Merge branch 'linus' into stackprotector

Conflicts:
	arch/x86/kernel/Makefile
	include/asm-x86/pda.h

9 files changed, 121 insertions, 163 deletions

diff --git a/init/Kconfig b/init/Kconfig
index 6199d1120900..8a8e2d00c40e 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -171,7 +171,7 @@ config BSD_PROCESS_ACCT_V3
 	  process and it's parent. Note that this file format is incompatible
 	  with previous v0/v1/v2 file formats, so you will need updated tools
 	  for processing it. A preliminary version of these tools is available
-	  at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
+	  at <http://www.gnu.org/software/acct/>.
 
 config TASKSTATS
 	bool "Export task/process statistics through netlink (EXPERIMENTAL)"
@@ -486,7 +486,7 @@ config PID_NS
 	default n
 	depends on NAMESPACES && EXPERIMENTAL
 	help
-	  Suport process id namespaces.  This allows having multiple
+	  Support process id namespaces.  This allows having multiple
 	  process with the same pid as long as they are in different
 	  pid namespaces.  This is a building block of containers.
 
@@ -522,7 +522,7 @@ config CC_OPTIMIZE_FOR_SIZE
 	  Enabling this option will pass "-Os" instead of "-O2" to gcc
 	  resulting in a smaller kernel.
 
-	  If unsure, say N.
+	  If unsure, say Y.
 
 config SYSCTL
 	bool
@@ -558,17 +558,6 @@ config SYSCTL_SYSCALL
 
 	  If unsure say Y here.
 
-config SYSCTL_SYSCALL_CHECK
-	bool "Sysctl checks" if EMBEDDED
-	depends on SYSCTL_SYSCALL
-	default y
-	---help---
-	  sys_sysctl uses binary paths that have been found challenging
-	  to properly maintain and use. This enables checks that help
-	  you to keep things correct.
-
-	  If unsure say Y here.
-
 config KALLSYMS
 	 bool "Load all symbols for debugging/ksymoops" if EMBEDDED
 	 default y
@@ -790,18 +779,12 @@ config MARKERS
 
 source "arch/Kconfig"
 
-config PROC_PAGE_MONITOR
- 	default y
-	depends on PROC_FS && MMU
-	bool "Enable /proc page monitoring" if EMBEDDED
- 	help
-	  Various /proc files exist to monitor process memory utilization:
-	  /proc/pid/smaps, /proc/pid/clear_refs, /proc/pid/pagemap,
-	  /proc/kpagecount, and /proc/kpageflags. Disabling these
-          interfaces will reduce the size of the kernel by approximately 4kb.
-
 endmenu		# General setup
 
+config HAVE_GENERIC_DMA_COHERENT
+	bool
+	default n
+
 config SLABINFO
 	bool
 	depends on PROC_FS
@@ -841,9 +824,10 @@ menuconfig MODULES
 
 	  If unsure, say Y.
 
+if MODULES
+
 config MODULE_FORCE_LOAD
 	bool "Forced module loading"
-	depends on MODULES
 	default n
 	help
 	  Allow loading of modules without version information (ie. modprobe
@@ -852,12 +836,11 @@ config MODULE_FORCE_LOAD
 
 config MODULE_UNLOAD
 	bool "Module unloading"
-	depends on MODULES
 	help
 	  Without this option you will not be able to unload any
 	  modules (note that some modules may not be unloadable
-	  anyway), which makes your kernel slightly smaller and
-	  simpler.  If unsure, say Y.
+	  anyway), which makes your kernel smaller, faster
+	  and simpler.  If unsure, say Y.
 
 config MODULE_FORCE_UNLOAD
 	bool "Forced module unloading"
@@ -871,7 +854,6 @@ config MODULE_FORCE_UNLOAD
 
 config MODVERSIONS
 	bool "Module versioning support"
-	depends on MODULES
 	help
 	  Usually, you have to use modules compiled with your kernel.
 	  Saying Y here makes it sometimes possible to use modules
@@ -882,7 +864,6 @@ config MODVERSIONS
 
 config MODULE_SRCVERSION_ALL
 	bool "Source checksum for all modules"
-	depends on MODULES
 	help
 	  Modules which contain a MODULE_VERSION get an extra "srcversion"
 	  field inserted into their modinfo section, which contains a
@@ -893,16 +874,12 @@ config MODULE_SRCVERSION_ALL
 	  will be created for all modules.  If unsure, say N.
 
