summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorFelipe Balbi <balbi@ti.com>2012-09-06 14:45:23 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-09-06 18:17:01 +0200
commit81b75aef11abfd7b51e719a5388189eefa82e997 (patch)
tree9ce12363f87f0e1924d609a82d4f011cc2912ac1 /drivers
parentserial: add OMAP-specific defines (diff)
downloadlinux-81b75aef11abfd7b51e719a5388189eefa82e997.tar.xz
linux-81b75aef11abfd7b51e719a5388189eefa82e997.zip
serial: omap: simplify IRQ handling
quite a few changes here, though they are pretty obvious. In summary we're making sure to detect which interrupt type we need to handle before calling the underlying interrupt handling procedure. Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/serial/omap-serial.c51
1 files changed, 38 insertions, 13 deletions
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index dd3971fe899f..d5a08cb5213d 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -351,33 +351,58 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
{
struct uart_omap_port *up = dev_id;
unsigned int iir, lsr;
+ unsigned int type;
unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+ spin_lock_irqsave(&up->port.lock, flags);
pm_runtime_get_sync(up->dev);
iir = serial_in(up, UART_IIR);
- if (iir & UART_IIR_NO_INT) {
- pm_runtime_mark_last_busy(up->dev);
- pm_runtime_put_autosuspend(up->dev);
- return IRQ_NONE;
- }
+again:
+ if (iir & UART_IIR_NO_INT)
+ goto out;
- spin_lock_irqsave(&up->port.lock, flags);
+ ret = IRQ_HANDLED;
lsr = serial_in(up, UART_LSR);
- if (iir & UART_IIR_RLSI) {
+
+ /* extract IRQ type from IIR register */
+ type = iir & 0x3e;
+
+ switch (type) {
+ case UART_IIR_MSI:
+ check_modem_status(up);
+ break;
+ case UART_IIR_THRI:
+ if (lsr & UART_LSR_THRE)
+ transmit_chars(up);
+ break;
+ case UART_IIR_RDI:
if (lsr & UART_LSR_DR)
receive_chars(up, &lsr);
+ break;
+ case UART_IIR_RLSI:
+ if (lsr & UART_LSR_BRK_ERROR_BITS)
+ receive_chars(up, &lsr);
+ break;
+ case UART_IIR_RX_TIMEOUT:
+ receive_chars(up, &lsr);
+ break;
+ case UART_IIR_CTS_RTS_DSR:
+ iir = serial_in(up, UART_IIR);
+ goto again;
+ case UART_IIR_XOFF:
+ /* FALLTHROUGH */
+ default:
+ break;
}
- check_modem_status(up);
- if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
- transmit_chars(up);
-
+out:
spin_unlock_irqrestore(&up->port.lock, flags);
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
-
up->port_activity = jiffies;
- return IRQ_HANDLED;
+
+ return ret;
}
static unsigned int serial_omap_tx_empty(struct uart_port *port)