diff options
| -rwxr-xr-x | tools/testing/selftests/net/rtnetlink.sh | 962 |
1 files changed, 381 insertions, 581 deletions
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh index 488f4964365e..daaf1bcc10ac 100755 --- a/tools/testing/selftests/net/rtnetlink.sh +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -31,6 +31,7 @@ ALL_TESTS=" " devdummy="test-dummy0" +VERBOSE=0 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -51,35 +52,91 @@ check_fail() fi } +run_cmd_common() +{ + local cmd="$*" + local out + if [ "$VERBOSE" = "1" ]; then + echo "COMMAND: ${cmd}" + fi + out=$($cmd 2>&1) + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + fi + return $rc +} + +run_cmd() { + run_cmd_common "$@" + rc=$? + check_err $rc + return $rc +} +run_cmd_fail() +{ + run_cmd_common "$@" + rc=$? + check_fail $rc + return $rc +} + +run_cmd_grep_common() +{ + local find="$1"; shift + local cmd="$*" + local out + if [ "$VERBOSE" = "1" ]; then + echo "COMMAND: ${cmd} 2>&1 | grep -q '${find}'" + fi + out=$($cmd 2>&1 | grep -q "${find}" 2>&1) + return $? +} + +run_cmd_grep() { + run_cmd_grep_common "$@" + rc=$? + check_err $rc + return $rc +} + +run_cmd_grep_fail() +{ + run_cmd_grep_common "$@" + rc=$? + check_fail $rc + return $rc +} + +end_test() +{ + echo "$*" + [ "${VERBOSE}" = "1" ] && echo +} + + kci_add_dummy() { - ip link add name "$devdummy" type dummy - check_err $? - ip link set "$devdummy" up - check_err $? + run_cmd ip link add name "$devdummy" type dummy + run_cmd ip link set "$devdummy" up } kci_del_dummy() { - ip link del dev "$devdummy" - check_err $? + run_cmd ip link del dev "$devdummy" } kci_test_netconf() { dev="$1" r=$ret - - ip netconf show dev "$dev" > /dev/null - check_err $? - + run_cmd ip netconf show dev "$dev" for f in 4 6; do - ip -$f netconf show dev "$dev" > /dev/null - check_err $? + run_cmd ip -$f netconf show dev "$dev" done if [ $ret -ne 0 ] ;then - echo "FAIL: ip netconf show $dev" + end_test "FAIL: ip netconf show $dev" test $r -eq 0 && ret=0 return 1 fi @@ -92,43 +149,27 @@ kci_test_bridge() vlandev="testbr-vlan1" local ret=0 - ip link add name "$devbr" type bridge - check_err $? - - ip link set dev "$devdummy" master "$devbr" - check_err $? - - ip link set "$devbr" up - check_err $? - - ip link add link "$devbr" name "$vlandev" type vlan id 1 - check_err $? - ip addr add dev "$vlandev" 10.200.7.23/30 - check_err $? - ip -6 addr add dev "$vlandev" dead:42::1234/64 - check_err $? - ip -d link > /dev/null - check_err $? - ip r s t all > /dev/null - check_err $? + run_cmd ip link add name "$devbr" type bridge + run_cmd ip link set dev "$devdummy" master "$devbr" + run_cmd ip link set "$devbr" up + run_cmd ip link add link "$devbr" name "$vlandev" type vlan id 1 + run_cmd ip addr add dev "$vlandev" 10.200.7.23/30 + run_cmd ip -6 addr add dev "$vlandev" dead:42::1234/64 + run_cmd ip -d link + run_cmd ip r s t all for name in "$devbr" "$vlandev" "$devdummy" ; do kci_test_netconf "$name" done - - ip -6 addr del dev "$vlandev" dead:42::1234/64 - check_err $? - - ip link del dev "$vlandev" - check_err $? - ip link del dev "$devbr" - check_err $? + run_cmd ip -6 addr del dev "$vlandev" dead:42::1234/64 + run_cmd ip link del dev "$vlandev" + run_cmd ip link del dev "$devbr" if [ $ret -ne 0 ];then - echo "FAIL: bridge setup" + end_test "FAIL: bridge setup" return 1 fi - echo "PASS: bridge setup" + end_test "PASS: bridge setup" } @@ -139,34 +180,23 @@ kci_test_gre() loc=10.0.0.1 local ret=0 - ip tunnel add $gredev mode gre remote $rem local $loc ttl 1 - check_err $? - ip link set $gredev up - check_err $? - ip addr add 10.23.7.10 dev $gredev - check_err $? - ip route add 10.23.8.0/30 dev $gredev - check_err $? - ip addr add dev "$devdummy" 10.23.7.11/24 - check_err $? - ip link > /dev/null - check_err $? - ip addr > /dev/null - check_err $? + run_cmd ip tunnel add $gredev mode gre remote $rem local $loc ttl 1 + run_cmd ip link set $gredev up + run_cmd ip addr add 10.23.7.10 dev $gredev + run_cmd ip route add 10.23.8.0/30 dev $gredev + run_cmd ip addr add dev "$devdummy" 10.23.7.11/24 + run_cmd ip link + run_cmd ip addr kci_test_netconf "$gredev" - - ip addr del dev "$devdummy" 10.23.7.11/24 - check_err $? - - ip link del $gredev - check_err $? + run_cmd ip addr del dev "$devdummy" 10.23.7.11/24 + run_cmd ip link del $gredev if [ $ret -ne 0 ];then - echo "FAIL: gre tunnel endpoint" + end_test "FAIL: gre tunnel endpoint" return 1 fi - echo "PASS: gre tunnel endpoint" + end_test "PASS: gre tunnel endpoint" } # tc uses rtnetlink too, for full tc testing @@ -176,56 +206,40 @@ kci_test_tc() dev=lo local ret=0 - tc qdisc add dev "$dev" root handle 1: htb - check_err $? - tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit - check_err $? - tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256 - check_err $? - tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256 - check_err $? - tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256 - check_err $? - tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10 - check_err $? - tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10 - check_err $? - tc filter show dev "$dev" parent 1:0 > /dev/null - check_err $? - tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 - check_err $? - tc filter show dev "$dev" parent 1:0 > /dev/null - check_err $? - tc qdisc del dev "$dev" root handle 1: htb - check_err $? + run_cmd tc qdisc add dev "$dev" root handle 1: htb + run_cmd tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit + run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256 + run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256 + run_cmd tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256 + run_cmd tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10 + run_cmd tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10 + run_cmd tc filter show dev "$dev" parent 1:0 + run_cmd tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 + run_cmd tc filter show dev "$dev" parent 1:0 + run_cmd tc qdisc del dev "$dev" root handle 1: htb if [ $ret -ne 0 ];then - echo "FAIL: tc htb hierarchy" + end_test "FAIL: tc htb hierarchy" return 1 fi - echo "PASS: tc htb hierarchy" + end_test "PASS: tc htb hierarchy" } kci_test_polrouting() { local ret=0 - ip rule add fwmark 1 lookup 100 - check_err $? - ip route add local 0.0.0.0/0 dev lo table 100 - check_err $? - ip r s t all > /dev/null - check_err $? - ip rule del fwmark 1 lookup 100 - check_err $? - ip route del local 0.0.0.0/0 dev lo table 100 - check_err $? + run_cmd ip rule add fwmark 1 lookup 100 + run_cmd ip route add local 0.0.0.0/0 dev lo table 100 + run_cmd ip r s t all + run_cmd ip rule del fwmark 1 lookup 100 + run_cmd ip route del local 0.0.0.0/0 dev lo table 100 if [ $ret -ne 0 ];then - echo "FAIL: policy route test" + end_test "FAIL: policy route test" return 1 fi - echo "PASS: policy routing" + end_test "PASS: policy routing" } kci_test_route_get() @@ -233,65 +247,51 @@ kci_test_route_get() local hash_policy=$(sysctl -n net.ipv4.fib_multipath_hash_policy) local ret=0 - - ip route get 127.0.0.1 > /dev/null - check_err $? - ip route get 127.0.0.1 dev "$devdummy" > /dev/null - check_err $? - ip route get ::1 > /dev/null - check_err $? - ip route get fe80::1 dev "$devdummy" > /dev/null - check_err $? - ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x10 mark 0x1 > /dev/null - check_err $? - ip route get ::1 from ::1 iif lo oif lo tos 0x10 mark 0x1 > /dev/null - check_err $? - ip addr add dev "$devdummy" 10.23.7.11/24 - check_err $? - ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" > /dev/null - check_err $? - ip route add 10.23.8.0/24 \ + run_cmd ip route get 127.0.0.1 + run_cmd ip route get 127.0.0.1 dev "$devdummy" + run_cmd ip route get ::1 + run_cmd ip route get fe80::1 dev "$devdummy" + run_cmd ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x10 mark 0x1 + run_cmd ip route get ::1 from ::1 iif lo oif lo tos 0x10 mark 0x1 + run_cmd ip addr add dev "$devdummy" 10.23.7.11/24 + run_cmd ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" + run_cmd ip route add 10.23.8.0/24 \ nexthop via 10.23.7.13 dev "$devdummy" \ nexthop via 10.23.7.14 dev "$devdummy" - check_err $? + sysctl -wq net.ipv4.fib_multipath_hash_policy=0 - ip route get 10.23.8.11 > /dev/null - check_err $? + run_cmd ip route get 10.23.8.11 sysctl -wq net.ipv4.fib_multipath_hash_policy=1 - ip route get 10.23.8.11 > /dev/null - check_err $? + run_cmd ip route get 10.23.8.11 sysctl -wq net.ipv4.fib_multipath_hash_policy="$hash_policy" - ip route del 10.23.8.0/24 - check_err $? - ip addr del dev "$devdummy" 10.23.7.11/24 - check_err $? + run_cmd ip route del 10.23.8.0/24 + run_cmd ip addr del dev "$devdummy" 10.23.7.11/24 + if [ $ret -ne 0 ];then - echo "FAIL: route get" + end_test "FAIL: route get" return 1 fi - echo "PASS: route get" + end_test "PASS: route get" } kci_test_addrlft() { for i in $(seq 10 100) ;do lft=$(((RANDOM%3) + 1)) - ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1)) - check_err $? + run_cmd ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1)) done sleep 5 - - ip addr show dev "$devdummy" | grep "10.23.11." + run_cmd_grep "10.23.11." ip addr show dev "$devdummy" if [ $? -eq 0 ]; then - echo "FAIL: preferred_lft addresses remaining" + end_test "FAIL: preferred_lft addresses remaining" check_err 1 return fi - echo "PASS: preferred_lft addresses have expired" + end_test "PASS: preferred_lft addresses have expired" } kci_test_promote_secondaries() @@ -310,27 +310,17 @@ kci_test_promote_secondaries() [ $promote -eq 0 ] && sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=0 - echo "PASS: promote_secondaries complete" + end_test "PASS: promote_secondaries complete" } kci_test_addrlabel() { local ret=0 - - ip addrlabel add prefix dead::/64 dev lo label 1 - check_err $? - - ip addrlabel list |grep -q "prefix dead::/64 dev lo label 1" - check_err $? - - ip addrlabel del prefix dead::/64 dev lo label 1 2> /dev/null - check_err $? - - ip addrlabel add prefix dead::/64 label 1 2> /dev/null - check_err $? - - ip addrlabel del prefix dead::/64 label 1 2> /dev/null - check_err $? + run_cmd ip addrlabel add prefix dead::/64 dev lo label 1 + run_cmd_grep "prefix dead::/64 dev lo label 1" ip addrlabel list + run_cmd ip addrlabel del prefix dead::/64 dev lo label 1 + run_cmd ip addrlabel add prefix dead::/64 label 1 + run_cmd ip addrlabel del prefix dead::/64 label 1 # concurrent add/delete for