diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-03-05 04:23:56 +0100 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-03-05 04:23:56 +0100 |
commit | dcc75ddea1c3dde05db2f485d617dc8431177e33 (patch) | |
tree | 42f416f8519ebde96f368277559447c056d2b491 /drivers/mtd | |
parent | Merge tag 'regulator-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/b... (diff) | |
parent | Merge branch 'spi-5.1' into spi-next (diff) | |
download | linux-dcc75ddea1c3dde05db2f485d617dc8431177e33.tar.xz linux-dcc75ddea1c3dde05db2f485d617dc8431177e33.zip |
Merge tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly quiet release for SPI, the biggest thing is the conversion to
use GPIO descriptors which is now 90% done but still needs some
stragglers converting.
Summary:
- Support for inter-word delays
- Conversion of the core and most drivers to use GPIO descriptors for
GPIO controlled chip selects
- New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum"
* tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits)
spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3
spi: sifive: Remove redundant dev_err call in sifive_spi_probe()
spi: sifive: Remove spi_master_put in sifive_spi_remove()
spi: spi-gpio: fix SPI_CS_HIGH capability
spi: pxa2xx: Setup maximum supported DMA transfer length
spi: sifive: Add driver for the SiFive SPI controller
spi: sifive: Add DT documentation for SiFive SPI controller
spi: sprd: Add a prefix for SPI DMA channel macros
spi: sprd: spi: sprd: Add DMA mode support
dt-bindings: spi: Add the DMA properties for the SPI dma mode
spi: sprd: Add the SPI irq function for the SPI DMA mode
dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible
spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO
spi: gpio: Advertise support for SPI_CS_HIGH
spi: sh-msiof: Replace spi_master by spi_controller
spi: sh-hspi: Replace spi_master by spi_controller
spi: rspi: Replace spi_master by spi_controller
spi: atmel-quadspi: add support for sam9x60 qspi controller
dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60
spi: atmel-quadspi: add support for named peripheral clock
...
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/spi-nor/Kconfig | 9 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/fsl-quadspi.c | 1224 |
3 files changed, 0 insertions, 1234 deletions
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 414e88749b1f..dab986691267 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -42,15 +42,6 @@ config SPI_CADENCE_QUADSPI device with a Cadence QSPI controller and want to access the Flash as an MTD device. -config SPI_FSL_QUADSPI - tristate "Freescale Quad SPI controller" - depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST - depends on HAS_IOMEM - help - This enables support for the Quad SPI controller in master mode. - This controller does not support generic SPI. It only supports - SPI NOR. - config SPI_HISI_SFC tristate "Hisilicon SPI-NOR Flash Controller(SFC)" depends on ARCH_HISI || COMPILE_TEST diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 4e4d4005d7a6..189a15cca3ec 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -2,7 +2,6 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o -obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o obj-$(CONFIG_SPI_MTK_QUADSPI) += mtk-quadspi.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c deleted file mode 100644 index 1ff3430f82c8..000000000000 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ /dev/null @@ -1,1224 +0,0 @@ -/* - * Freescale QuadSPI driver. - * - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/timer.h> -#include <linux/jiffies.h> -#include <linux/completion.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/spi-nor.h> -#include <linux/mutex.h> -#include <linux/pm_qos.h> -#include <linux/sizes.h> - -/* Controller needs driver to swap endian */ -#define QUADSPI_QUIRK_SWAP_ENDIAN (1 << 0) -/* Controller needs 4x internal clock */ -#define QUADSPI_QUIRK_4X_INT_CLK (1 << 1) -/* - * TKT253890, Controller needs driver to fill txfifo till 16 byte to - * trigger data transfer even though extern data will not transferred. - */ -#define QUADSPI_QUIRK_TKT253890 (1 << 2) -/* Controller cannot wake up from wait mode, TKT245618 */ -#define QUADSPI_QUIRK_TKT245618 (1 << 3) - -/* The registers */ -#define QUADSPI_MCR 0x00 -#define QUADSPI_MCR_RESERVED_SHIFT 16 -#define QUADSPI_MCR_RESERVED_MASK (0xF << QUADSPI_MCR_RESERVED_SHIFT) -#define QUADSPI_MCR_MDIS_SHIFT 14 -#define QUADSPI_MCR_MDIS_MASK (1 << QUADSPI_MCR_MDIS_SHIFT) -#define QUADSPI_MCR_CLR_TXF_SHIFT 11 -#define QUADSPI_MCR_CLR_TXF_MASK (1 << QUADSPI_MCR_CLR_TXF_SHIFT) -#define QUADSPI_MCR_CLR_RXF_SHIFT 10 -#define QUADSPI_MCR_CLR_RXF_MASK (1 << QUADSPI_MCR_CLR_RXF_SHIFT) -#define QUADSPI_MCR_DDR_EN_SHIFT 7 -#define QUADSPI_MCR_DDR_EN_MASK (1 << QUADSPI_MCR_DDR_EN_SHIFT) -#define QUADSPI_MCR_END_CFG_SHIFT 2 -#define QUADSPI_MCR_END_CFG_MASK (3 << QUADSPI_MCR_END_CFG_SHIFT) -#define QUADSPI_MCR_SWRSTHD_SHIFT 1 -#define QUADSPI_MCR_SWRSTHD_MASK (1 << QUADSPI_MCR_SWRSTHD_SHIFT) -#define QUADSPI_MCR_SWRSTSD_SHIFT 0 -#define QUADSPI_MCR_SWRSTSD_MASK (1 << QUADSPI_MCR_SWRSTSD_SHIFT) - -#define QUADSPI_IPCR 0x08 -#define QUADSPI_IPCR_SEQID_SHIFT 24 -#define QUADSPI_IPCR_SEQID_MASK (0xF << QUADSPI_IPCR_SEQID_SHIFT) - -#define QUADSPI_BUF0CR 0x10 -#define QUADSPI_BUF1CR 0x14 -#define QUADSPI_BUF2CR 0x18 -#define QUADSPI_BUFXCR_INVALID_MSTRID 0xe - -#define QUADSPI_BUF3CR 0x1c -#define QUADSPI_BUF3CR_ALLMST_SHIFT 31 -#define QUADSPI_BUF3CR_ALLMST_MASK (1 << QUADSPI_BUF3CR_ALLMST_SHIFT) -#define QUADSPI_BUF3CR_ADATSZ_SHIFT 8 -#define QUADSPI_BUF3CR_ADATSZ_MASK (0xFF << QUADSPI_BUF3CR_ADATSZ_SHIFT) - -#define QUADSPI_BFGENCR 0x20 -#define QUADSPI_BFGENCR_PAR_EN_SHIFT 16 -#define QUADSPI_BFGENCR_PAR_EN_MASK (1 << (QUADSPI_BFGENCR_PAR_EN_SHIFT)) -#define QUADSPI_BFGENCR_SEQID_SHIFT 12 -#define QUADSPI_BFGENCR_SEQID_MASK (0xF << QUADSPI_BFGENCR_SEQID_SHIFT) - -#define QUADSPI_BUF0IND 0x30 -#define QUADSPI_BUF1IND 0x34 -#define QUADSPI_BUF2IND 0x38 -#define QUADSPI_SFAR 0x100 - -#define QUADSPI_SMPR 0x108 -#define QUADSPI_SMPR_DDRSMP_SHIFT 16 -#define QUADSPI_SMPR_DDRSMP_MASK (7 << QUADSPI_SMPR_DDRSMP_SHIFT) -#define QUADSPI_SMPR_FSDLY_SHIFT 6 -#define QUADSPI_SMPR_FSDLY_MASK (1 << QUADSPI_SMPR_FSDLY_SHIFT) -#define QUADSPI_SMPR_FSPHS_SHIFT 5 -#define QUADSPI_SMPR_FSPHS_MASK (1 << QUADSPI_SMPR_FSPHS_SHIFT) -#define QUADSPI_SMPR_HSENA_SHIFT 0 -#define QUADSPI_SMPR_HSENA_MASK (1 << QUADSPI_SMPR_HSENA_SHIFT) - -#define QUADSPI_RBSR 0x10c -#define QUADSPI_RBSR_RDBFL_SHIFT 8 -#define QUADSPI_RBSR_RDBFL_MASK (0x3F << QUADSPI_RBSR_RDBFL_SHIFT) - -#define QUADSPI_RBCT 0x110 -#define QUADSPI_RBCT_WMRK_MASK 0x1F -#define QUADSPI_RBCT_RXBRD_SHIFT 8 -#define QUADSPI_RBCT_RXBRD_USEIPS (0x1 << QUADSPI_RBCT_RXBRD_SHIFT) - -#define QUADSPI_TBSR 0x150 -#define QUADSPI_TBDR 0x154 -#define QUADSPI_SR 0x15c -#define QUADSPI_SR_IP_ACC_SHIFT 1 -#define QUADSPI_SR_IP_ACC_MASK (0x1 << QUADSPI_SR_IP_ACC_SHIFT) -#define QUADSPI_SR_AHB_ACC_SHIFT 2 -#define QUADSPI_SR_AHB_ACC_MASK (0x1 << QUADSPI_SR_AHB_ACC_SHIFT) - -#define QUADSPI_FR 0x160 -#define QUADSPI_FR_TFF_MASK 0x1 - -#define QUADSPI_SFA1AD 0x180 -#define QUADSPI_SFA2AD 0x184 -#define QUADSPI_SFB1AD 0x188 -#define QUADSPI_SFB2AD 0x18c -#define QUADSPI_RBDR 0x200 - -#define QUADSPI_LUTKEY 0x300 -#define QUADSPI_LUTKEY_VALUE 0x5AF05AF0 - -#define QUADSPI_LCKCR 0x304 -#define QUADSPI_LCKER_LOCK 0x1 -#define QUADSPI_LCKER_UNLOCK 0x2 - -#define QUADSPI_RSER 0x164 -#define QUADSPI_RSER_TFIE (0x1 << 0) - -#define QUADSPI_LUT_BASE 0x310 - -/* - * The definition of the LUT register shows below: - * - * --------------------------------------------------- - * | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | - * --------------------------------------------------- - */ -#define OPRND0_SHIFT 0 -#define PAD0_SHIFT 8 -#define INSTR0_SHIFT 10 -#define OPRND1_SHIFT 16 - -/* Instruction set for the LUT register. */ -#define LUT_STOP 0 -#define LUT_CMD 1 -#define LUT_ADDR 2 -#define LUT_DUMMY 3 -#define LUT_MODE 4 -#define LUT_MODE2 5 -#define LUT_MODE4 6 -#define LUT_FSL_READ 7 -#define LUT_FSL_WRITE 8 -#define LUT_JMP_ON_CS 9 -#define LUT_ADDR_DDR 10 -#define LUT_MODE_DDR 11 -#define LUT_MODE2_DDR 12 -#define LUT_MODE4_DDR 13 -#define LUT_FSL_READ_DDR 14 -#define LUT_FSL_WRITE_DDR 15 -#define LUT_DATA_LEARN 16 - -/* - * The PAD definitions for LUT register. - * - * The pad stands for the lines number of IO[0:3]. - * For example, the Quad read need four IO lines, so you should - * set LUT_PAD4 which means we use four IO lines. - */ -#define LUT_PAD1 0 -#define LUT_PAD2 1 -#define LUT_PAD4 2 - -/* Oprands