diff options
| -rw-r--r-- | arch/arm64/boot/dts/qcom/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts | 1352 |
2 files changed, 0 insertions, 1353 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 512084804439..2f8aec2cc6db 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -84,7 +84,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts deleted file mode 100644 index 1779d96c30f6..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts +++ /dev/null @@ -1,1352 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Herobrine board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> -#include <dt-bindings/input/gpio-keys.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "sc7280.dtsi" - -/* PMICs depend on spmi_bus label and so must come after SoC */ -#include "pm7325.dtsi" -#include "pm8350c.dtsi" -#include "pmk8350.dtsi" - -#include "sc7280-chrome-common.dtsi" - -/ { - model = "Google Herobrine (rev0)"; - compatible = "google,herobrine-rev0", "qcom,sc7280"; -}; - -/ { - aliases { - serial0 = &uart5; - serial1 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* FIXED REGULATORS - parents above children */ - - /* This is the top level supply and variable voltage */ - ppvar_sys: ppvar-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "ppvar_sys"; - regulator-always-on; - regulator-boot-on; - }; - - /* This divides ppvar_sys by 2, so voltage is variable */ - src_vph_pwr: src-vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "src_vph_pwr"; - - /* EC turns on with switchcap_on; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&ppvar_sys>; - }; - - pp5000_s3: pp5000-s3-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp5000_s3"; - - /* EC turns on with en_pp5000_s3; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_z1: pp3300-z1-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_z1"; - - /* EC turns on with en_pp3300_z1; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_audio: - pp3300_codec: pp3300-codec-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_codec"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_codec>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_cam: - pp3300_edp: - pp3300_ts: pp3300-edp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_edp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_dx_edp>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_fp: - pp3300_fp_ls: - pp3300_mcu: pp3300-fp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_fp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-boot-on; - regulator-always-on; - - /* - * WARNING: it is intentional that GPIO 42 isn't listed here. - * The userspace script for updating the fingerprint firmware - * needs to control the FP regulators during a FW update, - * hence the signal can't be owned by the kernel regulator. - */ - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_hub: pp3300-hub-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_hub"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-boot-on; - regulator-always-on; - - gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_hub>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_tp: pp3300-tp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_tp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - /* AP turns on with PP1800_L18B_S0; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&pp3300_z1>; - }; - - pp2850_uf_cam: pp2850-uf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_uf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&uf_cam_en>; - - vin-supply = <&pp3300_cam>; - }; - - pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_vcm_wf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&wf_cam_en>; - - vin-supply = <&pp3300_cam>; - }; - - pp2850_wf_cam: pp2850-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_wf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp3300_cam>; - }; - - pp1800_fp: pp1800-fp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_fp"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - regulator-always-on; - - /* - * WARNING: