Merge branch 'linus' into perfcounters/core-v2

Merge reason: we have gathered quite a few conflicts, need to merge upstream

Conflicts:
	arch/powerpc/kernel/Makefile
	arch/x86/ia32/ia32entry.S
	arch/x86/include/asm/hardirq.h
	arch/x86/include/asm/unistd_32.h
	arch/x86/include/asm/unistd_64.h
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/irq.c
	arch/x86/kernel/syscall_table_32.S
	arch/x86/mm/iomap_32.c
	include/linux/sched.h
	kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>

7 files changed, 248 insertions, 263 deletions

diff --git a/init/Kconfig b/init/Kconfig
index 5a3ad5c20e2b..38a2ecd47c37 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -101,6 +101,66 @@ config LOCALVERSION_AUTO
 
 	  which is done within the script "scripts/setlocalversion".)
 
+config HAVE_KERNEL_GZIP
+	bool
+
+config HAVE_KERNEL_BZIP2
+	bool
+
+config HAVE_KERNEL_LZMA
+	bool
+
+choice
+	prompt "Kernel compression mode"
+	default KERNEL_GZIP
+	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
+	help
+	  The linux kernel is a kind of self-extracting executable.
+	  Several compression algorithms are available, which differ
+	  in efficiency, compression and decompression speed.
+	  Compression speed is only relevant when building a kernel.
+	  Decompression speed is relevant at each boot.
+
+	  If you have any problems with bzip2 or lzma compressed
+	  kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
+	  version of this functionality (bzip2 only), for 2.4, was
+	  supplied by Christian Ludwig)
+
+	  High compression options are mostly useful for users, who
+	  are low on disk space (embedded systems), but for whom ram
+	  size matters less.
+
+	  If in doubt, select 'gzip'
+
+config KERNEL_GZIP
+	bool "Gzip"
+	depends on HAVE_KERNEL_GZIP
+	help
+	  The old and tried gzip compression. Its compression ratio is
+	  the poorest among the 3 choices; however its speed (both
+	  compression and decompression) is the fastest.
+
+config KERNEL_BZIP2
+	bool "Bzip2"
+	depends on HAVE_KERNEL_BZIP2
+	help
+	  Its compression ratio and speed is intermediate.
+	  Decompression speed is slowest among the three.  The kernel
+	  size is about 10% smaller with bzip2, in comparison to gzip.
+	  Bzip2 uses a large amount of memory. For modern kernels you
+	  will need at least 8MB RAM or more for booting.
+
+config KERNEL_LZMA
+	bool "LZMA"
+	depends on HAVE_KERNEL_LZMA
+	help
+	  The most recent compression algorithm.
+	  Its ratio is best, decompression speed is between the other
+	  two. Compression is slowest.	The kernel size is about 33%
+	  smaller with LZMA in comparison to gzip.
+
+endchoice
+
 config SWAP
 	bool "Support for paging of anonymous memory (swap)"
 	depends on MMU && BLOCK
@@ -471,7 +531,7 @@ config CGROUP_DEVICE
 
 config CPUSETS
 	bool "Cpuset support"
-	depends on SMP && CGROUPS
+	depends on CGROUPS
 	help
 	  This option will let you create and manage CPUSETs which
 	  allow dynamically partitioning a system into sets of CPUs and
@@ -505,7 +565,7 @@ config CGROUP_MEM_RES_CTLR
 	select MM_OWNER
 	help
 	  Provides a memory resource controller that manages both anonymous
-	  memory and page cache. (See Documentation/controllers/memory.txt)
+	  memory and page cache. (See Documentation/cgroups/memory.txt)
 
 	  Note that setting this option increases fixed memory overhead
 	  associated with each page of memory in the system. By this,
@@ -537,6 +597,8 @@ config CGROUP_MEM_RES_CTLR_SWAP
 	  is disabled by boot option, this will be automatically disabled and
 	  there will be no overhead from this. Even when you set this config=y,
 	  if boot option "noswapaccount" is set, swap will not be accounted.
+	  Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
+	  size is 4096bytes, 512k per 1Gbytes of swap.
 
 endif # CGROUPS
 
@@ -627,7 +689,7 @@ config PID_NS
 	depends on NAMESPACES && EXPERIMENTAL
 	help
 	  Support process id namespaces.  This allows having multiple
-	  process with the same pid as long as they are in different
+	  processes with the same pid as long as they are in different
 	  pid namespaces.  This is a building block of containers.
 
