diff options
author | Jim Quinlan <jim2101024@gmail.com> | 2021-12-09 21:47:25 +0100 |
---|---|---|
committer | Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 2022-01-11 11:55:41 +0100 |
commit | aa8589aac8e335e5e2e9a9de72a53913892e92f9 (patch) | |
tree | 560612b0334115ade06c0c4b592d0b9c8a6f656b /drivers/pci/controller/pcie-brcmstb.c | |
parent | MIPS: bmips: Remove obsolete DMA mapping support (diff) | |
download | linux-aa8589aac8e335e5e2e9a9de72a53913892e92f9.tar.xz linux-aa8589aac8e335e5e2e9a9de72a53913892e92f9.zip |
PCI: brcmstb: Augment driver for MIPs SOCs
The current brcmstb driver works for Arm and Arm64. A few things are
modified here for us to support MIPs as well.
o There are four outbound range register groups and each directs a window
of up to 128MB. Even though there are four 128MB DT "ranges" in the
bmips PCIe DT node, these ranges are contiguous and are collapsed into
a single range by the OF range parser. Now the driver assumes a single
range -- for MIPs only -- and splits it back into 128MB sizes.
o For bcm7425, the config space accesses must be 32-bit reads or
writes. In addition, the 4k config space register array is missing
and not used.
o The registers for the upper 32-bits of the outbound window address do
not exist.
o Burst size must be set to 256 (this refers to an internal bus).
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Diffstat (limited to 'drivers/pci/controller/pcie-brcmstb.c')
-rw-r--r-- | drivers/pci/controller/pcie-brcmstb.c | 82 |
1 files changed, 78 insertions, 4 deletions
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 1fc7bd49a7ad..a267cd5b3233 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -118,6 +118,7 @@ #define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204 #define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2 #define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000 +#define PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x00800000 #define PCIE_INTR2_CPU_BASE 0x4300 @@ -205,6 +206,8 @@ enum { enum pcie_type { GENERIC, + BCM7425, + BCM7435, BCM4908, BCM7278, BCM2711, @@ -223,6 +226,12 @@ static const int pcie_offsets[] = { [EXT_CFG_DATA] = 0x9004, }; +static const int pcie_offsets_bmips_7425[] = { + [RGR1_SW_INIT_1] = 0x8010, + [EXT_CFG_INDEX] = 0x8300, + [EXT_CFG_DATA] = 0x8304, +}; + static const struct pcie_cfg_data generic_cfg = { .offsets = pcie_offsets, .type = GENERIC, @@ -230,6 +239,20 @@ static const struct pcie_cfg_data generic_cfg = { .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, }; +static const struct pcie_cfg_data bcm7425_cfg = { + .offsets = pcie_offsets_bmips_7425, + .type = BCM7425, + .perst_set = brcm_pcie_perst_set_generic, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, +}; + +static const struct pcie_cfg_data bcm7435_cfg = { + .offsets = pcie_offsets, + .type = BCM7435, + .perst_set = brcm_pcie_perst_set_generic, + .bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic, +}; + static const struct pcie_cfg_data bcm4908_cfg = { .offsets = pcie_offsets, .type = BCM4908, @@ -297,6 +320,11 @@ struct brcm_pcie { void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val); }; +static inline bool is_bmips(const struct brcm_pcie *pcie) +{ + return pcie->type == BCM7435 || pcie->type == BCM7425; +} + /* * This is to convert the size of the inbound "BAR" region to the * non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE @@ -443,6 +471,9 @@ static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie, PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK); writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win)); + if (is_bmips(pcie)) + return; + /* Write the cpu & limit addr upper bits */ high_addr_shift = HWEIGHT32(PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK); @@ -718,12 +749,35 @@ static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn, return base + PCIE_EXT_CFG_DATA + where; } +static void __iomem *brcm_pcie_map_conf32(struct pci_bus *bus, unsigned int devfn, + int where) +{ + struct brcm_pcie *pcie = bus->sysdata; + void __iomem *base = pcie->base; + int idx; + + /* Accesses to the RC go right to the RC registers if slot==0 */ + if (pci_is_root_bus(bus)) + return PCI_SLOT(devfn) ? NULL : base + (where & ~0x3); + + /* For devices, write to the config space index register */ + idx = PCIE_ECAM_OFFSET(bus->number, devfn, (where & ~3)); + writel(idx, base + IDX_ADDR(pcie)); + return base + DATA_ADDR(pcie); +} + static struct pci_ops brcm_pcie_ops = { .map_bus = brcm_pcie_map_conf, .read = pci_generic_config_read, .write = pci_generic_config_write, }; +static struct pci_ops brcm_pcie_ops32 = { + .map_bus = brcm_pcie_map_conf32, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, +}; + static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val) { u32 tmp, mask = RGR1_SW_INIT_1_INIT_GENERIC_MASK; @@ -883,7 +937,10 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) pcie->bridge_sw_init_set(pcie, 0); tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); - tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; + if (is_bmips(pcie)) + tmp &= ~PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; + else + tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK; writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG); /* Wait for SerDes to be stable */ usleep_range(100, 200); @@ -893,8 +950,10 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) * is encoded as 0=128, 1=256, 2=512, 3=Rsvd, for BCM7278 it * is encoded as 0=Rsvd, 1=128, 2=256, 3=512. */ - if (pcie->type == BCM2711) - burst = 0x0; /* 128B */ + if (is_bmips(pcie)) + burst = 0x1; /* 256 bytes */ + else if (pcie->type == BCM2711) + burst = 0x0; /* 128 bytes */ else if (pcie->type == BCM7278) burst = 0x3; /* 512 bytes */ else @@ -988,6 +1047,19 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) return -EINVAL; } + if (is_bmips(pcie)) { + u64 start = res->start; + unsigned int j, nwins = resource_size(res) / SZ_128M; + + /* bmips PCIe outbound windows have a 128MB max size */ + if (nwins > BRCM_NUM_PCIE_OUT_WINS) + nwins = BRCM_NUM_PCIE_OUT_WINS; + for (j = 0; j < nwins; j++, start += SZ_128M) + brcm_pcie_set_outbound_win(pcie, j, start, + start - entry->offset, + SZ_128M); + break; + } brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start, res->start - entry->offset, resource_size(res)); @@ -1226,6 +1298,8 @@ static const struct of_device_id brcm_pcie_match[] = { { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg }, { .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg }, { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg }, + { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg }, + { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg }, {}, }; @@ -1315,7 +1389,7 @@ static int brcm_pcie_probe(struct platform_device *pdev) } } - bridge->ops = &brcm_pcie_ops; + bridge->ops = pcie->type == BCM7425 ? &brcm_pcie_ops32 : &brcm_pcie_ops; bridge->sysdata = pcie; platform_set_drvdata(pdev, pcie); |