[SCSI] qla4xxx: Added support for Diagnostics MBOX command

Added support for Diagnostics MBOX command via BSG Vendor HST_VENDOR
interface.  This command provides various tests for validating hardware
functionality.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 files changed, 455 insertions, 7 deletions

diff --git a/drivers/scsi/qla4xxx/ql4_bsg.c b/drivers/scsi/qla4xxx/ql4_bsg.c
index cf8fdf1d1257..04a0027dbca0 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.c
+++ b/drivers/scsi/qla4xxx/ql4_bsg.c
@@ -446,6 +446,363 @@ leave:
 	return rval;
 }
 
+static void ql4xxx_execute_diag_cmd(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	uint8_t *rsp_ptr = NULL;
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int status = QLA_ERROR;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
+		ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n",
+			   __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		goto exit_diag_mem_test;
+	}
+
+	bsg_reply->reply_payload_rcv_len = 0;
+	memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1],
+	       sizeof(uint32_t) * MBOX_REG_COUNT);
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n",
+			  __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2],
+			  mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6],
+			  mbox_cmd[7]));
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0],
+					 &mbox_sts[0]);
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n",
+			  __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2],
+			  mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6],
+			  mbox_sts[7]));
+
+	if (status == QLA_SUCCESS)
+		bsg_reply->result = DID_OK << 16;
+	else
+		bsg_reply->result = DID_ERROR << 16;
+
+	/* Send mbox_sts to application */
+	bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts);
+	rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply);
+	memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts));
+
+exit_diag_mem_test:
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: bsg_reply->result = x%x, status = %s\n",
+			  __func__, bsg_reply->result, STATUS(status)));
+
+	bsg_job_done(bsg_job, bsg_reply->result,
+		     bsg_reply->reply_payload_rcv_len);
+}
+
+static int qla4_83xx_wait_for_loopback_config_comp(struct scsi_qla_host *ha,
+						   int wait_for_link)
+{
+	int status = QLA_SUCCESS;
+
+	if (!wait_for_completion_timeout(&ha->idc_comp, (IDC_COMP_TOV * HZ))) {
+		ql4_printk(KERN_INFO, ha, "%s: IDC Complete notification not received, Waiting for another %d timeout",
+			   __func__, ha->idc_extend_tmo);
+		if (ha->idc_extend_tmo) {
+			if (!wait_for_completion_timeout(&ha->idc_comp,
+						(ha->idc_extend_tmo * HZ))) {
+				ha->notify_idc_comp = 0;
+				ha->notify_link_up_comp = 0;
+				ql4_printk(KERN_WARNING, ha, "%s: IDC Complete notification not received",
+					   __func__);
+				status = QLA_ERROR;
+				goto exit_wait;
+			} else {
+				DEBUG2(ql4_printk(KERN_INFO, ha,
+						  "%s: IDC Complete notification received\n",
+						  __func__));
+			}
+		}
+	} else {
+		DEBUG2(ql4_printk(KERN_INFO, ha,
+				  "%s: IDC Complete notification received\n",
+				  __func__));
+	}
+	ha->notify_idc_comp = 0;
+
+	if (wait_for_link) {
+		if (!wait_for_completion_timeout(&ha->link_up_comp,
+						 (IDC_COMP_TOV * HZ))) {
+			ha->notify_link_up_comp = 0;
+			ql4_printk(KERN_WARNING, ha, "%s: LINK UP notification not received",
+				   __func__);
+			status = QLA_ERROR;
+			goto exit_wait;
+		} else {
+			DEBUG2(ql4_printk(KERN_INFO, ha,
+					  "%s: LINK UP notification received\n",
+					  __func__));
+		}
+		ha->notify_link_up_comp = 0;
+	}
+
+exit_wait:
+	return status;
+}
+
+static int qla4_83xx_pre_loopback_config(struct scsi_qla_host *ha,
+					 uint32_t *mbox_cmd)
+{
+	uint32_t config = 0;
+	int status = QLA_SUCCESS;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	status = qla4_83xx_get_port_config(ha, &config);
+	if (status != QLA_SUCCESS)
+		goto exit_pre_loopback_config;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Default port config=%08X\n",
+			  __func__, config));
+
+	if ((config & ENABLE_INTERNAL_LOOPBACK) ||
+	    (config & ENABLE_EXTERNAL_LOOPBACK)) {
+		ql4_printk(KERN_INFO, ha, "%s: Loopback diagnostics already in progress. Invalid requiest\n",
+			   __func__);
+		goto exit_pre_loopback_config;
+	}
+
+	if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK)
+		config |= ENABLE_INTERNAL_LOOPBACK;
+
+	if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK)
+		config |= ENABLE_EXTERNAL_LOOPBACK;
+
+	config &= ~ENABLE_DCBX;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: New port config=%08X\n",
+			  __func__, config));
+
+	ha->notify_idc_comp = 1;
+	ha->notify_link_up_comp = 1;
+
+	/* get the link state */
+	qla4xxx_get_firmware_state(ha);
+
+	status = qla4_83xx_set_port_config(ha, &config);
+	if (status != QLA_SUCCESS) {
+		ha->notify_idc_comp = 0;
+		ha->notify_link_up_comp = 0;
+		goto exit_pre_loopback_config;
+	}
+exit_pre_loopback_config:
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__,
+			  STATUS(status)));
+	return status;
+}
+
+static int qla4_83xx_post_loopback_config(struct scsi_qla_host *ha,
+					  uint32_t *mbox_cmd)
+{
+	int status = QLA_SUCCESS;
+	uint32_t config = 0;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	status = qla4_83xx_get_port_config(ha, &config);
+	if (status != QLA_SUCCESS)
+		goto exit_post_loopback_config;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: port config=%08X\n", __func__,
+			  config));
+
+	if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK)
+		config &= ~ENABLE_INTERNAL_LOOPBACK;
+	else if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK)
