[media] lirc_serial: move out of staging and rename to serial_ir

Signed-off-by: Sean Young <sean@mess.org>

3 files changed, 862 insertions, 0 deletions

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 370e16e07867..629e8ca15ab3 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -389,4 +389,21 @@ config IR_SUNXI
 	   To compile this driver as a module, choose M here: the module will
 	   be called sunxi-ir.
 
+config IR_SERIAL
+	tristate "Homebrew Serial Port Receiver"
+	depends on RC_CORE
+	---help---
+	   Say Y if you want to use Homebrew Serial Port Receivers and
+	   Transceivers.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called serial-ir.
+
+config IR_SERIAL_TRANSMITTER
+	bool "Serial Port Transmitter"
+	default y
+	depends on IR_SERIAL
+	---help---
+	   Serial Port Transmitter support
+
 endif #RC_DEVICES
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 379a5c0f1379..3a984ee301e2 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
 obj-$(CONFIG_RC_ST) += st_rc.o
 obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o
 obj-$(CONFIG_IR_IMG) += img-ir/
+obj-$(CONFIG_IR_SERIAL) += serial_ir.o
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
new file mode 100644
index 000000000000..ba83b20913cd
--- /dev/null
+++ b/drivers/media/rc/serial_ir.c
@@ -0,0 +1,844 @@
+/*
+ * serial_ir.c
+ *
+ * serial_ir - Device driver that records pulse- and pause-lengths
+ *	       (space-lengths) between DDCD event on a serial port.
+ *
+ * Copyright (C) 1996,97 Ralph Metzler <rjkm@thp.uni-koeln.de>
+ * Copyright (C) 1998 Trent Piepho <xyzzy@u.washington.edu>
+ * Copyright (C) 1998 Ben Pfaff <blp@gnu.org>
+ * Copyright (C) 1999 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (C) 2007 Andrei Tanas <andrei@tanas.ca> (suspend/resume support)
+ * Copyright (C) 2016 Sean Young <sean@mess.org> (port to rc-core)
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <media/rc-core.h>
+
+struct serial_ir_hw {
+	int signal_pin;
+	int signal_pin_change;
+	u8 on;
+	u8 off;
+	unsigned set_send_carrier:1;
+	unsigned set_duty_cycle:1;
+	void (*send_pulse)(unsigned int length, ktime_t edge);
+	void (*send_space)(void);
+	spinlock_t lock;
+};
+
+#define IR_HOMEBREW	0
+#define IR_IRDEO	1
+#define IR_IRDEO_REMOTE	2
+#define IR_ANIMAX	3
+#define IR_IGOR		4
+
+/* module parameters */
+static int type;
+static int io;
+static int irq;
+static bool iommap;
+static int ioshift;
+static bool softcarrier = true;
+static bool share_irq;
+static int sense = -1;	/* -1 = auto, 0 = active high, 1 = active low */
+static bool txsense;	/* 0 = active high, 1 = active low */
+
+/* forward declarations */
+static void send_pulse_irdeo(unsigned int length, ktime_t edge);
+static void send_space_irdeo(void);
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+static void send_pulse_homebrew(unsigned int length, ktime_t edge);
+static void send_space_homebrew(void);
+#endif
+
+static struct serial_ir_hw hardware[] = {
+	[IR_HOMEBREW] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[IR_HOMEBREW].lock),
+		.signal_pin	   = UART_MSR_DCD,
+		.signal_pin_change = UART_MSR_DDCD,
+		.on  = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+		.off = (UART_MCR_RTS | UART_MCR_OUT2),
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+		.send_pulse = send_pulse_homebrew,
+		.send_space = send_space_homebrew,
+		.set_send_carrier = true,
+		.set_duty_cycle = true,
+#endif
+	},
+
+	[IR_IRDEO] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IRDEO].lock),
+		.signal_pin	   = UART_MSR_DSR,
+		.signal_pin_change = UART_MSR_DDSR,
+		.on  = UART_MCR_OUT2,
