summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/mips/alchemy/devboards/pb1000/board_setup.c2
-rw-r--r--arch/mips/alchemy/devboards/pb1500/board_setup.c2
-rw-r--r--arch/mips/alchemy/mtx-1/board_setup.c2
-rw-r--r--arch/mips/alchemy/mtx-1/platform.c4
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1000.h27
-rw-r--r--arch/mips/include/asm/mach-au1x00/gpio-au1000.h71
-rw-r--r--drivers/mtd/nand/au1550nd.c3
-rw-r--r--drivers/watchdog/mtx-1_wdt.c21
8 files changed, 70 insertions, 62 deletions
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 2d85c4b5be09..e64fdcbf75d0 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -65,7 +65,7 @@ void __init board_setup(void)
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
- au_writel(0, SYS_PINSTATERD);
+ alchemy_gpio1_input_enable();
udelay(100);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 83f46215eb0c..3b4fa3206969 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -56,7 +56,7 @@ void __init board_setup(void)
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
- au_writel(0, SYS_PINSTATERD);
+ alchemy_gpio1_input_enable();
udelay(100);
/* GPIO201 is input for PCMCIA card detect */
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index cf436ab679ae..3ae984cf98cf 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -87,7 +87,7 @@ void __init board_setup(void)
au_writel(SYS_PF_NI2, SYS_PINFUNC);
/* Initialize GPIO */
- au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 956f946218c5..55628e390fd7 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -53,8 +53,8 @@ static struct platform_device mtx1_button = {
static struct resource mtx1_wdt_res[] = {
[0] = {
- .start = 15,
- .end = 15,
+ .start = 215,
+ .end = 215,
.name = "mtx1-wdt-gpio",
.flags = IORESOURCE_IRQ,
}
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 2dfff4f26512..f260ebed713b 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -702,7 +702,9 @@ enum soc_au1200_ints {
#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
+#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */
#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */
#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
@@ -717,7 +719,6 @@ enum soc_au1200_ints {
#define IRDA_PHYS_ADDR 0x10300000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
-#define SYS_PHYS_ADDR 0x11900000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
@@ -730,8 +731,6 @@ enum soc_au1200_ints {
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define USBH_PHYS_ADDR 0x10100000
#define PCI_PHYS_ADDR 0x14005000
-#define GPIO2_PHYS_ADDR 0x11700000
-#define SYS_PHYS_ADDR 0x11900000
#define PCI_MEM_PHYS_ADDR 0x400000000ULL
#define PCI_IO_PHYS_ADDR 0x500000000ULL
#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
@@ -750,8 +749,6 @@ enum soc_au1200_ints {
#define IRDA_PHYS_ADDR 0x10300000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
-#define GPIO2_PHYS_ADDR 0x11700000
-#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
@@ -765,8 +762,6 @@ enum soc_au1200_ints {
#define STATIC_MEM_PHYS_ADDR 0x14001000
#define USBH_PHYS_ADDR 0x14020000
#define PCI_PHYS_ADDR 0x14005000
-#define GPIO2_PHYS_ADDR 0x11700000
-#define SYS_PHYS_ADDR 0x11900000
#define PE_PHYS_ADDR 0x14008000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
@@ -790,8 +785,6 @@ enum soc_au1200_ints {
#define CIM_PHYS_ADDR 0x14004000
#define USBM_PHYS_ADDR 0x14020000
#define USBH_PHYS_ADDR 0x14020100
-#define GPIO2_PHYS_ADDR 0x11700000
-#define SYS_PHYS_ADDR 0x11900000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
#define LCD_PHYS_ADDR 0x15000000
@@ -1359,22 +1352,6 @@ enum soc_au1200_ints {
#define SYS_PINFUNC_S1B (1 << 2)
#endif
-#define SYS_TRIOUTRD 0xB1900100
-#define SYS_TRIOUTCLR 0xB1900100
-#define SYS_OUTPUTRD 0xB1900108
-#define SYS_OUTPUTSET 0xB1900108
-#define SYS_OUTPUTCLR 0xB190010C
-#define SYS_PINSTATERD 0xB1900110
-#define SYS_PININPUTEN 0xB1900110
-
-/* GPIO2, Au1500, Au1550 only */
-#define GPIO2_BASE 0xB1700000
-#define GPIO2_DIR (GPIO2_BASE + 0)
-#define GPIO2_OUTPUT (GPIO2_BASE + 8)
-#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
-#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
-#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
-
/* Power Management */
#define SYS_SCRATCH0 0xB1900018
#define SYS_SCRATCH1 0xB190001C
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 8f8c1c55593a..1f41a522906d 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -24,6 +24,22 @@
#define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off))
+/* GPIO1 registers within SYS_ area */
+#define SYS_TRIOUTRD 0x100
+#define SYS_TRIOUTCLR 0x100
+#define SYS_OUTPUTRD 0x108
+#define SYS_OUTPUTSET 0x108
+#define SYS_OUTPUTCLR 0x10C
+#define SYS_PINSTATERD 0x110
+#define SYS_PININPUTEN 0x110
+
+/* register offsets within GPIO2 block */
+#define GPIO2_DIR 0x00
+#define GPIO2_OUTPUT 0x08
+#define GPIO2_PINSTATE 0x0C
+#define GPIO2_INTENABLE 0x10
+#define GPIO2_ENABLE 0x14
+
struct gpio;
static inline int au1000_gpio1_to_irq(int gpio)
@@ -201,23 +217,26 @@ static inline int au1200_irq_to_gpio(int irq)
*/