for the LUT register. */ -#define ADDR24BIT 0x18 -#define ADDR32BIT 0x20 - -/* Macros for constructing the LUT register. */ -#define LUT0(ins, pad, opr) \ - (((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \ - ((LUT_##ins) << INSTR0_SHIFT)) - -#define LUT1(ins, pad, opr) (LUT0(ins, pad, opr) << OPRND1_SHIFT) - -/* other macros for LUT register. */ -#define QUADSPI_LUT(x) (QUADSPI_LUT_BASE + (x) * 4) -#define QUADSPI_LUT_NUM 64 - -/* SEQID -- we can have 16 seqids at most. */ -#define SEQID_READ 0 -#define SEQID_WREN 1 -#define SEQID_WRDI 2 -#define SEQID_RDSR 3 -#define SEQID_SE 4 -#define SEQID_CHIP_ERASE 5 -#define SEQID_PP 6 -#define SEQID_RDID 7 -#define SEQID_WRSR 8 -#define SEQID_RDCR 9 -#define SEQID_EN4B 10 -#define SEQID_BRWR 11 - -#define QUADSPI_MIN_IOMAP SZ_4M - -enum fsl_qspi_devtype { - FSL_QUADSPI_VYBRID, - FSL_QUADSPI_IMX6SX, - FSL_QUADSPI_IMX7D, - FSL_QUADSPI_IMX6UL, - FSL_QUADSPI_LS1021A, - FSL_QUADSPI_LS2080A, -}; - -struct fsl_qspi_devtype_data { - enum fsl_qspi_devtype devtype; - int rxfifo; - int txfifo; - int ahb_buf_size; - int driver_data; -}; - -static const struct fsl_qspi_devtype_data vybrid_data = { - .devtype = FSL_QUADSPI_VYBRID, - .rxfifo = 128, - .txfifo = 64, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_SWAP_ENDIAN, -}; - -static const struct fsl_qspi_devtype_data imx6sx_data = { - .devtype = FSL_QUADSPI_IMX6SX, - .rxfifo = 128, - .txfifo = 512, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_4X_INT_CLK - | QUADSPI_QUIRK_TKT245618, -}; - -static const struct fsl_qspi_devtype_data imx7d_data = { - .devtype = FSL_QUADSPI_IMX7D, - .rxfifo = 512, - .txfifo = 512, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_TKT253890 - | QUADSPI_QUIRK_4X_INT_CLK, -}; - -static const struct fsl_qspi_devtype_data imx6ul_data = { - .devtype = FSL_QUADSPI_IMX6UL, - .rxfifo = 128, - .txfifo = 512, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_TKT253890 - | QUADSPI_QUIRK_4X_INT_CLK, -}; - -static struct fsl_qspi_devtype_data ls1021a_data = { - .devtype = FSL_QUADSPI_LS1021A, - .rxfifo = 128, - .txfifo = 64, - .ahb_buf_size = 1024, - .driver_data = 0, -}; - -static const struct fsl_qspi_devtype_data ls2080a_data = { - .devtype = FSL_QUADSPI_LS2080A, - .rxfifo = 128, - .txfifo = 64, - .ahb_buf_size = 1024, - .driver_data = QUADSPI_QUIRK_TKT253890, -}; - - -#define FSL_QSPI_MAX_CHIP 4 -struct fsl_qspi { - struct spi_nor nor[FSL_QSPI_MAX_CHIP]; - void __iomem *iobase; - void __iomem *ahb_addr; - u32 memmap_phy; - u32 memmap_offs; - u32 memmap_len; - struct clk *clk, *clk_en; - struct device *dev; - struct completion c; - const struct fsl_qspi_devtype_data *devtype_data; - u32 nor_size; - u32 nor_num; - u32 clk_rate; - unsigned int chip_base_addr; /* We may support two chips. */ - bool has_second_chip; - bool big_endian; - struct mutex lock; - struct pm_qos_request pm_qos_req; -}; - -static inline int needs_swap_endian(struct fsl_qspi *q) -{ - return q->devtype_data->driver_data & QUADSPI_QUIRK_SWAP_ENDIAN; -} - -static inline int needs_4x_clock(struct fsl_qspi *q) -{ - return q->devtype_data->driver_data & QUADSPI_QUIRK_4X_INT_CLK; -} - -static inline int needs_fill_txfifo(struct fsl_qspi *q) -{ - return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT253890; -} - -static inline int needs_wakeup_wait_mode(struct fsl_qspi *q) -{ - return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618; -} - -/* - * R/W functions for big- or little-endian registers: - * The qSPI controller's endian is independent of the CPU core's endian. - * So far, although the CPU core is little-endian but the qSPI have two - * versions for big-endian and little-endian. - */ -static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr) -{ - if (q->big_endian) - iowrite32be(val, addr); - else - iowrite32(val, addr); -} - -static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr) -{ - if (q->big_endian) - return ioread32be(addr); - else - return ioread32(addr); -} - -/* - * An IC bug makes us to re-arrange the 32-bit data. - * The following chips, such as IMX6SLX, have fixed this bug. - */ -static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a) -{ - return needs_swap_endian(q) ? __swab32(a) : a; -} - -static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q) -{ - qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); - qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR); -} - -static inline void fsl_qspi_lock_lut(struct fsl_qspi *q) -{ - qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); - qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR); -} - -static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id) -{ - struct fsl_qspi *q = dev_id; - u32 reg; - - /* clear interrupt */ - reg = qspi_readl(q, q->iobase + QUADSPI_FR); - qspi_writel(q, reg, q->iobase + QUADSPI_FR); - - if (reg & QUADSPI_FR_TFF_MASK) - complete(&q->c); - - dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", q->chip_base_addr, reg); - return IRQ_HANDLED; -} - -static void fsl_qspi_init_lut(struct fsl_qspi *q) -{ - void __iomem *base = q->iobase; - int rxfifo = q->devtype_data->rxfifo; - u32 lut_base; - int i; - - struct spi_nor *nor = &q->nor[0]; - u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT; - u8 read_op = nor->read_opcode; - u8 read_dm = nor->read_dummy; - - fsl_qspi_unlock_lut(q); - - /* Clear all the LUT table */ - for (i = 0; i < QUADSPI_LUT_NUM; i++) - qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4); - - /* Read */ - lut_base = SEQID_READ * 4; - - qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), - base + QUADSPI_LUT(lut_base)); - qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | - LUT1(FSL_READ, PAD4, rxfifo), - base + QUADSPI_LUT(lut_base + 1)); - - /* Write enable */ - lut_base = SEQID_WREN * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WREN), - base + QUADSPI_LUT(lut_base)); - - /* Page Program */ - lut_base = SEQID_PP * 4; - - qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) | - LUT1(ADDR, PAD1, addrlen), - base + QUADSPI_LUT(lut_base)); - qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0), - base + QUADSPI_LUT(lut_base + 1)); - - /* Read Status */ - lut_base = SEQID_RDSR * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDSR) | - LUT1(FSL_READ, PAD1, 0x1), - base + QUADSPI_LUT(lut_base)); - - /* Erase a sector */ - lut_base = SEQID_SE * 4; - - qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) | - LUT1(ADDR, PAD1, addrlen), - base + QUADSPI_LUT(lut_base)); - - /* Erase the whole chip */ - lut_base = SEQID_CHIP_ERASE * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE), - base + QUADSPI_LUT(lut_base)); - - /* READ ID */ - lut_base = SEQID_RDID * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDID) | - LUT1(FSL_READ, PAD1, 0x8), - base + QUADSPI_LUT(lut_base)); - - /* Write Register */ - lut_base = SEQID_WRSR * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRSR) | - LUT1(FSL_WRITE, PAD1, 0x2), - base + QUADSPI_LUT(lut_base)); - - /* Read Configuration Register */ - lut_base = SEQID_RDCR * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDCR) | - LUT1(FSL_READ, PAD1, 0x1), - base + QUADSPI_LUT(lut_base)); - - /* Write disable */ - lut_base = SEQID_WRDI * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRDI), - base + QUADSPI_LUT(lut_base)); - - /* Enter 4 Byte Mode (Micron) */ - lut_base = SEQID_EN4B * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_EN4B), - base + QUADSPI_LUT(lut_base)); - - /* Enter 4 Byte Mode (Spansion) */ - lut_base = SEQID_BRWR * 4; - qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR), - base + QUADSPI_LUT(lut_base)); - - fsl_qspi_lock_lut(q); -} - -/* Get the SEQID for the command */ -static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) -{ - switch (cmd) { - case SPINOR_OP_READ_1_1_4: - case SPINOR_OP_READ_1_1_4_4B: - return SEQID_READ; - case SPINOR_OP_WREN: - return SEQID_WREN; - case SPINOR_OP_WRDI: - return SEQID_WRDI; - case SPINOR_OP_RDSR: - return SEQID_RDSR; - case SPINOR_OP_SE: - return SEQID_SE; - case SPINOR_OP_CHIP_ERASE: - return SEQID_CHIP_ERASE; - case SPINOR_OP_PP: - return SEQID_PP; - case SPINOR_OP_RDID: - return SEQID_RDID; - case SPINOR_OP_WRSR: - return SEQID_WRSR; - case SPINOR_OP_RDCR: - return SEQID_RDCR; - case SPINOR_OP_EN4B: - return SEQID_EN4B; - case SPINOR_OP_BRWR: - return SEQID_BRWR; - default: - if (cmd == q->nor[0].erase_opcode) - return SEQID_SE; - dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd); - break; - } - return -EINVAL; -} - -static int -fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len) -{ - void __iomem *base = q->iobase; - int seqid; - u32 reg, reg2; - int