if (pdata->voltage < MXT_VOLTAGE_DEFAULT) {
+			voltage = (MXT_VOLTAGE_DEFAULT - pdata->voltage) /
+				MXT_VOLTAGE_STEP;
+			voltage = 0xff - voltage + 1;
+		} else
+			voltage = (pdata->voltage - MXT_VOLTAGE_DEFAULT) /
+				MXT_VOLTAGE_STEP;
+
+		mxt_write_object(data, MXT_SPT_CTECONFIG,
+				MXT_CTE_VOLTAGE, voltage);
+	}
+}
+
+static int mxt_get_info(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	struct mxt_info *info = &data->info;
+	int error;
+	u8 val;
+
+	error = mxt_read_reg(client, MXT_FAMILY_ID, &val);
+	if (error)
+		return error;
+	info->family_id = val;
+
+	error = mxt_read_reg(client, MXT_VARIANT_ID, &val);
+	if (error)
+		return error;
+	info->variant_id = val;
+
+	error = mxt_read_reg(client, MXT_VERSION, &val);
+	if (error)
+		return error;
+	info->version = val;
+
+	error = mxt_read_reg(client, MXT_BUILD, &val);
+	if (error)
+		return error;
+	info->build = val;
+
+	error = mxt_read_reg(client, MXT_OBJECT_NUM, &val);
+	if (error)
+		return error;
+	info->object_num = val;
+
+	return 0;
+}
+
+static int mxt_get_object_table(struct mxt_data *data)
+{
+	int error;
+	int i;
+	u16 reg;
+	u8 reportid = 0;
+	u8 buf[MXT_OBJECT_SIZE];
+
+	for (i = 0; i < data->info.object_num; i++) {
+		struct mxt_object *object = data->object_table + i;
+
+		reg = MXT_OBJECT_START + MXT_OBJECT_SIZE * i;
+		error = mxt_read_object_table(data->client, reg, buf);
+		if (error)
+			return error;
+
+		object->type = buf[0];
+		object->start_address = (buf[2] << 8) | buf[1];
+		object->size = buf[3];
+		object->instances = buf[4];
+		object->num_report_ids = buf[5];
+
+		if (object->num_report_ids) {
+			reportid += object->num_report_ids *
+					(object->instances + 1);
+			object->max_reportid = reportid;
+		}
+	}
+
+	return 0;
+}
+
+static int mxt_initialize(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	struct mxt_info *info = &data->info;
+	int error;
+	u8 val;
+
+	error = mxt_get_info(data);
+	if (error)
+		return error;
+
+	data->object_table = kcalloc(info->object_num,
+				     sizeof(struct mxt_object),
+				     GFP_KERNEL);
+	if (!data->object_table) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	/* Get object table information */
+	error = mxt_get_object_table(data);
+	if (error)
+		return error;
+
+	/* Check register init values */
+	error = mxt_check_reg_init(data);
+	if (error)
+		return error;
+
+	error = mxt_make_highchg(data);
+	if (error)
+		return error;
+
+	mxt_handle_pdata(data);
+
+	/* Backup to memory */
+	mxt_write_object(data, MXT_GEN_COMMAND,
+			MXT_COMMAND_BACKUPNV,
+			MXT_BACKUP_VALUE);
+	msleep(MXT_BACKUP_TIME);
+
+	/* Soft reset */
+	mxt_write_object(data, MXT_GEN_COMMAND,
+			MXT_COMMAND_RESET, 1);
+	msleep(MXT_RESET_TIME);
+
+	/* Update matrix size at info struct */
+	error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
+	if (error)
+		return error;
+	info->matrix_xsize = val;
+
+	error = mxt_read_reg(client, MXT_MATRIX_Y_SIZE, &val);
+	if (error)
+		return error;
+	info->matrix_ysize = val;
+
+	dev_info(&client->dev,
+			"Family ID: %d Variant ID: %d Version: %d Build: %d\n",
+			info->family_id, info->variant_id, info->version,
+			info->build);
+
+	dev_info(&client->dev,
+			"Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n",
+			info->matrix_xsize, info->matrix_ysize,
+			info->object_num);
+
+	return 0;
+}
+
+static ssize_t mxt_object_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_object *object;
+	int count = 0;
+	int i, j;
+	int error;
+	u8 val;
+
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+
+		count += sprintf(buf + count,
+				"Object Table Element %d(Type %d)\n",
+				i + 1, object->type);
+
+		if (!mxt_object_readable(object->type)) {
+			count += sprintf(buf + count, "\n");
+			continue;
+		}
+
+		for (j = 0; j < object->size + 1; j++) {
+			error = mxt_read_object(data,
+						object->type, j, &val);
+			if (error)
+				return error;
+
+			count += sprintf(buf + count,
+					"  Byte %d: 0x%x (%d)\n", j, val, val);
+		}
+
+		count += sprintf(buf + count, "\n");
+	}
+
+	return count;
+}
+
+static int mxt_load_fw(struct device *dev, const char *fn)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	const struct firmware *fw = NULL;
+	unsigned int frame_size;
+	unsigned int pos = 0;
+	int ret;
+
+	ret = request_firmware(&fw, fn, dev);
+	if (ret) {
+		dev_err(dev, "Unable to open firmware %s\n", fn);
+		return ret;
+	}
+
+	/* Change to the bootloader mode */
+	mxt_write_object(data, MXT_GEN_COMMAND,
+			MXT_COMMAND_RESET, MXT_BOOT_VALUE);
+	msleep(MXT_RESET_TIME);
+
+	/* Change to slave address of bootloader */
+	if (client->addr == MXT_APP_LOW)
+		client->addr = MXT_BOOT_LOW;
+	else
+		client->addr = MXT_BOOT_HIGH;
+
+	ret = mxt_check_bootloader(client, MXT_WAITING_BOOTLOAD_CMD);
+	if (ret)
+		goto out;
+
+	/* Unlock bootloader */
+	mxt_unlock_bootloader(client);
+
+	while (pos < fw->size) {
+		ret = mxt_check_bootloader(client,
+						MXT_WAITING_FRAME_DATA);
+		if (ret)
+			goto out;
+
+		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
+
+		/* We should add 2 at frame size as the the firmware data is not
+		 * included the CRC bytes.
+		 */
+		frame_size += 2;
+
+		/* Write one frame to device */
+		mxt_fw_write(client, fw->data + pos, frame_size);
+
+		ret = mxt_check_bootloader(client,
+						MXT_FRAME_CRC_PASS);
+		if (ret)
+			goto out;
+
+		pos += frame_size;
+
+		dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size);
+	}
+
+out:
+	release_firmware(fw);
+
+	/* Change to slave address of application */
+	if (client->addr == MXT_BOOT_LOW)
+		client->addr = MXT_APP_LOW;
+	else
+		client->addr = MXT_APP_HIGH;
+
+	return ret;
+}
+
+static ssize_t mxt_update_fw_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	int error;
+
+	disable_irq(data->irq);
+
+	error = mxt_load_fw(dev, MXT_FW_NAME);
+	if (error) {
+		dev_err(dev, "The firmware update failed(%d)\n", error);
+		count = error;
+	} else {
+		dev_dbg(dev, "The firmware update succeeded\n");
+
+		/* Wait for reset */
+		msleep(MXT_FWRESET_TIME);
+
+		kfree(data->object_table);
+		data->object_table = NULL;
+
+		mxt_initialize(data);
+	}
+
+	enable_irq(data->irq);
+
+	return count;
+}
+
+static DEVICE_ATTR(object, 0444, mxt_object_show, NULL);
+static DEVICE_ATTR(update_fw, 0664, NULL, mxt_update_fw_store);
+
+static struct attribute *mxt_attrs[] = {
+	&dev_attr_object.attr,
+	&dev_attr_update_fw.attr,
+	NULL
+};
+
+static const struct attribute_group mxt_attr_group = {
+	.attrs = mxt_attrs,
+};
+
+static void mxt_start(struct mxt_data *data)
+{
+	/* Touch enable */
+	mxt_write_object(data,
+			MXT_TOUCH_MULTI, MXT_TOUCH_CTRL, 0x83);
+}
+
+static void mxt_stop(struct mxt_data *data)
+{
+	/* Touch disable */
+	mxt_write_object(data,
+			MXT_TOUCH_MULTI, MXT_TOUCH_CTRL, 0);
+}
+
+static int mxt_input_open(struct input_dev *dev)
+{
+	struct mxt_data *data = input_get_drvdata(dev);
+
+	mxt_start(data);
+
+	return 0;
+}
+
+static void mxt_input_close(struct input_dev *dev)
+{
+	struct mxt_data *data = input_get_drvdata(dev);
+
+	mxt_stop(data);
+}
+
+static int __devinit mxt_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	const struct mxt_platform_data *pdata = client->dev.platform_data;
+	struct mxt_data *data;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!pdata)
+		return -EINVAL;
+
+	data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	input_dev->name = "Atmel maXTouch Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->open = mxt_input_open;
+	input_dev->close = mxt_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X,
+			     0, MXT_MAX_XC, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			     0, MXT_MAX_YC, 0, 0);
+
+	/* For multi touch */
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, MXT_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, MXT_MAX_XC, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, MXT_MAX_YC, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	data->client = client;
+	data->input_dev = input_dev;
+	data->pdata = pdata;
+	data->irq = client->irq;
+
+	i2c_set_clientdata(client, data);
+
+	error = mxt_initialize(data);
+	if (error)
+		goto err_free_object;
+
+	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
+			pdata->irqflags, client->dev.driver->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_object;
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_irq;
+
+	error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
+	if (error)
+		goto err_unregister_device;
+
+	return 0;
+
+err_unregister_device:
+	input_unregister_device(input_dev);
+	input_dev = NULL;
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_object:
+	kfree(data->object_table);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return error;
+}
+
+static int __devexit mxt_remove(struct i2c_client *client)
+{
+	struct mxt_data *data = i2c_get_clientdata(client);
+