+		config &= ~ENABLE_EXTERNAL_LOOPBACK;
+
+	config |= ENABLE_DCBX;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: Restore default port config=%08X\n", __func__,
+			  config));
+
+	ha->notify_idc_comp = 1;
+	if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP)
+		ha->notify_link_up_comp = 1;
+
+	status = qla4_83xx_set_port_config(ha, &config);
+	if (status != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "%s: Scheduling adapter reset\n",
+			   __func__);
+		set_bit(DPC_RESET_HA, &ha->dpc_flags);
+		clear_bit(AF_LOOPBACK, &ha->flags);
+		goto exit_post_loopback_config;
+	}
+
+exit_post_loopback_config:
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__,
+			  STATUS(status)));
+	return status;
+}
+
+static void qla4xxx_execute_diag_loopback_cmd(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	struct iscsi_bsg_reply *bsg_reply = bsg_job->reply;
+	uint8_t *rsp_ptr = NULL;
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int wait_for_link = 1;
+	int status = QLA_ERROR;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	bsg_reply->reply_payload_rcv_len = 0;
+
+	if (test_bit(AF_LOOPBACK, &ha->flags)) {
+		ql4_printk(KERN_INFO, ha, "%s: Loopback Diagnostics already in progress. Invalid Request\n",
+			   __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		goto exit_loopback_cmd;
+	}
+
+	if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
+		ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n",
+			   __func__);
+		bsg_reply->result = DID_ERROR << 16;
+		goto exit_loopback_cmd;
+	}
+
+	memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1],
+	       sizeof(uint32_t) * MBOX_REG_COUNT);
+
+	if (is_qla8032(ha) || is_qla8042(ha)) {
+		status = qla4_83xx_pre_loopback_config(ha, mbox_cmd);
+		if (status != QLA_SUCCESS) {
+			bsg_reply->result = DID_ERROR << 16;
+			goto exit_loopback_cmd;
+		}
+
+		status = qla4_83xx_wait_for_loopback_config_comp(ha,
+								 wait_for_link);
+		if (status != QLA_SUCCESS) {
+			bsg_reply->result = DID_TIME_OUT << 16;
+			goto restore;
+		}
+	}
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n",
+			  __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2],
+			  mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6],
+			  mbox_cmd[7]));
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0],
+				&mbox_sts[0]);
+
+	if (status == QLA_SUCCESS)
+		bsg_reply->result = DID_OK << 16;
+	else
+		bsg_reply->result = DID_ERROR << 16;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n",
+			  __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2],
+			  mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6],
+			  mbox_sts[7]));
+
+	/* Send mbox_sts to application */
+	bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts);
+	rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply);
+	memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts));
+restore:
+	if (is_qla8032(ha) || is_qla8042(ha)) {
+		status = qla4_83xx_post_loopback_config(ha, mbox_cmd);
+		if (status != QLA_SUCCESS) {
+			bsg_reply->result = DID_ERROR << 16;
+			goto exit_loopback_cmd;
+		}
+
+		/* for pre_loopback_config() wait for LINK UP only
+		 * if PHY LINK is UP */
+		if (!(ha->addl_fw_state & FW_ADDSTATE_LINK_UP))
+			wait_for_link = 0;
+
+		status = qla4_83xx_wait_for_loopback_config_comp(ha,
+								 wait_for_link);
+		if (status != QLA_SUCCESS) {
+			bsg_reply->result = DID_TIME_OUT << 16;
+			goto exit_loopback_cmd;
+		}
+	}
+exit_loopback_cmd:
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "%s: bsg_reply->result = x%x, status = %s\n",
+			  __func__, bsg_reply->result, STATUS(status)));
+	bsg_job_done(bsg_job, bsg_reply->result,
+		     bsg_reply->reply_payload_rcv_len);
+}
+
+static int qla4xxx_execute_diag_test(struct bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = iscsi_job_to_shost(bsg_job);
+	struct scsi_qla_host *ha = to_qla_host(host);
+	struct iscsi_bsg_request *bsg_req = bsg_job->request;
+	uint32_t diag_cmd;
+	int rval = -EINVAL;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__));
+
+	diag_cmd = bsg_req->rqst_data.h_vendor.vendor_cmd[1];
+	if (diag_cmd == MBOX_CMD_DIAG_TEST) {
+		switch (bsg_req->rqst_data.h_vendor.vendor_cmd[2]) {
+		case QL_DIAG_CMD_TEST_DDR_SIZE:
+		case QL_DIAG_CMD_TEST_DDR_RW:
+		case QL_DIAG_CMD_TEST_ONCHIP_MEM_RW:
+		case QL_DIAG_CMD_TEST_NVRAM:
+		case QL_DIAG_CMD_TEST_FLASH_ROM:
+		case QL_DIAG_CMD_TEST_DMA_XFER:
+		case QL_DIAG_CMD_SELF_DDR_RW:
+		case QL_DIAG_CMD_SELF_ONCHIP_MEM_RW:
+			/* Execute diag test for adapter RAM/FLASH */
+			ql4xxx_execute_diag_cmd(bsg_job);
+			/* Always return success as we want to sent bsg_reply
+			 * to Application */
+			rval = QLA_SUCCESS;
+			break;
+
+		case QL_DIAG_CMD_TEST_INT_LOOPBACK:
+		case QL_DIAG_CMD_TEST_EXT_LOOPBACK:
+			/* Execute diag test for Network */
+			qla4xxx_execute_diag_loopback_cmd(bsg_job);
+			/* Always return success as we want to sent bsg_reply
+			 * to Application */
+			rval = QLA_SUCCESS;
+			break;
+		default:
+			ql4_printk(KERN_ERR, ha, "%s: Invalid diag test: 0x%x\n",
+				   __func__,
+				   bsg_req->rqst_data.h_vendor.vendor_cmd[2]);
+		}
+	} else if ((diag_cmd == MBOX_CMD_SET_LED_CONFIG) ||
+		   (diag_cmd == MBOX_CMD_GET_LED_CONFIG)) {
+		ql4xxx_execute_diag_cmd(bsg_job);
+		rval = QLA_SUCCESS;
+	} else {
+		ql4_printk(KERN_ERR, ha, "%s: Invalid diag cmd: 0x%x\n",
+			   __func__, diag_cmd);
+	}
+
+	return rval;
+}
+
 /**
  * qla4xxx_process_vendor_specific - handle vendor specific bsg request
  * @job: iscsi_bsg_job to handle
@@ -479,6 +836,9 @@ int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job)
 	case QLISCSI_VND_GET_ACB:
 		return qla4xxx_bsg_get_acb(bsg_job);
 