 config KMOD
-	bool "Automatic kernel module loading"
-	depends on MODULES
-	help
-	  Normally when you have selected some parts of the kernel to
-	  be created as kernel modules, you must load them (using the
-	  "modprobe" command) before you can use them. If you say Y
-	  here, some parts of the kernel will be able to load modules
-	  automatically: when a part of the kernel needs a module, it
-	  runs modprobe with the appropriate arguments, thereby
-	  loading the module if it is available.  If unsure, say Y.
+	def_bool y
+	help
+	  This is being removed soon.  These days, CONFIG_MODULES
+	  implies CONFIG_KMOD, so use that instead.
+
+endif # MODULES
 
 config STOP_MACHINE
 	bool
diff --git a/init/calibrate.c b/init/calibrate.c
index ecb3822d4f70..a379c9061199 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -8,7 +8,9 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/timex.h>
+#include <linux/smp.h>
 
+unsigned long lpj_fine;
 unsigned long preset_lpj;
 static int __init lpj_setup(char *str)
 {
@@ -33,9 +35,9 @@ static unsigned long __cpuinit calibrate_delay_direct(void)
 	unsigned long pre_start, start, post_start;
 	unsigned long pre_end, end, post_end;
 	unsigned long start_jiffies;
-	unsigned long tsc_rate_min, tsc_rate_max;
-	unsigned long good_tsc_sum = 0;
-	unsigned long good_tsc_count = 0;
+	unsigned long timer_rate_min, timer_rate_max;
+	unsigned long good_timer_sum = 0;
+	unsigned long good_timer_count = 0;
 	int i;
 
 	if (read_current_timer(&pre_start) < 0 )
@@ -79,22 +81,24 @@ static unsigned long __cpuinit calibrate_delay_direct(void)
 		}
 		read_current_timer(&post_end);
 
-		tsc_rate_max = (post_end - pre_start) / DELAY_CALIBRATION_TICKS;
-		tsc_rate_min = (pre_end - post_start) / DELAY_CALIBRATION_TICKS;
+		timer_rate_max = (post_end - pre_start) /
+					DELAY_CALIBRATION_TICKS;
+		timer_rate_min = (pre_end - post_start) /
+					DELAY_CALIBRATION_TICKS;
 
 		/*
-	 	 * If the upper limit and lower limit of the tsc_rate is
+		 * If the upper limit and lower limit of the timer_rate is
 		 * >= 12.5% apart, redo calibration.
 		 */
 		if (pre_start != 0 && pre_end != 0 &&
-		    (tsc_rate_max - tsc_rate_min) < (tsc_rate_max >> 3)) {
-			good_tsc_count++;
-			good_tsc_sum += tsc_rate_max;
+		    (timer_rate_max - timer_rate_min) < (timer_rate_max >> 3)) {
+			good_timer_count++;
+			good_timer_sum += timer_rate_max;
 		}
 	}
 
-	if (good_tsc_count)
-		return (good_tsc_sum/good_tsc_count);
+	if (good_timer_count)
+		return (good_timer_sum/good_timer_count);
 
 	printk(KERN_WARNING "calibrate_delay_direct() failed to get a good "
 	       "estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n");
@@ -108,6 +112,10 @@ static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;}
  * This is the number of bits of precision for the loops_per_jiffy.  Each
  * bit takes on average 1.5/HZ seconds.  This (like the original) is a little
  * better than 1%
+ * For the boot cpu we can skip the delay calibration and assign it a value
+ * calculated based on the timer frequency.
+ * For the rest of the CPUs we cannot assume that the timer frequency is same as
+ * the cpu frequency, hence do the calibration for those.
  */
 #define LPS_PREC 8
 
@@ -118,20 +126,20 @@ void __cpuinit calibrate_delay(void)
 
 	if (preset_lpj) {
 		loops_per_jiffy = preset_lpj;
-		printk("Calibrating delay loop (skipped)... "
-			"%lu.%02lu BogoMIPS preset\n",
-			loops_per_jiffy/(500000/HZ),
-			(loops_per_jiffy/(5000/HZ)) % 100);
+		printk(KERN_INFO
+			"Calibrating delay loop (skipped) preset value.. ");
+	} else if ((smp_processor_id() == 0) && lpj_fine) {
+		loops_per_jiffy = lpj_fine;
+		printk(KERN_INFO
+			"Calibrating delay loop (skipped), "
+			"value calculated using timer frequency.. ");
 	} else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) {
-		printk("Calibrating delay using timer specific routine.. ");
-		printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
-			loops_per_jiffy/(500000/HZ),
-			(loops_per_jiffy/(5000/HZ)) % 100,
-			loops_per_jiffy);
+		printk(KERN_INFO
+			"Calibrating delay using timer specific routine.. ");
 	} else {
 		loops_per_jiffy = (1<<12);
 