+	sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
+	free_irq(data->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data->object_table);
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mxt_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mxt_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		mxt_stop(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int mxt_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mxt_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	/* Soft reset */
+	mxt_write_object(data, MXT_GEN_COMMAND,
+			MXT_COMMAND_RESET, 1);
+
+	msleep(MXT_RESET_TIME);
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		mxt_start(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mxt_pm_ops = {
+	.suspend	= mxt_suspend,
+	.resume		= mxt_resume,
+};
+#endif
+
+static const struct i2c_device_id mxt_id[] = {
+	{ "qt602240_ts", 0 },
+	{ "atmel_mxt_ts", 0 },
+	{ "mXT224", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mxt_id);
+
+static struct i2c_driver mxt_driver = {
+	.driver = {
+		.name	= "atmel_mxt_ts",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &mxt_pm_ops,
+#endif
+	},
+	.probe		= mxt_probe,
+	.remove		= __devexit_p(mxt_remove),
+	.id_table	= mxt_id,
+};
+
+static int __init mxt_init(void)
+{
+	return i2c_add_driver(&mxt_driver);
+}
+
+static void __exit mxt_exit(void)
+{
+	i2c_del_driver(&mxt_driver);
+}
+
+module_init(mxt_init);
+module_exit(mxt_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/qt602240_ts.c b/drivers/input/touchscreen/qt602240_ts.c
deleted file mode 100644
index 4dcb0e872f6a..000000000000
--- a/drivers/input/touchscreen/qt602240_ts.c
+++ /dev/null
@@ -1,1406 +0,0 @@
-/*
- * AT42QT602240/ATMXT224 Touchscreen driver
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/i2c.h>
-#include <linux/i2c/qt602240_ts.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-
-/* Version */
-#define QT602240_VER_20			20
-#define QT602240_VER_21			21
-#define QT602240_VER_22			22
-
-/* Slave addresses */
-#define QT602240_APP_LOW		0x4a
-#define QT602240_APP_HIGH		0x4b
-#define QT602240_BOOT_LOW		0x24
-#define QT602240_BOOT_HIGH		0x25
-
-/* Firmware */
-#define QT602240_FW_NAME		"qt602240.fw"
-
-/* Registers */
-#define QT602240_FAMILY_ID		0x00
-#define QT602240_VARIANT_ID		0x01
-#define QT602240_VERSION		0x02
-#define QT602240_BUILD			0x03
-#define QT602240_MATRIX_X_SIZE		0x04
-#define QT602240_MATRIX_Y_SIZE		0x05
-#define QT602240_OBJECT_NUM		0x06
-#define QT602240_OBJECT_START		0x07
-
-#define QT602240_OBJECT_SIZE		6
-
-/* Object types */
-#define QT602240_DEBUG_DIAGNOSTIC	37
-#define QT602240_GEN_MESSAGE		5
-#define QT602240_GEN_COMMAND		6
-#define QT602240_GEN_POWER		7
-#define QT602240_GEN_ACQUIRE		8
-#define QT602240_TOUCH_MULTI		9
-#define QT602240_TOUCH_KEYARRAY		15
-#define QT602240_TOUCH_PROXIMITY	23
-#define QT602240_PROCI_GRIPFACE		20
-#define QT602240_PROCG_NOISE		22
-#define QT602240_PROCI_ONETOUCH		24
-#define QT602240_PROCI_TWOTOUCH		27
-#define QT602240_SPT_COMMSCONFIG	18	/* firmware ver 21 over */
-#define QT602240_SPT_GPIOPWM		19
-#define QT602240_SPT_SELFTEST		25
-#define QT602240_SPT_CTECONFIG		28
-#define QT602240_SPT_USERDATA		38	/* firmware ver 21 over */
-
-/* QT602240_GEN_COMMAND field */
-#define QT602240_COMMAND_RESET		0
-#define QT602240_COMMAND_BACKUPNV	1
-#define QT602240_COMMAND_CALIBRATE	2
-#define QT602240_COMMAND_REPORTALL	3
-#define QT602240_COMMAND_DIAGNOSTIC	5
-
-/* QT602240_GEN_POWER field */
-#define QT602240_POWER_IDLEACQINT	0
-#define QT602240_POWER_ACTVACQINT	1
-#define QT602240_POWER_ACTV2IDLETO	2
-
-/* QT602240_GEN_ACQUIRE field */
-#define QT602240_ACQUIRE_CHRGTIME	0
-#define QT602240_ACQUIRE_TCHDRIFT	2
-#define QT602240_ACQUIRE_DRIFTST	3
-#define QT602240_ACQUIRE_TCHAUTOCAL	4
-#define QT602240_ACQUIRE_SYNC		5
-#define QT602240_ACQUIRE_ATCHCALST	6
-#define QT602240_ACQUIRE_ATCHCALSTHR	7
-
-/* QT602240_TOUCH_MULTI field */
-#define QT602240_TOUCH_CTRL		0
-#define QT602240_TOUCH_XORIGIN		1
-#define QT602240_TOUCH_YORIGIN		2
-#define QT602240_TOUCH_XSIZE		3
-#define QT602240_TOUCH_YSIZE		4
-#define QT602240_TOUCH_BLEN		6
-#define QT602240_TOUCH_TCHTHR		7
-#define QT602240_TOUCH_TCHDI		8
-#define QT602240_TOUCH_ORIENT		9
-#define QT602240_TOUCH_MOVHYSTI		11
-#define QT602240_TOUCH_MOVHYSTN		12
-#define QT602240_TOUCH_NUMTOUCH		14
-#define QT602240_TOUCH_MRGHYST		15
-#define QT602240_TOUCH_MRGTHR		16
-#define QT602240_TOUCH_AMPHYST		17
-#define QT602240_TOUCH_XRANGE_LSB	18
-#define QT602240_TOUCH_XRANGE_MSB	19
-#define QT602240_TOUCH_YRANGE_LSB	20
-#define QT602240_TOUCH_YRANGE_MSB	21
-#define QT602240_TOUCH_XLOCLIP		22
-#define QT602240_TOUCH_XHICLIP		23
-#define QT602240_TOUCH_YLOCLIP		24
-#define QT602240_TOUCH_YHICLIP		25
-#define QT602240_TOUCH_XEDGECTRL	26
-#define QT602240_TOUCH_XEDGEDIST	27
-#define QT602240_TOUCH_YEDGECTRL	28
-#define QT602240_TOUCH_YEDGEDIST	29
-#define QT602240_TOUCH_JUMPLIMIT	30	/* firmware ver 22 over */
-
-/* QT602240_PROCI_GRIPFACE field */
-#define QT602240_GRIPFACE_CTRL		0
-#define QT602240_GRIPFACE_XLOGRIP	1
-#define QT602240_GRIPFACE_XHIGRIP	2
-#define QT602240_GRIPFACE_YLOGRIP	3
-#define QT602240_GRIPFACE_YHIGRIP	4
-#define QT602240_GRIPFACE_MAXTCHS	5
-#define QT602240_GRIPFACE_SZTHR1	7
-#define QT602240_GRIPFACE_SZTHR2	8
-#define QT602240_GRIPFACE_SHPTHR1	9
-#define QT602240_GRIPFACE_SHPTHR2	10
-#define QT602240_GRIPFACE_SUPEXTTO	11
-
-/* QT602240_PROCI_NOISE field */
-#define QT602240_NOISE_CTRL		0
-#define QT602240_NOISE_OUTFLEN		1
-#define QT602240_NOISE_GCAFUL_LSB	3
-#define QT602240_NOISE_GCAFUL_MSB	4
-#define QT602240_NOISE_GCAFLL_LSB	5
-#define QT602240_NOISE_GCAFLL_MSB	6
-#define QT602240_NOISE_ACTVGCAFVALID	7
-#define QT602240_NOISE_NOISETHR		8
-#define QT602240_NOISE_FREQHOPSCALE	10
-#define QT602240_NOISE_FREQ0		11
-#define QT602240_NOISE_FREQ1		12
-#define QT602240_NOISE_FREQ2		13
-#define QT602240_NOISE_FREQ3		14
-#define QT602240_NOISE_FREQ4		15
-#define QT602240_NOISE_IDLEGCAFVALID	16
-
-/* QT602240_SPT_COMMSCONFIG */
-#define QT602240_COMMS_CTRL		0
-#define QT602240_COMMS_CMD		1
-
-/* QT602240_SPT_CTECONFIG field */
-#define QT602240_CTE_CTRL		0
-#define QT602240_CTE_CMD		1
-#define QT602240_CTE_MODE		2
-#define QT602240_CTE_IDLEGCAFDEPTH	3
-#define QT602240_CTE_ACTVGCAFDEPTH	4
-#define QT602240_CTE_VOLTAGE		5	/* firmware ver 21 over */
-
-#define QT602240_VOLTAGE_DEFAULT	2700000
-#define QT602240_VOLTAGE_STEP		10000
-
-/* Define for QT602240_GEN_COMMAND */
-#define QT602240_BOOT_VALUE		0xa5
-#define QT602240_BACKUP_VALUE		0x55
-#define QT602240_BACKUP_TIME		25	/* msec */
-#define QT602240_RESET_TIME		65	/* msec */
-
-#define QT602240_FWRESET_TIME		175	/* msec */
-
-/* Command to unlock bootloader */
-#define QT602240_UNLOCK_CMD_MSB		0xaa
-#define QT602240_UNLOCK_CMD_LSB		0xdc
-
-/* Bootloader mode status */
-#define QT602240_WAITING_BOOTLOAD_CMD	0xc0	/* valid 7 6 bit only */
-#define QT602240_WAITING_FRAME_DATA	0x80	/* valid 7 6 bit only */
-#define QT602240_FRAME_CRC_CHECK	0x02
-#define QT602240_FRAME_CRC_FAIL		0x03
-#define QT602240_FRAME_CRC_PASS		0x04
-#define QT602240_APP_CRC_FAIL		0x40	/* valid 7 8 bit only */
-#define QT602240_BOOT_STATUS_MASK	0x3f
-
-/* Touch status */
-#define QT602240_SUPPRESS		(1 << 1)
-#define QT602240_AMP			(1 << 2)
-#define QT602240_VECTOR			(1 << 3)
-#define QT602240_MOVE			(1 << 4)
-#define QT602240_RELEASE		(1 << 5)
-#define QT602240_PRESS			(1 << 6)
-#define QT602240_DETECT			(1 << 7)
-
-/* Touchscreen absolute values */
-#define QT602240_MAX_XC			0x3ff
-#define QT602240_MAX_YC			0x3ff
-#define QT602240_MAX_AREA		0xff
-
-#define QT602240_MAX_FINGER		10
-
-/* Initial register values recommended from chip vendor */
-static const u8 init_vals_ver_20[] = {
-	/* QT602240_GEN_COMMAND(6) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_GEN_POWER(7) */
-	0x20, 0xff, 0x32,
-	/* QT602240_GEN_ACQUIRE(8) */
-	0x08, 0x05, 0x05, 0x00, 0x00, 0x00, 0x05, 0x14,
-	/* QT602240_TOUCH_MULTI(9) */
-	0x00, 0x00, 0x00, 0x11, 0x0a, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x64,
-	/* QT602240_TOUCH_KEYARRAY(15) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00,
-	/* QT602240_SPT_GPIOPWM(19) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00,
-	/* QT602240_PROCI_GRIPFACE(20) */
-	0x00, 0x64, 0x64, 0x64, 0x64, 0x00, 0x00, 0x1e, 0x14, 0x04,
-	0x1e, 0x00,
-	/* QT602240_PROCG_NOISE(22) */
-	0x05, 0x00, 0x00, 0x19, 0x00, 0xe7, 0xff, 0x04, 0x32, 0x00,
-	0x01, 0x0a, 0x0f, 0x14, 0x00, 0x00, 0xe8,
-	/* QT602240_TOUCH_PROXIMITY(23) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00,
-	/* QT602240_PROCI_ONETOUCH(24) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_SPT_SELFTEST(25) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	/* QT602240_PROCI_TWOTOUCH(27) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_SPT_CTECONFIG(28) */
-	0x00, 0x00, 0x00, 0x04, 0x08,
-};
-
-static const u8 init_vals_ver_21[] = {