+	case QLISCSI_VND_DIAG_TEST:
+		return qla4xxx_execute_diag_test(bsg_job);
+
 	default:
 		ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: "
 			   "0x%x\n", __func__, bsg_req->msgcode);
diff --git a/drivers/scsi/qla4xxx/ql4_bsg.h b/drivers/scsi/qla4xxx/ql4_bsg.h
index c6a0364509fd..88c2401910c0 100644
--- a/drivers/scsi/qla4xxx/ql4_bsg.h
+++ b/drivers/scsi/qla4xxx/ql4_bsg.h
@@ -15,5 +15,18 @@
 #define QLISCSI_VND_UPDATE_NVRAM	5
 #define QLISCSI_VND_RESTORE_DEFAULTS	6
 #define QLISCSI_VND_GET_ACB		7
+#define QLISCSI_VND_DIAG_TEST		8
+
+/* QLISCSI_VND_DIAG_CMD sub code */
+#define QL_DIAG_CMD_TEST_DDR_SIZE	0x2
+#define QL_DIAG_CMD_TEST_DDR_RW		0x3
+#define QL_DIAG_CMD_TEST_ONCHIP_MEM_RW	0x4
+#define QL_DIAG_CMD_TEST_NVRAM		0x5	/* Only ISP4XXX */
+#define QL_DIAG_CMD_TEST_FLASH_ROM	0x6
+#define QL_DIAG_CMD_TEST_INT_LOOPBACK	0x7
+#define QL_DIAG_CMD_TEST_EXT_LOOPBACK	0x8
+#define QL_DIAG_CMD_TEST_DMA_XFER	0x9	/* Only ISP4XXX */
+#define QL_DIAG_CMD_SELF_DDR_RW		0xC
+#define QL_DIAG_CMD_SELF_ONCHIP_MEM_RW	0xD
 