i in $(seq 1 1000); do @@ -346,11 +336,11 @@ kci_test_addrlabel() ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null if [ $ret -ne 0 ];then - echo "FAIL: ipv6 addrlabel" + end_test "FAIL: ipv6 addrlabel" return 1 fi - echo "PASS: ipv6 addrlabel" + end_test "PASS: ipv6 addrlabel" } kci_test_ifalias() @@ -358,35 +348,28 @@ kci_test_ifalias() local ret=0 namewant=$(uuidgen) syspathname="/sys/class/net/$devdummy/ifalias" - - ip link set dev "$devdummy" alias "$namewant" - check_err $? + run_cmd ip link set dev "$devdummy" alias "$namewant" if [ $ret -ne 0 ]; then - echo "FAIL: cannot set interface alias of $devdummy to $namewant" + end_test "FAIL: cannot set interface alias of $devdummy to $namewant" return 1 fi - - ip link show "$devdummy" | grep -q "alias $namewant" - check_err $? + run_cmd_grep "alias $namewant" ip link show "$devdummy" if [ -r "$syspathname" ] ; then read namehave < "$syspathname" if [ "$namewant" != "$namehave" ]; then - echo "FAIL: did set ifalias $namewant but got $namehave" + end_test "FAIL: did set ifalias $namewant but got $namehave" return 1 fi namewant=$(uuidgen) echo "$namewant" > "$syspathname" - ip link show "$devdummy" | grep -q "alias $namewant" - check_err $? + run_cmd_grep "alias $namewant" ip link show "$devdummy" # sysfs interface allows to delete alias again echo "" > "$syspathname" - - ip link show "$devdummy" | grep -q "alias $namewant" - check_fail $? + run_cmd_grep_fail "alias $namewant" ip link show "$devdummy" for i in $(seq 1 100); do uuidgen > "$syspathname" & @@ -395,57 +378,48 @@ kci_test_ifalias() wait # re-add the alias -- kernel should free mem when dummy dev is removed - ip link set dev "$devdummy" alias "$namewant" - check_err $? + run_cmd ip link set dev "$devdummy" alias "$namewant" + fi if [ $ret -ne 0 ]; then - echo "FAIL: set interface alias $devdummy to $namewant" + end_test "FAIL: set interface alias $devdummy to $namewant" return 1 fi - echo "PASS: set ifalias $namewant for $devdummy" + end_test "PASS: set ifalias $namewant for $devdummy" } kci_test_vrf() { vrfname="test-vrf" local ret=0 - - ip link show type vrf 2>/dev/null + run_cmd ip link show type vrf if [ $? -ne 0 ]; then - echo "SKIP: vrf: iproute2 too old" + end_test "SKIP: vrf: iproute2 too old" return $ksft_skip fi - - ip link add "$vrfname" type vrf table 10 - check_err $? + run_cmd ip link add "$vrfname" type vrf table 10 if [ $ret -ne 0 ];then - echo "FAIL: can't add vrf interface, skipping test" + end_test "FAIL: can't add vrf interface, skipping test" return 0 fi - - ip -br link show type vrf | grep -q "$vrfname" - check_err $? + run_cmd_grep "$vrfname" ip -br link show type vrf if [ $ret -ne 0 ];then - echo "FAIL: created vrf device not found" + end_test "FAIL: created vrf device not found" return 1 fi - ip link set dev "$vrfname" up - check_err $? - - ip link set dev "$devdummy" master "$vrfname" - check_err $? - ip link del dev "$vrfname" - check_err $? + run_cmd ip link set dev "$vrfname" up + run_cmd ip link set dev "$devdummy" master "$vrfname" + run_cmd ip link del dev "$vrfname" if [ $ret -ne 0 ];then - echo "FAIL: vrf" + end_test "FAIL: vrf" return 1 fi - echo "PASS: vrf" + end_test "PASS: vrf" } kci_test_encap_vxlan() @@ -454,84 +428,44 @@ kci_test_encap_vxlan() vxlan="test-vxlan0" vlan="test-vlan0" testns="$1" - - ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \ - dev "$devdummy" dstport 4789 2>/dev/null + run_cmd ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \ + dev "$devdummy" dstport 4789 if [ $? -ne 0 ]; then - echo "FAIL: can't add vxlan interface, skipping test" + end_test "FAIL: can't add vxlan interface, skipping test" return 0 fi - check_err $? - - ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan" - check_err $? - ip -netns "$testns" link set up dev "$vxlan" - check_err $? - - ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1 - check_err $? + run_cmd ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan" + run_cmd ip -netns "$testns" link set up dev "$vxlan" + run_cmd ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1 # changelink testcases - ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy" 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64 - check_err $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning - check_err $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan proxy 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan norsc 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan external 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan gbp 2>/dev/null - check_fail $? - - ip -netns "$testns" link set dev "$vxlan" type vxlan gpe 2>/dev/null - check_fail $? - - ip -netns "$testns" link del "$vxlan" - check_err $? + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43 + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy" + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit + + run_cmd ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64 + run_cmd ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning + + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan proxy + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan norsc + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan external + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan gbp + run_cmd_fail ip -netns "$testns" link set dev "$vxlan" type vxlan gpe + run_cmd ip -netns "$testns" link del "$vxlan" if [ $ret -ne 0 ]; then - echo "FAIL: vxlan" + end_test "FAIL: vxlan" return 1 fi - echo "PASS: vxlan" + end_test "PASS: vxlan" } kci_test_encap_fou() @@ -539,39 +473,32 @@ kci_test_encap_fou() local ret=0 name="test-fou" testns="$1" - - ip fou help 2>&1 |grep -q 'Usage: ip fou' + run_cmd_grep 'Usage: ip fou' ip fou help if [ $? -ne 0 ];then - echo "SKIP: fou: iproute2 too old" + end_test "SKIP: fou: iproute2 too old" return $ksft_skip fi if ! /sbin/modprobe -q -n fou; then - echo "SKIP: module fou is not found" + end_test "SKIP: module fou is not found" return $ksft_skip fi /sbin/modprobe -q fou - ip -netns "$testns" fou add port 7777 ipproto 47 2>/dev/null + + run_cmd ip -netns "$testns" fou add port 7777 ipproto 47 if [ $? -ne 0 ];then - echo "FAIL: can't add fou port 7777, skipping test" + end_test "FAIL: can't add fou port 7777, skipping test" return 1 fi - - ip -netns "$testns" fou add port 8888 ipproto 4 - check_err $? - - ip -netns "$testns" fou del port 9999 2>/dev/null - check_fail $? - - ip -netns "$testns" fou del port 7777 - check_err $? - + run_cmd ip -netns "$testns" fou add port 8888 ipproto 4 + run_cmd_fail ip -netns "$testns" fou del port 9999 + run_cmd ip -netns "$testns" fou del port 7777 if [ $ret -ne 0 ]; then - echo "FAIL: fou" + end_test "FAIL: fou"s return 1 fi - echo "PASS: fou" + end_test "PASS: fou" } # test various encap methods, use netns to avoid unwanted interference @@ -579,25 +506,16 @@ kci_test_encap() { testns="testns" local ret=0 - - ip netns add "$testns" + run_cmd ip netns add "$testns" if [ $? -ne 0 ]; then - echo "SKIP encap tests: cannot add net namespace $testns" + end_test "SKIP encap tests: cannot add net namespace $testns" return $ksft_skip fi - - ip -netns "$testns" link set lo up - check_err $? - - ip -netns "$testns" link add name "$devdummy" type dummy - check_err $? - ip -netns "$testns" link set "$devdummy" up - check_err $? - - kci_test_encap_vxlan "$testns" - check_err $? - kci_test_encap_fou "$testns" - check_err $? + run_cmd ip -netns "$testns" link set lo up + run_cmd ip -netns "$testns" link add name "$devdummy" type dummy + run_cmd ip -netns "$testns" link set "$devdummy" up + run_cmd kci_test_encap_vxlan "$testns" + run_cmd kci_test_encap_fou "$testns" ip netns del "$testns" return $ret @@ -607,41 +525,28 @@ kci_test_macsec() { msname="test_macsec0" local ret=0 - - ip macsec help 2>&1 | grep -q "^Usage: ip macsec" + run_cmd_grep "^Usage: ip macsec" ip macsec help if [ $? -ne 0 ]; then - echo "SKIP: macsec: iproute2 too old" + end_test "SKIP: macsec: iproute2 too old" return $ksft_skip fi - - ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on - check_err $? + run_cmd ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on if [ $ret -ne 0 ];then - echo "FAIL: can't add macsec interface, skipping test" + end_test "FAIL: can't add macsec interface, skipping test" return 1 fi - - ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 - check_err $? - - ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" - check_err $? - - ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef - check_err $? - - ip macsec show > /dev/null - check_err $? - - ip link del dev "$msname" - check_err $? + run_cmd ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 + run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" + run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef + run_cmd ip macsec show + run_cmd ip link del dev "$msname" if [ $ret -ne 0 ];then - echo "FAIL: macsec" + end_test "FAIL: macsec" return 1 fi - echo "PASS: macsec" + end_test "PASS: macsec" } kci_test_macsec_offload() @@ -650,19 +555,18 @@ kci_test_macsec_offload() sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/ probed=false local ret=0 - - ip macsec help 2>&1 | grep -q "^Usage: ip macsec" + run_cmd_grep "^Usage: ip macsec" ip macsec help if [ $? -ne 0 ]; then - echo "SKIP: macsec: iproute2 too old" + end_test "SKIP: macsec: iproute2 too old" return $ksft_skip fi # setup netdevsim since dummydev doesn't have offload support if [ ! -w /sys/bus/netdevsim/new_device ] ; then - modprobe -q netdevsim - check_err $? + run_cmd modprobe -q netdevsim + if [ $ret -ne 0 ]; then - echo "SKIP: macsec_offload can't load netdevsim" + end_test "SKIP: macsec_offload can't load netdevsim" return $ksft_skip fi probed=true @@ -675,43 +579,25 @@ kci_test_macsec_offload() ip link set $dev up if [ ! -d $sysfsd ] ; then - echo "FAIL: macsec_offload can't create device $dev" + end_test "FAIL: macsec_offload can't create device $dev" return 1 fi - - ethtool -k $dev | grep -q 'macsec-hw-offload: on' + run_cmd_grep 'macsec-hw-offload: on' ethtool -k $dev if [ $? -eq 1 ] ; then - echo "FAIL: macsec_offload netdevsim doesn't support MACsec offload" + end_test "FAIL: macsec_offload netdevsim doesn't support MACsec offload" return 1 fi - - ip link add link $dev kci_macsec1 type macsec port 4 offload mac - check_err $? - - ip link add link $dev kci_macsec2 type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac - check_err $? - - ip link