-	/* QT602240_GEN_COMMAND(6) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_GEN_POWER(7) */
-	0x20, 0xff, 0x32,
-	/* QT602240_GEN_ACQUIRE(8) */
-	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
-	/* QT602240_TOUCH_MULTI(9) */
-	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_TOUCH_KEYARRAY(15) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00,
-	/* QT602240_SPT_GPIOPWM(19) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_PROCI_GRIPFACE(20) */
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
-	0x0f, 0x0a,
-	/* QT602240_PROCG_NOISE(22) */
-	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
-	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
-	/* QT602240_TOUCH_PROXIMITY(23) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00,
-	/* QT602240_PROCI_ONETOUCH(24) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_SPT_SELFTEST(25) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	/* QT602240_PROCI_TWOTOUCH(27) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_SPT_CTECONFIG(28) */
-	0x00, 0x00, 0x00, 0x08, 0x10, 0x00,
-};
-
-static const u8 init_vals_ver_22[] = {
-	/* QT602240_GEN_COMMAND(6) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_GEN_POWER(7) */
-	0x20, 0xff, 0x32,
-	/* QT602240_GEN_ACQUIRE(8) */
-	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
-	/* QT602240_TOUCH_MULTI(9) */
-	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00,
-	/* QT602240_TOUCH_KEYARRAY(15) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00,
-	/* QT602240_SPT_GPIOPWM(19) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_PROCI_GRIPFACE(20) */
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
-	0x0f, 0x0a,
-	/* QT602240_PROCG_NOISE(22) */
-	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
-	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
-	/* QT602240_TOUCH_PROXIMITY(23) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_PROCI_ONETOUCH(24) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_SPT_SELFTEST(25) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	/* QT602240_PROCI_TWOTOUCH(27) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* QT602240_SPT_CTECONFIG(28) */
-	0x00, 0x00, 0x00, 0x08, 0x10, 0x00,
-};
-
-struct qt602240_info {
-	u8 family_id;
-	u8 variant_id;
-	u8 version;
-	u8 build;
-	u8 matrix_xsize;
-	u8 matrix_ysize;
-	u8 object_num;
-};
-
-struct qt602240_object {
-	u8 type;
-	u16 start_address;
-	u8 size;
-	u8 instances;
-	u8 num_report_ids;
-
-	/* to map object and message */
-	u8 max_reportid;
-};
-
-struct qt602240_message {
-	u8 reportid;
-	u8 message[7];
-	u8 checksum;
-};
-
-struct qt602240_finger {
-	int status;
-	int x;
-	int y;
-	int area;
-};
-
-/* Each client has this additional data */
-struct qt602240_data {
-	struct i2c_client *client;
-	struct input_dev *input_dev;
-	const struct qt602240_platform_data *pdata;
-	struct qt602240_object *object_table;
-	struct qt602240_info info;
-	struct qt602240_finger finger[QT602240_MAX_FINGER];
-	unsigned int irq;
-};
-
-static bool qt602240_object_readable(unsigned int type)
-{
-	switch (type) {
-	case QT602240_GEN_MESSAGE:
-	case QT602240_GEN_COMMAND:
-	case QT602240_GEN_POWER:
-	case QT602240_GEN_ACQUIRE:
-	case QT602240_TOUCH_MULTI:
-	case QT602240_TOUCH_KEYARRAY:
-	case QT602240_TOUCH_PROXIMITY:
-	case QT602240_PROCI_GRIPFACE:
-	case QT602240_PROCG_NOISE:
-	case QT602240_PROCI_ONETOUCH:
-	case QT602240_PROCI_TWOTOUCH:
-	case QT602240_SPT_COMMSCONFIG:
-	case QT602240_SPT_GPIOPWM:
-	case QT602240_SPT_SELFTEST:
-	case QT602240_SPT_CTECONFIG:
-	case QT602240_SPT_USERDATA:
-		return true;
-	default:
-		return false;
-	}
-}
-
-static bool qt602240_object_writable(unsigned int type)
-{
-	switch (type) {
-	case QT602240_GEN_COMMAND:
-	case QT602240_GEN_POWER:
-	case QT602240_GEN_ACQUIRE:
-	case QT602240_TOUCH_MULTI:
-	case QT602240_TOUCH_KEYARRAY:
-	case QT602240_TOUCH_PROXIMITY:
-	case QT602240_PROCI_GRIPFACE:
-	case QT602240_PROCG_NOISE:
-	case QT602240_PROCI_ONETOUCH:
-	case QT602240_PROCI_TWOTOUCH:
-	case QT602240_SPT_GPIOPWM:
-	case QT602240_SPT_SELFTEST:
-	case QT602240_SPT_CTECONFIG:
-		return true;
-	default:
-		return false;
-	}
-}
-
-static void qt602240_dump_message(struct device *dev,
-				  struct qt602240_message *message)
-{
-	dev_dbg(dev, "reportid:\t0x%x\n", message->reportid);
-	dev_dbg(dev, "message1:\t0x%x\n", message->message[0]);
-	dev_dbg(dev, "message2:\t0x%x\n", message->message[1]);
-	dev_dbg(dev, "message3:\t0x%x\n", message->message[2]);
-	dev_dbg(dev, "message4:\t0x%x\n", message->message[3]);
-	dev_dbg(dev, "message5:\t0x%x\n", message->message[4]);
-	dev_dbg(dev, "message6:\t0x%x\n", message->message[5]);
-	dev_dbg(dev, "message7:\t0x%x\n", message->message[6]);
-	dev_dbg(dev, "checksum:\t0x%x\n", message->checksum);
-}
-
-static int qt602240_check_bootloader(struct i2c_client *client,
-				     unsigned int state)
-{
-	u8 val;
-
-recheck:
-	if (i2c_master_recv(client, &val, 1) != 1) {
-		dev_err(&client->dev, "%s: i2c recv failed\n", __func__);
-		return -EIO;
-	}
-
-	switch (state) {
-	case QT602240_WAITING_BOOTLOAD_CMD:
-	case QT602240_WAITING_FRAME_DATA:
-		val &= ~QT602240_BOOT_STATUS_MASK;
-		break;
-	case QT602240_FRAME_CRC_PASS:
-		if (val == QT602240_FRAME_CRC_CHECK)
-			goto recheck;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (val != state) {
-		dev_err(&client->dev, "Unvalid bootloader mode state\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int qt602240_unlock_bootloader(struct i2c_client *client)
-{
-	u8 buf[2];
-
-	buf[0] = QT602240_UNLOCK_CMD_LSB;
-	buf[1] = QT602240_UNLOCK_CMD_MSB;
-
-	if (i2c_master_send(client, buf, 2) != 2) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int qt602240_fw_write(struct i2c_client *client,
-			     const u8 *data, unsigned int frame_size)
-{
-	if (i2c_master_send(client, data, frame_size) != frame_size) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int __qt602240_read_reg(struct i2c_client *client,
-			       u16 reg, u16 len, void *val)
-{
-	struct i2c_msg xfer[2];
-	u8 buf[2];
-
-	buf[0] = reg & 0xff;
-	buf[1] = (reg >> 8) & 0xff;
-
-	/* Write register */
-	xfer[0].addr = client->addr;
-	xfer[0].flags = 0;
-	xfer[0].len = 2;
-	xfer[0].buf = buf;
-
-	/* Read data */
-	xfer[1].addr = client->addr;
-	xfer[1].flags = I2C_M_RD;
-	xfer[1].len = len;
-	xfer[1].buf = val;
-
-	if (i2c_transfer(client->adapter, xfer, 2) != 2) {
-		dev_err(&client->dev, "%s: i2c transfer failed\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int qt602240_read_reg(struct i2c_client *client, u16 reg, u8 *val)
-{
-	return __qt602240_read_reg(client, reg, 1, val);
-}
-
-static int qt602240_write_reg(struct i2c_client *client, u16 reg, u8 val)
-{
-	u8 buf[3];
-
-	buf[0] = reg & 0xff;
-	buf[1] = (reg >> 8) & 0xff;
-	buf[2] = val;
-
-	if (i2c_master_send(client, buf, 3) != 3) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int qt602240_read_object_table(struct i2c_client *client,
-				      u16 reg, u8 *object_buf)
-{
-	return __qt602240_read_reg(client, reg, QT602240_OBJECT_SIZE,
-				   object_buf);
-}
-
-static struct qt602240_object *
-qt602240_get_object(struct qt602240_data *data, u8 type)
-{
-	struct qt602240_object *object;
-	int i;
-
-	for (i = 0; i < data->info.object_num; i++) {
-		object = data->object_table + i;
-		if (object->type == type)
-			return object;
-	}
-
-	dev_err(&data->client->dev, "Invalid object type\n");
-	return NULL;
-}
-
-static int qt602240_read_message(struct qt602240_data *data,
-				 struct qt602240_message *message)
-{
-	struct qt602240_object *object;
-	u16 reg;
-
-	object = qt602240_get_object(data, QT602240_GEN_MESSAGE);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return __qt602240_read_reg(data->client, reg,
-			sizeof(struct qt602240_message), message);
-}
-
-static int qt602240_read_object(struct qt602240_data *data,
-				u8 type, u8 offset, u8 *val)
-{
-	struct qt602240_object *object;
-	u16 reg;
-
-	object = qt602240_get_object(data, type);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return __qt602240_read_reg(data->client, reg + offset, 1, val);
-}
-
-static int qt602240_write_object(struct qt602240_data *data,
-				 u8 type, u8 offset, u8 val)
-{
-	struct qt602240_object *object;
-	u16 reg;
-
-	object = qt602240_get_object(data, type);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return qt602240_write_reg(data->client, reg + offset, val);
-}
-
-static void qt602240_input_report(struct qt602240_data *data, int single_id)
-{
-	struct qt602240_finger *finger = data->finger;
-	struct input_dev *input_dev = data->input_dev;
-	int status = finger[single_id].status;
-	int finger_num = 0;
-	int id;
-
-	for (id = 0; id < QT602240_MAX_FINGER; id++) {
-		if (!finger[id].status)
-			continue;
-
-		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
-				finger[id].status != QT602240_RELEASE ?