err; - - init_completion(&q->c); - dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n", - q->chip_base_addr, addr, len, cmd); - - /* save the reg */ - reg = qspi_readl(q, base + QUADSPI_MCR); - - qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr, - base + QUADSPI_SFAR); - qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS, - base + QUADSPI_RBCT); - qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR); - - do { - reg2 = qspi_readl(q, base + QUADSPI_SR); - if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) { - udelay(1); - dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2); - continue; - } - break; - } while (1); - - /* trigger the LUT now */ - seqid = fsl_qspi_get_seqid(q, cmd); - if (seqid < 0) - return seqid; - - qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, - base + QUADSPI_IPCR); - - /* Wait for the interrupt. */ - if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) { - dev_err(q->dev, - "cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n", - cmd, addr, qspi_readl(q, base + QUADSPI_FR), - qspi_readl(q, base + QUADSPI_SR)); - err = -ETIMEDOUT; - } else { - err = 0; - } - - /* restore the MCR */ - qspi_writel(q, reg, base + QUADSPI_MCR); - - return err; -} - -/* Read out the data from the QUADSPI_RBDR buffer registers. */ -static void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf) -{ - u32 tmp; - int i = 0; - - while (len > 0) { - tmp = qspi_readl(q, q->iobase + QUADSPI_RBDR + i * 4); - tmp = fsl_qspi_endian_xchg(q, tmp); - dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n", - q->chip_base_addr, tmp); - - if (len >= 4) { - *((u32 *)rxbuf) = tmp; - rxbuf += 4; - } else { - memcpy(rxbuf, &tmp, len); - break; - } - - len -= 4; - i++; - } -} - -/* - * If we have changed the content of the flash by writing or erasing, - * we need to invalidate the AHB buffer. If we do not do so, we may read out - * the wrong data. The spec tells us reset the AHB domain and Serial Flash - * domain at the same time. - */ -static inline void fsl_qspi_invalid(struct fsl_qspi *q) -{ - u32 reg; - - reg = qspi_readl(q, q->iobase + QUADSPI_MCR); - reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK; - qspi_writel(q, reg, q->iobase + QUADSPI_MCR); - - /* - * The minimum delay : 1 AHB + 2 SFCK clocks. - * Delay 1 us is enough. - */ - udelay(1); - - reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK); - qspi_writel(q, reg, q->iobase + QUADSPI_MCR); -} - -static ssize_t fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, - u8 opcode, unsigned int to, u32 *txbuf, - unsigned count) -{ - int ret, i, j; - u32 tmp; - - dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len : %d\n", - q->chip_base_addr, to, count); - - /* clear the TX FIFO. */ - tmp = qspi_readl(q, q->iobase + QUADSPI_MCR); - qspi_writel(q, tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR); - - /* fill the TX data to the FIFO */ - for (j = 0, i = ((count + 3) / 4); j < i; j++) { - tmp = fsl_qspi_endian_xchg(q, *txbuf); - qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR); - txbuf++; - } - - /* fill the TXFIFO upto 16 bytes for i.MX7d */ - if (needs_fill_txfifo(q)) - for (; i < 4; i++) - qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR); - - /* Trigger it */ - ret = fsl_qspi_runcmd(q, opcode, to, count); - - if (ret == 0) - return count; - - return ret; -} - -static void fsl_qspi_set_map_addr(struct fsl_qspi *q) -{ - int nor_size = q->nor_size; - void __iomem *base = q->iobase; - - qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD); - qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD); - qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD); - qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD); -} - -/* - * There are two different ways to read out the data from the flash: - * the "IP Command Read" and the "AHB Command Read". - * - * The IC guy suggests we use the "AHB Command Read" which is faster - * then the "IP Command Read". (What's more is that there is a bug in - * the "IP Command Read" in the Vybrid.) - * - * After we set up the registers for the "AHB Command Read", we can use - * the memcpy to read the data directly. A "missed" access to the buffer - * causes the controller to clear the buffer, and use the sequence pointed - * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash. - */ -static int fsl_qspi_init_ahb_read(struct fsl_qspi *q) -{ - void __iomem *base = q->iobase; - int seqid; - - /* AHB configuration for access buffer 0/1/2 .