Annotate hardware config module parameters in drivers/net/can/

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/can/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
cc: Wolfgang Grandegger <wg@grandegger.com>
cc: linux-can@vger.kernel.org
cc: netdev@vger.kernel.org

2 files changed, 8 insertions, 8 deletions

diff --git a/drivers/net/can/cc770/cc770_isa.c b/drivers/net/can/cc770/cc770_isa.c
index e0d15711e9ac..3a30fd3b4498 100644
--- a/drivers/net/can/cc770/cc770_isa.c
+++ b/drivers/net/can/cc770/cc770_isa.c
@@ -82,16 +82,16 @@ static u8 cor[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
 
-module_param_array(port, ulong, NULL, S_IRUGO);
+module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
 MODULE_PARM_DESC(port, "I/O port number");
 
-module_param_array(mem, ulong, NULL, S_IRUGO);
+module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
 MODULE_PARM_DESC(mem, "I/O memory address");
 
-module_param_array(indirect, int, NULL, S_IRUGO);
+module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
 MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
 
-module_param_array(irq, int, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
 MODULE_PARM_DESC(irq, "IRQ number");
 
 module_param_array(clk, int, NULL, S_IRUGO);
diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c
index e97e6d35b300..a89c1e92554d 100644
--- a/drivers/net/can/sja1000/sja1000_isa.c
+++ b/drivers/net/can/sja1000/sja1000_isa.c
@@ -48,16 +48,16 @@ static unsigned char ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
 static spinlock_t indirect_lock[MAXDEV];  /* lock for indirect access mode */
 
-module_param_array(port, ulong, NULL, S_IRUGO);
+module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
 MODULE_PARM_DESC(port, "I/O port number");
 
-module_param_array(mem, ulong, NULL, S_IRUGO);
+module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
 MODULE_PARM_DESC(mem, "I/O memory address");
 
-module_param_array(indirect, int, NULL, S_IRUGO);
+module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
 MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
 
-module_param_array(irq, int, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
 MODULE_PARM_DESC(irq, "IRQ number");
 
 module_param_array(clk, int, NULL, S_IRUGO);