 #endif
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index e2be308c0d9e..aa67bb9a4426 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -73,6 +73,7 @@
 
 #define QLA_SUCCESS			0
 #define QLA_ERROR			1
+#define STATUS(status)		status == QLA_ERROR ? "FAILED" : "SUCCEEDED"
 
 /*
  * Data bit definitions
@@ -210,6 +211,8 @@
 #define MAX_RESET_HA_RETRIES		2
 #define FW_ALIVE_WAIT_TOV		3
 #define IDC_EXTEND_TOV			8
+#define IDC_COMP_TOV			5
+#define LINK_UP_COMP_TOV		30
 
 #define CMD_SP(Cmnd)			((Cmnd)->SCp.ptr)
 
@@ -822,6 +825,11 @@ struct scsi_qla_host {
 	uint32_t pf_bit;
 	struct qla4_83xx_idc_information idc_info;
 	struct addr_ctrl_blk *saved_acb;
+	int notify_idc_comp;
+	int notify_link_up_comp;
+	int idc_extend_tmo;
+	struct completion idc_comp;
+	struct completion link_up_comp;
 };
 
 struct ql4_task_data {
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 306065275707..fef311d9caa3 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -410,6 +410,7 @@ struct qla_flt_region {
 #define DDB_DS_LOGIN_IN_PROCESS			0x07
 #define MBOX_CMD_GET_FW_STATE			0x0069
 #define MBOX_CMD_GET_INIT_FW_CTRL_BLOCK_DEFAULTS 0x006A
+#define MBOX_CMD_DIAG_TEST			0x0075
 #define MBOX_CMD_GET_SYS_INFO			0x0078
 #define MBOX_CMD_GET_NVRAM			0x0078	/* For 40xx */
 #define MBOX_CMD_SET_NVRAM			0x0079	/* For 40xx */
@@ -425,8 +426,17 @@ struct qla_flt_region {
 #define MBOX_CMD_GET_IP_ADDR_STATE		0x0091
 #define MBOX_CMD_SEND_IPV6_ROUTER_SOL		0x0092
 #define MBOX_CMD_GET_DB_ENTRY_CURRENT_IP_ADDR	0x0093
+#define MBOX_CMD_SET_PORT_CONFIG		0x0122
+#define MBOX_CMD_GET_PORT_CONFIG		0x0123
+#define MBOX_CMD_SET_LED_CONFIG			0x0125
+#define MBOX_CMD_GET_LED_CONFIG			0x0126
 #define MBOX_CMD_MINIDUMP			0x0129
 
+/* Port Config */
+#define ENABLE_INTERNAL_LOOPBACK		0x04
+#define ENABLE_EXTERNAL_LOOPBACK		0x08
+#define ENABLE_DCBX				0x10
+
 /* Minidump subcommand */
 #define MINIDUMP_GET_SIZE_SUBCOMMAND		0x00
 #define MINIDUMP_GET_TMPLT_SUBCOMMAND		0x01
@@ -535,10 +545,6 @@ struct qla_flt_region {
 #define FLASH_OPT_COMMIT	2
 #define FLASH_OPT_RMW_COMMIT	3
 
-/* Loopback type */
-#define ENABLE_INTERNAL_LOOPBACK	0x04
-#define ENABLE_EXTERNAL_LOOPBACK	0x08
-
 /* generic defines to enable/disable params */
 #define QL4_PARAM_DISABLE	0
 #define QL4_PARAM_ENABLE	1
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index b8e87b33b48e..d67c50e0b896 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -277,6 +277,8 @@ int qla4_84xx_config_acb(struct scsi_qla_host *ha, int acb_config);
 int qla4_83xx_ms_mem_write_128b(struct scsi_qla_host *ha,
 				uint64_t addr, uint32_t *data, uint32_t count);
 uint8_t qla4xxx_set_ipaddr_state(uint8_t fw_ipaddr_state);
+int qla4_83xx_get_port_config(struct scsi_qla_host *ha, uint32_t *config);
+int qla4_83xx_set_port_config(struct scsi_qla_host *ha, uint32_t *config);
 