*/ - qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR); - qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR); - qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR); - /* - * Set ADATSZ with the maximum AHB buffer size to improve the - * read performance. - */ - qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK | - ((q->devtype_data->ahb_buf_size / 8) - << QUADSPI_BUF3CR_ADATSZ_SHIFT), - base + QUADSPI_BUF3CR); - - /* We only use the buffer3 */ - qspi_writel(q, 0, base + QUADSPI_BUF0IND); - qspi_writel(q, 0, base + QUADSPI_BUF1IND); - qspi_writel(q, 0, base + QUADSPI_BUF2IND); - - /* Set the default lut sequence for AHB Read. */ - seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode); - if (seqid < 0) - return seqid; - - qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT, - q->iobase + QUADSPI_BFGENCR); - - return 0; -} - -/* This function was used to prepare and enable QSPI clock */ -static int fsl_qspi_clk_prep_enable(struct fsl_qspi *q) -{ - int ret; - - ret = clk_prepare_enable(q->clk_en); - if (ret) - return ret; - - ret = clk_prepare_enable(q->clk); - if (ret) { - clk_disable_unprepare(q->clk_en); - return ret; - } - - if (needs_wakeup_wait_mode(q)) - pm_qos_add_request(&q->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, 0); - - return 0; -} - -/* This function was used to disable and unprepare QSPI clock */ -static void fsl_qspi_clk_disable_unprep(struct fsl_qspi *q) -{ - if (needs_wakeup_wait_mode(q)) - pm_qos_remove_request(&q->pm_qos_req); - - clk_disable_unprepare(q->clk); - clk_disable_unprepare(q->clk_en); - -} - -/* We use this function to do some basic init for spi_nor_scan(). */ -static int fsl_qspi_nor_setup(struct fsl_qspi *q) -{ - void __iomem *base = q->iobase; - u32 reg; - int ret; - - /* disable and unprepare clock to avoid glitch pass to controller */ - fsl_qspi_clk_disable_unprep(q); - - /* the default frequency, we will change it in the future. */ - ret = clk_set_rate(q->clk, 66000000); - if (ret) - return ret; - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) - return ret; - - /* Reset the module */ - qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK, - base + QUADSPI_MCR); - udelay(1); - - /* Init the LUT table. */ - fsl_qspi_init_lut(q); - - /* Disable the module */ - qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK, - base + QUADSPI_MCR); - - reg = qspi_readl(q, base + QUADSPI_SMPR); - qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK - | QUADSPI_SMPR_FSPHS_MASK - | QUADSPI_SMPR_HSENA_MASK - | QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR); - - /* Enable the module */ - qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK, - base + QUADSPI_MCR); - - /* clear all interrupt status */ - qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR); - - /* enable the interrupt */ - qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); - - return 0; -} - -static int fsl_qspi_nor_setup_last(struct fsl_qspi *q) -{ - unsigned long rate = q->clk_rate; - int ret; - - if (needs_4x_clock(q)) - rate *= 4; - - /* disable and unprepare clock to avoid glitch pass to controller */ - fsl_qspi_clk_disable_unprep(q); - - ret = clk_set_rate(q->clk, rate); - if (ret) - return ret; - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) - return ret; - - /* Init the LUT table again. */ - fsl_qspi_init_lut(q); - - /* Init for AHB read */ - return fsl_qspi_init_ahb_read(q); -} - -static const struct of_device_id fsl_qspi_dt_ids[] = { - { .compatible = "fsl,vf610-qspi", .data = &vybrid_data, }, - { .compatible = "fsl,imx6sx-qspi", .data = &imx6sx_data, }, - { .compatible = "fsl,imx7d-qspi", .data = &imx7d_data, }, - { .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, }, - { .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, }, - { .