 	  Unless you want to work with an experimental feature
@@ -675,6 +737,9 @@ config CC_OPTIMIZE_FOR_SIZE
 config SYSCTL
 	bool
 
+config ANON_INODES
+	bool
+
 menuconfig EMBEDDED
 	bool "Configure standard kernel features (for small systems)"
 	help
@@ -780,18 +845,6 @@ config PCSPKR_PLATFORM
           This option allows to disable the internal PC-Speaker
           support, saving some memory.
 
-config COMPAT_BRK
-	bool "Disable heap randomization"
-	default y
-	help
-	  Randomizing heap placement makes heap exploits harder, but it
-	  also breaks ancient binaries (including anything libc5 based).
-	  This option changes the bootup default to heap randomization
-	  disabled, and can be overriden runtime by setting
-	  /proc/sys/kernel/randomize_va_space to 2.
-
-	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
-
 config BASE_FULL
 	default y
 	bool "Enable full-sized data structures for core" if EMBEDDED
@@ -809,9 +862,6 @@ config FUTEX
 	  support for "fast userspace mutexes".  The resulting kernel may not
 	  run glibc-based applications correctly.
 
-config ANON_INODES
-	bool
-
 config EPOLL
 	bool "Enable eventpoll support" if EMBEDDED
 	default y
@@ -927,6 +977,18 @@ config SLUB_DEBUG
 	  SLUB sysfs support. /sys/slab will not exist and there will be
 	  no support for cache validation etc.
 
+config COMPAT_BRK
+	bool "Disable heap randomization"
+	default y
+	help
+	  Randomizing heap placement makes heap exploits harder, but it
+	  also breaks ancient binaries (including anything libc5 based).
+	  This option changes the bootup default to heap randomization
+	  disabled, and can be overridden at runtime by setting
+	  /proc/sys/kernel/randomize_va_space to 2.
+
+	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
 choice
 	prompt "Choose SLAB allocator"
 	default SLUB
@@ -975,13 +1037,25 @@ config TRACEPOINTS
 
 config MARKERS
 	bool "Activate markers"
-	depends on TRACEPOINTS
+	select TRACEPOINTS
 	help
 	  Place an empty function call at each marker site. Can be
 	  dynamically changed for a probe function.
 
 source "arch/Kconfig"
 
+config SLOW_WORK
+	default n
+	bool "Enable slow work thread pool"
+	help
+	  The slow work thread pool provides a number of dynamically allocated
+	  threads that can be used by the kernel to perform operations that
+	  take a relatively long time.
+
+	  An example of this would be CacheFiles doing a path lookup followed
+	  by a series of mkdirs and a create call, all of which have to touch
+	  disk.
+
 endmenu		# General setup
 
 config HAVE_GENERIC_DMA_COHERENT
@@ -996,7 +1070,6 @@ config SLABINFO
 
 config RT_MUTEXES
 	boolean
-	select PLIST
 
 config BASE_SMALL
 	int
@@ -1081,7 +1154,7 @@ config INIT_ALL_POSSIBLE
 	  cpu_possible_map, some of them chose to initialize cpu_possible_map
 	  with all 1s, and others with all 0s.  When they were centralised,
 	  it was better to provide this option than to break all the archs
-	  and have several arch maintainers persuing me down dark alleys.
+	  and have several arch maintainers pursuing me down dark alleys.
 
 config STOP_MACHINE
 	bool
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 8d4ff5afc1d8..dd7ee5f203f3 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -14,6 +14,7 @@
 #include <linux/fs.h>
 #include <linux/initrd.h>
 #include <linux/async.h>
+#include <linux/fs_struct.h>
 
 #include <linux/nfs_fs.h>
 #include <linux/nfs_fs_sb.h>
diff --git a/init/do_mounts.h b/init/do_mounts.h
index 9aa968d54329..f5b978a9bb92 100644
--- a/init/do_mounts.h
+++ b/init/do_mounts.h
@@ -1,4 +1,5 @@
 #include <linux/kernel.h>
+#include <linux/blkdev.h>
 #include <linux/init.h>
 #include <linux/syscalls.h>
 #include <linux/unistd.h>
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
index 9bdddbcb3d6a..69aebbf8fd2d 100644
--- a/init/do_mounts_md.c
+++ b/init/do_mounts_md.c
@@ -1,5 +1,6 @@
 #include <linux/delay.h>
-#include <linux/raid/md.h>
+#include <linux/raid/md_u.h>
+#include <linux/raid/md_p.h>
 
 #include "do_mounts.h"
 
@@ -112,8 +113,6 @@ static int __init md_setup(char *str)
 	return 1;
 }
 
-#define MdpMinorShift 6
-
 static void __init md_setup_drive(void)
 {
 	int minor, i, ent, partitioned;
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index 0f0f0cf3ba9a..027a402708de 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -11,6 +11,9 @@
 #include "do_mounts.h"
 #include "../fs/squashfs/squashfs_fs.h"
 
+#include <linux/decompress/generic.h>
+
+
 int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
 
 static int __init prompt_ramdisk(char *str)
@@ -29,7 +32,7 @@ static int __init ramdisk_start_setup(char *str)
 }
 __setup("ramdisk_start=", ramdisk_start_setup);
 
-static int __init crd_load(int in_fd, int out_fd);
+static int __init crd_load(int in_fd, int out_fd, decompress_fn deco);
 
 /*
  * This routine tries to find a RAM disk image to load, and returns the
@@ -38,15 +41,15 @@ static int __init crd_load(int in_fd, int out_fd);
  * numbers could not be found.
  *
  * We currently check for the following magic numbers:
- * 	minix
- * 	ext2
+ *	minix
+ *	ext2
  *	romfs
  *	cramfs
  *	squashfs
- * 	gzip
+ *	gzip
  */
-static int __init 
-identify_ramdisk_image(int fd, int start_block)
+static int __init
+identify_ramdisk_image(int fd, int start_block, decompress_fn *decompressor)
 {
 	const int size = 512;
 	struct minix_super_block *minixsb;
@@ -56,6 +59,7 @@ identify_ramdisk_image(int fd, int start_block)
 	struct squashfs_super_block *squashfsb;
 	int nblocks = -1;
 	unsigned char *buf;
+	const char *compress_name;
 
 	buf = kmalloc(size, GFP_KERNEL);
 	if (!buf)
@@ -69,18 +73,19 @@ identify_ramdisk_image(int fd, int start_block)
 	memset(buf, 0xe5, size);
 
 	/*
-	 * Read block 0 to test for gzipped kernel
+	 * Read block 0 to test for compressed kernel
 	 */
 	sys_lseek(fd, start_block * BLOCK_SIZE, 0);
 	sys_read(fd, buf, size);
 
-	/*
-	 * If it matches the gzip magic numbers, return 0
-	 */
-	if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) {
-		printk(KERN_NOTICE
-		       "RAMDISK: Compressed image found at block %d\n",
-		       start_block);
+	*decompressor = decompress_method(buf, size, &compress_name);
+	if (compress_name) {
+		printk(KERN_NOTICE "RAMDISK: %s image found at block %d\n",
+		       compress_name, start_block);
+		if (!*decompressor)
+			printk(KERN_EMERG
+			       "RAMDISK: %s decompressor not configured!\n",
+			       compress_name);
 		nblocks = 0;
 		goto done;
 	}
@@ -142,7 +147,7 @@ identify_ramdisk_image(int fd, int start_block)
 	printk(KERN_NOTICE
 	       "RAMDISK: Couldn't find valid RAM disk image starting at %d.\n",
 	       start_block);
-	
+
 done:
 	sys_lseek(fd, start_block * BLOCK_SIZE, 0);
 	kfree(buf);
@@ -157,6 +162,7 @@ int __init rd_load_image(char *from)
 	int nblocks, i, disk;
 	char *buf = NULL;
 	unsigned short rotate = 0;
+	decompress_fn decompressor = NULL;
 #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES)
 	char rotator[4] = { '|' , '/' , '-' , '\\' };
 #endif
@@ -169,12 +175,12 @@ int __init rd_load_image(char *from)
 	if (in_fd < 0)
 		goto noclose_input;
 
-	nblocks = identify_ramdisk_image(in_fd, rd_image_start);
+	nblocks = identify_ramdisk_image(in_fd, rd_image_start, &decompressor);
 	if (nblocks < 0)
 		goto done;
 
 	if (nblocks == 0) {
-		if (crd_load(in_fd, out_fd) == 0)
+		if (crd_load(in_fd, out_fd, decompressor) == 0)
 			goto successful_load;
 		goto done;
 	}
@@ -200,7 +206,7 @@ int __init rd_load_image(char *from)
 		       nblocks, rd_blocks);
 		goto done;
 	}
-		
+
 	/*
 	 * OK, time to copy in the data
 	 */
@@ -273,138 +279,48 @@ int __init rd_load_disk(int n)
 	return rd_load_image("/dev/root");
 }
 
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-
-#ifndef memzero
-#define memzero(s, n)     memset ((s), 0, (n))
-#endif
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define INBUFSIZ 4096
-#define WSIZE 0x8000    /* window size--must be a power of two, and */
-			/*  at least 32K for zip's deflate method */
-
-static uch *inbuf;
-static uch *window;
-
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
 static int exit_code;
-static int unzip_error;
-static long bytes_out;
+static int decompress_error;
 static int crd_infd, crd_outfd;
 
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-		
-/* Diagnostic functions (stubbed out) */
-#define Assert(cond,msg)
-#define Trace(x)
-#define Tracev(x)
-#define Tracevv(x)
-#define Tracec(c,x)
-#define Tracecv(c,x)
-
-#define STATIC static
-#define INIT __init
-
-static int  __init fill_inbuf(void);
-static void __init flush_window(void);
-static void __init error(char *m);
-
-#define NO_INFLATE_MALLOC
-
-#include "../lib/inflate.c"
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- * Returning -1 does not guarantee that gunzip() will ever return.
- */
-static int __init fill_inbuf(void)
+static int __init compr_fill(void *buf, unsigned int len)
 {
-	if (exit_code) return -1;
-	
-	insize = sys_read(crd_infd, inbuf, INBUFSIZ);
-	if (insize == 0) {
-		error("RAMDISK: ran out of compressed data");
-		return -1;
-	}
-
-	inptr = 1;
-
-	return inbuf[0];
+	int r = sys_read(crd_infd, buf, len);
+	if (r < 0)
+		printk(KERN_ERR "RAMDISK: error while reading compressed data");
+	else if (r == 0)
+		printk(KERN_ERR "RAMDISK: EOF while reading compressed data");
+	return r;
 }
 
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void __init flush_window(void)
+static int __init compr_flush(void *window, unsigned int outcnt)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n, written;
-    uch *in, ch;
-    
-    written = sys_write(crd_outfd, window, outcnt);
-    if (written != outcnt && unzip_error == 0) {
-	printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n",
-	       written, outcnt, bytes_out);
-	unzip_error = 1;
-    }
-    in = window;
-    for (n = 0; n < outcnt; n++) {
-	    ch = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    outcnt = 0;
+	int written = sys_write(crd_outfd, window, outcnt);
+	if (written != outcnt) {
+		if (decompress_error == 0)
+			printk(KERN_ERR
+			       "RAMDISK: incomplete write (%d != %d)\n",
+			       written, outcnt);
+		decompress_error = 1;
+		return -1;
+	}
+	return outcnt;
 }
 
 static void __init error(char *x)
 {
 	printk(KERN_ERR "%s\n", x);
 	exit_code = 1;
-	unzip_error = 1;
+	decompress_error = 1;
 }
 
-static int __init crd_load(int in_fd, int out_fd)
+static int __init crd_load(int in_fd, int out_fd, decompress_fn deco)
 {
 	int result;
-
-	insize = 0;		/* valid bytes in inbuf */
-	inptr = 0;		/* index of next byte to be processed in inbuf */
-	outcnt = 0;		/* bytes in output buffer */
-	exit_code = 0;
-	bytes_out = 0;
-	crc = (ulg)0xffffffffL; /* shift register contents */
-
 	crd_infd = in_fd;
 	crd_outfd = out_fd;
-	inbuf = kmalloc(INBUFSIZ, GFP_KERNEL);
-	if (!inbuf) {
-		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
-		return -1;
-	}
-	window = kmalloc(WSIZE, GFP_KERNEL);
-	if (!window) {
-		printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
-		kfree(inbuf);
-		return -1;
-	}
-	makecrc();
-	result = gunzip();
-	if (unzip_error)
+	result = deco(NULL, 0, compr_fill, compr_flush, NULL, NULL, error);
+	if (decompress_error)
 		result = 1;
-	kfree(inbuf);
-	kfree(window);
 	return result;
 }
diff --git a/init/initramfs.c b/init/initramfs.c
index d9c941c0c3ca..80cd713f6cc5 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -5,6 +5,7 @@
 #include <linux/fcntl.h>
 #include <linux/delay.h>
 #include <linux/string.h>
+#include <linux/dirent.h>
 #include <linux/syscalls.h>
 #include <linux/utime.h>
 
@@ -166,8 +167,6 @@ static __initdata char *victim;
 static __initdata unsigned count;
 static __initdata loff_t this_header, next_header;
 
-static __initdata int dry_run;
-
 static inline void __init eat(unsigned n)
 {
 	victim += n;
@@ -229,10 +228,6 @@ static int __init do_header(void)
 	parse_header(collected);
 	next_header = this_header + N_ALIGN(name_len) + body_len;
 	next_header = (next_header + 3) & ~3;
-	if (dry_run) {
-		read_into(name_buf, N_ALIGN(name_len), GotName);
-		return 0;
-	}
 	state = SkipIt;
 	if (name_len <= 0 || name_len > PATH_MAX)
 		return 0;
@@ -303,8 +298,6 @@ static int __init do_name(void)
 		free_hash();
 		return 0;
 	}
-	if (dry_run)
-		return 0;
 	clean_path(collected, mode);
 	if (S_ISREG(mode)) {
 		int ml = maybe_link();
@@ -390,11 +383,13 @@ static int __init write_buffer(char *buf, unsigned len)
 	return len - count;
 }
 
-static void __init flush_buffer(char *buf, unsigned len)
+static int __init flush_buffer(void *bufv, unsigned len)
 {
+	char *buf = (char *) bufv;
 	int written;
+	int origLen = len;
 	if (message)
-		return;
+		return -1;
 	while ((written = write_buffer(buf, len)) < len && !message) {
 		char c = buf[written];
 		if (c == '0') {
@@ -408,84 +403,27 @@ static void __init flush_buffer(char *buf, unsigned len)
 		} else
 			error("junk in compressed archive");
 	}
+	return origLen;
 }
 
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-
-#ifndef memzero
-#define memzero(s, n)     memset ((s), 0, (n))
-#endif
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
+static unsigned my_inptr;   /* index of next byte to be processed in inbuf */
 
-#define WSIZE 0x8000    /* window size--must be a power of two, and */
-			/*  at least 32K for zip's deflate method */
-
-static uch *inbuf;
-static uch *window;
-
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
-static long bytes_out;
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : -1)
-		
-/* Diagnostic functions (stubbed out) */
-#define Assert(cond,msg)
-#define Trace(x)
-#define Tracev(x)
-#define Tracevv(x)
-#define Tracec(c,x)
-#define Tracecv(c,x)
-
-#define STATIC static
-#define INIT __init
-
-static void __init flush_window(void);
-static void __init error(char *m);
-
-#define NO_INFLATE_MALLOC
-
-#include "../lib/inflate.c"
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void __init flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, ch;
-
-	flush_buffer(window, outcnt);
-	in = window;
-	for (n = 0; n < outcnt; n++) {
-		ch = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	outcnt = 0;
-}
+#include <linux/decompress/generic.h>
 
-static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
+static char * __init unpack_to_rootfs(char *buf, unsigned len)
 {
 	int written;
-	dry_run = check_only;
+	decompress_fn decompress;
+	const char *compress_name;
+	static __initdata char msg_buf[64];
+
 	header_buf = kmalloc(110, GFP_KERNEL);
 	symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL);
 	name_buf = kmalloc(N_ALIGN(PATH_MAX), GFP_KERNEL);
-	window = kmalloc(WSIZE, GFP_KERNEL);
-	if (!window || !header_buf || !symlink_buf || !name_buf)
+
+	if (!header_buf || !symlink_buf || !name_buf)
 		panic("can't allocate buffers");
+
 	state = Start;
 	this_header = 0;
 	message = NULL;
@@ -505,22 +443,25 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only)
 			continue;
 		}
 		this_header = 0;
-		insize = len;
-		inbuf = buf;
-		inptr = 0;
-		outcnt = 0;		/* bytes in output buffer */
-		bytes_out = 0;
-		crc = (ulg)0xffffffffL; /* shift register contents */
-		makecrc();
-		gunzip();
+		decompress = decompress_method(buf, len, &compress_name);
+		if (decompress)
+			decompress(buf, len, NULL, flush_buffer, NULL,
+				   &my_inptr, error);
+		else if (compress_name) {
+			if (!message) {
+				snprintf(msg_buf, sizeof msg_buf,
+					 "compression method %s not configured",
+					 compress_name);
+				message = msg_buf;
+			}
+		}
 		if (state != Reset)
-			error("junk in gzipped archive");
-		this_header = saved_offset + inptr;
-		buf += inptr;
-		len -= inptr;
+			error("junk in compressed archive");
+		this_header = saved_offset + my_inptr;
+		buf += my_inptr;
+		len -= my_inptr;
 	}
 	dir_utime();
-	kfree(window);
 	kfree(name_buf);
 	kfree(symlink_buf);
 	kfree(header_buf);
@@ -574,26 +515,76 @@ skip:
 	initrd_end = 0;
 }
 
+#define BUF_SIZE 1024
+static void __init clean_rootfs(void)
+{
+	int fd;
+	void *buf;
+	struct linux_dirent64 *dirp;
+	int count;
+
+	fd = sys_open("/", O_RDONLY, 0);
+	WARN_ON(fd < 0);
+	if (fd < 0)
+		return;
+	buf = kzalloc(BUF_SIZE, GFP_KERNEL);
+	WARN_ON(!buf);
+	if (!buf) {
+		sys_close(fd);
+		return;
+	}
+
+	dirp = buf;
+	count = sys_getdents64(fd, dirp, BUF_SIZE);
+	while (count > 0) {
+		while (count > 0) {
+			struct stat st;
+			int ret;
+
+			ret = sys_newlstat(dirp->d_name, &st);
+			WARN_ON_ONCE(ret);
+			if (!ret) {
+				if (S_ISDIR(st.st_mode))
+					sys_rmdir(dirp->d_name);
+				else
+					sys_unlink(dirp->d_name);
+			}
+
+			count -= dirp->d_reclen;
+			dirp = (void *)dirp + dirp->d_reclen;
+		}
+		dirp = buf;
+		memset(buf, 0, BUF_SIZE);
+		count = sys_getdents64(fd, dirp, BUF_SIZE);
+	}
+
+	sys_close(fd);
+	kfree(buf);
+}
+
 static int __init populate_rootfs(void)
 {
 	char *err = unpack_to_rootfs(__initramfs_start,
-			 __initramfs_end - __initramfs_start, 0);
+			 __initramfs_end - __initramfs_start);
 	if (err)
-		panic(err);
+		panic(err);	/* Failed to decompress INTERNAL initramfs */
 	if (initrd_start) {
 #ifdef CONFIG_BLK_DEV_RAM
 		int fd;
-		printk(KERN_INFO "checking if image is initramfs...");
+		printk(KERN_INFO "checking if image is initramfs...\n");
 		err = unpack_to_rootfs((char *)initrd_start,
-			initrd_end - initrd_start, 1);
+			initrd_end - initrd_start);
 		if (!err) {
-			printk(" it is\n");
-			unpack_to_rootfs((char *)initrd_start,
-				initrd_end - initrd_start, 0);
+			printk(KERN_INFO "rootfs image is initramfs; unpacking...\n");
 			free_initrd();
 			return 0;
+		} else {
+			clean_rootfs();
+			unpack_to_rootfs(__initramfs_start,
+				 __initramfs_end - __initramfs_start);
 		}
-		printk("it isn't (%s); looks like an initrd\n", err);
+		printk(KERN_INFO "rootfs image is not initramfs (%s)"
+				"; looks like an initrd\n", err);
 		fd = sys_open("/initrd.image", O_WRONLY|O_CREAT, 0700);
 		if (fd >= 0) {
 			sys_write(fd, (char *)initrd_start,
@@ -604,10 +595,13 @@ static int __init populate_rootfs(void)
 #else
 		printk(KERN_INFO "Unpacking initramfs...");
 		err = unpack_to_rootfs((char *)initrd_start,
-			initrd_end - initrd_start, 0);
-		if (err)
-			panic(err);
-		printk(" done\n");
+			initrd_end - initrd_start);
+		if (err) {
+			printk(" failed!\n");
+			printk(KERN_EMERG "%s\n", err);
+		} else {
+			printk(" done\n");
+		}
 		free_initrd();
 #endif
 	}
diff --git a/init/main.c b/init/main.c
index 6bf83afd654d..3585f073d636 100644
--- a/init/main.c
+++ b/init/main.c
@@ -71,6 +71,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/cacheflush.h>
+#include <trace/kmemtrace.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/smp.h>
@@ -407,8 +408,7 @@ static void __init smp_init(void)
 	 * Set up the current CPU as possible to migrate to.
 	 * The other ones will be done by cpu_up/cpu_down()
 	 */
-	cpu = smp_processor_id();
-	cpu_set(cpu, cpu_active_map);
+	set_cpu_active(smp_processor_id(), true);
 
 	/* FIXME: This should be done in userspace --RR */
 	for_each_present_cpu(cpu) {
@@ -649,6 +649,7 @@ asmlinkage void __init start_kernel(void)
 	enable_debug_pagealloc();
 	cpu_hotplug_init();
 	kmem_cache_init();
+	kmemtrace_init();
 	debug_objects_mem_init();
 	idr_init_cache();
 	setup_per_cpu_pageset();
@@ -770,6 +771,7 @@ static void __init do_basic_setup(void)
 {
 	rcu_init_sched(); /* needed by module_init stage. */
 	init_workqueues();
+	cpuset_init_smp();
 	usermodehelper_init();
 	driver_init();
 	init_irq_proc();
@@ -794,6 +796,7 @@ static void run_init_process(char *init_filename)
  * makes it inline to init() and it becomes part of init.text section
  */
 static noinline int init_post(void)
+	__releases(kernel_lock)
 {
 	/* need to finish all async __init code before freeing the memory */
 	async_synchronize_full();
@@ -842,7 +845,7 @@ static int __init kernel_init(void * unused)
 	/*
 	 * init can run on any cpu.
 	 */
-	set_cpus_allowed_ptr(current, CPU_MASK_ALL_PTR);
+	set_cpus_allowed_ptr(current, cpu_all_mask);
 	/*
 	 * Tell the world that we're going to be the grim
 	 * reaper of innocent orphaned children.
@@ -863,8 +866,6 @@ static int __init kernel_init(void * unused)
 	smp_init();
 	sched_init_smp();
 
-	cpuset_init_smp();
-
 	do_basic_setup();
 
 	/*