it is intentional that GPIO 42 isn't listed here. - * The userspace script for updating the fingerprint firmware - * needs to control the FP regulators during a FW update, - * hence the signal can't be owned by the kernel regulator. - */ - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; - - vin-supply = <&pp1800_l18b_s0>; - status = "disabled"; - }; - - pp1800_uf_cam: pp1800-uf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_uf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&uf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1800_wf_cam: pp1800-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_wf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1200_wf_cam: pp1200-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1200_wf_cam"; - - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp1200_l6b>; - }; - - /* BOARD-SPECIFIC TOP LEVEL NODES */ - - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&pen_pdct_l>; - - pen_insert: pen-insert { - label = "Pen Insert"; - - /* Insert = low, eject = high */ - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - linux,code = <SW_PEN_INSERTED>; - linux,input-type = <EV_SW>; - wakeup-event-action = <EV_ACT_DEASSERTED>; - wakeup-source; - }; - }; - - pwmleds { - compatible = "pwm-leds"; - status = "disabled"; - keyboard_backlight: keyboard-backlight { - status = "disabled"; - label = "cros_ec::kbd_backlight"; - pwms = <&cros_ec_pwm 0>; - max-brightness = <1023>; - }; - }; -}; - -&apps_rsc { - pm7325-regulators { - compatible = "qcom,pm7325-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd19_pmu_pcie_i: - vdd19_pmu_rfa_i: - vreg_s1b_wlan: - vreg_s1b: smps1 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2040000>; - }; - - vdd_pmu_aon_i: - vreg_s7b_wlan: - vreg_s7b: smps7 { - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - }; - - vdd13_pmu_pcie_i: - vdd13_pmu_rfa_i: - vreg_s8b_wlan: - vreg_s8b: smps8 { - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1500000>; - }; - - vdda_usb_ss_dp_core: - vreg_l1b: ldo1 { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <925000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdda_usb_hs0_3p1: - vreg_l2b: ldo2 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1200_l6b: - vdd_ufs_1p2: - vdd_vref: - vdda_csi01_1p2: - vdda_csi23_1p2: - vdda_csi4_1p2: - vdda_dsi0_1p2: - vdda_pcie0_1p2: - vdda_pcie1_1p2: - vdda_usb_ss_dp_1p2: - vdda_qlink0_1p2_ck: - vdda_qlink1_1p2_ck: - vreg_l6b_1p2: - vreg_l6b: ldo6 { - regulator-min-microvolt = <1120000>; - regulator-max-microvolt = <1408000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l7b: - vreg_l7b: ldo7 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - codec_vcc: - pp1800_l18b_s0: - pp1800_ts: - vdd1: - vddpx_0: - vddpx_3: - vddpx_7: - vreg_l18b: ldo18 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_l19b: - vddpx_ts: - vddpx_wl4otp: - vreg_l19b: ldo19 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - pm8350c-regulators { - compatible = "qcom,pm8350c-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_s1c: smps1 { - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vddpx_1: - vreg_s9c: smps9 { - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - }; - - pp1800_l1c: - pp1800_pen: - vdd_a_gfx_cs_1p1: - vdd_a_cxo_1p8: - vdd_qfprom: - vdda_apc_cs_1p8: - vdda_qrefs_1p8: - vdda_turing_q6_cs_1p8: - vdda_usb_hs0_1p8: - vreg_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - dmic_vdd: - pp1800_alc5682: - pp1800_l2c: - pp1800_vreg_alc5682: - vreg_l2c: ldo2 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_sar: - pp3300_sensor: - vreg_l3c: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ppvar_uim1: - vddpx_5: - vreg_l4c: ldo4 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l5c: - uim_vcc: - vddpx_6: - vreg_l5c: ldo5 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ppvar_l6c: - vddpx_2: - vreg_l6c: ldo6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7c: ldo7 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_prox: - pp1800_sar: - vreg_l8c: ldo8 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l9c: - vreg_l9c: ldo9 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdd_a_gnss_0p9: - vdd_ufs_core: - vdd_usb_hs0_core: - vdd_vref_0p9: - vdda_csi01_0p9: - vdda_csi23_0p9: - vdda_csi4_0p9: - vdda_dsi0_pll_0p9: - vdda_dsi0_0p9: - vdda_pcie0_core: - vdda_pcie1_core: - vdda_qlink0_0p9: - vdda_qlink1_0p9: - vdda_qlink0_0p9_ck: - vdda_qlink1_0p9_ck: - vdda_qrefs_0p875: - vreg_l10c_0p8: - vreg_l10c: ldo10 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2800_l11c: - vreg_l11c: ldo11 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_l12c: - vreg_l12c: ldo12 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_l13c: - vreg_l13c: ldo13 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_bob: bob { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; - }; - }; -}; - -ap_tp_i2c: &i2c1 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@15 { - compatible = "elan,ekth3000"; - reg = <0x15>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <102 IRQ_TYPE_EDGE_FALLING>; - - vcc-supply = <&pp3300_z1>; - - wakeup-source; - }; -}; - -ap_h1_i2c: &i2c12 { - status = "okay"; - clock-frequency = <400000>; - - tpm@50 { - compatible = "google,cr50"; - reg = <0x50>; - - pinctrl-names = "default"; - pinctrl-0 = <&h1_ap_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_EDGE_RISING>; - }; -}; - -ap_ts_pen: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <81 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - }; -}; - -&pm7325_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_rtc { - status = "disabled"; -}; - -&pmk8350_vadc { - pmk8350_die_temp { - reg = <PMK8350_ADC7_DIE_TEMP>; - label = "pmk8350_die_temp"; - qcom,pre-scaling = <1 1>; - }; - - pmr735a_die_temp { - reg = <PMR735A_ADC7_DIE_TEMP>; - label = "pmr735a_die_temp"; - qcom,pre-scaling = <1 1>; - }; -}; - -&qfprom { - vcc-supply = <&vdd_qfprom>; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - vmmc-supply = <&pp2950_l7b>; - vqmmc-supply = <&pp1800_l19b>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; - pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; - vmmc-supply = <&pp2950_l9c>; - vqmmc-supply = <&ppvar_l6c>; - - cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; -}; - -ap_ec_spi: &spi8 { - status = "okay"; - - pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; - cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0>; - interrupt-parent = <&tlmm>; - interrupts = <142 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ap_ec_int_l>; - spi-max-frequency = <3000000>; - - cros_ec_pwm: pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - - i2c_tunnel: i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - google,remote-bus = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - typec { - compatible = "google,cros-ec-typec"; - #address-cells = <1>; - #size-cells = <0>; - - usb_c0: connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - label = "left"; - power-role = "dual"; - data-role = "host"; - try-power-role = "source"; - }; - - usb_c1: connector@1 { - compatible = "usb-c-connector"; - reg = <1>; - label = "right"; - power-role = "dual"; - data-role = "host"; - try-power-role = "source"; - }; - }; - }; -}; - -#include <arm/cros-ec-keyboard.dtsi> -#include <arm/cros-ec-sbs.dtsi> - -&keyboard_controller { - function-row-physmap = < - MATRIX_KEY(0x00, 0x02, 0) /* T1 */ - MATRIX_KEY(0x03, 0x02, 0) /* T2 */ - MATRIX_KEY(0x02, 0x02, 0) /* T3 */ - MATRIX_KEY(0x01, 0x02, 0) /* T4 */ - MATRIX_KEY(0x03, 0x04, 0) /* T5 */ - MATRIX_KEY(0x02, 0x04, 0) /* T6 */ - MATRIX_KEY(0x01, 0x04, 0) /* T7 */ - MATRIX_KEY(0x02, 0x09, 0) /* T8 */ - MATRIX_KEY(0x01, 0x09, 0) /* T9 */ - MATRIX_KEY(0x00, 0x04, 0) /* T10 */ - >; - linux,keymap = < - MATRIX_KEY(0x00, 0x02, KEY_BACK) - MATRIX_KEY(0x03, 0x02, KEY_REFRESH) - MATRIX_KEY(0x02, 0x02, KEY_ZOOM) - MATRIX_KEY(0x01, 