-		printk(KERN_DEBUG "Calibrating delay loop... ");
+		printk(KERN_INFO "Calibrating delay loop... ");
 		while ((loops_per_jiffy <<= 1) != 0) {
 			/* wait for "start of" clock tick */
 			ticks = jiffies;
@@ -161,12 +169,8 @@ void __cpuinit calibrate_delay(void)
 			if (jiffies != ticks)	/* longer than 1 tick */
 				loops_per_jiffy &= ~loopbit;
 		}
-
-		/* Round the value and print it */
-		printk("%lu.%02lu BogoMIPS (lpj=%lu)\n",
-			loops_per_jiffy/(500000/HZ),
-			(loops_per_jiffy/(5000/HZ)) % 100,
-			loops_per_jiffy);
 	}
-
+	printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+			loops_per_jiffy/(500000/HZ),
+			(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
 }
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 660c1e50c91b..d055b1914c3d 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -12,6 +12,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/fs.h>
+#include <linux/initrd.h>
 
 #include <linux/nfs_fs.h>
 #include <linux/nfs_fs_sb.h>
@@ -22,7 +23,7 @@
 int __initdata rd_doload;	/* 1 = load RAM disk, 0 = don't load */
 
 int root_mountflags = MS_RDONLY | MS_SILENT;
-char * __initdata root_device_name;
+static char * __initdata root_device_name;
 static char __initdata saved_root_name[64];
 static int __initdata root_wait;
 
@@ -262,6 +263,10 @@ retry:
 		printk("Please append a correct \"root=\" boot option; here are the available partitions:\n");
 
 		printk_all_partitions();
+#ifdef CONFIG_DEBUG_BLOCK_EXT_DEVT
+		printk("DEBUG_BLOCK_EXT_DEVT is enabled, you need to specify "
+		       "explicit textual name for \"root=\" boot option.\n");
+#endif
 		panic("VFS: Unable to mount root fs on %s", b);
 	}
 
@@ -372,7 +377,8 @@ void __init prepare_namespace(void)
 
 	if (saved_root_name[0]) {
 		root_device_name = saved_root_name;
-		if (!strncmp(root_device_name, "mtd", 3)) {
+		if (!strncmp(root_device_name, "mtd", 3) ||
+		    !strncmp(root_device_name, "ubi", 3)) {
 			mount_block_root(root_device_name, root_mountflags);
 			goto out;
 		}
diff --git a/init/do_mounts.h b/init/do_mounts.h
index 735705d137ff..9aa968d54329 100644
--- a/init/do_mounts.h
+++ b/init/do_mounts.h
@@ -11,7 +11,6 @@ void  change_floppy(char *fmt, ...);
 void  mount_block_root(char *name, int flags);
 void  mount_root(void);
 extern int root_mountflags;
-extern char *root_device_name;
 
 static inline int create_dev(char *name, dev_t dev)
 {
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
index 693d24694a6c..48b3fadd83ed 100644
--- a/init/do_mounts_md.c
+++ b/init/do_mounts_md.c
@@ -12,7 +12,12 @@
  * The code for that is here.
  */
 
-static int __initdata raid_noautodetect, raid_autopart;
+#ifdef CONFIG_MD_AUTODETECT
+static int __initdata raid_noautodetect;
+#else
+static int __initdata raid_noautodetect=1;
+#endif
+static int __initdata raid_autopart;
 
 static struct {
 	int minor;
@@ -252,6 +257,8 @@ static int __init raid_setup(char *str)
 
 		if (!strncmp(str, "noautodetect", wlen))
 			raid_noautodetect = 1;
+		if (!strncmp(str, "autodetect", wlen))
+			raid_noautodetect = 0;
 		if (strncmp(str, "partitionable", wlen)==0)
 			raid_autopart = 1;
 		if (strncmp(str, "part", wlen)==0)
@@ -264,17 +271,32 @@ static int __init raid_setup(char *str)
 __setup("raid=", raid_setup);
 __setup("md=", md_setup);
 
+static void autodetect_raid(void)
+{
+	int fd;
+
+	/*
+	 * Since we don't want to detect and use half a raid array, we need to
+	 * wait for the known devices to complete their probing
+	 */
+	printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
+	printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
+	while (driver_probe_done() < 0)
+		msleep(100);
+	fd = sys_open("/dev/md0", 0, 0);
+	if (fd >= 0) {
+		sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
+		sys_close(fd);
+	}
+}
+
 void __init md_run_setup(void)
 {
 	create_dev("/dev/md0", MKDEV(MD_MAJOR, 0));
+
 	if (raid_noautodetect)
-		printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n");
-	else {
-		int fd = sys_open("/dev/md0", 0, 0);
-		if (fd >= 0) {
-			sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
-			sys_close(fd);
-		}
-	}
+		printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n");
+	else
+		autodetect_raid();
 	md_setup_drive();
 }
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index 46dfd64ae8fb..fedef93b586f 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -10,8 +10,6 @@
 