-				finger[id].area : 0);
-		input_report_abs(input_dev, ABS_MT_POSITION_X,
-				finger[id].x);
-		input_report_abs(input_dev, ABS_MT_POSITION_Y,
-				finger[id].y);
-		input_mt_sync(input_dev);
-
-		if (finger[id].status == QT602240_RELEASE)
-			finger[id].status = 0;
-		else
-			finger_num++;
-	}
-
-	input_report_key(input_dev, BTN_TOUCH, finger_num > 0);
-
-	if (status != QT602240_RELEASE) {
-		input_report_abs(input_dev, ABS_X, finger[single_id].x);
-		input_report_abs(input_dev, ABS_Y, finger[single_id].y);
-	}
-
-	input_sync(input_dev);
-}
-
-static void qt602240_input_touchevent(struct qt602240_data *data,
-				      struct qt602240_message *message, int id)
-{
-	struct qt602240_finger *finger = data->finger;
-	struct device *dev = &data->client->dev;
-	u8 status = message->message[0];
-	int x;
-	int y;
-	int area;
-
-	/* Check the touch is present on the screen */
-	if (!(status & QT602240_DETECT)) {
-		if (status & QT602240_RELEASE) {
-			dev_dbg(dev, "[%d] released\n", id);
-
-			finger[id].status = QT602240_RELEASE;
-			qt602240_input_report(data, id);
-		}
-		return;
-	}
-
-	/* Check only AMP detection */
-	if (!(status & (QT602240_PRESS | QT602240_MOVE)))
-		return;
-
-	x = (message->message[1] << 2) | ((message->message[3] & ~0x3f) >> 6);
-	y = (message->message[2] << 2) | ((message->message[3] & ~0xf3) >> 2);
-	area = message->message[4];
-
-	dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id,
-		status & QT602240_MOVE ? "moved" : "pressed",
-		x, y, area);
-
-	finger[id].status = status & QT602240_MOVE ?
-				QT602240_MOVE : QT602240_PRESS;
-	finger[id].x = x;
-	finger[id].y = y;
-	finger[id].area = area;
-
-	qt602240_input_report(data, id);
-}
-
-static irqreturn_t qt602240_interrupt(int irq, void *dev_id)
-{
-	struct qt602240_data *data = dev_id;
-	struct qt602240_message message;
-	struct qt602240_object *object;
-	struct device *dev = &data->client->dev;
-	int id;
-	u8 reportid;
-	u8 max_reportid;
-	u8 min_reportid;
-
-	do {
-		if (qt602240_read_message(data, &message)) {
-			dev_err(dev, "Failed to read message\n");
-			goto end;
-		}
-
-		reportid = message.reportid;
-
-		/* whether reportid is thing of QT602240_TOUCH_MULTI */
-		object = qt602240_get_object(data, QT602240_TOUCH_MULTI);
-		if (!object)
-			goto end;
-
-		max_reportid = object->max_reportid;
-		min_reportid = max_reportid - object->num_report_ids + 1;
-		id = reportid - min_reportid;
-
-		if (reportid >= min_reportid && reportid <= max_reportid)
-			qt602240_input_touchevent(data, &message, id);
-		else
-			qt602240_dump_message(dev, &message);
-	} while (reportid != 0xff);
-
-end:
-	return IRQ_HANDLED;
-}
-
-static int qt602240_check_reg_init(struct qt602240_data *data)
-{
-	struct qt602240_object *object;
-	struct device *dev = &data->client->dev;
-	int index = 0;
-	int i, j;
-	u8 version = data->info.version;
-	u8 *init_vals;
-
-	switch (version) {
-	case QT602240_VER_20:
-		init_vals = (u8 *)init_vals_ver_20;
-		break;
-	case QT602240_VER_21:
-		init_vals = (u8 *)init_vals_ver_21;
-		break;
-	case QT602240_VER_22:
-		init_vals = (u8 *)init_vals_ver_22;
-		break;
-	default:
-		dev_err(dev, "Firmware version %d doesn't support\n", version);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < data->info.object_num; i++) {
-		object = data->object_table + i;
-
-		if (!qt602240_object_writable(object->type))
-			continue;
-
-		for (j = 0; j < object->size + 1; j++)
-			qt602240_write_object(data, object->type, j,
-					init_vals[index + j]);
-
-		index += object->size + 1;
-	}
-
-	return 0;
-}
-
-static int qt602240_check_matrix_size(struct qt602240_data *data)
-{
-	const struct qt602240_platform_data *pdata = data->pdata;
-	struct device *dev = &data->client->dev;
-	int mode = -1;
-	int error;
-	u8 val;
-
-	dev_dbg(dev, "Number of X lines: %d\n", pdata->x_line);
-	dev_dbg(dev, "Number of Y lines: %d\n", pdata->y_line);
-
-	switch (pdata->x_line) {
-	case 0 ... 15:
-		if (pdata->y_line <= 14)
-			mode = 0;
-		break;
-	case 16:
-		if (pdata->y_line <= 12)
-			mode = 1;
-		if (pdata->y_line == 13 || pdata->y_line == 14)
-			mode = 0;
-		break;
-	case 17:
-		if (pdata->y_line <= 11)
-			mode = 2;
-		if (pdata->y_line == 12 || pdata->y_line == 13)
-			mode = 1;
-		break;
-	case 18:
-		if (pdata->y_line <= 10)
-			mode = 3;
-		if (pdata->y_line == 11 || pdata->y_line == 12)
-			mode = 2;
-		break;
-	case 19:
-		if (pdata->y_line <= 9)
-			mode = 4;
-		if (pdata->y_line == 10 || pdata->y_line == 11)
-			mode = 3;
-		break;
-	case 20:
-		mode = 4;
-	}
-
-	if (mode < 0) {
-		dev_err(dev, "Invalid X/Y lines\n");
-		return -EINVAL;
-	}
-
-	error = qt602240_read_object(data, QT602240_SPT_CTECONFIG,
-				QT602240_CTE_MODE, &val);
-	if (error)
-		return error;
-
-	if (mode == val)
-		return 0;
-
-	/* Change the CTE configuration */
-	qt602240_write_object(data, QT602240_SPT_CTECONFIG,
-			QT602240_CTE_CTRL, 1);
-	qt602240_write_object(data, QT602240_SPT_CTECONFIG,
-			QT602240_CTE_MODE, mode);
-	qt602240_write_object(data, QT602240_SPT_CTECONFIG,
-			QT602240_CTE_CTRL, 0);
-
-	return 0;
-}
-
-static int qt602240_make_highchg(struct qt602240_data *data)
-{
-	struct device *dev = &data->client->dev;
-	int count = 10;
-	int error;
-	u8 val;
-
-	/* Read dummy message to make high CHG pin */
-	do {
-		error = qt602240_read_object(data, QT602240_GEN_MESSAGE, 0, &val);
-		if (error)
-			return error;
-	} while ((val != 0xff) && --count);
-
-	if (!count) {
-		dev_err(dev, "CHG pin isn't cleared\n");
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-static void qt602240_handle_pdata(struct qt602240_data *data)
-{
-	const struct qt602240_platform_data *pdata = data->pdata;
-	u8 voltage;
-
-	/* Set touchscreen lines */
-	qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_XSIZE,
-			pdata->x_line);
-	qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_YSIZE,
-			pdata->y_line);
-
-	/* Set touchscreen orient */
-	qt602240_write_object(data, QT602240_TOUCH_MULTI, QT602240_TOUCH_ORIENT,
-			pdata->orient);
-
-	/* Set touchscreen burst length */
-	qt602240_write_object(data, QT602240_TOUCH_MULTI,
-			QT602240_TOUCH_BLEN, pdata->blen);
-
-	/* Set touchscreen threshold */
-	qt602240_write_object(data, QT602240_TOUCH_MULTI,
-			QT602240_TOUCH_TCHTHR, pdata->threshold);
-
-	/* Set touchscreen resolution */
-	qt602240_write_object(data, QT602240_TOUCH_MULTI,
-			QT602240_TOUCH_XRANGE_LSB, (pdata->x_size - 1) & 0xff);
-	qt602240_write_object(data, QT602240_TOUCH_MULTI,
-			QT602240_TOUCH_XRANGE_MSB, (pdata->x_size - 1) >> 8);
-	qt602240_write_object(data, QT602240_TOUCH_MULTI,
-			QT602240_TOUCH_YRANGE_LSB, (pdata->y_size - 1) & 0xff);
-	qt602240_write_object(data, QT602240_TOUCH_MULTI,
-			QT602240_TOUCH_YRANGE_MSB, (pdata->y_size - 1) >> 8);
-
-	/* Set touchscreen voltage */
-	if (data->info.version >= QT602240_VER_21 && pdata->voltage) {
-		if (pdata->voltage < QT602240_VOLTAGE_DEFAULT) {
-			voltage = (QT602240_VOLTAGE_DEFAULT - pdata->voltage) /
-				QT602240_VOLTAGE_STEP;
-			voltage = 0xff - voltage + 1;
-		} else
-			voltage = (pdata->voltage - QT602240_VOLTAGE_DEFAULT) /
-				QT602240_VOLTAGE_STEP;
-
-		qt602240_write_object(data, QT602240_SPT_CTECONFIG,
-				QT602240_CTE_VOLTAGE, voltage);
-	}
-}
-
-static int qt602240_get_info(struct qt602240_data *data)
-{
-	struct i2c_client *client = data->client;
-	struct qt602240_info *info = &data->info;
-	int error;
-	u8 val;
-
-	error = qt602240_read_reg(client, QT602240_FAMILY_ID, &val);
-	if (error)
-		return error;
-	info->family_id = val;
-
-	error = qt602240_read_reg(client, QT602240_VARIANT_ID, &val);
-	if (error)
-		return error;
-	info->variant_id = val;
-
-	error = qt602240_read_reg(client, QT602240_VERSION, &val);
-	if (error)
-		return error;
-	info->version = val;
-
-	error = qt602240_read_reg(client, QT602240_BUILD, &val);
-	if (error)
-		return error;
-	info->build = val;
-
-	error = qt602240_read_reg(client, QT602240_OBJECT_NUM, &val);
-	if (error)
-		return error;
-	info->object_num = val;
-
-	return 0;
-}
-
-static int qt602240_get_object_table(struct qt602240_data *data)
-{
-	int error;
-	int i;
-	u16 reg;
-	u8 reportid = 0;
-	u8 buf[QT602240_OBJECT_SIZE];
-
-	for (i = 0; i < data->info.object_num; i++) {
-		struct qt602240_object *object = data->object_table + i;
-
-		reg = QT602240_OBJECT_START + QT602240_OBJECT_SIZE * i;
-		error = qt602240_read_object_table(data->client, reg, buf);
-		if (error)
-			return error;
-
-		object->type = buf[0];
-		object->start_address = (buf[2] << 8) | buf[1];
-		object->size = buf[3];
-		object->instances = buf[4];
-		object->num_report_ids = buf[5];
-
-		if (object->num_report_ids) {
-			reportid += object->num_report_ids *
-					(object->instances + 1);
-			object->max_reportid = reportid;
-		}
-	}
-
-	return 0;
-}
-
-static int qt602240_initialize(struct qt602240_data *data)
-{
-	struct i2c_client *client = data->client;
-	struct qt602240_info *info = &data->info;
-	int error;
-	u8 val;
-
-	error = qt602240_get_info(data);
-	if (error)
-		return error;
-
-	data->object_table = kcalloc(info->object_num,
-				     sizeof(struct qt602240_object),
-				     GFP_KERNEL);
-	if (!data->object_table) {
-		dev_err(&client->dev, "Failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	/* Get object table information */
-	error = qt602240_get_object_table(data);
-	if (error)
-		return error;
-
-	/* Check register init values */
-	error = qt602240_check_reg_init(data);
-	if (error)
-		return error;
-
-	/* Check X/Y matrix size */
-	error = qt602240_check_matrix_size(data);
-	if (error)
-		return error;
-
-	error = qt602240_make_highchg(data);
-	if (error)
-		return error;
-
-	qt602240_handle_pdata(data);
-
-	/* Backup to memory */
-	qt602240_write_object(data, QT602240_GEN_COMMAND,
-			QT602240_COMMAND_BACKUPNV,
-			QT602240_BACKUP_VALUE);
-	msleep(QT602240_BACKUP_TIME);
-
-	/* Soft reset */
-	qt602240_write_object(data, QT602240_GEN_COMMAND,
-			QT602240_COMMAND_RESET, 1);
