wil6210: add advanced interrupt moderation

Add advanced interrupt moderation support available since "Sparrow B0".
Legacy interrupt moderation used only one counter to moderate tx, rx,
and misc interrupts.
Advanced interrupt moderation bypasses misc, and handles separately tx
and rx interrupts. In addition it has two timers for each interrupt type.
Max burst duration timer which defines how long to postpone interrupt after
first event (receive event for rx and tx complete event for tx), and
interframe timeout which defines how to determine the end of the burst and
issue interrupt even if the first timer still pending.
Capabilities flags in wil_priv is set on initialization according to
HW. The rest of the code checks for advanced interrupt capability bit
in capabilities flags field.
Debugfs is split accordingly: "legacy" interrupt moderation remains
unchanged, new debugs files added for advanced interrupt moderation
support.
Module params are aligned to support advanced interrupt moderation
(tx & rx). When not available (for legacy interrupt moderation) will
use only rx configuration; Tx configuration will be ignored in this
case.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 79 insertions, 3 deletions

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 384bb3171c45..a6f923086f31 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -157,15 +157,91 @@ void wil_unmask_irq(struct wil6210_priv *wil)
 	iowrite32(WIL_ICR_ICC_VALUE, wil->csr + HOSTADDR(RGF_DMA_EP_MISC_ICR) +
 		  offsetof(struct RGF_ICR, ICC));
 
-	/* interrupt moderation parameters */
-	wil_set_itr_trsh(wil);
-
 	wil6210_unmask_irq_pseudo(wil);
 	wil6210_unmask_irq_tx(wil);
 	wil6210_unmask_irq_rx(wil);
 	wil6210_unmask_irq_misc(wil);
 }
 
+/* target write operation */
+#define W(a, v) do { iowrite32(v, wil->csr + HOSTADDR(a)); wmb(); } while (0)
+
+static
+void wil_configure_interrupt_moderation_new(struct wil6210_priv *wil)
+{
+	/* Disable and clear tx counter before (re)configuration */
+	W(RGF_DMA_ITR_TX_CNT_CTL, BIT_DMA_ITR_TX_CNT_CTL_CLR);
+	W(RGF_DMA_ITR_TX_CNT_TRSH, wil->tx_max_burst_duration);
+	wil_info(wil, "set ITR_TX_CNT_TRSH = %d usec\n",
+		 wil->tx_max_burst_duration);
+	/* Configure TX max burst duration timer to use usec units */
+	W(RGF_DMA_ITR_TX_CNT_CTL,
+	  BIT_DMA_ITR_TX_CNT_CTL_EN | BIT_DMA_ITR_TX_CNT_CTL_EXT_TIC_SEL);
+
+	/* Disable and clear tx idle counter before (re)configuration */
+	W(RGF_DMA_ITR_TX_IDL_CNT_CTL, BIT_DMA_ITR_TX_IDL_CNT_CTL_CLR);
+	W(RGF_DMA_ITR_TX_IDL_CNT_TRSH, wil->tx_interframe_timeout);
+	wil_info(wil, "set ITR_TX_IDL_CNT_TRSH = %d usec\n",
+		 wil->tx_interframe_timeout);
+	/* Configure TX max burst duration timer to use usec units */
+	W(RGF_DMA_ITR_TX_IDL_CNT_CTL, BIT_DMA_ITR_TX_IDL_CNT_CTL_EN |
+				      BIT_DMA_ITR_TX_IDL_CNT_CTL_EXT_TIC_SEL);
+
+	/* Disable and clear rx counter before (re)configuration */
+	W(RGF_DMA_ITR_RX_CNT_CTL, BIT_DMA_ITR_RX_CNT_CTL_CLR);
+	W(RGF_DMA_ITR_RX_CNT_TRSH, wil->rx_max_burst_duration);
+	wil_info(wil, "set ITR_RX_CNT_TRSH = %d usec\n",
+		 wil->rx_max_burst_duration);
+	/* Configure TX max burst duration timer to use usec units */
+	W(RGF_DMA_ITR_RX_CNT_CTL,
+	  BIT_DMA_ITR_RX_CNT_CTL_EN | BIT_DMA_ITR_RX_CNT_CTL_EXT_TIC_SEL);
+
+	/* Disable and clear rx idle counter before (re)configuration */
+	W(RGF_DMA_ITR_RX_IDL_CNT_CTL, BIT_DMA_ITR_RX_IDL_CNT_CTL_CLR);
+	W(RGF_DMA_ITR_RX_IDL_CNT_TRSH, wil->rx_interframe_timeout);
+	wil_info(wil, "set ITR_RX_IDL_CNT_TRSH = %d usec\n",
+		 wil->rx_interframe_timeout);
+	/* Configure TX max burst duration timer to use usec units */
+	W(RGF_DMA_ITR_RX_IDL_CNT_CTL, BIT_DMA_ITR_RX_IDL_CNT_CTL_EN |
+				      BIT_DMA_ITR_RX_IDL_CNT_CTL_EXT_TIC_SEL);
+}
+
+static
+void wil_configure_interrupt_moderation_lgc(struct wil6210_priv *wil)
+{
+	/* disable, use usec resolution */
+	W(RGF_DMA_ITR_CNT_CRL, BIT_DMA_ITR_CNT_CRL_CLR);
+
+	wil_info(wil, "set ITR_TRSH = %d usec\n", wil->rx_max_burst_duration);
+	W(RGF_DMA_ITR_CNT_TRSH, wil->rx_max_burst_duration);
+	/* start it */
+	W(RGF_DMA_ITR_CNT_CRL,
+	  BIT_DMA_ITR_CNT_CRL_EN | BIT_DMA_ITR_CNT_CRL_EXT_TICK);
+}
+
+#undef W
+
+void wil_configure_interrupt_moderation(struct wil6210_priv *wil)
+{
+	wil_dbg_irq(wil, "%s()\n", __func__);
+
+	/* disable interrupt moderation for monitor
+	 * to get better timestamp precision
+	 */
+	if (wil->wdev->iftype == NL80211_IFTYPE_MONITOR)
+		return;
+
+	if (test_bit(hw_capability_advanced_itr_moderation,
+		     wil->hw_capabilities))
+		wil_configure_interrupt_moderation_new(wil);
+	else {
+		/* Advanced interrupt moderation is not available before
+		 * Sparrow v2. Will use legacy interrupt moderation
+		 */
+		wil_configure_interrupt_moderation_lgc(wil);
+	}
+}
+
 static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;