 extern int ql4xextended_error_logging;
 extern int ql4xdontresethba;
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 66cc9c1ba53c..a3c8bc7706c2 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -650,6 +650,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 	int i;
 	uint32_t mbox_sts[MBOX_AEN_REG_COUNT];
 	__le32 __iomem *mailbox_out;
+	uint32_t opcode = 0;
 
 	if (is_qla8032(ha) || is_qla8042(ha))
 		mailbox_out = &ha->qla4_83xx_reg->mailbox_out[0];
@@ -728,6 +729,11 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			qla4xxx_post_aen_work(ha, ISCSI_EVENT_LINKUP,
 					      sizeof(mbox_sts),
 					      (uint8_t *) mbox_sts);
+
+			if ((is_qla8032(ha) || is_qla8042(ha)) &&
+			    ha->notify_link_up_comp)
+				complete(&ha->link_up_comp);
+
 			break;
 
 		case MBOX_ASTS_LINK_DOWN:
@@ -873,8 +879,6 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			break;
 
 		case MBOX_ASTS_IDC_REQUEST_NOTIFICATION:
-		{
-			uint32_t opcode;
 			if (is_qla8032(ha) || is_qla8042(ha)) {
 				DEBUG2(ql4_printk(KERN_INFO, ha,
 						  "scsi%ld: AEN %04x, mbox_sts[1]=%08x, mbox_sts[2]=%08x, mbox_sts[3]=%08x, mbox_sts[4]=%08x\n",
@@ -894,7 +898,6 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 				}
 			}
 			break;
-		}
 
 		case MBOX_ASTS_IDC_COMPLETE:
 			if (is_qla8032(ha) || is_qla8042(ha)) {
@@ -907,6 +910,14 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 						  "scsi:%ld: AEN %04x IDC Complete notification\n",
 						  ha->host_no, mbox_sts[0]));
 
+				opcode = mbox_sts[1] >> 16;
+				if (ha->notify_idc_comp)
+					complete(&ha->idc_comp);
+
+				if ((opcode == MBOX_CMD_SET_PORT_CONFIG) ||
+				    (opcode == MBOX_CMD_PORT_RESET))
+					ha->idc_info.info2 = mbox_sts[3];
+
 				if (qla4_83xx_loopback_in_progress(ha)) {
 					set_bit(AF_LOOPBACK, &ha->flags);
 				} else {
@@ -939,6 +950,8 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			DEBUG2(ql4_printk(KERN_INFO, ha,
 					  "scsi%ld: AEN %04x Received IDC Extend Timeout notification\n",
 					  ha->host_no, mbox_sts[0]));
+			/* new IDC timeout */
+			ha->idc_extend_tmo = mbox_sts[1];
 			break;
 
 		case MBOX_ASTS_INITIALIZATION_FAILED:
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 351793c0e18f..9ae8ca3b69f9 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -2416,3 +2416,46 @@ exit_config_acb:
 			  rval == QLA_SUCCESS ? "SUCCEEDED" : "FAILED"));
 	return rval;
 }
+
+int qla4_83xx_get_port_config(struct scsi_qla_host *ha, uint32_t *config)
+{
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int status;
+
+	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+	memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+	mbox_cmd[0] = MBOX_CMD_GET_PORT_CONFIG;
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
+					 mbox_cmd, mbox_sts);
+	if (status == QLA_SUCCESS)
+		*config = mbox_sts[1];
+	else
+		ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__,
+			   mbox_sts[0]);
+
+	return status;
+}
+
+int qla4_83xx_set_port_config(struct scsi_qla_host *ha, uint32_t *config)
+{
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int status;
+
+	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+	memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+	mbox_cmd[0] = MBOX_CMD_SET_PORT_CONFIG;
+	mbox_cmd[1] = *config;
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT,
+				mbox_cmd, mbox_sts);
+	if (status != QLA_SUCCESS)
+		ql4_printk(KERN_ERR, ha, "%s: failed status %04X\n", __func__,
+			   mbox_sts[0]);
+
+	return status;
+}
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 4706b8c0ec64..1d86f5bbd1d0 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -8400,6 +8400,9 @@ static int qla4xxx_probe_adapter(struct pci_dev *pdev,
 	mutex_init(&ha->chap_sem);
 	init_completion(&ha->mbx_intr_comp);
 	init_completion(&ha->disable_acb_comp);
+	init_completion(&ha->idc_comp);
+	init_completion(&ha->link_up_comp);
+	init_completion(&ha->disable_acb_comp);
 
 	spin_lock_init(&ha->hardware_lock);
 	spin_lock_init(&ha->work_lock);