0x02, KEY_SCALE) - MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) - MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) - MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) - MATRIX_KEY(0x02, 0x09, KEY_MUTE) - MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) - MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) - - CROS_STD_MAIN_KEYMAP - >; -}; - -&uart5 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - -&uart7 { - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; -}; - -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ - -&dp_hot_plug_det { - bias-disable; -}; - -&pcie1_clkreq_n { - bias-pull-up; - drive-strength = <2>; -}; - -&qspi_cs0 { - bias-disable; -}; - -&qspi_clk { - bias-disable; -}; - -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; -}; - -&qup_uart5_rx { - drive-strength = <2>; - bias-pull-up; -}; - -&qup_uart5_tx { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; -}; - -&qup_uart7_rts { - /* We'll drive RTS, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_tx { - /* We'll drive TX, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - bias-pull-up; -}; - -&sdc1_clk { - bias-disable; - drive-strength = <16>; -}; - -&sdc1_cmd { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc1_data { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc1_rclk { - bias-pull-down; -}; - -&sdc2_clk { - bias-disable; - drive-strength = <16>; -}; - -&sdc2_cmd { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc2_data { - bias-pull-up; - drive-strength = <10>; -}; - -/* PINCTRL - board-specific pinctrl */ - -&pm8350c_gpios { - gpio-line-names = "AP_SUSPEND", - "", - "", - "AP_BL_EN", - "", - "SD_CD_ODL", - "", - "", - "AP_BL_PWM"; - - ap_bl_en: ap-bl-en { - pins = "gpio4"; - function = "normal"; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-disable; - - /* Force backlight to be disabled to match state at boot. */ - output-low; - }; -}; - -&tlmm { - gpio-line-names = "HP_I2C_SDA", /* 0 */ - "HP_I2C_SCL", - "SSD_RST_L", - "PE_WAKE_ODL", - "AP_TP_I2C_SDA", - "AP_TP_I2C_SCL", - "UF_CAM_EN", - "WF_CAM_EN", - "AP_SAR_SENSOR_SDA", - "AP_SAR_SENSOR_SCL", - - "", /* 10 */ - "", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "AP_SPI_CLK", - "AP_SPI_CS0_L", - "", - "", - "EDP_HPD", - "", - - "UF_CAM_RST_L", /* 20 */ - "WF_CAM_RST_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "EN_PP3300_HUB", - "", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "BT_UART_CTS", - "BT_UART_RTS", - - "BT_UART_TXD", /* 30 */ - "BT_UART_RXD", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "", - "", - "", - "PEN_PDCT_L", - - "IO_BRD_ID0", /* 40 */ - "IO_BRD_ID1", - "EN_FP_RAILS", - "PEN_IRQ_L", - "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - - "AP_H1_SPI_CLK", /* 50 */ - "AP_H1_SPI_CS_L", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "H1_AP_INT_ODL", - "", - "LCM_RST_1V8_L", - "AMP_EN", - "", - "DP_HOT_PLUG_DET", - - "HUB_RST_L", /* 60 */ - "FP_TO_AP_IRQ_L", - "", - "", - "UF_CAM_MCLK", - "WF_CAM_MCLK", - "IO_BRD_ID2", - "EN_PP3300_CODEC", - "EC_IN_RW_ODL", - "UF_CAM_SDA", - - "UF_CAM_SCL", /* 70 */ - "WF_CAM_SDA", - "WF_CAM_SCL", - "AP_BRD_ID0", - "AP_BRD_ID1", - "AP_BRD_ID2", - "", - "FPMCU_BOOT0", - "FP_RST_L", - "PE_CLKREQ_ODL", - - "EN_EDP_PP3300", /* 80 */ - "TS_INT_L", - "FORCE_USB_BOOT", - "WCD_RST_L", - "WLAN_EN", - "BT_EN", - "WLAN_SW_CTRL", - "PCIE0_RESET_L", - "PCIE0_CLK_REQ_L", - "PCIE0_WAKE_L", - - "AS_EN", /* 90 */ - "SD_CD_ODL", - "", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "BT_WLAN_SB_CLK", - "BT_WLAN_SB_DATA", - "HP_MCLK", - "HP_BCLK", - "HP_DOUT", - "HP_DIN", - - "HP_LRCLK", /* 100 */ - "HP_IRQ", - "TP_INT_ODL", - "", - "IO_SKU_ID2", - "TS_RESET_L", - "AMP_BCLK", - "AMP_DIN", - "AMP_LRCLK", - "UIM2_DATA", - - "UIM2_CLK", /* 110 */ - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "RFFE0_CLK", - "RFFE0_DATA/BOOT_CONFIG_0", - "RFFE1_CLK", - - "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ - "RFFE2_CLK", - "RFFE2_DATA/BOOT_CONFIG_2", - "RFFE3_CLK", - "RFFE3_DATA/BOOT_CONFIG_3", - "RFFE4_CLK", - "RFFE4_DATA", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "IO_SKU_ID0", - - "IO_SKU_ID1", /* 