brcmfmac: Unify methods to define and map firmware files.

All bus drivers (sdio, usb and pcie) require firmware files which
needs to be downloaded to the device, The definitions and mapping
of device id and revision to firmware and nvram file is done by
each bus driver. This patch creates common functions and defines
to simplify and unify the definition of these firmware and nvram
files and mapping.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 42 insertions, 2 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index 33afb9aafa9b..1e4d5f663036 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -28,9 +28,9 @@
 #define BRCMF_FW_NVRAM_DEVPATH_LEN		19	/* devpath0=pcie/1/4/ */
 #define BRCMF_FW_NVRAM_PCIEDEV_LEN		10	/* pcie/1/4/ + \0 */
 
-char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
+static char brcmf_firmware_path[BRCMF_FW_NAME_LEN];
 module_param_string(alternative_fw_path, brcmf_firmware_path,
-		    BRCMF_FW_PATH_LEN, 0440);
+		    BRCMF_FW_NAME_LEN, 0440);
 
 enum nvram_parser_state {
 	IDLE,
@@ -539,3 +539,43 @@ int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
 					   0);
 }
 
+int brcmf_fw_map_chip_to_name(u32 chip, u32 chiprev,
+			      struct brcmf_firmware_mapping mapping_table[],
+			      u32 table_size, char fw_name[BRCMF_FW_NAME_LEN],
+			      char nvram_name[BRCMF_FW_NAME_LEN])
+{
+	u32 i;
+	char end;
+
+	for (i = 0; i < table_size; i++) {
+		if (mapping_table[i].chipid == chip &&
+		    mapping_table[i].revmask & BIT(chiprev))
+			break;
+	}
+
+	if (i == table_size) {
+		brcmf_err("Unknown chipid %d [%d]\n", chip, chiprev);
+		return -ENODEV;
+	}
+
+	/* check if firmware path is provided by module parameter */
+	if (brcmf_firmware_path[0] != '\0') {
+		strlcpy(fw_name, brcmf_firmware_path, BRCMF_FW_NAME_LEN);
+		if ((nvram_name) && (mapping_table[i].nvram))
+			strlcpy(nvram_name, brcmf_firmware_path,
+				BRCMF_FW_NAME_LEN);
+
+		end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1];
+		if (end != '/') {
+			strlcat(fw_name, "/", BRCMF_FW_NAME_LEN);
+			if ((nvram_name) && (mapping_table[i].nvram))
+				strlcat(nvram_name, "/", BRCMF_FW_NAME_LEN);
+		}
+	}
+	strlcat(fw_name, mapping_table[i].fw, BRCMF_FW_NAME_LEN);
+	if ((nvram_name) && (mapping_table[i].nvram))
+		strlcat(nvram_name, mapping_table[i].nvram, BRCMF_FW_NAME_LEN);
+
+	return 0;
+}
+