+		.off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+		.send_pulse = send_pulse_irdeo,
+		.send_space = send_space_irdeo,
+		.set_duty_cycle = true,
+	},
+
+	[IR_IRDEO_REMOTE] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IRDEO_REMOTE].lock),
+		.signal_pin	   = UART_MSR_DSR,
+		.signal_pin_change = UART_MSR_DDSR,
+		.on  = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+		.off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+		.send_pulse = send_pulse_irdeo,
+		.send_space = send_space_irdeo,
+		.set_duty_cycle = true,
+	},
+
+	[IR_ANIMAX] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[IR_ANIMAX].lock),
+		.signal_pin	   = UART_MSR_DCD,
+		.signal_pin_change = UART_MSR_DDCD,
+		.on  = 0,
+		.off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
+	},
+
+	[IR_IGOR] = {
+		.lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IGOR].lock),
+		.signal_pin	   = UART_MSR_DSR,
+		.signal_pin_change = UART_MSR_DDSR,
+		.on  = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
+		.off = (UART_MCR_RTS | UART_MCR_OUT2),
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+		.send_pulse = send_pulse_homebrew,
+		.send_space = send_space_homebrew,
+		.set_send_carrier = true,
+		.set_duty_cycle = true,
+#endif
+	},
+};
+
+#define RS_ISR_PASS_LIMIT 256
+
+struct serial_ir {
+	ktime_t lastkt;
+	struct rc_dev *rcdev;
+	struct platform_device *pdev;
+
+	unsigned int freq;
+	unsigned int duty_cycle;
+
+	unsigned int pulse_width, space_width;
+};
+
+static struct serial_ir serial_ir;
+
+/* fetch serial input packet (1 byte) from register offset */
+static u8 sinp(int offset)
+{
+	if (iommap)
+		/* the register is memory-mapped */
+		offset <<= ioshift;
+
+	return inb(io + offset);
+}
+
+/* write serial output packet (1 byte) of value to register offset */
+static void soutp(int offset, u8 value)
+{
+	if (iommap)
+		/* the register is memory-mapped */
+		offset <<= ioshift;
+
+	outb(value, io + offset);
+}
+
+static void on(void)
+{
+	if (txsense)
+		soutp(UART_MCR, hardware[type].off);
+	else
+		soutp(UART_MCR, hardware[type].on);
+}
+
+static void off(void)
+{
+	if (txsense)
+		soutp(UART_MCR, hardware[type].on);
+	else
+		soutp(UART_MCR, hardware[type].off);
+}
+
+static void init_timing_params(unsigned int new_duty_cycle,
+			       unsigned int new_freq)
+{
+	serial_ir.duty_cycle = new_duty_cycle;
+	serial_ir.freq = new_freq;
+
+	serial_ir.pulse_width = DIV_ROUND_CLOSEST(
+		new_duty_cycle * NSEC_PER_SEC, new_freq * 100l);
+	serial_ir.space_width = DIV_ROUND_CLOSEST(
+		(100l - new_duty_cycle) * NSEC_PER_SEC, new_freq * 100l);
+}
+
+static void send_pulse_irdeo(unsigned int length, ktime_t target)
+{
+	long rawbits;
+	int i;
+	unsigned char output;
+	unsigned char chunk, shifted;
+
+	/* how many bits have to be sent ? */
+	rawbits = length * 1152 / 10000;
+	if (serial_ir.duty_cycle > 50)
+		chunk = 3;
+	else
+		chunk = 1;
+	for (i = 0, output = 0x7f; rawbits > 0; rawbits -= 3) {
+		shifted = chunk << (i * 3);
+		shifted >>= 1;
+		output &= (~shifted);
+		i++;
+		if (i == 3) {
+			soutp(UART_TX, output);
+			while (!(sinp(UART_LSR) & UART_LSR_THRE))
+				;
+			output = 0x7f;
+			i = 0;
+		}
+	}
+	if (i != 0) {
+		soutp(UART_TX, output);
+		while (!(sinp(UART_LSR) & UART_LSR_TEMT))
+			;
+	}
+}
+
+static void send_space_irdeo(void)
+{
+}
+
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+static void send_pulse_homebrew_softcarrier(unsigned int length, ktime_t edge)
+{
+	ktime_t now, target = ktime_add_us(edge, length);
+	/*
+	 * delta should never exceed 4 seconds and on m68k
+	 * ndelay(s64) does not compile; so use s32 rather than s64.