add link $dev kci_macsec3 type macsec sci abbacdde01020304 offload mac - check_err $? - - ip link add link $dev kci_macsec4 type macsec port 8 offload mac 2> /dev/null - check_fail $? + run_cmd ip link add link $dev kci_macsec1 type macsec port 4 offload mac + run_cmd ip link add link $dev kci_macsec2 type macsec address "aa:bb:cc:dd:ee:ff" port 5 offload mac + run_cmd ip link add link $dev kci_macsec3 type macsec sci abbacdde01020304 offload mac + run_cmd_fail ip link add link $dev kci_macsec4 type macsec port 8 offload mac msname=kci_macsec1 - - ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 - check_err $? - - ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" - check_err $? - - ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \ + run_cmd ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 + run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" + run_cmd ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on \ key 00 0123456789abcdef0123456789abcdef - check_err $? - - ip macsec add "$msname" rx port 1235 address "1c:ed:de:ad:be:ef" 2> /dev/null - check_fail $? - + run_cmd_fail ip macsec add "$msname" rx port 1235 address "1c:ed:de:ad:be:ef" # clean up any leftovers for msdev in kci_macsec{1,2,3,4} ; do ip link del $msdev 2> /dev/null @@ -720,10 +606,10 @@ kci_test_macsec_offload() $probed && rmmod netdevsim if [ $ret -ne 0 ]; then - echo "FAIL: macsec_offload" + end_test "FAIL: macsec_offload" return 1 fi - echo "PASS: macsec_offload" + end_test "PASS: macsec_offload" } #------------------------------------------------------------------- @@ -755,8 +641,7 @@ kci_test_ipsec() ip addr add $srcip dev $devdummy # flush to be sure there's nothing configured - ip x s flush ; ip x p flush - check_err $? + run_cmd ip x s flush ; ip x p flush # start the monitor in the background tmpfile=`mktemp /var/run/ipsectestXXX` @@ -764,72 +649,57 @@ kci_test_ipsec() sleep 0.2 ipsecid="proto esp src $srcip dst $dstip spi 0x07" - ip x s add $ipsecid \ + run_cmd ip x s add $ipsecid \ mode transport reqid 0x07 replay-window 32 \ $algo sel src $srcip/24 dst $dstip/24 - check_err $? - lines=`ip x s list | grep $srcip | grep $dstip | wc -l` - test $lines -eq 2 - check_err $? - ip x s count | grep -q "SAD count 1" - check_err $? + lines=`ip x s list | grep $srcip | grep $dstip | wc -l` + run_cmd test $lines -eq 2 + run_cmd_grep "SAD count 1" ip x s count lines=`ip x s get $ipsecid | grep $srcip | grep $dstip | wc -l` - test $lines -eq 2 - check_err $? - - ip x s delete $ipsecid - check_err $? + run_cmd test $lines -eq 2 + run_cmd ip x s delete $ipsecid lines=`ip x s list | wc -l` - test $lines -eq 0 - check_err $? + run_cmd test $lines -eq 0 ipsecsel="dir out src $srcip/24 dst $dstip/24" - ip x p add $ipsecsel \ + run_cmd ip x p add $ipsecsel \ tmpl proto esp src $srcip dst $dstip \ spi 0x07 mode transport reqid 0x07 - check_err $? + lines=`ip x p list | grep $srcip | grep $dstip | wc -l` - test $lines -eq 2 - check_err $? + run_cmd test $lines -eq 2 - ip x p count | grep -q "SPD IN 0 OUT 1 FWD 0" - check_err $? + run_cmd_grep "SPD IN 0 OUT 1 FWD 0" ip x p count lines=`ip x p get $ipsecsel | grep $srcip | grep $dstip | wc -l` - test $lines -eq 2 - check_err $? + run_cmd test $lines -eq 2 - ip x p delete $ipsecsel - check_err $? + run_cmd ip x p delete $ipsecsel lines=`ip x p list | wc -l` - test $lines -eq 0 - check_err $? + run_cmd test $lines -eq 0 # check the monitor results kill $mpid lines=`wc -l $tmpfile | cut "-d " -f1` - test $lines -eq 20 - check_err $? + run_cmd test $lines -eq 20 rm -rf $tmpfile # clean up any leftovers - ip x s flush - check_err $? - ip x p flush - check_err $? + run_cmd ip x s flush + run_cmd ip x p flush ip addr del $srcip/32 dev $devdummy if [ $ret -ne 0 ]; then - echo "FAIL: ipsec" + end_test "FAIL: ipsec" return 1 fi - echo "PASS: ipsec" + end_test "PASS: ipsec" } #------------------------------------------------------------------- @@ -857,10 +727,9 @@ kci_test_ipsec_offload() # setup netdevsim since dummydev doesn't have offload support if [ ! -w /sys/bus/netdevsim/new_device ] ; then - modprobe -q netdevsim - check_err $? + run_cmd modprobe -q netdevsim if [ $ret -ne 0 ]; then - echo "SKIP: ipsec_offload can't load netdevsim" + end_test "SKIP: ipsec_offload can't load netdevsim" return $ksft_skip fi probed=true @@ -874,11 +743,11 @@ kci_test_ipsec_offload() ip addr add $srcip dev $dev ip link set $dev up if [ ! -d $sysfsd ] ; then - echo "FAIL: ipsec_offload can't create device $dev" + end_test "FAIL: ipsec_offload can't create device $dev" return 1 fi if [ ! -f $sysfsf ] ; then - echo "FAIL: ipsec_offload netdevsim doesn't support IPsec offload" + end_test "FAIL: ipsec_offload netdevsim doesn't support IPsec offload" return 1 fi @@ -886,32 +755,31 @@ kci_test_ipsec_offload() ip x s flush ; ip x p flush # create offloaded SAs, both in and out - ip x p add dir out src $srcip/24 dst $dstip/24 \ + run_cmd ip x p add dir out src $srcip/24 dst $dstip/24 \ tmpl proto esp src $srcip dst $dstip spi 9 \ mode transport reqid 42 - check_err $? - ip x p add dir in src $dstip/24 dst $srcip/24 \ + + run_cmd ip x p add dir in src $dstip/24 dst $srcip/24 \ tmpl proto esp src $dstip dst $srcip spi 9 \ mode transport reqid 42 - check_err $? - ip x s add proto esp src $srcip dst $dstip spi 9 \ + run_cmd ip x s add proto esp src $srcip dst $dstip spi 9 \ mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \ offload dev $dev dir out - check_err $? - ip x s add proto esp src $dstip dst $srcip spi 9 \ + + run_cmd ip x s add proto esp src $dstip dst $srcip spi 9 \ mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \ offload dev $dev dir in - check_err $? + if [ $ret -ne 0 ]; then - echo "FAIL: ipsec_offload can't create SA" + end_test "FAIL: ipsec_offload can't create SA" return 1 fi # does offload show up in ip output lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"` if [ $lines -ne 2 ] ; then - echo "FAIL: ipsec_offload SA offload missing from list output" + end_test "FAIL: ipsec_offload SA offload missing from list output" check_err 1 fi @@ -919,7 +787,7 @@ kci_test_ipsec_offload() ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null # does driver have correct offload info - diff $sysfsf - << EOF + run_cmd diff $sysfsf - << EOF SA count=2 tx=3 sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000 sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 @@ -929,7 +797,7 @@ sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 sa[1] key=0x34333231 38373635 32313039 36353433 EOF if [ $? -ne 0 ] ; then - echo "FAIL: ipsec_offload incorrect driver data" + end_test "FAIL: ipsec_offload incorrect driver data" check_err 1 fi @@ -938,7 +806,7 @@ EOF ip x p flush lines=`grep -c "SA count=0" $sysfsf` if [ $lines -ne 1 ] ; then - echo "FAIL: ipsec_offload SA not removed from driver" + end_test "FAIL: ipsec_offload SA not removed from driver" check_err 1 fi @@ -947,10 +815,10 @@ EOF $probed && rmmod netdevsim if [ $ret -ne 0 ]; then - echo "FAIL: ipsec_offload" + end_test "FAIL: ipsec_offload" return 1 fi - echo "PASS: ipsec_offload" + end_test "PASS: ipsec_offload" } kci_test_gretap() @@ -959,46 +827,38 @@ kci_test_gretap() DEV_NS=gretap00 local ret=0 - ip netns add "$testns" + run_cmd ip netns add "$testns" if [ $? -ne 0 ]; then - echo "SKIP gretap tests: cannot add net namespace $testns" + end_test "SKIP gretap tests: cannot add net namespace $testns" return $ksft_skip fi - ip link help gretap 2>&1 | grep -q "^Usage:" + run_cmd_grep "^Usage:" ip link help gretap if [ $? -ne 0 ];then - echo "SKIP: gretap: iproute2 too old" + end_test "SKIP: gretap: iproute2 too old" ip netns del "$testns" return $ksft_skip fi # test native tunnel - ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \ + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \ key 102 local 172.16.1.100 remote 172.16.1.200 - check_err $? - - ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 - check_err $? - ip -netns "$testns" link set dev $DEV_NS up - check_err $? - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 + run_cmd ip -netns "$testns" link set dev $DEV_NS ups + run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode - ip -netns "$testns" link add dev "$DEV_NS" type gretap external - check_err $? - - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type gretap external + run_cmd ip -netns "$testns" link del "$DEV_NS" if [ $ret -ne 0 ]; then - echo "FAIL: gretap" + end_test "FAIL: gretap" ip netns del "$testns" return 1 fi - echo "PASS: gretap" + end_test "PASS: gretap" ip netns del "$testns" } @@ -1009,46 +869,38 @@ kci_test_ip6gretap() DEV_NS=ip6gretap00 local ret=0 - ip netns add "$testns" + run_cmd ip netns add "$testns" if [ $? -ne 0 ]; then - echo "SKIP ip6gretap tests: cannot add net namespace $testns" + end_test "SKIP ip6gretap tests: cannot add net namespace $testns" return $ksft_skip fi - ip link help ip6gretap 2>&1 | grep -q "^Usage:" + run_cmd_grep "^Usage:" ip link help ip6gretap if [ $? -ne 0 ];then - echo "SKIP: ip6gretap: iproute2 too old" + end_test "SKIP: ip6gretap: iproute2 too old" ip netns del "$testns" return $ksft_skip fi # test native tunnel - ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \ + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \ key 102 local fc00:100::1 remote fc00:100::2 - check_err $? - ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96 - check_err $? - ip -netns "$testns" link set dev $DEV_NS up - check_err $? - - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96 + run_cmd ip -netns "$testns" link set dev $DEV_NS up + run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode - ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external - check_err $? - - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external + run_cmd ip -netns "$testns" link del "$DEV_NS" if [ $ret -ne 0 ]; then - echo "FAIL: ip6gretap" + end_test "FAIL: ip6gretap" ip netns del "$testns" return 1 fi - echo "PASS: ip6gretap" + end_test "PASS: ip6gretap" ip netns del "$testns" } @@ -1058,62 +910,47 @@ kci_test_erspan() testns="testns" DEV_NS=erspan00 local ret=0 - - ip link help erspan 2>&1 | grep -q "^Usage:" + run_cmd_grep "^Usage:" ip link help erspan if [ $? -ne 0 ];then - echo "SKIP: erspan: iproute2 too old" + end_test "SKIP: erspan: iproute2 too old" return $ksft_skip fi - - ip netns add "$testns" + run_cmd ip netns add "$testns" if [ $? -ne 0 ]; then - echo "SKIP erspan tests: cannot add net namespace $testns" + end_test "SKIP erspan tests: cannot add net namespace $testns" return $ksft_skip fi # test native tunnel erspan v1 - ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \ + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \ key 102 local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 1 erspan 488 - check_err $? - ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 - check_err $? - ip -netns "$testns" link set dev $DEV_NS up - check_err $? - - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 + run_cmd ip -netns "$testns" link set dev $DEV_NS up + run_cmd ip -netns "$testns" link del "$DEV_NS" # test native tunnel erspan v2 - ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \ + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \ key 102 local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 2 erspan_dir ingress erspan_hwid 7 - check_err $? - - ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 - check_err $? - ip -netns "$testns" link set dev $DEV_NS up - check_err $? - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 + run_cmd ip -netns "$testns" link set dev $DEV_NS up + run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode - ip -netns "$testns" link add dev "$DEV_NS" type erspan external - check_err $? - - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type erspan external + run_cmd ip -netns "$testns" link del "$DEV_NS" if [ $ret -ne 0 ]; then - echo "FAIL: erspan" + end_test "FAIL: erspan" ip netns del "$testns" return 1 fi - echo "PASS: erspan" + end_test "PASS: erspan" ip netns del "$testns" } @@ -1123,63 +960,49 @@ kci_test_ip6erspan() testns="testns" DEV_NS=ip6erspan00 local ret=0 - - ip link help ip6erspan 2>&1 | grep -q "^Usage:" + run_cmd_grep "^Usage:" ip link help ip6erspan if [ $? -ne 0 ];then - echo "SKIP: ip6erspan: iproute2 too old" + end_test "SKIP: ip6erspan: iproute2 too old" return $ksft_skip fi - - ip netns add "$testns" + run_cmd ip netns add "$testns" if [ $? -ne 0 ]; then - echo "SKIP ip6erspan tests: cannot add net namespace $testns" + end_test "SKIP ip6erspan tests: cannot add net namespace $testns" return $ksft_skip fi # test native tunnel ip6erspan v1 - ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \ + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \ key 102 local fc00:100::1 remote fc00:100::2 \ erspan_ver 1 erspan 488 - check_err $? - ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 - check_err $? - ip -netns "$testns" link set dev $DEV_NS up - check_err $? - - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 + run_cmd ip -netns "$testns" link set dev $DEV_NS up + run_cmd ip -netns "$testns" link del "$DEV_NS" # test native tunnel ip6erspan v2 - ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \ + run_cmd ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \ key 102 local fc00:100::1 remote fc00:100::2 \ erspan_ver 2 erspan_dir ingress erspan_hwid 7 - check_err $? - ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 - check_err $? - - ip -netns "$testns" link set dev $DEV_NS up - check_err $? - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24 + run_cmd ip -netns "$testns" link set dev $DEV_NS up + run_cmd ip -netns "$testns" link del "$DEV_NS" # test external mode - ip -netns "$testns" link add dev "$DEV_NS" \ + run_cmd ip -netns "$testns" link add dev "$DEV_NS" \ type ip6erspan external - check_err $? - ip -netns "$testns" link del "$DEV_NS" - check_err $? + run_cmd ip -netns "$testns" link del "$DEV_NS" if [ $ret -ne 0 ]; then - echo "FAIL: ip6erspan" + end_test "FAIL: ip6erspan" ip netns del "$testns" return 1 fi - echo "PASS: ip6erspan" + end_test "PASS: ip6erspan" ip netns del "$testns" } @@ -1195,45 +1018,35 @@ kci_test_fdb_get() dstip="10.0.2.3" local ret=0 - bridge fdb help 2>&1 |grep -q 'bridge fdb get' + run_cmd_grep 'bridge fdb get' bridge fdb help if [ $? -ne 0 ];then - echo "SKIP: fdb get tests: iproute2 too old" + end_test "SKIP: fdb get tests: iproute2 too old" return $ksft_skip fi - ip netns add testns + run_cmd ip netns add testns if [ $? -ne 0 ]; then - echo "SKIP fdb get tests: cannot add net namespace $testns" + end_test "SKIP fdb get tests: cannot add net namespace $testns" return $ksft_skip fi - - $IP link add "$vxlandev" type vxlan id 10 local $localip \ - dstport 4789 2>/dev/null - check_err $? - $IP link add name "$brdev" type bridge &>/dev/null - check_err $? - $IP link set dev "$vxlandev" master "$brdev" &>/dev/null - check_err $? - $BRIDGE fdb add $test_mac dev "$vxlandev" master &>/dev/null - check_err $? - $BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self &>/dev/null - check_err $? - - $BRIDGE fdb get $test_mac brport "$vxlandev" 2>/dev/null | grep -q "dev $vxlandev master $brdev" - check_err $? - $BRIDGE fdb get $test_mac br "$brdev" 2>/dev/null | grep -q "dev $vxlandev master $brdev" - check_err $? - $BRIDGE fdb get $test_mac dev "$vxlandev" self 2>/dev/null | grep -q "dev $vxlandev dst $dstip" - check_err $? + run_cmd $IP link add "$vxlandev" type vxlan id 10 local $localip \ + dstport 4789 + run_cmd $IP link add name "$brdev" type bridge + run_cmd $IP link set dev "$vxlandev" master "$brdev" + run_cmd $BRIDGE fdb add $test_mac