summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>2024-06-04 19:05:13 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2024-06-24 16:09:37 +0200
commit2f50304e9efb69604040feadc13f9590be8cd391 (patch)
tree752d3a3d1cc2d59991710f0b0a45f56919308a59 /drivers
parentdt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF... (diff)
downloadlinux-2f50304e9efb69604040feadc13f9590be8cd391.tar.xz
linux-2f50304e9efb69604040feadc13f9590be8cd391.zip
serial: sh-sci: Add support for RZ/V2H(P) SoC
Add serial support for RZ/V2H(P) SoC with earlycon. The SCIF interface in the Renesas RZ/V2H(P) is similar to that available in the RZ/G2L (R9A07G044) SoC, with the following differences: - RZ/V2H(P) SoC has three additional interrupts: one for Tx end/Rx ready and two for Rx and Tx buffer full, all of which are edge-triggered. - RZ/V2H(P) supports asynchronous mode, whereas RZ/G2L supports both synchronous and asynchronous modes. - There are differences in the configuration of certain registers such as SCSMR, SCFCR, and SCSPTR between the two SoCs. To handle these differences on RZ/V2H(P) SoC SCIx_RZV2H_SCIF_REGTYPE is added. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240604170513.522631-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/serial/sh-sci.c55
1 files changed, 50 insertions, 5 deletions
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index f738980a8b2c..b80e9a528e17 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -318,6 +318,37 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
},
/*
+ * The "SCIF" that is in RZ/V2H(P) SoC is similar to one found on RZ/G2L SoC
+ * with below differences,
+ * - Break out of interrupts are different: ERI, BRI, RXI, TXI, TEI, DRI,
+ * TEI-DRI, RXI-EDGE and TXI-EDGE.
+ * - SCSMR register does not have CM bit (BIT(7)) ie it does not support synchronous mode.
+ * - SCFCR register does not have SCFCR_MCE bit.
+ * - SCSPTR register has only bits SCSPTR_SPB2DT and SCSPTR_SPB2IO.
+ */
+ [SCIx_RZV2H_SCIF_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 16 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0a, 8 },
+ [SCFCR] = { 0x0c, 16 },
+ [SCFDR] = { 0x0e, 16 },
+ [SCSPTR] = { 0x10, 16 },
+ [SCLSR] = { 0x12, 16 },
+ [SEMR] = { 0x14, 8 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
* Common SH-3 SCIF definitions.
*/
[SCIx_SH3_SCIF_REGTYPE] = {
@@ -757,7 +788,7 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
}
sci_serial_out(port, SCPDR, data);
sci_serial_out(port, SCPCR, ctrl);
- } else if (sci_getreg(port, SCSPTR)->size) {
+ } else if (sci_getreg(port, SCSPTR)->size && s->cfg->regtype != SCIx_RZV2H_SCIF_REGTYPE) {
u16 status = sci_serial_in(port, SCSPTR);
/* RTS# is always output; and active low, unless autorts */
@@ -2124,8 +2155,9 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (!(mctrl & TIOCM_RTS)) {
/* Disable Auto RTS */
- sci_serial_out(port, SCFCR,
- sci_serial_in(port, SCFCR) & ~SCFCR_MCE);
+ if (s->cfg->regtype != SCIx_RZV2H_SCIF_REGTYPE)
+ sci_serial_out(port, SCFCR,
+ sci_serial_in(port, SCFCR) & ~SCFCR_MCE);
/* Clear RTS */
sci_set_rts(port, 0);
@@ -2137,8 +2169,9 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
}
/* Enable Auto RTS */
- sci_serial_out(port, SCFCR,
- sci_serial_in(port, SCFCR) | SCFCR_MCE);
+ if (s->cfg->regtype != SCIx_RZV2H_SCIF_REGTYPE)
+ sci_serial_out(port, SCFCR,
+ sci_serial_in(port, SCFCR) | SCFCR_MCE);
} else {
/* Set RTS */
sci_set_rts(port, 1);
@@ -3225,6 +3258,10 @@ static const struct of_device_id of_sci_match[] __maybe_unused = {
.compatible = "renesas,scif-r9a07g044",
.data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
},
+ {
+ .compatible = "renesas,scif-r9a09g057",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_RZV2H_SCIF_REGTYPE),
+ },
/* Family-specific types */
{
.compatible = "renesas,rcar-gen1-scif",
@@ -3533,6 +3570,13 @@ static int __init rzscifa_early_console_setup(struct earlycon_device *device,
return early_console_setup(device, PORT_SCIF);
}
+static int __init rzv2hscif_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ port_cfg.regtype = SCIx_RZV2H_SCIF_REGTYPE;
+ return early_console_setup(device, PORT_SCIF);
+}
+
static int __init scifa_early_console_setup(struct earlycon_device *device,
const char *opt)
{
@@ -3553,6 +3597,7 @@ OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
OF_EARLYCON_DECLARE(scif, "renesas,scif", scif_early_console_setup);
OF_EARLYCON_DECLARE(scif, "renesas,scif-r7s9210", rzscifa_early_console_setup);
OF_EARLYCON_DECLARE(scif, "renesas,scif-r9a07g044", rzscifa_early_console_setup);
+OF_EARLYCON_DECLARE(scif, "renesas,scif-r9a09g057", rzv2hscif_early_console_setup);
OF_EARLYCON_DECLARE(scifa, "renesas,scifa", scifa_early_console_setup);
OF_EARLYCON_DECLARE(scifb, "renesas,scifb", scifb_early_console_setup);
OF_EARLYCON_DECLARE(hscif, "renesas,hscif", hscif_early_console_setup);