+	 */
+	s32 delta;
+
+	for (;;) {
+		now = ktime_get();
+		if (ktime_compare(now, target) >= 0)
+			break;
+		on();
+		edge = ktime_add_ns(edge, serial_ir.pulse_width);
+		delta = ktime_to_ns(ktime_sub(edge, now));
+		if (delta > 0)
+			ndelay(delta);
+		now = ktime_get();
+		off();
+		if (ktime_compare(now, target) >= 0)
+			break;
+		edge = ktime_add_ns(edge, serial_ir.space_width);
+		delta = ktime_to_ns(ktime_sub(edge, now));
+		if (delta > 0)
+			ndelay(delta);
+	}
+}
+
+static void send_pulse_homebrew(unsigned int length, ktime_t edge)
+{
+	if (softcarrier)
+		send_pulse_homebrew_softcarrier(length, edge);
+	else
+		on();
+}
+
+static void send_space_homebrew(void)
+{
+	off();
+}
+#endif
+
+static void frbwrite(unsigned int l, bool is_pulse)
+{
+	/* simple noise filter */
+	static unsigned int ptr, pulse, space;
+	DEFINE_IR_RAW_EVENT(ev);
+
+	if (ptr > 0 && is_pulse) {
+		pulse += l;
+		if (pulse > 250000) {
+			ev.duration = space;
+			ev.pulse = false;
+			ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+			ev.duration = pulse;
+			ev.pulse = true;
+			ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+			ptr = 0;
+			pulse = 0;
+		}
+		return;
+	}
+	if (!is_pulse) {
+		if (ptr == 0) {
+			if (l > 20000000) {
+				space = l;
+				ptr++;
+				return;
+			}
+		} else {
+			if (l > 20000000) {
+				space += pulse;
+				if (space > IR_MAX_DURATION)
+					space = IR_MAX_DURATION;
+				space += l;
+				if (space > IR_MAX_DURATION)
+					space = IR_MAX_DURATION;
+				pulse = 0;
+				return;
+			}
+
+			ev.duration = space;
+			ev.pulse = false;
+			ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+			ev.duration = pulse;
+			ev.pulse = true;
+			ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+			ptr = 0;
+			pulse = 0;
+		}
+	}
+
+	ev.duration = l;
+	ev.pulse = is_pulse;
+	ir_raw_event_store_with_filter(serial_ir.rcdev, &ev);
+}
+
+static irqreturn_t serial_ir_irq_handler(int i, void *blah)
+{
+	ktime_t kt;
+	int counter, dcd;
+	u8 status;
+	ktime_t delkt;
+	unsigned int data;
+	static int last_dcd = -1;
+
+	if ((sinp(UART_IIR) & UART_IIR_NO_INT)) {
+		/* not our interrupt */
+		return IRQ_NONE;
+	}
+
+	counter = 0;
+	do {
+		counter++;
+		status = sinp(UART_MSR);
+		if (counter > RS_ISR_PASS_LIMIT) {
+			dev_err(&serial_ir.pdev->dev, "Trapped in interrupt");
+			break;
+		}
+		if ((status & hardware[type].signal_pin_change) &&
+		    sense != -1) {
+			/* get current time */
+			kt = ktime_get();
+
+			/*
+			 * The driver needs to know if your receiver is
+			 * active high or active low, or the space/pulse
+			 * sense could be inverted.
+			 */
+
+			/* calc time since last interrupt in nanoseconds */
+			dcd = (status & hardware[type].signal_pin) ? 1 : 0;
+
+			if (dcd == last_dcd) {
+				dev_err(&serial_ir.pdev->dev,
+					"ignoring spike: %d %d %lldns %lldns\n",
+					dcd, sense, ktime_to_ns(kt),
+					ktime_to_ns(serial_ir.lastkt));
+				continue;
+			}
+
+			delkt = ktime_sub(kt, serial_ir.lastkt);
+			if (ktime_compare(delkt, ktime_set(15, 0)) > 0) {
+				data = IR_MAX_DURATION; /* really long time */
+				if (!(dcd ^ sense)) {
+					/* sanity check */
+					dev_err(&serial_ir.pdev->dev,
+						"dcd unexpected: %d %d %lldns %lldns\n",
+						dcd, sense, ktime_to_ns(kt),
+						ktime_to_ns(serial_ir.lastkt));
+					/*
+					 * detecting pulse while this
+					 * MUST be a space!
+					 */
+					sense = sense ? 0 : 1;
+				}
+			} else {
+				data = ktime_to_ns(delkt);
+			}
+			frbwrite(data, !(dcd ^ sense));
+			serial_ir.lastkt = kt;
+			last_dcd = dcd;
+			ir_raw_event_handle(serial_ir.rcdev);
+		}
+	} while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */
+	return IRQ_HANDLED;
+}
+
+static int hardware_init_port(void)
+{
+	u8 scratch, scratch2, scratch3;
+
+	/*
+	 * This is a simple port existence test, borrowed from the autoconfig
+	 * function in drivers/serial/8250.c
+	 */
+	scratch = sinp(UART_IER);
+	soutp(UART_IER, 0);
+#ifdef __i386__
+	outb(0xff, 0x080);
+#endif
+	scratch2 = sinp(UART_IER) & 0x0f;
+	soutp(UART_IER, 0x0f);
+#ifdef __i386__
+	outb(0x00, 0x080);
+#endif
+	scratch3 = sinp(UART_IER) & 0x0f;
+	soutp(UART_IER, scratch);
+	if (scratch2 != 0 || scratch3 != 0x0f) {
+		/* we fail, there's nothing here */
+		pr_err("port existence test failed, cannot continue\n");
+		return -ENODEV;
+	}
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* First of all, disable all interrupts */
+	soutp(UART_IER, sinp(UART_IER) &
+	      (~(UART_IER_MSI | UART_IER_RLSI | UART_IER_THRI | UART_IER_RDI)));
+
+	/* Clear registers. */
+	sinp(UART_LSR);
+	sinp(UART_RX);
+	sinp(UART_IIR);
+	sinp(UART_MSR);
+
+	/* Set line for power source */
+	off();
+
+	/* Clear registers again to be sure. */
+	sinp(UART_LSR);
+	sinp(UART_RX);
+	sinp(UART_IIR);
+	sinp(UART_MSR);
+
+	switch (type) {
+	case IR_IRDEO:
+	case IR_IRDEO_REMOTE:
+		/* setup port to 7N1 @ 115200 Baud */
+		/* 7N1+start = 9 bits at 115200 ~ 3 bits at 38kHz */
+
+		/* Set DLAB 1. */
+		soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB);
+		/* Set divisor to 1 => 115200 Baud */
+		soutp(UART_DLM, 0);
+		soutp(UART_DLL, 1);
+		/* Set DLAB 0 +  7N1 */
+		soutp(UART_LCR, UART_LCR_WLEN7);
+		/* THR interrupt already disabled at this point */
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int serial_ir_probe(struct platform_device *dev)
+{
+	int i, nlow, nhigh, result;
+
+	result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
+				  share_irq ? IRQF_SHARED : 0,
+				  KBUILD_MODNAME, &hardware);
+	if (result < 0) {
+		if (result == -EBUSY)
+			dev_err(&dev->dev, "IRQ %d busy\n", irq);
+		else if (result == -EINVAL)
+			dev_err(&dev->dev, "Bad irq number or handler\n");
+		return result;
+	}
+
+	/* Reserve io region. */
+	if ((iommap &&
+	     (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift,
+				      KBUILD_MODNAME) == NULL)) ||
+	     (!iommap && (devm_request_region(&dev->dev, io, 8,
+			  KBUILD_MODNAME) == NULL))) {
+		dev_err(&dev->dev, "port %04x already in use\n", io);
+		dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
+		dev_warn(&dev->dev,
+			 "or compile the serial port driver as module and\n");
+		dev_warn(&dev->dev, "make sure this module is loaded first\n");
+		return -EBUSY;
+	}
+
+	result = hardware_init_port();
+	if (result < 0)
+		return result;
+
+	/* Initialize pulse/space widths */
+	init_timing_params(50, 38000);
+
+	/* If pin is high, then this must be an active low receiver. */
+	if (sense == -1) {
+		/* wait 1/2 sec for the power supply */
+		msleep(500);
+
+		/*
+		 * probe 9 times every 0.04s, collect "votes" for
+		 * active high/low
+		 */
+		nlow = 0;
+		nhigh = 0;
+		for (i = 0; i < 9; i++) {
+			if (sinp(UART_MSR) & hardware[type].signal_pin)
+				nlow++;
+			else
+				nhigh++;
+			msleep(40);
+		}
+		sense = nlow >= nhigh ? 1 : 0;
+		dev_info(&dev->dev, "auto-detected active %s receiver\n",
+			 sense ? "low" : "high");
+	} else
+		dev_info(&dev->dev, "Manually using active %s receiver\n",
+			 sense ? "low" : "high");
+
+	dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
+	return 0;
+}
+