-	msleep(QT602240_RESET_TIME);
-
-	/* Update matrix size at info struct */
-	error = qt602240_read_reg(client, QT602240_MATRIX_X_SIZE, &val);
-	if (error)
-		return error;
-	info->matrix_xsize = val;
-
-	error = qt602240_read_reg(client, QT602240_MATRIX_Y_SIZE, &val);
-	if (error)
-		return error;
-	info->matrix_ysize = val;
-
-	dev_info(&client->dev,
-			"Family ID: %d Variant ID: %d Version: %d Build: %d\n",
-			info->family_id, info->variant_id, info->version,
-			info->build);
-
-	dev_info(&client->dev,
-			"Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n",
-			info->matrix_xsize, info->matrix_ysize,
-			info->object_num);
-
-	return 0;
-}
-
-static ssize_t qt602240_object_show(struct device *dev,
-				    struct device_attribute *attr, char *buf)
-{
-	struct qt602240_data *data = dev_get_drvdata(dev);
-	struct qt602240_object *object;
-	int count = 0;
-	int i, j;
-	int error;
-	u8 val;
-
-	for (i = 0; i < data->info.object_num; i++) {
-		object = data->object_table + i;
-
-		count += sprintf(buf + count,
-				"Object Table Element %d(Type %d)\n",
-				i + 1, object->type);
-
-		if (!qt602240_object_readable(object->type)) {
-			count += sprintf(buf + count, "\n");
-			continue;
-		}
-
-		for (j = 0; j < object->size + 1; j++) {
-			error = qt602240_read_object(data,
-						object->type, j, &val);
-			if (error)
-				return error;
-
-			count += sprintf(buf + count,
-					"  Byte %d: 0x%x (%d)\n", j, val, val);
-		}
-
-		count += sprintf(buf + count, "\n");
-	}
-
-	return count;
-}
-
-static int qt602240_load_fw(struct device *dev, const char *fn)
-{
-	struct qt602240_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
-	const struct firmware *fw = NULL;
-	unsigned int frame_size;
-	unsigned int pos = 0;
-	int ret;
-
-	ret = request_firmware(&fw, fn, dev);
-	if (ret) {
-		dev_err(dev, "Unable to open firmware %s\n", fn);
-		return ret;
-	}
-
-	/* Change to the bootloader mode */
-	qt602240_write_object(data, QT602240_GEN_COMMAND,
-			QT602240_COMMAND_RESET, QT602240_BOOT_VALUE);
-	msleep(QT602240_RESET_TIME);
-
-	/* Change to slave address of bootloader */
-	if (client->addr == QT602240_APP_LOW)
-		client->addr = QT602240_BOOT_LOW;
-	else
-		client->addr = QT602240_BOOT_HIGH;
-
-	ret = qt602240_check_bootloader(client, QT602240_WAITING_BOOTLOAD_CMD);
-	if (ret)
-		goto out;
-
-	/* Unlock bootloader */
-	qt602240_unlock_bootloader(client);
-
-	while (pos < fw->size) {
-		ret = qt602240_check_bootloader(client,
-						QT602240_WAITING_FRAME_DATA);
-		if (ret)
-			goto out;
-
-		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
-
-		/* We should add 2 at frame size as the the firmware data is not
-		 * included the CRC bytes.
-		 */
-		frame_size += 2;
-
-		/* Write one frame to device */
-		qt602240_fw_write(client, fw->data + pos, frame_size);
-
-		ret = qt602240_check_bootloader(client,
-						QT602240_FRAME_CRC_PASS);
-		if (ret)
-			goto out;
-
-		pos += frame_size;
-
-		dev_dbg(dev, "Updated %d bytes / %zd bytes\n", pos, fw->size);
-	}
-
-out:
-	release_firmware(fw);
-
-	/* Change to slave address of application */
-	if (client->addr == QT602240_BOOT_LOW)
-		client->addr = QT602240_APP_LOW;
-	else
-		client->addr = QT602240_APP_HIGH;
-
-	return ret;
-}
-
-static ssize_t qt602240_update_fw_store(struct device *dev,
-					struct device_attribute *attr,
-					const char *buf, size_t count)
-{
-	struct qt602240_data *data = dev_get_drvdata(dev);
-	unsigned int version;
-	int error;
-
-	if (sscanf(buf, "%u", &version) != 1) {
-		dev_err(dev, "Invalid values\n");
-		return -EINVAL;
-	}
-
-	if (data->info.version < QT602240_VER_21 || version < QT602240_VER_21) {
-		dev_err(dev, "FW update supported starting with version 21\n");
-		return -EINVAL;
-	}
-
-	disable_irq(data->irq);
-
-	error = qt602240_load_fw(dev, QT602240_FW_NAME);
-	if (error) {
-		dev_err(dev, "The firmware update failed(%d)\n", error);
-		count = error;
-	} else {
-		dev_dbg(dev, "The firmware update succeeded\n");
-
-		/* Wait for reset */
-		msleep(QT602240_FWRESET_TIME);
-
-		kfree(data->object_table);
-		data->object_table = NULL;
-
-		qt602240_initialize(data);
-	}
-
-	enable_irq(data->irq);
-
-	return count;
-}
-
-static DEVICE_ATTR(object, 0444, qt602240_object_show, NULL);
-static DEVICE_ATTR(update_fw, 0664, NULL, qt602240_update_fw_store);
-
-static struct attribute *qt602240_attrs[] = {
-	&dev_attr_object.attr,
-	&dev_attr_update_fw.attr,
-	NULL
-};
-
-static const struct attribute_group qt602240_attr_group = {
-	.attrs = qt602240_attrs,
-};
-
-static void qt602240_start(struct qt602240_data *data)
-{
-	/* Touch enable */
-	qt602240_write_object(data,
-			QT602240_TOUCH_MULTI, QT602240_TOUCH_CTRL, 0x83);
-}
-
-static void qt602240_stop(struct qt602240_data *data)
-{
-	/* Touch disable */
-	qt602240_write_object(data,
-			QT602240_TOUCH_MULTI, QT602240_TOUCH_CTRL, 0);
-}
-
-static int qt602240_input_open(struct input_dev *dev)
-{
-	struct qt602240_data *data = input_get_drvdata(dev);
-
-	qt602240_start(data);
-
-	return 0;
-}
-
-static void qt602240_input_close(struct input_dev *dev)
-{
-	struct qt602240_data *data = input_get_drvdata(dev);
-
-	qt602240_stop(data);
-}
-
-static int __devinit qt602240_probe(struct i2c_client *client,
-		const struct i2c_device_id *id)
-{
-	struct qt602240_data *data;
-	struct input_dev *input_dev;
-	int error;
-
-	if (!client->dev.platform_data)
-		return -EINVAL;
-
-	data = kzalloc(sizeof(struct qt602240_data), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!data || !input_dev) {
-		dev_err(&client->dev, "Failed to allocate memory\n");
-		error = -ENOMEM;
-		goto err_free_mem;
-	}
-
-	input_dev->name = "AT42QT602240/ATMXT224 Touchscreen";
-	input_dev->id.bustype = BUS_I2C;
-	input_dev->dev.parent = &client->dev;
-	input_dev->open = qt602240_input_open;
-	input_dev->close = qt602240_input_close;
-
-	__set_bit(EV_ABS, input_dev->evbit);
-	__set_bit(EV_KEY, input_dev->evbit);
-	__set_bit(BTN_TOUCH, input_dev->keybit);
-
-	/* For single touch */
-	input_set_abs_params(input_dev, ABS_X,
-			     0, QT602240_MAX_XC, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y,
-			     0, QT602240_MAX_YC, 0, 0);
-
-	/* For multi touch */
-	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
-			     0, QT602240_MAX_AREA, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
-			     0, QT602240_MAX_XC, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
-			     0, QT602240_MAX_YC, 0, 0);
-
-	input_set_drvdata(input_dev, data);
-
-	data->client = client;
-	data->input_dev = input_dev;
-	data->pdata = client->dev.platform_data;
-	data->irq = client->irq;
-
-	i2c_set_clientdata(client, data);
-
-	error = qt602240_initialize(data);
-	if (error)
-		goto err_free_object;
-
-	error = request_threaded_irq(client->irq, NULL, qt602240_interrupt,
-			IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
-	if (error) {
-		dev_err(&client->dev, "Failed to register interrupt\n");
-		goto err_free_object;
-	}
-
-	error = input_register_device(input_dev);
-	if (error)
-		goto err_free_irq;
-
-	error = sysfs_create_group(&client->dev.kobj, &qt602240_attr_group);
-	if (error)
-		goto err_unregister_device;
-
-	return 0;
-
-err_unregister_device:
-	input_unregister_device(input_dev);
-	input_dev = NULL;
-err_free_irq:
-	free_irq(client->irq, data);
-err_free_object:
-	kfree(data->object_table);
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(data);
-	return error;
-}
-
-static int __devexit qt602240_remove(struct i2c_client *client)
-{
-	struct qt602240_data *data = i2c_get_clientdata(client);
-
-	sysfs_remove_group(&client->dev.kobj, &qt602240_attr_group);
-	free_irq(data->irq, data);
-	input_unregister_device(data->input_dev);
-	kfree(data->object_table);
-	kfree(data);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int qt602240_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct qt602240_data *data = i2c_get_clientdata(client);
-	struct input_dev *input_dev = data->input_dev;
-
-	mutex_lock(&input_dev->mutex);
-
-	if (input_dev->users)
-		qt602240_stop(data);
-
-	mutex_unlock(&input_dev->mutex);
-
-	return 0;
-}
-
-static int qt602240_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct qt602240_data *data = i2c_get_clientdata(client);
-	struct input_dev *input_dev = data->input_dev;
-
-	/* Soft reset */
-	qt602240_write_object(data, QT602240_GEN_COMMAND,
-			QT602240_COMMAND_RESET, 1);
-
-	msleep(QT602240_RESET_TIME);
-
-	mutex_lock(&input_dev->mutex);
-
-	if (input_dev->users)
-		qt602240_start(data);
-
-	mutex_unlock(&input_dev->mutex);
-
-	return 0;
-}
-
-static const struct dev_pm_ops qt602240_pm_ops = {
-	.suspend	= qt602240_suspend,
-	.resume		= qt602240_resume,
-};
-#endif
-
-static const struct i2c_device_id qt602240_id[] = {
-	{ "qt602240_ts", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, qt602240_id);
-
-static struct i2c_driver qt602240_driver = {
-	.driver = {
-		.name	= "qt602240_ts",
-		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
-		.pm	= &qt602240_pm_ops,
-#endif
-	},
-	.probe		= qt602240_probe,
-	.remove		= __devexit_p(qt602240_remove),
-	.id_table	= qt602240_id,
-};
-
-static int __init qt602240_init(void)
-{
-	return i2c_add_driver(&qt602240_driver);
-}
-
-static void __exit qt602240_exit(void)
-{
-	i2c_del_driver(&qt602240_driver);
-}
-
-module_init(qt602240_init);
-module_exit(qt602240_exit);
-
-/* Module information */
-MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
-MODULE_DESCRIPTION("AT42QT602240/ATMXT224 Touchscreen driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
new file mode 100644
index 000000000000..87420616efa4
--- /dev/null
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -0,0 +1,756 @@
+/*
+ * TSC2005 touchscreen driver
+ *
+ * Copyright (C) 2006-2010 Nokia Corporation
+ *
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tsc2005.h>
+
+/*
+ * The touchscreen interface operates as follows:
+ *
+ * 1) Pen is pressed against the touchscreen.