static inline void alchemy_gpio1_set_value(int gpio, int v)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR;
- au_writel(mask, r);
- au_sync();
+ __raw_writel(mask, base + r);
+ wmb();
}
static inline int alchemy_gpio1_get_value(int gpio)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
- return au_readl(SYS_PINSTATERD) & mask;
+ return __raw_readl(base + SYS_PINSTATERD) & mask;
}
static inline int alchemy_gpio1_direction_input(int gpio)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE);
- au_writel(mask, SYS_TRIOUTCLR);
- au_sync();
+ __raw_writel(mask, base + SYS_TRIOUTCLR);
+ wmb();
return 0;
}
@@ -258,27 +277,31 @@ static inline int alchemy_gpio1_to_irq(int gpio)
*/
static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE);
- unsigned long d = au_readl(GPIO2_DIR);
+ unsigned long d = __raw_readl(base + GPIO2_DIR);
+
if (to_out)
d |= mask;
else
d &= ~mask;
- au_writel(d, GPIO2_DIR);
- au_sync();
+ __raw_writel(d, base + GPIO2_DIR);
+ wmb();
}
static inline void alchemy_gpio2_set_value(int gpio, int v)
{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
unsigned long mask;
mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE);
- au_writel(mask, GPIO2_OUTPUT);
- au_sync();
+ __raw_writel(mask, base + GPIO2_OUTPUT);
+ wmb();
}
static inline int alchemy_gpio2_get_value(int gpio)
{
- return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE));
}
static inline int alchemy_gpio2_direction_input(int gpio)
@@ -330,21 +353,23 @@ static inline int alchemy_gpio2_to_irq(int gpio)
*/
static inline void alchemy_gpio1_input_enable(void)
{
- au_writel(0, SYS_PININPUTEN); /* the write op is key */
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+ __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */
+ wmb();
}
/* GPIO2 shared interrupts and control */
static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
{
- unsigned long r = au_readl(GPIO2_INTENABLE);
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ unsigned long r = __raw_readl(base + GPIO2_INTENABLE);
if (en)
r |= 1 << gpio2;
else
r &= ~(1 << gpio2);
- au_writel(r, GPIO2_INTENABLE);
- au_sync();
+ __raw_writel(r, base + GPIO2_INTENABLE);
+ wmb();
}
/**
@@ -419,10 +444,11 @@ static inline void alchemy_gpio2_disable_int(int gpio2)
*/
static inline void alchemy_gpio2_enable(void)
{
- au_writel(3, GPIO2_ENABLE); /* reset, clock enabled */
- au_sync();
- au_writel(1, GPIO2_ENABLE); /* clock enabled */
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ __raw_writel(3, base + GPIO2_ENABLE); /* reset, clock enabled */
+ wmb();
+ __raw_writel(1, base + GPIO2_ENABLE); /* clock enabled */
+ wmb();
}
/**
@@ -432,8 +458,9 @@ static inline void alchemy_gpio2_enable(void)
*/
static inline void alchemy_gpio2_disable(void)
{
- au_writel(2, GPIO2_ENABLE); /* reset, clock disabled */
- au_sync();
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR);
+ __raw_writel(2, base + GPIO2_ENABLE); /* reset, clock disabled */
+ wmb();
}
/**********************************************************************/
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 3ffe05db4923..5d513b54a7d7 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -10,6 +10,7 @@
*/
#include <linux/slab.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -470,7 +471,7 @@ static int __init au1xxx_nand_init(void)
#ifdef CONFIG_MIPS_PB1550
/* set gpio206 high */
- au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
+ gpio_direction_input(206);
boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 5ec5ac1f7878..1479dc4d6129 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -66,6 +66,7 @@ static struct {
int default_ticks;
unsigned long inuse;
unsigned gpio;
+ int gstate;
} mtx1_wdt_device;
static void mtx1_wdt_trigger(unsigned long unused)
@@ -75,13 +76,13 @@ static void mtx1_wdt_trigger(unsigned long unused)
spin_lock(&mtx1_wdt_device.lock);
if (mtx1_wdt_device.running)
ticks--;
- /*
- * toggle GPIO2_15
- */
- tmp = au_readl(GPIO2_DIR);
- tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) |
- ((~tmp) & (1 << mtx1_wdt_device.gpio));
- au_writel(tmp, GPIO2_DIR);
+
+ /* toggle wdt gpio */
+ mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate;
+ if (mtx1_wdt_device.gstate)
+ gpio_direction_output(mtx1_wdt_device.gpio, 1);
+ else
+ gpio_direction_input(mtx1_wdt_device.gpio);
if (mtx1_wdt_device.queue && ticks)
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -103,7 +104,8 @@ static void mtx1_wdt_start(void)
spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
if (!mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 1;
- gpio_set_value(mtx1_wdt_device.gpio, 1);
+ mtx1_wdt_device.gstate = 1;
+ gpio_direction_output(mtx1_wdt_device.gpio, 1);
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
}
mtx1_wdt_device.running++;
@@ -117,7 +119,8 @@ static int mtx1_wdt_stop(void)
spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0;
- gpio_set_value(mtx1_wdt_device.gpio, 0);
+ mtx1_wdt_device.gstate = 0;
+ gpio_direction_output(mtx1_wdt_device.gpio, 0);
}
ticks = mtx1_wdt_device.default_ticks;
spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 20:47:42 +0100