diff options
| author | Emil Tantilov <emil.s.tantilov@intel.com> | 2012-12-19 08:14:17 +0100 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2013-02-05 09:47:13 +0100 |
| commit | 07ce870bed2f631ad53a2c1a90db20b5f8126ab9 (patch) | |
| tree | 768a2c0590a6e2a722543826cdeacf1f1115f439 /drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | |
| parent | e1000e: cleanup checkpatch braces checks (diff) | |
| download | linux-07ce870bed2f631ad53a2c1a90db20b5f8126ab9.tar.xz linux-07ce870bed2f631ad53a2c1a90db20b5f8126ab9.zip | |
ixgbe: allow reading of SFF-8472 data over i2c
This patch adds functions needed for reading SFF-8472 diagnostic data
from SFP modules.
Based on original patch from Aurélien Guillaume <footplus@gmail.com>
CC: Aurélien Guillaume <footplus@gmail.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 51b0a91f62bc..bbfe55c1054a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -30,6 +30,7 @@ #include "ixgbe_type.h" #define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0 +#define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2 /* EEPROM byte offsets */ #define IXGBE_SFF_IDENTIFIER 0x0 @@ -41,6 +42,8 @@ #define IXGBE_SFF_10GBE_COMP_CODES 0x3 #define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 #define IXGBE_SFF_CABLE_SPEC_COMP 0x3C +#define IXGBE_SFF_SFF_8472_SWAP 0x5C +#define IXGBE_SFF_SFF_8472_COMP 0x5E /* Bitmasks */ #define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 @@ -51,6 +54,7 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_ADDRESSING_MODE 0x4 #define IXGBE_I2C_EEPROM_READ_MASK 0x100 #define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 #define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 @@ -88,6 +92,9 @@ #define IXGBE_TN_LASI_STATUS_REG 0x9005 #define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 +/* SFP+ SFF-8472 Compliance code */ +#define IXGBE_SFF_SFF_8472_UNSUP 0x00 + s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); @@ -125,6 +132,8 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data); s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); +s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data); s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data); #endif /* _IXGBE_PHY_H_ */ |