+ * 2) TSC2005 performs AD conversion.
+ * 3) After the conversion is done TSC2005 drives DAV line down.
+ * 4) GPIO IRQ is received and tsc2005_irq_thread() is scheduled.
+ * 5) tsc2005_irq_thread() queues up an spi transfer to fetch the x, y, z1, z2
+ *    values.
+ * 6) tsc2005_irq_thread() reports coordinates to input layer and sets up
+ *    tsc2005_penup_timer() to be called after TSC2005_PENUP_TIME_MS (40ms).
+ * 7) When the penup timer expires, there have not been touch or DAV interrupts
+ *    during the last 40ms which means the pen has been lifted.
+ *
+ * ESD recovery via a hardware reset is done if the TSC2005 doesn't respond
+ * after a configurable period (in ms) of activity. If esd_timeout is 0, the
+ * watchdog is disabled.
+ */
+
+/* control byte 1 */
+#define TSC2005_CMD			0x80
+#define TSC2005_CMD_NORMAL		0x00
+#define TSC2005_CMD_STOP		0x01
+#define TSC2005_CMD_12BIT		0x04
+
+/* control byte 0 */
+#define TSC2005_REG_READ		0x0001
+#define TSC2005_REG_PND0		0x0002
+#define TSC2005_REG_X			0x0000
+#define TSC2005_REG_Y			0x0008
+#define TSC2005_REG_Z1			0x0010
+#define TSC2005_REG_Z2			0x0018
+#define TSC2005_REG_TEMP_HIGH		0x0050
+#define TSC2005_REG_CFR0		0x0060
+#define TSC2005_REG_CFR1		0x0068
+#define TSC2005_REG_CFR2		0x0070
+
+/* configuration register 0 */
+#define TSC2005_CFR0_PRECHARGE_276US	0x0040
+#define TSC2005_CFR0_STABTIME_1MS	0x0300
+#define TSC2005_CFR0_CLOCK_1MHZ		0x1000
+#define TSC2005_CFR0_RESOLUTION12	0x2000
+#define TSC2005_CFR0_PENMODE		0x8000
+#define TSC2005_CFR0_INITVALUE		(TSC2005_CFR0_STABTIME_1MS    | \
+					 TSC2005_CFR0_CLOCK_1MHZ      | \
+					 TSC2005_CFR0_RESOLUTION12    | \
+					 TSC2005_CFR0_PRECHARGE_276US | \
+					 TSC2005_CFR0_PENMODE)
+
+/* bits common to both read and write of configuration register 0 */
+#define	TSC2005_CFR0_RW_MASK		0x3fff
+
+/* configuration register 1 */
+#define TSC2005_CFR1_BATCHDELAY_4MS	0x0003
+#define TSC2005_CFR1_INITVALUE		TSC2005_CFR1_BATCHDELAY_4MS
+
+/* configuration register 2 */
+#define TSC2005_CFR2_MAVE_Z		0x0004
+#define TSC2005_CFR2_MAVE_Y		0x0008
+#define TSC2005_CFR2_MAVE_X		0x0010
+#define TSC2005_CFR2_AVG_7		0x0800
+#define TSC2005_CFR2_MEDIUM_15		0x3000
+#define TSC2005_CFR2_INITVALUE		(TSC2005_CFR2_MAVE_X	| \
+					 TSC2005_CFR2_MAVE_Y	| \
+					 TSC2005_CFR2_MAVE_Z	| \
+					 TSC2005_CFR2_MEDIUM_15	| \
+					 TSC2005_CFR2_AVG_7)
+
+#define MAX_12BIT			0xfff
+#define TSC2005_SPI_MAX_SPEED_HZ	10000000
+#define TSC2005_PENUP_TIME_MS		40
+
+struct tsc2005_spi_rd {
+	struct spi_transfer	spi_xfer;
+	u32			spi_tx;
+	u32			spi_rx;
+};
+
+struct tsc2005 {
+	struct spi_device	*spi;
+
+	struct spi_message      spi_read_msg;
+	struct tsc2005_spi_rd	spi_x;
+	struct tsc2005_spi_rd	spi_y;
+	struct tsc2005_spi_rd	spi_z1;
+	struct tsc2005_spi_rd	spi_z2;
+
+	struct input_dev	*idev;
+	char			phys[32];
+
+	struct mutex		mutex;
+
+	/* raw copy of previous x,y,z */
+	int			in_x;
+	int			in_y;
+	int                     in_z1;
+	int			in_z2;
+
+	spinlock_t		lock;
+	struct timer_list	penup_timer;
+
+	unsigned int		esd_timeout;
+	struct delayed_work	esd_work;
+	unsigned long		last_valid_interrupt;
+
+	unsigned int		x_plate_ohm;
+
+	bool			opened;
+	bool			suspended;
+
+	bool			pen_down;
+
+	void			(*set_reset)(bool enable);
+};
+
+static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd)
+{
+	u8 tx = TSC2005_CMD | TSC2005_CMD_12BIT | cmd;
+	struct spi_transfer xfer = {
+		.tx_buf		= &tx,
+		.len		= 1,
+		.bits_per_word	= 8,
+	};
+	struct spi_message msg;
+	int error;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	error = spi_sync(ts->spi, &msg);
+	if (error) {
+		dev_err(&ts->spi->dev, "%s: failed, command: %x, error: %d\n",
+			__func__, cmd, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value)
+{
+	u32 tx = ((reg | TSC2005_REG_PND0) << 16) | value;
+	struct spi_transfer xfer = {
+		.tx_buf		= &tx,
+		.len		= 4,
+		.bits_per_word	= 24,
+	};
+	struct spi_message msg;
+	int error;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	error = spi_sync(ts->spi, &msg);
+	if (error) {
+		dev_err(&ts->spi->dev,
+			"%s: failed, register: %x, value: %x, error: %d\n",
+			__func__, reg, value, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last)
+{
+	memset(rd, 0, sizeof(*rd));
+
+	rd->spi_tx		   = (reg | TSC2005_REG_READ) << 16;
+	rd->spi_xfer.tx_buf	   = &rd->spi_tx;
+	rd->spi_xfer.rx_buf	   = &rd->spi_rx;
+	rd->spi_xfer.len	   = 4;
+	rd->spi_xfer.bits_per_word = 24;
+	rd->spi_xfer.cs_change	   = !last;
+}
+
+static int tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value)
+{
+	struct tsc2005_spi_rd spi_rd;
+	struct spi_message msg;
+	int error;
+
+	tsc2005_setup_read(&spi_rd, reg, true);
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&spi_rd.spi_xfer, &msg);
+
+	error = spi_sync(ts->spi, &msg);
+	if (error)
+		return error;
+
+	*value = spi_rd.spi_rx;
+	return 0;
+}
+
+static void tsc2005_update_pen_state(struct tsc2005 *ts,
+				     int x, int y, int pressure)
+{
+	if (pressure) {
+		input_report_abs(ts->idev, ABS_X, x);
+		input_report_abs(ts->idev, ABS_Y, y);
+		input_report_abs(ts->idev, ABS_PRESSURE, pressure);
+		if (!ts->pen_down) {
+			input_report_key(ts->idev, BTN_TOUCH, !!pressure);
+			ts->pen_down = true;
+		}
+	} else {
+		input_report_abs(ts->idev, ABS_PRESSURE, 0);
+		if (ts->pen_down) {
+			input_report_key(ts->idev, BTN_TOUCH, 0);
+			ts->pen_down = false;
+		}
+	}
+	input_sync(ts->idev);
+	dev_dbg(&ts->spi->dev, "point(%4d,%4d), pressure (%4d)\n", x, y,
+		pressure);
+}
+
+static irqreturn_t tsc2005_irq_thread(int irq, void *_ts)
+{
+	struct tsc2005 *ts = _ts;
+	unsigned long flags;
+	unsigned int pressure;
+	u32 x, y;
+	u32 z1, z2;
+	int error;
+
+	/* read the coordinates */
+	error = spi_sync(ts->spi, &ts->spi_read_msg);
+	if (unlikely(error))
+		goto out;
+
+	x = ts->spi_x.spi_rx;
+	y = ts->spi_y.spi_rx;
+	z1 = ts->spi_z1.spi_rx;
+	z2 = ts->spi_z2.spi_rx;
+
+	/* validate position */
+	if (unlikely(x > MAX_12BIT || y > MAX_12BIT))
+		goto out;
+
+	/* Skip reading if the pressure components are out of range */
+	if (unlikely(z1 == 0 || z2 > MAX_12BIT || z1 >= z2))
+		goto out;
+
+       /*
+	* Skip point if this is a pen down with the exact same values as
+	* the value before pen-up - that implies SPI fed us stale data
+	*/
+	if (!ts->pen_down &&
+	    ts->in_x == x && ts->in_y == y &&
+	    ts->in_z1 == z1 && ts->in_z2 == z2) {
+		goto out;
+	}
+
+	/*
+	 * At this point we are happy we have a valid and useful reading.
+	 * Remember it for later comparisons. We may now begin downsampling.