130 */ - "", - "", - "QLINK0_REQ", - "QLINK0_EN", - "QLINK0_WMSS_RESET_L", - "QLINK1_REQ", - "QLINK1_EN", - "QLINK1_WMSS_RESET_L", - "FORCED_USB_BOOT_POL", - - "", /* 140 */ - "P_SENSOR_INT_L", - "AP_EC_INT_L", - "", - "WCD_SWR_TX_CLK", - "WCD_SWR_TX_DATA_0", - "WCD_SWR_TX_DATA_1", - "WCD_SWR_RX_CLK", - "WCD_SWR_RX_DATA_0", - "WCD_SWR_RX_DATA_1", - - "", /* 150 */ - "", - "", - "", - "", - "", - "", - "", - "WCD_SWR_TX_DATA_2", - "", - - "", /* 160 */ - "", - "", - "", - "", - "", - "", - "", - "", - "", - - "", /* 170 */ - "SENS_UART_TXD", - "SENS_UART_RXD", - "", - "", - ""; - - /* - * pinctrl settings for pins that have no real owners. - */ - pinctrl-names = "default"; - pinctrl-0 = <&bios_flash_wp_l>; - - amp_en: amp-en { - pins = "gpio57"; - function = "gpio"; - bias-pull-down; - }; - - ap_ec_int_l: ap-ec-int-l { - pins = "gpio142"; - input-enable; - bias-pull-up; - }; - - bios_flash_wp_l: bios-flash-wp-l { - pins = "gpio93"; - function = "gpio"; - input-enable; - bias-disable; - }; - - bt_en: bt-en { - pins = "gpio85"; - function = "gpio"; - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - en_fp_rails: en-fp-rails { - pins = "gpio42"; - drive-strength = <2>; - output-high; - bias-disable; - }; - - en_pp3300_codec: en-pp3300-codec { - pins = "gpio67"; - drive-strength = <2>; - bias-disable; - }; - - en_pp3300_dx_edp: en-pp3300-dx-edp { - pins = "gpio80"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - en_pp3300_hub: en-pp3300-hub { - pins = "gpio24"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - fp_to_ap_irq_l: fp-to-ap-irq-l { - pins = "gpio61"; - function = "gpio"; - input-enable; - /* Has external pullup */ - bias-disable; - }; - - h1_ap_int_odl: h1-ap-int-odl { - pins = "gpio54"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - - hp_irq: hp-irq { - pins = "gpio101"; - function = "gpio"; - bias-pull-up; - }; - - p_sensor_int_l: p-sensor-int-l { - pins = "gpio141"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - - pen_irq_l: pen-irq-l { - pins = "gpio43"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - pen_pdct_l: pen-pdct-l { - pins = "gpio39"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { - pins = "gpio35"; - output-high; - }; - - qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { - pins = "gpio47"; - output-high; - }; - - qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { - pins = "gpio51"; - output-high; - }; - - qup_uart7_sleep_cts: qup-uart7-sleep-cts { - pins = "gpio28"; - function = "gpio"; - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; - }; - - qup_uart7_sleep_rts: qup-uart7-sleep-rts { - pins = "gpio29"; - function = "gpio"; - /* - * Configure pull-down on RTS. As RTS is active low - * signal, pull it low to indicate the BT SoC that it - * can wakeup the system anytime from suspend state by - * pulling RX low (by sending wakeup bytes). - */ - bias-pull-down; - }; - - qup_uart7_sleep_rx: qup-uart7-sleep-rx { - pins = "gpio31"; - function = "gpio"; - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module - * is floating which may cause spurious wakeups. - */ - bias-pull-up; - }; - - qup_uart7_sleep_tx: qup-uart7-sleep-tx { - pins = "gpio30"; - function = "gpio"; - /* - * Configure pull-up on TX when it isn't actively driven - * to prevent BT SoC from receiving garbage during sleep. - */ - bias-pull-up; - }; - - sd_cd: sd-cd { - pins = "gpio91"; - function = "gpio"; - bias-pull-up; - }; - - tp_int_odl: tp-int-odl { - pins = "gpio102"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - ts_int_l: ts-int-l { - pins = "gpio81"; - function = "gpio"; - /* Has external pullup */ - bias-pull-up; - }; - - ts_reset_l: ts-reset-l { - pins = "gpio105"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - drive-strength = <2>; - }; - - uf_cam_en: uf-cam-en { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - wf_cam_en: wf-cam-en { - pins = "gpio7"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; -}; |