summaryrefslogtreecommitdiffstats
path: root/drivers/pcmcia/ricoh.h
diff options
context:
space:
mode:
authorMaciej S. Szmigiero <mail@maciej.szmigiero.name>2018-09-09 01:21:06 +0200
committerDominik Brodowski <linux@dominikbrodowski.net>2018-10-01 12:17:03 +0200
commit95691e3eddc41da2d1cd3cca51fecdfb46bd85bc (patch)
tree10e1b6e6859bac30cfc30c52d56dfe0667e93656 /drivers/pcmcia/ricoh.h
parentpcmcia: pcmcia_resource: Replace mdelay() with msleep() (diff)
downloadlinux-95691e3eddc41da2d1cd3cca51fecdfb46bd85bc.tar.xz
linux-95691e3eddc41da2d1cd3cca51fecdfb46bd85bc.zip
pcmcia: Implement CLKRUN protocol disabling for Ricoh bridges
Currently, "disable_clkrun" yenta_socket module parameter is only implemented for TI CardBus bridges. Add also an implementation for Ricoh bridges that have the necessary setting documented in publicly available datasheets. Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work correctly unless the CLKRUN protocol is disabled. Let's also make it clear in its description that the "disable_clkrun" module parameter only works on these two previously mentioned brands of CardBus bridges. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Cc: stable@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/pcmcia/ricoh.h')
-rw-r--r--drivers/pcmcia/ricoh.h35
1 files changed, 35 insertions, 0 deletions
diff --git a/drivers/pcmcia/ricoh.h b/drivers/pcmcia/ricoh.h
index 01098c841f87..8ac7b138c094 100644
--- a/drivers/pcmcia/ricoh.h
+++ b/drivers/pcmcia/ricoh.h
@@ -119,6 +119,10 @@
#define RL5C4XX_MISC_CONTROL 0x2F /* 8 bit */
#define RL5C4XX_ZV_ENABLE 0x08
+/* Misc Control 3 Register */
+#define RL5C4XX_MISC3 0x00A2 /* 16 bit */
+#define RL5C47X_MISC3_CB_CLKRUN_DIS BIT(1)
+
#ifdef __YENTA_H
#define rl_misc(socket) ((socket)->private[0])
@@ -156,6 +160,35 @@ static void ricoh_set_zv(struct yenta_socket *socket)
}
}
+static void ricoh_set_clkrun(struct yenta_socket *socket, bool quiet)
+{
+ u16 misc3;
+
+ /*
+ * RL5C475II likely has this setting, too, however no datasheet
+ * is publicly available for this chip
+ */
+ if (socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C476 &&
+ socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C478)
+ return;
+
+ if (socket->dev->revision < 0x80)
+ return;
+
+ misc3 = config_readw(socket, RL5C4XX_MISC3);
+ if (misc3 & RL5C47X_MISC3_CB_CLKRUN_DIS) {
+ if (!quiet)
+ dev_dbg(&socket->dev->dev,
+ "CLKRUN feature already disabled\n");
+ } else if (disable_clkrun) {
+ if (!quiet)
+ dev_info(&socket->dev->dev,
+ "Disabling CLKRUN feature\n");
+ misc3 |= RL5C47X_MISC3_CB_CLKRUN_DIS;
+ config_writew(socket, RL5C4XX_MISC3, misc3);
+ }
+}
+
static void ricoh_save_state(struct yenta_socket *socket)
{
rl_misc(socket) = config_readw(socket, RL5C4XX_MISC);
@@ -172,6 +205,7 @@ static void ricoh_restore_state(struct yenta_socket *socket)
config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket));
config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket));
config_writew(socket, RL5C4XX_CONFIG, rl_config(socket));
+ ricoh_set_clkrun(socket, true);
}
@@ -197,6 +231,7 @@ static int ricoh_override(struct yenta_socket *socket)
config_writew(socket, RL5C4XX_CONFIG, config);
ricoh_set_zv(socket);
+ ricoh_set_clkrun(socket, false);
return 0;
}