+static int serial_ir_open(struct rc_dev *rcdev)
+{
+	unsigned long flags;
+
+	/* initialize timestamp */
+	serial_ir.lastkt = ktime_get();
+
+	spin_lock_irqsave(&hardware[type].lock, flags);
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	soutp(UART_IER, sinp(UART_IER) | UART_IER_MSI);
+
+	spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+	return 0;
+}
+
+static void serial_ir_close(struct rc_dev *rcdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hardware[type].lock, flags);
+
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* First of all, disable all interrupts */
+	soutp(UART_IER, sinp(UART_IER) &
+	      (~(UART_IER_MSI | UART_IER_RLSI | UART_IER_THRI | UART_IER_RDI)));
+	spin_unlock_irqrestore(&hardware[type].lock, flags);
+}
+
+static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
+			unsigned int count)
+{
+	unsigned long flags;
+	ktime_t edge;
+	s64 delta;
+	int i;
+
+	spin_lock_irqsave(&hardware[type].lock, flags);
+	if (type == IR_IRDEO) {
+		/* DTR, RTS down */
+		on();
+	}
+
+	edge = ktime_get();
+	for (i = 0; i < count; i++) {
+		if (i % 2)
+			hardware[type].send_space();
+		else
+			hardware[type].send_pulse(txbuf[i], edge);
+
+		edge = ktime_add_us(edge, txbuf[i]);
+		delta = ktime_us_delta(edge, ktime_get());
+		if (delta > 25) {
+			spin_unlock_irqrestore(&hardware[type].lock, flags);
+			usleep_range(delta - 25, delta + 25);
+			spin_lock_irqsave(&hardware[type].lock, flags);
+		} else if (delta > 0) {
+			udelay(delta);
+		}
+	}
+	off();
+	spin_unlock_irqrestore(&hardware[type].lock, flags);
+	return count;
+}
+
+static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle)
+{
+	init_timing_params(cycle, serial_ir.freq);
+	return 0;
+}
+
+static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier)
+{
+	if (carrier > 500000 || carrier < 20000)
+		return -EINVAL;
+
+	init_timing_params(serial_ir.duty_cycle, carrier);
+	return 0;
+}
+
+static int serial_ir_suspend(struct platform_device *dev,
+			     pm_message_t state)
+{
+	/* Set DLAB 0. */
+	soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB));
+
+	/* Disable all interrupts */
+	soutp(UART_IER, sinp(UART_IER) &
+	      (~(UART_IER_MSI | UART_IER_RLSI | UART_IER_THRI | UART_IER_RDI)));
+
+	/* Clear registers. */
+	sinp(UART_LSR);
+	sinp(UART_RX);
+	sinp(UART_IIR);
+	sinp(UART_MSR);
+
+	return 0;
+}
+
+static int serial_ir_resume(struct platform_device *dev)
+{
+	unsigned long flags;
+	int result;
+
+	result = hardware_init_port();
+	if (result < 0)
+		return result;
+
+	spin_lock_irqsave(&hardware[type].lock, flags);
+	/* Enable Interrupt */
+	serial_ir.lastkt = ktime_get();
+	soutp(UART_IER, sinp(UART_IER) | UART_IER_MSI);
+	off();
+
+	spin_unlock_irqrestore(&hardware[type].lock, flags);
+
+	return 0;
+}
+
+static struct platform_driver serial_ir_driver = {
+	.probe		= serial_ir_probe,
+	.suspend	= serial_ir_suspend,
+	.resume		= serial_ir_resume,
+	.driver		= {
+		.name	= "serial_ir",
+	},
+};
+
+static int __init serial_ir_init(void)
+{
+	int result;
+
+	result = platform_driver_register(&serial_ir_driver);
+	if (result)
+		return result;
+
+	serial_ir.pdev = platform_device_alloc("serial_ir", 0);
+	if (!serial_ir.pdev) {
+		result = -ENOMEM;
+		goto exit_driver_unregister;
+	}
+
+	result = platform_device_add(serial_ir.pdev);
+	if (result)
+		goto exit_device_put;
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(serial_ir.pdev);
+exit_driver_unregister:
+	platform_driver_unregister(&serial_ir_driver);
+	return result;
+}
+
+static void serial_ir_exit(void)
+{
+	platform_device_unregister(serial_ir.pdev);
+	platform_driver_unregister(&serial_ir_driver);
+}
+
+static int __init serial_ir_init_module(void)
+{
+	struct rc_dev *rcdev;
+	int result;
+
+	switch (type) {