dev "$vxlandev" master + run_cmd $BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self + run_cmd_grep "dev $vxlandev master $brdev" $BRIDGE fdb get $test_mac brport "$vxlandev" + run_cmd_grep "dev $vxlandev master $brdev" $BRIDGE fdb get $test_mac br "$brdev" + run_cmd_grep "dev $vxlandev dst $dstip" $BRIDGE fdb get $test_mac dev "$vxlandev" self ip netns del testns &>/dev/null if [ $ret -ne 0 ]; then - echo "FAIL: bridge fdb get" + end_test "FAIL: bridge fdb get" return 1 fi - echo "PASS: bridge fdb get" + end_test "PASS: bridge fdb get" } kci_test_neigh_get() @@ -1243,50 +1056,38 @@ kci_test_neigh_get() dstip6=dead::2 local ret=0 - ip neigh help 2>&1 |grep -q 'ip neigh get' + run_cmd_grep 'ip neigh get' ip neigh help if [ $? -ne 0 ];then - echo "SKIP: fdb get tests: iproute2 too old" + end_test "SKIP: fdb get tests: iproute2 too old" return $ksft_skip fi # ipv4 - ip neigh add $dstip lladdr $dstmac dev "$devdummy" > /dev/null - check_err $? - ip neigh get $dstip dev "$devdummy" 2> /dev/null | grep -q "$dstmac" - check_err $? - ip neigh del $dstip lladdr $dstmac dev "$devdummy" > /dev/null - check_err $? + run_cmd ip neigh add $dstip lladdr $dstmac dev "$devdummy" + run_cmd_grep "$dstmac" ip neigh get $dstip dev "$devdummy" + run_cmd ip neigh del $dstip lladdr $dstmac dev "$devdummy" # ipv4 proxy - ip neigh add proxy $dstip dev "$devdummy" > /dev/null - check_err $? - ip neigh get proxy $dstip dev "$devdummy" 2>/dev/null | grep -q "$dstip" - check_err $? - ip neigh del proxy $dstip dev "$devdummy" > /dev/null - check_err $? + run_cmd ip neigh add proxy $dstip dev "$devdummy" + run_cmd_grep "$dstip" ip neigh get proxy $dstip dev "$devdummy" + run_cmd ip neigh del proxy $dstip dev "$devdummy" # ipv6 - ip neigh add $dstip6 lladdr $dstmac dev "$devdummy" > /dev/null - check_err $? - ip neigh get $dstip6 dev "$devdummy" 2> /dev/null | grep -q "$dstmac" - check_err $? - ip neigh del $dstip6 lladdr $dstmac dev "$devdummy" > /dev/null - check_err $? + run_cmd ip neigh add $dstip6 lladdr $dstmac dev "$devdummy" + run_cmd_grep "$dstmac" ip neigh get $dstip6 dev "$devdummy" + run_cmd ip neigh del $dstip6 lladdr $dstmac dev "$devdummy" # ipv6 proxy - ip neigh add proxy $dstip6 dev "$devdummy" > /dev/null - check_err $? - ip neigh get proxy $dstip6 dev "$devdummy" 2>/dev/null | grep -q "$dstip6" - check_err $? - ip neigh del proxy $dstip6 dev "$devdummy" > /dev/null - check_err $? + run_cmd ip neigh add proxy $dstip6 dev "$devdummy" + run_cmd_grep "$dstip6" ip neigh get proxy $dstip6 dev "$devdummy" + run_cmd ip neigh del proxy $dstip6 dev "$devdummy" if [ $ret -ne 0 ];then - echo "FAIL: neigh get" + end_test "FAIL: neigh get" return 1 fi - echo "PASS: neigh get" + end_test "PASS: neigh get" } kci_test_bridge_parent_id() @@ -1296,10 +1097,9 @@ kci_test_bridge_parent_id() probed=false if [ ! -w /sys/bus/netdevsim/new_device ] ; then - modprobe -q netdevsim - check_err $? + run_cmd modprobe -q netdevsim if [ $ret -ne 0 ]; then - echo "SKIP: bridge_parent_id can't load netdevsim" + end_test "SKIP: bridge_parent_id can't load netdevsim" return $ksft_skip fi probed=true @@ -1312,13 +1112,11 @@ kci_test_bridge_parent_id() udevadm settle dev10=`ls ${sysfsnet}10/net/` dev20=`ls ${sysfsnet}20/net/` - - ip link add name test-bond0 type bond mode 802.3ad - ip link set dev $dev10 master test-bond0 - ip link set dev $dev20 master test-bond0 - ip link add name test-br0 type bridge - ip link set dev test-bond0 master test-br0 - check_err $? + run_cmd ip link add name test-bond0 type bond mode 802.3ad + run_cmd ip link set dev $dev10 master test-bond0 + run_cmd ip link set dev $dev20 master test-bond0 + run_cmd ip link add name test-br0 type bridge + run_cmd ip link set dev test-bond0 master test-br0 # clean up any leftovers ip link del dev test-br0 @@ -1328,10 +1126,10 @@ kci_test_bridge_parent_id() $probed && rmmod netdevsim if [ $ret -ne 0 ]; then - echo "FAIL: bridge_parent_id" + end_test "FAIL: bridge_parent_id" return 1 fi - echo "PASS: bridge_parent_id" + end_test "PASS: bridge_parent_id" } address_get_proto() @@ -1409,10 +1207,10 @@ do_test_address_proto() ip address del dev "$devdummy" "$addr3" if [ $ret -ne 0 ]; then - echo "FAIL: address proto $what" + end_test "FAIL: address proto $what" return 1 fi - echo "PASS: address proto $what" + end_test "PASS: address proto $what" } kci_test_address_proto() @@ -1435,7 +1233,7 @@ kci_test_rtnl() kci_add_dummy if [ $ret -ne 0 ];then - echo "FAIL: cannot add dummy interface" + end_test "FAIL: cannot add dummy interface" return 1 fi @@ -1455,26 +1253,28 @@ usage: ${0##*/} OPTS -t <test> Test(s) to run (default: all) (options: $(echo $ALL_TESTS)) + -v Verbose mode (show commands and output) EOF } #check for needed privileges if [ "$(id -u)" -ne 0 ];then - echo "SKIP: Need root privileges" + end_test "SKIP: Need root privileges" exit $ksft_skip fi for x in ip tc;do $x -Version 2>/dev/null >/dev/null if [ $? -ne 0 ];then - echo "SKIP: Could not run test without the $x tool" + end_test "SKIP: Could not run test without the $x tool" exit $ksft_skip fi done -while getopts t:h o; do +while getopts t:hv o; do case $o in t) TESTS=$OPTARG;; + v) VERBOSE=1;; h) usage; exit 0;; *) usage; exit 1;; esac |