diff options
author | Marek Vasut <marex@denx.de> | 2020-07-25 16:49:47 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-07-30 08:46:22 +0200 |
commit | 7df5081cbf5e1c342acd30850a483ef504519937 (patch) | |
tree | 656f57830f9eeee82fcc2007adf36430fc1b8946 /drivers/tty | |
parent | serial: 8250_dw: Fix common clocks usage race condition (diff) | |
download | linux-7df5081cbf5e1c342acd30850a483ef504519937.tar.xz linux-7df5081cbf5e1c342acd30850a483ef504519937.zip |
serial: stm32: Add RS485 RTS GPIO control
While the STM32 does support RS485 drive-enable control within the
UART IP itself, some systems have the drive-enable line connected
to a pin which cannot be pinmuxed as RTS. Add support for toggling
the RTS GPIO line using the modem control GPIOs to provide at least
some sort of emulation.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Link: https://lore.kernel.org/r/20200725144947.537007-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/stm32-usart.c | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index d1c5e536a167..143300a80090 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -129,9 +129,13 @@ static int stm32_config_rs485(struct uart_port *port, if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { cr3 &= ~USART_CR3_DEP; rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); } else { cr3 |= USART_CR3_DEP; rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); } writel_relaxed(cr3, port->membase + ofs->cr3); @@ -847,9 +851,13 @@ static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, if (rs485conf->flags & SER_RS485_RTS_ON_SEND) { cr3 &= ~USART_CR3_DEP; rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND; + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl & ~TIOCM_RTS); } else { cr3 |= USART_CR3_DEP; rs485conf->flags |= SER_RS485_RTS_AFTER_SEND; + mctrl_gpio_set(stm32_port->gpios, + stm32_port->port.mctrl | TIOCM_RTS); } } else { |