Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are updates for drivers that are tied to a particular SoC,
  including the correspondig device tree bindings:

   - A couple of reset controller changes for unisoc, uniphier, renesas
     and zte platforms

   - memory controller driver fixes for omap and tegra

   - Rockchip io domain driver updates

   - Lots of updates for qualcomm platforms, mostly touching their
     firmware and power management drivers

   - Tegra FUSE and firmware driver updateѕ

   - Support for virtio transports in the SCMI firmware framework

   - cleanup of ixp4xx drivers, towards enabling multiplatform support
     and bringing it up to date with modern platforms

   - Minor updates for keystone, mediatek, omap, renesas"

* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  reset: simple: remove ZTE details in Kconfig help
  soc: rockchip: io-domain: Remove unneeded semicolon
  soc: rockchip: io-domain: add rk3568 support
  dt-bindings: power: add rk3568-pmu-io-domain support
  bus: ixp4xx: return on error in ixp4xx_exp_probe()
  soc: renesas: Prefer memcpy() over strcpy()
  firmware: tegra: Stop using seq_get_buf()
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>
  dt-bindings: soc: ti: pruss: Add dma-coherent property
  soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
  dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
  firmware: arm_scmi: Use WARN_ON() to check configured transports
  firmware: arm_scmi: Fix boolconv.cocci warnings
  soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
  soc: mediatek: mmsys: add MT8365 support
  ...

1 files changed, 35 insertions, 6 deletions

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 8d8df51c5466..b2dd0a4d2446 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -77,6 +77,11 @@ struct spi_imx_devtype_data {
 	bool has_slavemode;
 	unsigned int fifo_size;
 	bool dynamic_burst;
+	/*
+	 * ERR009165 fixed or not:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool tx_glitch_fixed;
 	enum spi_imx_devtype devtype;
 };
 
@@ -622,8 +627,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	if (spi_imx->usedma)
+	/*
+	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+	 * before i.mx6ul.
+	 */
+	if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
 		ctrl |= MX51_ECSPI_CTRL_SMC;
+	else
+		ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -632,12 +643,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
+	u32 tx_wml = 0;
+
+	if (spi_imx->devtype_data->tx_glitch_fixed)
+		tx_wml = spi_imx->wml;
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(tx_wml) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1028,6 +1043,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.devtype = IMX53_ECSPI,
 };
 
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+	.intctrl = mx51_ecspi_intctrl,
+	.prepare_message = mx51_ecspi_prepare_message,
+	.prepare_transfer = mx51_ecspi_prepare_transfer,
+	.trigger = mx51_ecspi_trigger,
+	.rx_available = mx51_ecspi_rx_available,
+	.reset = mx51_ecspi_reset,
+	.setup_wml = mx51_setup_wml,
+	.fifo_size = 64,
+	.has_dmamode = true,
+	.dynamic_burst = true,
+	.has_slavemode = true,
+	.tx_glitch_fixed = true,
+	.disable = mx51_ecspi_disable,
+	.devtype = IMX51_ECSPI,
+};
+
 static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
 	{ .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
@@ -1036,6 +1068,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+	{ .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
@@ -1249,10 +1282,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */