diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-02-14 09:04:36 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2022-02-14 09:04:36 +0100 |
commit | fbd533e90d239e17d9427a6481ae60be25680cb7 (patch) | |
tree | 72f5b36af33981605eecf92da1516b9b4c37d5a6 /drivers/spi | |
parent | arm64: dts: qcom: sc7280: Set the default dr_mode for usb2 (diff) | |
parent | Linux 5.17-rc4 (diff) | |
download | linux-fbd533e90d239e17d9427a6481ae60be25680cb7.tar.xz linux-fbd533e90d239e17d9427a6481ae60be25680cb7.zip |
Merge 5.17-rc4 into usb-next
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/spi')
-rw-r--r-- | drivers/spi/spi-bcm-qspi.c | 2 | ||||
-rw-r--r-- | drivers/spi/spi-meson-spicc.c | 5 | ||||
-rw-r--r-- | drivers/spi/spi-mt65xx.c | 2 | ||||
-rw-r--r-- | drivers/spi/spi-stm32-qspi.c | 47 | ||||
-rw-r--r-- | drivers/spi/spi-stm32.c | 7 | ||||
-rw-r--r-- | drivers/spi/spi-uniphier.c | 18 |
6 files changed, 42 insertions, 39 deletions
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index c9a769b8594b..86c76211b3d3 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -585,7 +585,7 @@ static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs) u32 rd = 0; u32 wr = 0; - if (qspi->base[CHIP_SELECT]) { + if (cs >= 0 && qspi->base[CHIP_SELECT]) { rd = bcm_qspi_read(qspi, CHIP_SELECT, 0); wr = (rd & ~0xff) | (1 << cs); if (rd == wr) diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index c208efeadd18..0bc7daa7afc8 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -693,6 +693,11 @@ static int meson_spicc_probe(struct platform_device *pdev) writel_relaxed(0, spicc->base + SPICC_INTREG); irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto out_master; + } + ret = devm_request_irq(&pdev->dev, irq, meson_spicc_irq, 0, NULL, spicc); if (ret) { diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index a15de10ee286..753bd313e6fd 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -624,7 +624,7 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id) else mdata->state = MTK_SPI_IDLE; - if (!master->can_dma(master, master->cur_msg->spi, trans)) { + if (!master->can_dma(master, NULL, trans)) { if (trans->rx_buf) { cnt = mdata->xfer_len / 4; ioread32_rep(mdata->base + SPI_RX_DATA_REG, diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c index 514337c86d2c..ffdc55f87e82 100644 --- a/drivers/spi/spi-stm32-qspi.c +++ b/drivers/spi/spi-stm32-qspi.c @@ -688,7 +688,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) struct resource *res; int ret, irq; - ctrl = spi_alloc_master(dev, sizeof(*qspi)); + ctrl = devm_spi_alloc_master(dev, sizeof(*qspi)); if (!ctrl) return -ENOMEM; @@ -697,58 +697,46 @@ static int stm32_qspi_probe(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi"); qspi->io_base = devm_ioremap_resource(dev, res); - if (IS_ERR(qspi->io_base)) { - ret = PTR_ERR(qspi->io_base); - goto err_master_put; - } + if (IS_ERR(qspi->io_base)) + return PTR_ERR(qspi->io_base); qspi->phys_base = res->start; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_mm"); qspi->mm_base = devm_ioremap_resource(dev, res); - if (IS_ERR(qspi->mm_base)) { - ret = PTR_ERR(qspi->mm_base); - goto err_master_put; - } + if (IS_ERR(qspi->mm_base)) + return PTR_ERR(qspi->mm_base); qspi->mm_size = resource_size(res); - if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) { - ret = -EINVAL; - goto err_master_put; - } + if (qspi->mm_size > STM32_QSPI_MAX_MMAP_SZ) + return -EINVAL; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto err_master_put; - } + if (irq < 0) + return irq; ret = devm_request_irq(dev, irq, stm32_qspi_irq, 0, dev_name(dev), qspi); if (ret) { dev_err(dev, "failed to request irq\n"); - goto err_master_put; + return ret; } init_completion(&qspi->data_completion); init_completion(&qspi->match_completion); qspi->clk = devm_clk_get(dev, NULL); - if (IS_ERR(qspi->clk)) { - ret = PTR_ERR(qspi->clk); - goto err_master_put; - } + if (IS_ERR(qspi->clk)) + return PTR_ERR(qspi->clk); qspi->clk_rate = clk_get_rate(qspi->clk); - if (!qspi->clk_rate) { - ret = -EINVAL; - goto err_master_put; - } + if (!qspi->clk_rate) + return -EINVAL; ret = clk_prepare_enable(qspi->clk); if (ret) { dev_err(dev, "can not enable the clock\n"); - goto err_master_put; + return ret; } rstc = devm_reset_control_get_exclusive(dev, NULL); @@ -784,7 +772,7 @@ static int stm32_qspi_probe(struct platform_device *pdev) pm_runtime_enable(dev); pm_runtime_get_noresume(dev); - ret = devm_spi_register_master(dev, ctrl); + ret = spi_register_master(ctrl); if (ret) goto err_pm_runtime_free; @@ -806,8 +794,6 @@ err_dma_free: stm32_qspi_dma_free(qspi); err_clk_disable: clk_disable_unprepare(qspi->clk); -err_master_put: - spi_master_put(qspi->ctrl); return ret; } @@ -817,6 +803,7 @@ static int stm32_qspi_remove(struct platform_device *pdev) struct stm32_qspi *qspi = platform_get_drvdata(pdev); pm_runtime_get_sync(qspi->dev); + spi_unregister_master(qspi->ctrl); /* disable qspi */ writel_relaxed(0, qspi->io_base + QSPI_CR); stm32_qspi_dma_free(qspi); diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 9bd3fd1652f7..7fc24505a72c 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -221,7 +221,6 @@ struct stm32_spi; * time between frames (if driver has this functionality) * @set_number_of_data: optional routine to configure registers to desired * number of data (if driver has this functionality) - * @can_dma: routine to determine if the transfer is eligible for DMA use * @transfer_one_dma_start: routine to start transfer a single spi_transfer * using DMA * @dma_rx_cb: routine to call after DMA RX channel operation is complete @@ -232,7 +231,7 @@ struct stm32_spi; * @baud_rate_div_min: minimum baud rate divisor * @baud_rate_div_max: maximum baud rate divisor * @has_fifo: boolean to know if fifo is used for driver - * @has_startbit: boolean to know if start bit is used to start transfer + * @flags: compatible specific SPI controller flags used at registration time */ struct stm32_spi_cfg { const struct stm32_spi_regspec *regs; @@ -253,6 +252,7 @@ struct stm32_spi_cfg { unsigned int baud_rate_div_min; unsigned int baud_rate_div_max; bool has_fifo; + u16 flags; }; /** @@ -1722,6 +1722,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = { .baud_rate_div_min = STM32F4_SPI_BR_DIV_MIN, .baud_rate_div_max = STM32F4_SPI_BR_DIV_MAX, .has_fifo = false, + .flags = SPI_MASTER_MUST_TX, }; static const struct stm32_spi_cfg stm32h7_spi_cfg = { @@ -1854,7 +1855,7 @@ static int stm32_spi_probe(struct platform_device *pdev) master->prepare_message = stm32_spi_prepare_msg; master->transfer_one = stm32_spi_transfer_one; master->unprepare_message = stm32_spi_unprepare_msg; - master->flags = SPI_MASTER_MUST_TX; + master->flags = spi->cfg->flags; spi->dma_tx = dma_request_chan(spi->dev, "tx"); if (IS_ERR(spi->dma_tx)) { diff --git a/drivers/spi/spi-uniphier.c b/drivers/spi/spi-uniphier.c index 342ee8d2c476..cc0da4822231 100644 --- a/drivers/spi/spi-uniphier.c +++ b/drivers/spi/spi-uniphier.c @@ -726,7 +726,7 @@ static int uniphier_spi_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "failed to get TX DMA capacities: %d\n", ret); - goto out_disable_clk; + goto out_release_dma; } dma_tx_burst = caps.max_burst; } @@ -735,7 +735,7 @@ static int uniphier_spi_probe(struct platform_device *pdev) if (IS_ERR_OR_NULL(master->dma_rx)) { if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER) { ret = -EPROBE_DEFER; - goto out_disable_clk; + goto out_release_dma; } master->dma_rx = NULL; dma_rx_burst = INT_MAX; @@ -744,7 +744,7 @@ static int uniphier_spi_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "failed to get RX DMA capacities: %d\n", ret); - goto out_disable_clk; + goto out_release_dma; } dma_rx_burst = caps.max_burst; } @@ -753,10 +753,20 @@ static int uniphier_spi_probe(struct platform_device *pdev) ret = devm_spi_register_master(&pdev->dev, master); if (ret) - goto out_disable_clk; + goto out_release_dma; return 0; +out_release_dma: + if (!IS_ERR_OR_NULL(master->dma_rx)) { + dma_release_channel(master->dma_rx); + master->dma_rx = NULL; + } + if (!IS_ERR_OR_NULL(master->dma_tx)) { + dma_release_channel(master->dma_tx); + master->dma_tx = NULL; + } + out_disable_clk: clk_disable_unprepare(priv->clk); |