 #include "do_mounts.h"
 
-#define BUILD_CRAMDISK
-
 int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
 
 static int __init prompt_ramdisk(char *str)
@@ -162,14 +160,8 @@ int __init rd_load_image(char *from)
 		goto done;
 
 	if (nblocks == 0) {
-#ifdef BUILD_CRAMDISK
 		if (crd_load(in_fd, out_fd) == 0)
 			goto successful_load;
-#else
-		printk(KERN_NOTICE
-		       "RAMDISK: Kernel does not support compressed "
-		       "RAM disk images\n");
-#endif
 		goto done;
 	}
 
@@ -267,8 +259,6 @@ int __init rd_load_disk(int n)
 	return rd_load_image("/dev/root");
 }
 
-#ifdef BUILD_CRAMDISK
-
 /*
  * gzip declarations
  */
@@ -313,32 +303,11 @@ static int crd_infd, crd_outfd;
 
 static int  __init fill_inbuf(void);
 static void __init flush_window(void);
-static void __init *malloc(size_t size);
-static void __init free(void *where);
 static void __init error(char *m);
-static void __init gzip_mark(void **);
-static void __init gzip_release(void **);
-
-#include "../lib/inflate.c"
 
-static void __init *malloc(size_t size)
-{
-	return kmalloc(size, GFP_KERNEL);
-}
-
-static void __init free(void *where)
-{
-	kfree(where);
-}
-
-static void __init gzip_mark(void **ptr)
-{
-}
-
-static void __init gzip_release(void **ptr)
-{
-}
+#define NO_INFLATE_MALLOC
 
+#include "../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
@@ -425,5 +394,3 @@ static int __init crd_load(int in_fd, int out_fd)
 	kfree(window);
 	return result;
 }
-
-#endif  /* BUILD_CRAMDISK */
diff --git a/init/initramfs.c b/init/initramfs.c
index 8eeeccb328c9..644fc01ad5f0 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -14,16 +14,6 @@ static void __init error(char *x)
 		message = x;
 }
 
-static void __init *malloc(size_t size)
-{
-	return kmalloc(size, GFP_KERNEL);
-}
-
-static void __init free(void *where)
-{
-	kfree(where);
-}
-
 /* link hash */
 
 #define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
@@ -407,18 +397,10 @@ static long bytes_out;
 
 static void __init flush_window(void);
 static void __init error(char *m);
-static void __init gzip_mark(void **);
-static void __init gzip_release(void **);
 
-#include "../lib/inflate.c"
+#define NO_INFLATE_MALLOC
 
-static void __init gzip_mark(void **ptr)
-{
-}
-
-static void __init gzip_release(void **ptr)
-{
-}
+#include "../lib/inflate.c"
 
 /* ===========================================================================
  * Write the output window window[0..outcnt-1] and update crc and bytes_out.
diff --git a/init/main.c b/init/main.c
index b44e4eb0f5e3..6aaff34a38c0 100644
--- a/init/main.c
+++ b/init/main.c
@@ -23,7 +23,6 @@
 #include <linux/init.h>
 #include <linux/smp_lock.h>
 #include <linux/initrd.h>
-#include <linux/hdreg.h>
 #include <linux/bootmem.h>
 #include <linux/tty.h>
 #include <linux/gfp.h>
@@ -32,6 +31,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/start_kernel.h>
 #include <linux/security.h>
+#include <linux/smp.h>
 #include <linux/workqueue.h>
 #include <linux/profile.h>
 #include <linux/rcupdate.h>
@@ -87,8 +87,6 @@ extern void init_IRQ(void);
 extern void fork_init(unsigned long);
 extern void mca_init(void);
 extern void sbus_init(void);
-extern void pidhash_init(void);
-extern void pidmap_init(void);
 extern void prio_tree_init(void);
 extern void radix_tree_init(void);
 extern void free_initmem(void);
@@ -415,6 +413,13 @@ static void __init smp_init(void)
 {
 	unsigned int cpu;
 
