diff options
| author | Frieder Schrempf <frieder.schrempf@kontron.de> | 2021-02-11 11:55:28 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2021-02-11 14:11:34 +0100 |
| commit | 8c67a11bae889f51fe5054364c3c789dfae3ad73 (patch) | |
| tree | 70d31c34dbbc50889d7845bccf547e8b53506435 /drivers | |
| parent | regulator: mt6315: Add support for MT6315 regulator (diff) | |
| download | linux-8c67a11bae889f51fe5054364c3c789dfae3ad73.tar.xz linux-8c67a11bae889f51fe5054364c3c789dfae3ad73.zip | |
regulator: pca9450: Add SD_VSEL GPIO for LDO5
LDO5 has two separate control registers. LDO5CTRL_L is used if the
input signal SD_VSEL is low and LDO5CTRL_H if it is high.
The current driver implementation only uses LDO5CTRL_H. To make this
work on boards that have SD_VSEL connected to a GPIO, we add support
for specifying an optional GPIO and setting it to high at probe time.
In the future we might also want to add support for boards that have
SD_VSEL set to a fixed low level. In this case we need to change the
driver to be able to use the LDO5CTRL_L register.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/regulator/pca9450-regulator.c | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c index cb29421d745a..1bba8fdcb7b7 100644 --- a/drivers/regulator/pca9450-regulator.c +++ b/drivers/regulator/pca9450-regulator.c @@ -5,6 +5,7 @@ */ #include <linux/err.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/kernel.h> @@ -32,6 +33,7 @@ struct pca9450_regulator_desc { struct pca9450 { struct device *dev; struct regmap *regmap; + struct gpio_desc *sd_vsel_gpio; enum pca9450_chip_type type; unsigned int rcnt; int irq; @@ -795,6 +797,18 @@ static int pca9450_i2c_probe(struct i2c_client *i2c, return ret; } + /* + * The driver uses the LDO5CTRL_H register to control the LDO5 regulator. + * This is only valid if the SD_VSEL input of the PMIC is high. Let's + * check if the pin is available as GPIO and set it to high. + */ + pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH); + + if (IS_ERR(pca9450->sd_vsel_gpio)) { + dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n"); + return ret; + } + dev_info(&i2c->dev, "%s probed.\n", type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); |