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); - -static void fsl_qspi_set_base_addr(struct fsl_qspi *q, struct spi_nor *nor) -{ - q->chip_base_addr = q->nor_size * (nor - q->nor); -} - -static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) -{ - int ret; - struct fsl_qspi *q = nor->priv; - - ret = fsl_qspi_runcmd(q, opcode, 0, len); - if (ret) - return ret; - - fsl_qspi_read_data(q, len, buf); - return 0; -} - -static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) -{ - struct fsl_qspi *q = nor->priv; - int ret; - - if (!buf) { - ret = fsl_qspi_runcmd(q, opcode, 0, 1); - if (ret) - return ret; - - if (opcode == SPINOR_OP_CHIP_ERASE) - fsl_qspi_invalid(q); - - } else if (len > 0) { - ret = fsl_qspi_nor_write(q, nor, opcode, 0, - (u32 *)buf, len); - if (ret > 0) - return 0; - } else { - dev_err(q->dev, "invalid cmd %d\n", opcode); - ret = -EINVAL; - } - - return ret; -} - -static ssize_t fsl_qspi_write(struct spi_nor *nor, loff_t to, - size_t len, const u_char *buf) -{ - struct fsl_qspi *q = nor->priv; - ssize_t ret = fsl_qspi_nor_write(q, nor, nor->program_opcode, to, - (u32 *)buf, len); - - /* invalid the data in the AHB buffer. */ - fsl_qspi_invalid(q); - return ret; -} - -static ssize_t fsl_qspi_read(struct spi_nor *nor, loff_t from, - size_t len, u_char *buf) -{ - struct fsl_qspi *q = nor->priv; - u8 cmd = nor->read_opcode; - - /* if necessary,ioremap buffer before AHB read, */ - if (!q->ahb_addr) { - q->memmap_offs = q->chip_base_addr + from; - q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP; - - q->ahb_addr = ioremap_nocache( - q->memmap_phy + q->memmap_offs, - q->memmap_len); - if (!q->ahb_addr) { - dev_err(q->dev, "ioremap failed\n"); - return -ENOMEM; - } - /* ioremap if the data requested is out of range */ - } else if (q->chip_base_addr + from < q->memmap_offs - || q->chip_base_addr + from + len > - q->memmap_offs + q->memmap_len) { - iounmap(q->ahb_addr); - - q->memmap_offs = q->chip_base_addr + from; - q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP; - q->ahb_addr = ioremap_nocache( - q->memmap_phy + q->memmap_offs, - q->memmap_len); - if (!q->ahb_addr) { - dev_err(q->dev, "ioremap failed\n"); - return -ENOMEM; - } - } - - dev_dbg(q->dev, "cmd [%x],read from %p, len:%zd\n", - cmd, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, - len); - - /* Read out the data directly from the AHB buffer.*/ - memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, - len); - - return len; -} - -static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs) -{ - struct fsl_qspi *q = nor->priv; - int ret; - - dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n", - nor->mtd.erasesize / 1024, q->chip_base_addr, (u32)offs); - - ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0); - if (ret) - return ret; - - fsl_qspi_invalid(q); - return 0; -} - -static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops) -{ - struct fsl_qspi *q = nor->priv; - int ret; - - mutex_lock(&q->lock); - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) - goto err_mutex; - - fsl_qspi_set_base_addr(q, nor); - return 0; - -err_mutex: - mutex_unlock(&q->lock); - return ret; -} - -static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) -{ - struct fsl_qspi *q = nor->priv; - - fsl_qspi_clk_disable_unprep(q); - mutex_unlock(&q->lock); -} - -static int fsl_qspi_probe(struct platform_device *pdev) -{ - const struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ_1_1_4 | - SNOR_HWCAPS_PP, - }; - struct device_node *np = pdev->dev.of_node; - struct device *dev = &pdev->dev; - struct fsl_qspi *q; - struct resource *res; - struct spi_nor *nor; - struct mtd_info *mtd; - int ret, i = 0; - - q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL); - if (!q) - return -ENOMEM; - - q->nor_num = of_get_child_count(dev->of_node); - if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP) - return -ENODEV; - - q->dev = dev; - q->devtype_data = of_device_get_match_data(dev); - if (!q->devtype_data) - return -ENODEV; - platform_set_drvdata(pdev, q); - - /* find the resources */ - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI"); - q->iobase = devm_ioremap_resource(dev, res); - if (IS_ERR(q->iobase)) - return PTR_ERR(q->iobase); - - q->big_endian = of_property_read_bool(np, "big-endian"); - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "QuadSPI-memory"); - if (!devm_request_mem_region(dev, res->start, resource_size(res), - res->name)) { - dev_err(dev, "can't request region for resource %pR\n", res); - return -EBUSY; - } - - q->memmap_phy = res->start; - - /* find the clocks */ - q->clk_en = devm_clk_get(dev, "qspi_en"); - if (IS_ERR(q->clk_en)) - return PTR_ERR(q->clk_en); - - q->clk = devm_clk_get(dev, "qspi"); - if (IS_ERR(q->clk)) - return PTR_ERR(q->clk); - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) { - dev_err(dev, "can not enable the clock\n"); - goto clk_failed; - } - - /* find the irq */ - ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(dev, "failed to get the irq: %d\n", ret); - goto irq_failed; - } - - ret = devm_request_irq(dev, ret, - fsl_qspi_irq_handler, 0, pdev->name, q); - if (ret) { - dev_err(dev, "failed to request irq: %d\n", ret); - goto irq_failed; - } - - ret = fsl_qspi_nor_setup(q); - if (ret) - goto irq_failed; - - if (of_get_property(np, "fsl,qspi-has-second-chip", NULL)) - q->has_second_chip = true; - - mutex_init(&q->lock); - - /* iterate the subnodes. */ - for_each_available_child_of_node(dev->of_node, np) { - /* skip the holes */ - if (!q->has_second_chip) - i *= 2; - - nor = &q->nor[i]; - mtd = &nor->mtd; - - nor->dev = dev; - spi_nor_set_flash_node(nor, np); - nor->priv = q; - - if (q->nor_num > 1 && !mtd->name) { - int spiflash_idx; - - ret = of_property_read_u32(np, "reg", &spiflash_idx); - if (!ret) { - mtd->name = devm_kasprintf(dev, GFP_KERNEL, - "%s-%d", - dev_name(dev), - spiflash_idx); - if (!mtd->name) { - ret = -ENOMEM; - goto mutex_failed; - } - } else { - dev_warn(dev, "reg property is missing\n"); - } - } - - /* fill the hooks */ - nor->read_reg = fsl_qspi_read_reg; - nor->write_reg = fsl_qspi_write_reg; - nor->read = fsl_qspi_read; - nor->write = fsl_qspi_write; - nor->erase = fsl_qspi_erase; - - nor->prepare = fsl_qspi_prep; - nor->unprepare = fsl_qspi_unprep; - - ret = of_property_read_u32(np, "spi-max-frequency", - &q->clk_rate); - if (ret < 0) - goto mutex_failed; - - /* set the chip address for READID */ - fsl_qspi_set_base_addr(q, nor); - - ret = spi_nor_scan(nor, NULL, &hwcaps); - if (ret) - goto mutex_failed; - - ret = mtd_device_register(mtd, NULL, 0); - if (ret) - goto mutex_failed; - - /* Set the correct NOR size now. */ - if (q->nor_size == 0) { - q->nor_size = mtd->size; - - /* Map the SPI NOR to accessiable address */ - fsl_qspi_set_map_addr(q); - } - - /* - * The TX FIFO is 64 bytes in the Vybrid, but the Page Program - * may writes 265 bytes per time. The write is working in the - * unit of the TX FIFO, not in the unit of the SPI NOR's page - * size. - * - * So shrink the spi_nor->page_size if it is larger then the - * TX FIFO. - */ - if (nor->page_size > q->devtype_data->txfifo) - nor->page_size = q->devtype_data->txfifo; - - i++; - } - - /* finish the rest init. */ - ret = fsl_qspi_nor_setup_last(q); - if (ret) - goto last_init_failed; - - fsl_qspi_clk_disable_unprep(q); - return 0; - -last_init_failed: - for (i = 0; i < q->nor_num; i++) { - /* skip the holes */ - if (!q->has_second_chip) - i *= 2; - mtd_device_unregister(&q->nor[i].mtd); - } -mutex_failed: - mutex_destroy(&q->lock); -irq_failed: - fsl_qspi_clk_disable_unprep(q); -clk_failed: - dev_err(dev, "Freescale QuadSPI probe failed\n"); - return ret; -} - -static int fsl_qspi_remove(struct platform_device *pdev) -{ - struct fsl_qspi *q = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < q->nor_num; i++) { - /* skip the holes */ - if (!q->has_second_chip) - i *= 2; - mtd_device_unregister(&q->nor[i].mtd); - } - - /* disable the hardware */ - qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); - qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); - - mutex_destroy(&q->lock); - - if (q->ahb_addr) - iounmap(q->ahb_addr); - - return 0; -} - -static int fsl_qspi_suspend(struct platform_device *pdev, pm_message_t state) -{ - return 0; -} - -static int fsl_qspi_resume(struct platform_device *pdev) -{ - int ret; - struct fsl_qspi *q = platform_get_drvdata(pdev); - - ret = fsl_qspi_clk_prep_enable(q); - if (ret) - return ret; - - fsl_qspi_nor_setup(q); - fsl_qspi_set_map_addr(q); - fsl_qspi_nor_setup_last(q); - - fsl_qspi_clk_disable_unprep(q); - - return 0; -} - -static struct platform_driver fsl_qspi_driver = { - .driver = { - .name = "fsl-quadspi", - .of_match_table = fsl_qspi_dt_ids, - }, - .probe = fsl_qspi_probe, - .remove = fsl_qspi_remove, - .suspend = fsl_qspi_suspend, - .resume = fsl_qspi_resume, -}; -module_platform_driver(fsl_qspi_driver); - -MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver"); -MODULE_AUTHOR("Freescale Semiconductor Inc."); -MODULE_LICENSE("GPL v2"); |