+	case IR_HOMEBREW:
+	case IR_IRDEO:
+	case IR_IRDEO_REMOTE:
+	case IR_ANIMAX:
+	case IR_IGOR:
+		/* if nothing specified, use ttyS0/com1 and irq 4 */
+		io = io ? io : 0x3f8;
+		irq = irq ? irq : 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (!softcarrier) {
+		switch (type) {
+		case IR_HOMEBREW:
+		case IR_IGOR:
+			hardware[type].set_send_carrier = false;
+			hardware[type].set_duty_cycle = false;
+			break;
+		}
+	}
+
+	/* make sure sense is either -1, 0, or 1 */
+	if (sense != -1)
+		sense = !!sense;
+
+	result = serial_ir_init();
+	if (result)
+		return result;
+
+	rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev);
+	if (!rcdev) {
+		result = -ENOMEM;
+		goto serial_cleanup;
+	}
+
+	if (hardware[type].send_pulse && hardware[type].send_space)
+		rcdev->tx_ir = serial_ir_tx;
+	if (hardware[type].set_send_carrier)
+		rcdev->s_tx_carrier = serial_ir_tx_carrier;
+	if (hardware[type].set_duty_cycle)
+		rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+	switch (type) {
+	case IR_HOMEBREW:
+		rcdev->input_name = "Serial IR type home-brew";
+		break;
+	case IR_IRDEO:
+		rcdev->input_name = "Serial IR type IRdeo";
+		break;
+	case IR_IRDEO_REMOTE:
+		rcdev->input_name = "Serial IR type IRdeo remote";
+		break;
+	case IR_ANIMAX:
+		rcdev->input_name = "Serial IR type AnimaX";
+		break;
+	case IR_IGOR:
+		rcdev->input_name = "Serial IR type IgorPlug";
+		break;
+	}
+
+	rcdev->input_phys = KBUILD_MODNAME "/input0";
+	rcdev->input_id.bustype = BUS_HOST;
+	rcdev->input_id.vendor = 0x0001;
+	rcdev->input_id.product = 0x0001;
+	rcdev->input_id.version = 0x0100;
+	rcdev->open = serial_ir_open;
+	rcdev->close = serial_ir_close;
+	rcdev->dev.parent = &serial_ir.pdev->dev;
+	rcdev->driver_type = RC_DRIVER_IR_RAW;
+	rcdev->allowed_protocols = RC_BIT_ALL;
+	rcdev->driver_name = KBUILD_MODNAME;
+	rcdev->map_name = RC_MAP_RC6_MCE;
+	rcdev->timeout = IR_DEFAULT_TIMEOUT;
+	rcdev->rx_resolution = 250000;
+
+	serial_ir.rcdev = rcdev;
+
+	result = rc_register_device(rcdev);
+
+	if (!result)
+		return 0;
+serial_cleanup:
+	serial_ir_exit();
+	return result;
+}
+
+static void __exit serial_ir_exit_module(void)
+{
+	rc_unregister_device(serial_ir.rcdev);
+	serial_ir_exit();
+}
+
+module_init(serial_ir_init_module);
+module_exit(serial_ir_exit_module);
+
+MODULE_DESCRIPTION("Infra-red receiver driver for serial ports.");
+MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, Christoph Bartelmus, Andrei Tanas");
+MODULE_LICENSE("GPL");
+
+module_param(type, int, 0444);
+MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug");
+
+module_param(io, int, 0444);
+MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");
+
+/* some architectures (e.g. intel xscale) have memory mapped registers */
+module_param(iommap, bool, 0444);
+MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory mapped io)");
+
+/*
+ * some architectures (e.g. intel xscale) align the 8bit serial registers
+ * on 32bit word boundaries.
+ * See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out()
+ */
+module_param(ioshift, int, 0444);
+MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)");
+
+module_param(irq, int, 0444);
+MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");
+
+module_param(share_irq, bool, 0444);
+MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)");
+
+module_param(sense, int, 0444);
+MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit (0 = active high, 1 = active low )");
+
+#ifdef CONFIG_IR_SERIAL_TRANSMITTER
+module_param(txsense, bool, 0444);
+MODULE_PARM_DESC(txsense, "Sense of transmitter circuit (0 = active high, 1 = active low )");
+#endif
+
+module_param(softcarrier, bool, 0444);
+MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)");