+	 */
+	ts->in_x = x;
+	ts->in_y = y;
+	ts->in_z1 = z1;
+	ts->in_z2 = z2;
+
+	/* Compute touch pressure resistance using equation #1 */
+	pressure = x * (z2 - z1) / z1;
+	pressure = pressure * ts->x_plate_ohm / 4096;
+	if (unlikely(pressure > MAX_12BIT))
+		goto out;
+
+	spin_lock_irqsave(&ts->lock, flags);
+
+	tsc2005_update_pen_state(ts, x, y, pressure);
+	mod_timer(&ts->penup_timer,
+		  jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS));
+
+	spin_unlock_irqrestore(&ts->lock, flags);
+
+	ts->last_valid_interrupt = jiffies;
+out:
+	return IRQ_HANDLED;
+}
+
+static void tsc2005_penup_timer(unsigned long data)
+{
+	struct tsc2005 *ts = (struct tsc2005 *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ts->lock, flags);
+	tsc2005_update_pen_state(ts, 0, 0, 0);
+	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static void tsc2005_start_scan(struct tsc2005 *ts)
+{
+	tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE);
+	tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE);
+	tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE);
+	tsc2005_cmd(ts, TSC2005_CMD_NORMAL);
+}
+
+static void tsc2005_stop_scan(struct tsc2005 *ts)
+{
+	tsc2005_cmd(ts, TSC2005_CMD_STOP);
+}
+
+/* must be called with ts->mutex held */
+static void __tsc2005_disable(struct tsc2005 *ts)
+{
+	tsc2005_stop_scan(ts);
+
+	disable_irq(ts->spi->irq);
+	del_timer_sync(&ts->penup_timer);
+
+	cancel_delayed_work_sync(&ts->esd_work);
+
+	enable_irq(ts->spi->irq);
+}
+
+/* must be called with ts->mutex held */
+static void __tsc2005_enable(struct tsc2005 *ts)
+{
+	tsc2005_start_scan(ts);
+
+	if (ts->esd_timeout && ts->set_reset) {
+		ts->last_valid_interrupt = jiffies;
+		schedule_delayed_work(&ts->esd_work,
+				round_jiffies(jiffies +
+					msecs_to_jiffies(ts->esd_timeout)));
+	}
+
+}
+
+static ssize_t tsc2005_selftest_show(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct tsc2005 *ts = spi_get_drvdata(spi);
+	u16 temp_high;
+	u16 temp_high_orig;
+	u16 temp_high_test;
+	bool success = true;
+	int error;
+
+	mutex_lock(&ts->mutex);
+
+	/*
+	 * Test TSC2005 communications via temp high register.
+	 */
+	__tsc2005_disable(ts);
+
+	error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig);
+	if (error) {
+		dev_warn(dev, "selftest failed: read error %d\n", error);
+		success = false;
+		goto out;
+	}
+
+	temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
+
+	error = tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test);
+	if (error) {
+		dev_warn(dev, "selftest failed: write error %d\n", error);
+		success = false;
+		goto out;
+	}
+
+	error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
+	if (error) {
+		dev_warn(dev, "selftest failed: read error %d after write\n",
+			 error);
+		success = false;
+		goto out;
+	}
+
+	if (temp_high != temp_high_test) {
+		dev_warn(dev, "selftest failed: %d != %d\n",
+			 temp_high, temp_high_test);
+		success = false;
+	}
+
+	/* hardware reset */
+	ts->set_reset(false);
+	usleep_range(100, 500); /* only 10us required */
+	ts->set_reset(true);
+
+	if (!success)
+		goto out;
+
+	/* test that the reset really happened */
+	error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
+	if (error) {
+		dev_warn(dev, "selftest failed: read error %d after reset\n",
+			 error);
+		success = false;
+		goto out;
+	}
+
+	if (temp_high != temp_high_orig) {
+		dev_warn(dev, "selftest failed after reset: %d != %d\n",
+			 temp_high, temp_high_orig);
+		success = false;
+	}
+
+out:
+	__tsc2005_enable(ts);
+	mutex_unlock(&ts->mutex);
+
+	return sprintf(buf, "%d\n", success);
+}
+
+static DEVICE_ATTR(selftest, S_IRUGO, tsc2005_selftest_show, NULL);
+
+static struct attribute *tsc2005_attrs[] = {
+	&dev_attr_selftest.attr,
+	NULL
+};
+
+static mode_t tsc2005_attr_is_visible(struct kobject *kobj,
+				      struct attribute *attr, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct spi_device *spi = to_spi_device(dev);
+	struct tsc2005 *ts = spi_get_drvdata(spi);
+	mode_t mode = attr->mode;
+
+	if (attr == &dev_attr_selftest.attr) {
+		if (!ts->set_reset)
+			mode = 0;
+	}
+
+	return mode;
+}
+
+static const struct attribute_group tsc2005_attr_group = {
+	.is_visible	= tsc2005_attr_is_visible,
+	.attrs		= tsc2005_attrs,
+};
+
+static void tsc2005_esd_work(struct work_struct *work)
+{
+	struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work);
+	int error;
+	u16 r;
+
+	mutex_lock(&ts->mutex);
+
+	if (time_is_after_jiffies(ts->last_valid_interrupt +
+				  msecs_to_jiffies(ts->esd_timeout)))
+		goto out;
+
+	/* We should be able to read register without disabling interrupts. */
+	error = tsc2005_read(ts, TSC2005_REG_CFR0, &r);
+	if (!error &&
+	    !((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) {
+		goto out;
+	}
+
+	/*
+	 * If we could not read our known value from configuration register 0
+	 * then we should reset the controller as if from power-up and start
+	 * scanning again.
+	 */
+	dev_info(&ts->spi->dev, "TSC2005 not responding - resetting\n");
+
+	disable_irq(ts->spi->irq);
+	del_timer_sync(&ts->penup_timer);
+
+	tsc2005_update_pen_state(ts, 0, 0, 0);
+
+	ts->set_reset(false);
+	usleep_range(100, 500); /* only 10us required */
+	ts->set_reset(true);
+
+	enable_irq(ts->spi->irq);
+	tsc2005_start_scan(ts);
+
+out:
+	/* re-arm the watchdog */
+	schedule_delayed_work(&ts->esd_work,
+			      round_jiffies(jiffies +
+					msecs_to_jiffies(ts->esd_timeout)));
+	mutex_unlock(&ts->mutex);
+}
+
+static int tsc2005_open(struct input_dev *input)
+{
+	struct tsc2005 *ts = input_get_drvdata(input);
+
+	mutex_lock(&ts->mutex);
+
+	if (!ts->suspended)
+		__tsc2005_enable(ts);
+
+	ts->opened = true;
+
+	mutex_unlock(&ts->mutex);
+
+	return 0;
+}
+
+static void tsc2005_close(struct input_dev *input)
+{
+	struct tsc2005 *ts = input_get_drvdata(input);
+
+	mutex_lock(&ts->mutex);
+
+	if (!ts->suspended)
+		__tsc2005_disable(ts);
+
+	ts->opened = false;
+
+	mutex_unlock(&ts->mutex);
+}
+
+static void __devinit tsc2005_setup_spi_xfer(struct tsc2005 *ts)
+{
+	tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, false);
+	tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, false);
+	tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, false);
+	tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, true);
+
+	spi_message_init(&ts->spi_read_msg);
+	spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg);
+	spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg);
+	spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg);
+	spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg);
+}
+
+static int __devinit tsc2005_probe(struct spi_device *spi)
+{
+	const struct tsc2005_platform_data *pdata = spi->dev.platform_data;
+	struct tsc2005 *ts;
+	struct input_dev *input_dev;
+	unsigned int max_x, max_y, max_p;
+	unsigned int fudge_x, fudge_y, fudge_p;
+	int error;
+
+	if (!pdata) {
+		dev_dbg(&spi->dev, "no platform data\n");
+		return -ENODEV;
+	}
+
+	fudge_x	= pdata->ts_x_fudge	   ? : 4;
+	fudge_y	= pdata->ts_y_fudge	   ? : 8;
+	fudge_p	= pdata->ts_pressure_fudge ? : 2;
+	max_x	= pdata->ts_x_max	   ? : MAX_12BIT;
+	max_y	= pdata->ts_y_max	   ? : MAX_12BIT;
+	max_p	= pdata->ts_pressure_max   ? : MAX_12BIT;
+
+	if (spi->irq <= 0) {
+		dev_dbg(&spi->dev, "no irq\n");
+		return -ENODEV;
+	}
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 8;
+	if (!spi->max_speed_hz)
+		spi->max_speed_hz = TSC2005_SPI_MAX_SPEED_HZ;
+
+	error = spi_setup(spi);
+	if (error)
+		return error;
+
+	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->spi = spi;
+	ts->idev = input_dev;
+
+	ts->x_plate_ohm	= pdata->ts_x_plate_ohm	? : 280;
+	ts->esd_timeout	= pdata->esd_timeout_ms;
+	ts->set_reset	= pdata->set_reset;
+
+	mutex_init(&ts->mutex);
+
+	spin_lock_init(&ts->lock);
+	setup_timer(&ts->penup_timer, tsc2005_penup_timer, (unsigned long)ts);
+
+	INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work);
+
+	tsc2005_setup_spi_xfer(ts);
+
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input-ts", dev_name(&spi->dev));
+
+	input_dev->name = "TSC2005 touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = BUS_SPI;
+	input_dev->dev.parent = &spi->dev;
+	input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, max_x, fudge_x, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
+
+	input_dev->open = tsc2005_open;
+	input_dev->close = tsc2005_close;
+
+	input_set_drvdata(input_dev, ts);
+
+	/* Ensure the touchscreen is off */
+	tsc2005_stop_scan(ts);
+
+	error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread,
+				     IRQF_TRIGGER_RISING, "tsc2005", ts);
+	if (error) {
+		dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
+		goto err_free_mem;
+	}
+
+	spi_set_drvdata(spi, ts);
+	error = sysfs_create_group(&spi->dev.kobj, &tsc2005_attr_group);
+	if (error) {
+		dev_err(&spi->dev,
+			"Failed to create sysfs attributes, err: %d\n", error);
+		goto err_clear_drvdata;
+	}
+
+	error = input_register_device(ts->idev);
+	if (error) {
+		dev_err(&spi->dev,
+			"Failed to register input device, err: %d\n", error);
+		goto err_remove_sysfs;
+	}
+
+	set_irq_wake(spi->irq, 1);
+	return 0;
+
+err_remove_sysfs:
+	sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
+err_clear_drvdata:
+	spi_set_drvdata(spi, NULL);
+	free_irq(spi->irq, ts);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+	return error;
+}
+
+static int __devexit tsc2005_remove(struct spi_device *spi)
+{
+	struct tsc2005 *ts = spi_get_drvdata(spi);
+
+	sysfs_remove_group(&ts->spi->dev.kobj, &tsc2005_attr_group);
+
+	free_irq(ts->spi->irq, ts);
+	input_unregister_device(ts->idev);
+	kfree(ts);
+
+	spi_set_drvdata(spi, NULL);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tsc2005_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct tsc2005 *ts = spi_get_drvdata(spi);
+
+	mutex_lock(&ts->mutex);
+
+	if (!ts->suspended && ts->opened)
+		__tsc2005_disable(ts);
+
+	ts->suspended = true;
+
+	mutex_unlock(&ts->mutex);
+
+	return 0;
+}
+
+static int tsc2005_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct tsc2005 *ts = spi_get_drvdata(spi);
+
+	mutex_lock(&ts->mutex);
+
+	if (ts->suspended && ts->opened)
+		__tsc2005_enable(ts);
+
+	ts->suspended = false;
+
+	mutex_unlock(&ts->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tsc2005_pm_ops, tsc2005_suspend, tsc2005_resume);
+
+static struct spi_driver tsc2005_driver = {
+	.driver	= {
+		.name	= "tsc2005",
+		.owner	= THIS_MODULE,
