diff options
| author | Richard Genoud <richard.genoud@gmail.com> | 2016-12-06 13:05:33 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-01-11 08:18:45 +0100 |
| commit | b389f173aaa1204d6dc1f299082a162eb0491545 (patch) | |
| tree | d702ef5021258fc6894bec24dcb2e68a06a3c0a5 /drivers | |
| parent | tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx (diff) | |
| download | linux-b389f173aaa1204d6dc1f299082a162eb0491545.tar.xz linux-b389f173aaa1204d6dc1f299082a162eb0491545.zip | |
tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
When using RS485 in half duplex, RX should be enabled when TX is
finished, and stopped when TX starts.
Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half
duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
was used. So, collisions could happened.
But disabling RX in atmel_start_tx() uncovered another bug:
RX was enabled again in the wrong place (in atmel_tx_dma) instead of
being enabled when TX is finished (in atmel_complete_tx_dma), so the
transmission simply stopped.
This bug was not triggered before commit 0058f0871efe7b01c6
("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
never disabled before.
Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.
Cc: stable@vger.kernel.org
Reported-by: Gil Weber <webergil@gmail.com>
Fixes: 0058f0871efe7b01c6
Tested-by: Gil Weber <webergil@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 11 |
1 files changed, 5 insertions, 6 deletions
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index f9d42de5ab2d..fabbe76203bb 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -809,6 +809,11 @@ static void atmel_complete_tx_dma(void *arg) */ if (!uart_circ_empty(xmit)) atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); + else if ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } spin_unlock_irqrestore(&port->lock, flags); } @@ -911,12 +916,6 @@ static void atmel_tx_dma(struct uart_port *port) desc->callback = atmel_complete_tx_dma; desc->callback_param = atmel_port; atmel_port->cookie_tx = dmaengine_submit(desc); - - } else { - if (port->rs485.flags & SER_RS485_ENABLED) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); - } } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |