Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...

8 files changed, 218 insertions, 0 deletions

diff --git a/tools/testing/selftests/powerpc/copyloops/Makefile b/tools/testing/selftests/powerpc/copyloops/Makefile
new file mode 100644
index 000000000000..6f2d3be227f9
--- /dev/null
+++ b/tools/testing/selftests/powerpc/copyloops/Makefile
@@ -0,0 +1,29 @@
+# The loops are all 64-bit code
+CFLAGS += -m64
+CFLAGS += -I$(CURDIR)
+CFLAGS += -D SELFTEST
+
+# Use our CFLAGS for the implicit .S rule
+ASFLAGS = $(CFLAGS)
+
+PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7
+EXTRA_SOURCES := validate.c ../harness.c
+
+all: $(PROGS)
+
+copyuser_64:     CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_base
+copyuser_power7: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_power7
+memcpy_64:       CPPFLAGS += -D COPY_LOOP=test_memcpy
+memcpy_power7:   CPPFLAGS += -D COPY_LOOP=test_memcpy_power7
+
+$(PROGS): $(EXTRA_SOURCES)
+
+run_tests: all
+	@-for PROG in $(PROGS); do \
+		./$$PROG; \
+	done;
+
+clean:
+	rm -f $(PROGS) *.o
+
+.PHONY: all run_tests clean
diff --git a/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h
new file mode 100644
index 000000000000..ccd9c84c4e3f
--- /dev/null
+++ b/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h
@@ -0,0 +1,86 @@
+#include <ppc-asm.h>
+
+#define CONFIG_ALTIVEC
+
+#define r1	1
+
+#define vr0     0
+#define vr1     1
+#define vr2     2
+#define vr3     3
+#define vr4     4
+#define vr5     5
+#define vr6     6
+#define vr7     7
+#define vr8     8
+#define vr9     9
+#define vr10    10
+#define vr11    11
+#define vr12    12
+#define vr13    13
+#define vr14    14
+#define vr15    15
+#define vr16    16
+#define vr17    17
+#define vr18    18
+#define vr19    19
+#define vr20    20
+#define vr21    21
+#define vr22    22
+#define vr23    23
+#define vr24    24
+#define vr25    25
+#define vr26    26
+#define vr27    27
+#define vr28    28
+#define vr29    29
+#define vr30    30
+#define vr31    31
+
+#define R14 r14
+#define R15 r15
+#define R16 r16
+#define R17 r17
+#define R18 r18
+#define R19 r19
+#define R20 r20
+#define R21 r21
+#define R22 r22
+
+#define STACKFRAMESIZE	256
+#define STK_PARAM(i)	(48 + ((i)-3)*8)
+#define STK_REG(i)	(112 + ((i)-14)*8)
+
+#define _GLOBAL(A) FUNC_START(test_ ## A)
+
+#define PPC_MTOCRF(A, B)	mtocrf A, B
+
+FUNC_START(enter_vmx_usercopy)
+	li	r3,1
+	blr
+
+FUNC_START(exit_vmx_usercopy)
+	li	r3,0
+	blr
+
+FUNC_START(enter_vmx_copy)
+	li	r3,1
+	blr
+
+FUNC_START(exit_vmx_copy)
+	blr
+
+FUNC_START(memcpy_power7)
+	blr
+
+FUNC_START(__copy_tofrom_user_power7)
+	blr
+
+FUNC_START(__copy_tofrom_user_base)
+	blr
+
+#define BEGIN_FTR_SECTION
+#define FTR_SECTION_ELSE
+#define ALT_FTR_SECTION_END_IFCLR(x)
+#define ALT_FTR_SECTION_END(x, y)
+#define END_FTR_SECTION_IFCLR(x)
diff --git a/tools/testing/selftests/powerpc/copyloops/asm/processor.h b/tools/testing/selftests/powerpc/copyloops/asm/processor.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/tools/testing/selftests/powerpc/copyloops/asm/processor.h
diff --git a/tools/testing/selftests/powerpc/copyloops/copyuser_64.S b/tools/testing/selftests/powerpc/copyloops/copyuser_64.S
new file mode 120000
index 000000000000..f1c418a2521a
--- /dev/null
+++ b/tools/testing/selftests/powerpc/copyloops/copyuser_64.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/copyuser_64.S
\ No newline at end of file
