Merge tag 'spi-nor/for-6.4' into mtd/next

SPI NOR core changes:
* introduce Read While Write support for flashes featuring several banks
* set the 4-Byte Address Mode method based on SFDP data
* allow post_sfdp hook to return errors
* parse SCCR MC table and introduce support for multi-chip devices

SPI NOR manufacturer drivers changes:
* macronix: add support for mx25uw51245g with RWW
* spansion:
  - determine current address mode at runtime as it can be changed in a
    non-volatile way and differ from factory defaults or from what SFDP
    advertises.
  - enable JFFS2 write buffer mode for few ECC'd NOR flashes: S25FS256T,
    s25hx and s28hx
  - add support for s25hl02gt and s25hs02gt

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

1 files changed, 29 insertions, 7 deletions

diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 25423225c29d..fd61c4793a10 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -130,6 +130,8 @@ enum spi_nor_option_flags {
 	SNOR_F_IO_MODE_EN_VOLATILE = BIT(11),
 	SNOR_F_SOFT_RESET	= BIT(12),
 	SNOR_F_SWP_IS_VOLATILE	= BIT(13),
+	SNOR_F_RWW		= BIT(14),
+	SNOR_F_ECC		= BIT(15),
 };
 
 struct spi_nor_read_command {
@@ -336,7 +338,8 @@ struct spi_nor_otp {
  * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
  * Serial Flash Discoverable Parameters (SFDP) tables.
  *
- * @size:		the flash memory density in bytes.
+ * @bank_size:		the flash memory bank density in bytes.
+ * @size:		the total flash memory density in bytes.
  * @writesize		Minimal writable flash unit size. Defaults to 1. Set to
  *			ECC unit size for ECC-ed flashes.
  * @page_size:		the page size of the SPI NOR flash memory.
@@ -349,6 +352,8 @@ struct spi_nor_otp {
  *			in octal DTR mode.
  * @rdsr_addr_nbytes:	dummy address bytes needed for Read Status Register
  *			command in octal DTR mode.
+ * @n_dice:		number of dice in the flash memory.
+ * @vreg_offset:	volatile register offset for each die.
  * @hwcaps:		describes the read and page program hardware
  *			capabilities.
  * @reads:		read capabilities ordered by priority: the higher index
@@ -374,6 +379,7 @@ struct spi_nor_otp {
  * @locking_ops:	SPI NOR locking methods.
  */
 struct spi_nor_flash_parameter {
+	u64				bank_size;
 	u64				size;
 	u32				writesize;
 	u32				page_size;
@@ -381,6 +387,8 @@ struct spi_nor_flash_parameter {
 	u8				addr_mode_nbytes;
 	u8				rdsr_dummy;
 	u8				rdsr_addr_nbytes;
+	u8				n_dice;
+	u32				*vreg_offset;
 
 	struct spi_nor_hwcaps		hwcaps;
 	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
@@ -422,7 +430,7 @@ struct spi_nor_fixups {
 	int (*post_bfpt)(struct spi_nor *nor,
 			 const struct sfdp_parameter_header *bfpt_header,
 			 const struct sfdp_bfpt *bfpt);
-	void (*post_sfdp)(struct spi_nor *nor);
+	int (*post_sfdp)(struct spi_nor *nor);
 	void (*late_init)(struct spi_nor *nor);
 };
 
@@ -435,6 +443,7 @@ struct spi_nor_fixups {
  * @sector_size:    the size listed here is what works with SPINOR_OP_SE, which
  *                  isn't necessarily called a "sector" by the vendor.
  * @n_sectors:      the number of sectors.
+ * @n_banks:        the number of banks.
  * @page_size:      the flash's page size.
  * @addr_nbytes:    number of address bytes to send.
  *
@@ -459,6 +468,7 @@ struct spi_nor_fixups {
  *   NO_CHIP_ERASE:           chip does not support chip erase.
  *   SPI_NOR_NO_FR:           can't do fastread.
  *   SPI_NOR_QUAD_PP:         flash supports Quad Input Page Program.
+ *   SPI_NOR_RWW:             flash supports reads while write.
  *
  * @no_sfdp_flags:  flags that indicate support that can be discovered via SFDP.
  *                  Used when SFDP tables are not defined in the flash. These
@@ -495,6 +505,7 @@ struct flash_info {
 	unsigned sector_size;
 	u16 n_sectors;
 	u16 page_size;
+	u8 n_banks;
 	u8 addr_nbytes;
 
 	bool parse_sfdp;
@@ -509,6 +520,7 @@ struct flash_info {
 #define NO_CHIP_ERASE			BIT(7)
 #define SPI_NOR_NO_FR			BIT(8)
 #define SPI_NOR_QUAD_PP			BIT(9)
+#define SPI_NOR_RWW			BIT(10)
 
 	u8 no_sfdp_flags;
 #define SPI_NOR_SKIP_SFDP		BIT(0)
@@ -540,24 +552,30 @@ struct flash_info {
 	.id = { SPI_NOR_ID_3ITEMS(_jedec_id), SPI_NOR_ID_3ITEMS(_ext_id) }, \
 	.id_len = 6
 
-#define SPI_NOR_GEOMETRY(_sector_size, _n_sectors)			\
+#define SPI_NOR_GEOMETRY(_sector_size, _n_sectors, _n_banks)		\
 	.sector_size = (_sector_size),					\
 	.n_sectors = (_n_sectors),					\
-	.page_size = 256
+	.page_size = 256,						\
+	.n_banks = (_n_banks)
 
 /* Used when the "_ext_id" is two bytes at most */
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors)),
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
+
+#define INFOB(_jedec_id, _ext_id, _sector_size, _n_sectors, _n_banks)	\
+	SPI_NOR_ID((_jedec_id), (_ext_id)),				\
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), (_n_banks)),
 
 #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors)		\
 	SPI_NOR_ID6((_jedec_id), (_ext_id)),				\
-	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors)),
+	SPI_NOR_GEOMETRY((_sector_size), (_n_sectors), 1),
 
 #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_nbytes)	\
 		.sector_size = (_sector_size),				\
 		.n_sectors = (_n_sectors),				\
 		.page_size = (_page_size),				\
+		.n_banks = 1,						\
 		.addr_nbytes = (_addr_nbytes),				\
 		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,		\
 
@@ -634,10 +652,14 @@ void spi_nor_spimem_setup_op(const struct spi_nor *nor,
 			     const enum spi_nor_protocol proto);
 int spi_nor_write_enable(struct spi_nor *nor);
 int spi_nor_write_disable(struct spi_nor *nor);
+int spi_nor_set_4byte_addr_mode_en4b_ex4b(struct spi_nor *nor, bool enable);
+int spi_nor_set_4byte_addr_mode_wren_en4b_ex4b(struct spi_nor *nor,
+					       bool enable);
+int spi_nor_set_4byte_addr_mode_brwr(struct spi_nor *nor, bool enable);
 int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
 int spi_nor_wait_till_ready(struct spi_nor *nor);
 int spi_nor_global_block_unlock(struct spi_nor *nor);
-int spi_nor_lock_and_prep(struct spi_nor *nor);
+int spi_nor_prep_and_lock(struct spi_nor *nor);
 void spi_nor_unlock_and_unprep(struct spi_nor *nor);
 int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
 int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);