ath9k_hw: clean up duplicate and unnused eeprom related defines

AR*_MAX_RATE_POWER => MAX_RATE_POWER
AR*_EEPROM_MODAL_SPURS => AR_EEPROM_MODAL_SPURS
AR*_OPFLAGS_* => AR5416_OPFLAGS_*
...

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 1 insertions, 36 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 33503217dab3..620821ea6927 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -20,48 +20,17 @@
 /* #define AR9300_NUM_CTLS              21 */
 #define AR9300_NUM_CTLS_5G           9
 #define AR9300_NUM_CTLS_2G           12
-#define AR9300_CTL_MODE_M            0xF
 #define AR9300_NUM_BAND_EDGES_5G     8
 #define AR9300_NUM_BAND_EDGES_2G     4
-#define AR9300_NUM_PD_GAINS          4
-#define AR9300_PD_GAINS_IN_MASK      4
-#define AR9300_PD_GAIN_ICEPTS        5
-#define AR9300_EEPROM_MODAL_SPURS    5
-#define AR9300_MAX_RATE_POWER        63
-#define AR9300_NUM_PDADC_VALUES      128
-#define AR9300_NUM_RATES             16
-#define AR9300_BCHAN_UNUSED          0xFF
-#define AR9300_MAX_PWR_RANGE_IN_HALF_DB 64
-#define AR9300_OPFLAGS_11A           0x01
-#define AR9300_OPFLAGS_11G           0x02
-#define AR9300_OPFLAGS_5G_HT40       0x04
-#define AR9300_OPFLAGS_2G_HT40       0x08
-#define AR9300_OPFLAGS_5G_HT20       0x10
-#define AR9300_OPFLAGS_2G_HT20       0x20
 #define AR9300_EEPMISC_BIG_ENDIAN    0x01
 #define AR9300_EEPMISC_WOW           0x02
 #define AR9300_CUSTOMER_DATA_SIZE    20
 
-#define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5))
 #define FBIN2FREQ(x, y) ((y) ? (2300 + x) : (4800 + 5 * x))
 #define AR9300_MAX_CHAINS            3
 #define AR9300_ANT_16S               25
 #define AR9300_FUTURE_MODAL_SZ       6
 
-#define AR9300_NUM_ANT_CHAIN_FIELDS     7
-#define AR9300_NUM_ANT_COMMON_FIELDS    4
-#define AR9300_SIZE_ANT_CHAIN_FIELD     3
-#define AR9300_SIZE_ANT_COMMON_FIELD    4
-#define AR9300_ANT_CHAIN_MASK           0x7
-#define AR9300_ANT_COMMON_MASK          0xf
-#define AR9300_CHAIN_0_IDX              0
-#define AR9300_CHAIN_1_IDX              1
-#define AR9300_CHAIN_2_IDX              2
-
-#define AR928X_NUM_ANT_CHAIN_FIELDS     6
-#define AR928X_SIZE_ANT_CHAIN_FIELD     2
-#define AR928X_ANT_CHAIN_MASK           0x3
-
 /* Delta from which to start power to pdadc table */
 /* This offset is used in both open loop and closed loop power control
  * schemes. In open loop power control, it is not really needed, but for
@@ -71,12 +40,8 @@
  */
 #define AR9300_PWR_TABLE_OFFSET  0
 
-/* enable flags for voltage and temp compensation */
-#define ENABLE_TEMP_COMPENSATION 0x01
-#define ENABLE_VOLT_COMPENSATION 0x02
 /* byte addressable */
 #define AR9300_EEPROM_SIZE (16*1024)
-#define FIXED_CCA_THRESHOLD 15
 
 #define AR9300_BASE_ADDR_4K 0xfff
 #define AR9300_BASE_ADDR 0x3ff
@@ -226,7 +191,7 @@ struct ar9300_modal_eep_header {
 	int8_t tempSlope;
 	int8_t voltSlope;
 	/* spur channels in usual fbin coding format */
-	u8 spurChans[AR9300_EEPROM_MODAL_SPURS];
+	u8 spurChans[AR_EEPROM_MODAL_SPURS];
 	/* 3  Check if the register is per chain */
 	int8_t noiseFloorThreshCh[AR9300_MAX_CHAINS];
 	u8 ob[AR9300_MAX_CHAINS];