diff --git a/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S b/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S
new file mode 120000
index 000000000000..478689598298
--- /dev/null
+++ b/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/copyuser_power7.S
\ No newline at end of file
diff --git a/tools/testing/selftests/powerpc/copyloops/memcpy_64.S b/tools/testing/selftests/powerpc/copyloops/memcpy_64.S
new file mode 120000
index 000000000000..cce33fb6f9d8
--- /dev/null
+++ b/tools/testing/selftests/powerpc/copyloops/memcpy_64.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/memcpy_64.S
\ No newline at end of file
diff --git a/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S b/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S
new file mode 120000
index 000000000000..0d6fbfaf3d59
--- /dev/null
+++ b/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/memcpy_power7.S
\ No newline at end of file
diff --git a/tools/testing/selftests/powerpc/copyloops/validate.c b/tools/testing/selftests/powerpc/copyloops/validate.c
new file mode 100644
index 000000000000..1750ff57ee58
--- /dev/null
+++ b/tools/testing/selftests/powerpc/copyloops/validate.c
@@ -0,0 +1,99 @@
+#include <malloc.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdbool.h>
+
+#include "../utils.h"
+
+#define MAX_LEN 8192
+#define MAX_OFFSET 16
+#define MIN_REDZONE 128
+#define BUFLEN (MAX_LEN+MAX_OFFSET+2*MIN_REDZONE)
+#define POISON 0xa5
+
+unsigned long COPY_LOOP(void *to, const void *from, unsigned long size);
+
+static void do_one(char *src, char *dst, unsigned long src_off,
+		   unsigned long dst_off, unsigned long len, void *redzone,
+		   void *fill)
+{
+	char *srcp, *dstp;
+	unsigned long ret;
+	unsigned long i;
+
+	srcp = src + MIN_REDZONE + src_off;
+	dstp = dst + MIN_REDZONE + dst_off;
+
+	memset(src, POISON, BUFLEN);
+	memset(dst, POISON, BUFLEN);
+	memcpy(srcp, fill, len);
+
+	ret = COPY_LOOP(dstp, srcp, len);
+	if (ret && ret != (unsigned long)dstp) {
+		printf("(%p,%p,%ld) returned %ld\n", dstp, srcp, len, ret);
+		abort();
+	}
+
+	if (memcmp(dstp, srcp, len)) {
+		printf("(%p,%p,%ld) miscompare\n", dstp, srcp, len);
+		printf("src: ");
+		for (i = 0; i < len; i++)
+			printf("%02x ", srcp[i]);
+		printf("\ndst: ");
+		for (i = 0; i < len; i++)
+			printf("%02x ", dstp[i]);
+		printf("\n");
+		abort();
+	}
+
+	if (memcmp(dst, redzone, dstp - dst)) {
+		printf("(%p,%p,%ld) redzone before corrupted\n",
+		       dstp, srcp, len);
+		abort();
+	}
+
+	if (memcmp(dstp+len, redzone, dst+BUFLEN-(dstp+len))) {
+		printf("(%p,%p,%ld) redzone after corrupted\n",
+		       dstp, srcp, len);
+		abort();
+	}
+}
+
+int test_copy_loop(void)
+{
+	char *src, *dst, *redzone, *fill;
+	unsigned long len, src_off, dst_off;
+	unsigned long i;
+
+	src = memalign(BUFLEN, BUFLEN);
+	dst = memalign(BUFLEN, BUFLEN);
+	redzone = malloc(BUFLEN);
+	fill = malloc(BUFLEN);
+
+	if (!src || !dst || !redzone || !fill) {
+		fprintf(stderr, "malloc failed\n");
+		exit(1);
+	}
+
+	memset(redzone, POISON, BUFLEN);
+
+	/* Fill with sequential bytes */
+	for (i = 0; i < BUFLEN; i++)
+		fill[i] = i & 0xff;
+
+	for (len = 1; len < MAX_LEN; len++) {
+		for (src_off = 0; src_off < MAX_OFFSET; src_off++) {
+			for (dst_off = 0; dst_off < MAX_OFFSET; dst_off++) {
+				do_one(src, dst, src_off, dst_off, len,
+				       redzone, fill);
+			}
+		}
+	}
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(test_copy_loop, str(COPY_LOOP));
+}