+	/*
+	 * Set up the current CPU as possible to migrate to.
+	 * The other ones will be done by cpu_up/cpu_down()
+	 */
+	cpu = smp_processor_id();
+	cpu_set(cpu, cpu_active_map);
+
 	/* FIXME: This should be done in userspace --RR */
 	for_each_present_cpu(cpu) {
 		if (num_online_cpus() >= setup_max_cpus)
@@ -636,9 +641,11 @@ asmlinkage void __init start_kernel(void)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start && !initrd_below_start_ok &&
-			initrd_start < min_low_pfn << PAGE_SHIFT) {
+	    page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
 		printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
-		    "disabling it.\n",initrd_start,min_low_pfn << PAGE_SHIFT);
+		    "disabling it.\n",
+		    page_to_pfn(virt_to_page((void *)initrd_start)),
+		    min_low_pfn);
 		initrd_start = 0;
 	}
 #endif
@@ -691,7 +698,7 @@ asmlinkage void __init start_kernel(void)
 	rest_init();
 }
 
-static int __initdata initcall_debug;
+static int initcall_debug;
 
 static int __init initcall_debug_setup(char *str)
 {
@@ -700,7 +707,7 @@ static int __init initcall_debug_setup(char *str)
 }
 __setup("initcall_debug", initcall_debug_setup);
 
-static void __init do_one_initcall(initcall_t fn)
+int do_one_initcall(initcall_t fn)
 {
 	int count = preempt_count();
 	ktime_t t0, t1, delta;
@@ -708,7 +715,7 @@ static void __init do_one_initcall(initcall_t fn)
 	int result;
 
 	if (initcall_debug) {
-		print_fn_descriptor_symbol("calling  %s\n", fn);
+		printk("calling  %pF @ %i\n", fn, task_pid_nr(current));
 		t0 = ktime_get();
 	}
 
@@ -718,8 +725,8 @@ static void __init do_one_initcall(initcall_t fn)
 		t1 = ktime_get();
 		delta = ktime_sub(t1, t0);
 
-		print_fn_descriptor_symbol("initcall %s", fn);
-		printk(" returned %d after %Ld msecs\n", result,
+		printk("initcall %pF returned %d after %Ld msecs\n",
+			fn, result,
 			(unsigned long long) delta.tv64 >> 20);
 	}
 
@@ -737,19 +744,20 @@ static void __init do_one_initcall(initcall_t fn)
 		local_irq_enable();
 	}
 	if (msgbuf[0]) {
-		print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn);
-		printk(" returned with %s\n", msgbuf);
+		printk("initcall %pF returned with %s\n", fn, msgbuf);
 	}
+
+	return result;
 }
 
 
-extern initcall_t __initcall_start[], __initcall_end[];
+extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[];
 
 static void __init do_initcalls(void)
 {
 	initcall_t *call;
 
-	for (call = __initcall_start; call < __initcall_end; call++)
+	for (call = __early_initcall_end; call < __initcall_end; call++)
 		do_one_initcall(*call);
 
 	/* Make sure there is no pending stuff from the initcall sequence */
@@ -765,6 +773,7 @@ static void __init do_initcalls(void)
  */
 static void __init do_basic_setup(void)
 {
+	rcu_init_sched(); /* needed by module_init stage. */
 	/* drivers will send hotplug events */
 	init_workqueues();
 	usermodehelper_init();
@@ -773,23 +782,12 @@ static void __init do_basic_setup(void)
 	do_initcalls();
 }
 
-static int __initdata nosoftlockup;
-
-static int __init nosoftlockup_setup(char *str)
-{
-	nosoftlockup = 1;
-	return 1;
-}
-__setup("nosoftlockup", nosoftlockup_setup);
-
 static void __init do_pre_smp_initcalls(void)
 {
-	extern int spawn_ksoftirqd(void);
+	initcall_t *call;
 
-	migration_init();
-	spawn_ksoftirqd();
-	if (!nosoftlockup)
-		spawn_softlockup_task();
+	for (call = __initcall_start; call < __early_initcall_end; call++)
+		do_one_initcall(*call);
 }
 
 static void run_init_process(char *init_filename)
diff --git a/init/version.c b/init/version.c
index 9d17d70ee02d..52a8b98642b8 100644
--- a/init/version.c
+++ b/init/version.c
@@ -13,10 +13,13 @@
 #include <linux/utsrelease.h>
 #include <linux/version.h>
 
+#ifndef CONFIG_KALLSYMS
 #define version(a) Version_ ## a
 #define version_string(a) version(a)
 
+extern int version_string(LINUX_VERSION_CODE);
 int version_string(LINUX_VERSION_CODE);
+#endif
 
 struct uts_namespace init_uts_ns = {
 	.kref = {