+		.pm	= &tsc2005_pm_ops,
+	},
+	.probe	= tsc2005_probe,
+	.remove	= __devexit_p(tsc2005_remove),
+};
+
+static int __init tsc2005_init(void)
+{
+	return spi_register_driver(&tsc2005_driver);
+}
+module_init(tsc2005_init);
+
+static void __exit tsc2005_exit(void)
+{
+	spi_unregister_driver(&tsc2005_driver);
+}
+module_exit(tsc2005_exit);
+
+MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
+MODULE_DESCRIPTION("TSC2005 Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
new file mode 100644
index 000000000000..6ae054f8e0aa
--- /dev/null
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -0,0 +1,368 @@
+/*
+ * Touchscreen driver for WM831x PMICs
+ *
+ * Copyright 2011 Wolfson Microelectronics plc.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/pm.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/*
+ * R16424 (0x4028) - Touch Control 1
+ */
+#define WM831X_TCH_ENA                          0x8000  /* TCH_ENA */
+#define WM831X_TCH_CVT_ENA                      0x4000  /* TCH_CVT_ENA */
+#define WM831X_TCH_SLPENA                       0x1000  /* TCH_SLPENA */
+#define WM831X_TCH_Z_ENA                        0x0400  /* TCH_Z_ENA */
+#define WM831X_TCH_Y_ENA                        0x0200  /* TCH_Y_ENA */
+#define WM831X_TCH_X_ENA                        0x0100  /* TCH_X_ENA */
+#define WM831X_TCH_DELAY_MASK                   0x00E0  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_DELAY_SHIFT                       5  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_DELAY_WIDTH                       3  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_RATE_MASK                    0x001F  /* TCH_RATE - [4:0] */
+#define WM831X_TCH_RATE_SHIFT                        0  /* TCH_RATE - [4:0] */
+#define WM831X_TCH_RATE_WIDTH                        5  /* TCH_RATE - [4:0] */
+
+/*
+ * R16425 (0x4029) - Touch Control 2
+ */
+#define WM831X_TCH_PD_WK                        0x2000  /* TCH_PD_WK */
+#define WM831X_TCH_5WIRE                        0x1000  /* TCH_5WIRE */
+#define WM831X_TCH_PDONLY                       0x0800  /* TCH_PDONLY */
+#define WM831X_TCH_ISEL                         0x0100  /* TCH_ISEL */
+#define WM831X_TCH_RPU_MASK                     0x000F  /* TCH_RPU - [3:0] */
+#define WM831X_TCH_RPU_SHIFT                         0  /* TCH_RPU - [3:0] */
+#define WM831X_TCH_RPU_WIDTH                         4  /* TCH_RPU - [3:0] */
+
+/*
+ * R16426-8 (0x402A-C) - Touch Data X/Y/X
+ */
+#define WM831X_TCH_PD                           0x8000  /* TCH_PD1 */
+#define WM831X_TCH_DATA_MASK                    0x0FFF  /* TCH_DATA - [11:0] */
+#define WM831X_TCH_DATA_SHIFT                        0  /* TCH_DATA - [11:0] */
+#define WM831X_TCH_DATA_WIDTH                       12  /* TCH_DATA - [11:0] */
+
+struct wm831x_ts {
+	struct input_dev *input_dev;
+	struct wm831x *wm831x;
+	unsigned int data_irq;
+	unsigned int pd_irq;
+	bool pressure;
+	bool pen_down;
+};
+
+static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
+{
+	struct wm831x_ts *wm831x_ts = irq_data;
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+	static int data_types[] = { ABS_X, ABS_Y, ABS_PRESSURE };
+	u16 data[3];
+	int count;
+	int i, ret;
+
+	if (wm831x_ts->pressure)
+		count = 3;
+	else
+		count = 2;
+
+	wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+			WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT);
+
+	ret = wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count,
+			       data);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to read touch data: %d\n",
+			ret);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * We get a pen down reading on every reading, report pen up if any
+	 * individual reading does so.
+	 */
+	wm831x_ts->pen_down = true;
+	for (i = 0; i < count; i++) {
+		if (!(data[i] & WM831X_TCH_PD)) {
+			wm831x_ts->pen_down = false;
+			continue;
+		}
+		input_report_abs(wm831x_ts->input_dev, data_types[i],
+				 data[i] & WM831X_TCH_DATA_MASK);
+	}
+
+	if (!wm831x_ts->pen_down) {
+		disable_irq_nosync(wm831x_ts->data_irq);
+
+		/* Don't need data any more */
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+				WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
+				WM831X_TCH_Z_ENA, 0);
+
+		/* Flush any final samples that arrived while reading */
+		wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+				WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT);
+
+		wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count, data);
+
+		if (wm831x_ts->pressure)
+			input_report_abs(wm831x_ts->input_dev,
+					 ABS_PRESSURE, 0);
+
+		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0);
+	}
+
+	input_sync(wm831x_ts->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data)
+{
+	struct wm831x_ts *wm831x_ts = irq_data;
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+	int ena = 0;
+
+	/* Start collecting data */
+	if (wm831x_ts->pressure)
+		ena |= WM831X_TCH_Z_ENA;
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA,
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | ena);
+
+	input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
+	input_sync(wm831x_ts->input_dev);
+
+	wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+			WM831X_TCHPD_EINT, WM831X_TCHPD_EINT);
+
+	wm831x_ts->pen_down = true;
+	enable_irq(wm831x_ts->data_irq);
+
+	return IRQ_HANDLED;
+}
+
+static int wm831x_ts_input_open(struct input_dev *idev)
+{
+	struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_ENA | WM831X_TCH_CVT_ENA |
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
+			WM831X_TCH_Z_ENA, WM831X_TCH_ENA);
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_CVT_ENA, WM831X_TCH_CVT_ENA);
+
+	return 0;
+}
+
+static void wm831x_ts_input_close(struct input_dev *idev)
+{
+	struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_ENA | WM831X_TCH_CVT_ENA |
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
+			WM831X_TCH_Z_ENA, 0);
+
+	if (wm831x_ts->pen_down)
+		disable_irq(wm831x_ts->data_irq);
+}
+
+static __devinit int wm831x_ts_probe(struct platform_device *pdev)
+{
+	struct wm831x_ts *wm831x_ts;
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *core_pdata = dev_get_platdata(pdev->dev.parent);
+	struct wm831x_touch_pdata *pdata = NULL;
+	struct input_dev *input_dev;
+	int error;
+
+	if (core_pdata)
+		pdata = core_pdata->touch;
+
+	wm831x_ts = kzalloc(sizeof(struct wm831x_ts), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!wm831x_ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_alloc;
+	}
+
+	wm831x_ts->wm831x = wm831x;
+	wm831x_ts->input_dev = input_dev;
+
+	/*
+	 * If we have a direct IRQ use it, otherwise use the interrupt
+	 * from the WM831x IRQ controller.
+	 */
+	if (pdata && pdata->data_irq)
+		wm831x_ts->data_irq = pdata->data_irq;
+	else
+		wm831x_ts->data_irq = platform_get_irq_byname(pdev, "TCHDATA");
+
+	if (pdata && pdata->pd_irq)
+		wm831x_ts->pd_irq = pdata->pd_irq;
+	else
+		wm831x_ts->pd_irq = platform_get_irq_byname(pdev, "TCHPD");
+
+	if (pdata)
+		wm831x_ts->pressure = pdata->pressure;
+	else
+		wm831x_ts->pressure = true;
+
+	/* Five wire touchscreens can't report pressure */
+	if (pdata && pdata->fivewire) {
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+				WM831X_TCH_5WIRE, WM831X_TCH_5WIRE);
+
+		/* Pressure measurements are not possible for five wire mode */
+		WARN_ON(pdata->pressure && pdata->fivewire);
+		wm831x_ts->pressure = false;
+	} else {
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+				WM831X_TCH_5WIRE, 0);
+	}
+
+	if (pdata) {
+		switch (pdata->isel) {
+		default:
+			dev_err(&pdev->dev, "Unsupported ISEL setting: %d\n",
+				pdata->isel);
+			/* Fall through */
+		case 200:
+		case 0:
+			wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+					WM831X_TCH_ISEL, 0);
+			break;
+		case 400:
+			wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+					WM831X_TCH_ISEL, WM831X_TCH_ISEL);
+			break;
+		}
+	}
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+			WM831X_TCH_PDONLY, 0);
+
+	/* Default to 96 samples/sec */
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_RATE_MASK, 6);
+
+	error = request_threaded_irq(wm831x_ts->data_irq,
+				     NULL, wm831x_ts_data_irq,
+				     IRQF_ONESHOT,
+				     "Touchscreen data", wm831x_ts);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n",
+			wm831x_ts->data_irq, error);
+		goto err_alloc;
+	}
+	disable_irq(wm831x_ts->data_irq);
+
+	error = request_threaded_irq(wm831x_ts->pd_irq,
+				     NULL, wm831x_ts_pen_down_irq,
+				     IRQF_ONESHOT,
+				     "Touchscreen pen down", wm831x_ts);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request pen down IRQ %d: %d\n",
+			wm831x_ts->pd_irq, error);
+		goto err_data_irq;
+	}
+
+	/* set up touch configuration */
+	input_dev->name = "WM831x touchscreen";
+	input_dev->phys = "wm831x";
+	input_dev->open = wm831x_ts_input_open;
+	input_dev->close = wm831x_ts_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 4095, 5, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 4095, 5, 0);
+	if (wm831x_ts->pressure)
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 4095, 5, 0);
+
+	input_set_drvdata(input_dev, wm831x_ts);
+	input_dev->dev.parent = &pdev->dev;
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_pd_irq;
+
+	platform_set_drvdata(pdev, wm831x_ts);
+	return 0;
+
+err_pd_irq:
+	free_irq(wm831x_ts->pd_irq, wm831x_ts);
+err_data_irq:
+	free_irq(wm831x_ts->data_irq, wm831x_ts);
+err_alloc:
+	input_free_device(input_dev);
+	kfree(wm831x_ts);
+
+	return error;
+}
+
+static __devexit int wm831x_ts_remove(struct platform_device *pdev)
+{
+	struct wm831x_ts *wm831x_ts = platform_get_drvdata(pdev);
+
+	free_irq(wm831x_ts->pd_irq, wm831x_ts);
+	free_irq(wm831x_ts->data_irq, wm831x_ts);
+	input_unregister_device(wm831x_ts->input_dev);
+	kfree(wm831x_ts);
+
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver wm831x_ts_driver = {
+	.driver = {
+		.name = "wm831x-touch",
+		.owner = THIS_MODULE,
+	},
+	.probe = wm831x_ts_probe,
+	.remove = __devexit_p(wm831x_ts_remove),
+};
+
+static int __init wm831x_ts_init(void)
+{
+	return platform_driver_register(&wm831x_ts_driver);
+}
+module_init(wm831x_ts_init);
+
+static void __exit wm831x_ts_exit(void)
+{
+	platform_driver_unregister(&wm831x_ts_driver);
+}
+module_exit(wm831x_ts_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x PMIC touchscreen driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-touch");