diff options
| -rw-r--r-- | drivers/mmc/host/dw_mmc-exynos.c | 53 |
1 files changed, 52 insertions, 1 deletions
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index 6a1fa2110a05..2f28dd8098f9 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -30,6 +30,7 @@ #define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \ SDMMC_CLKSEL_CCLK_DRIVE(y) | \ SDMMC_CLKSEL_CCLK_DIVIDER(z)) +#define SDMMC_CLKSEL_WAKEUP_INT BIT(11) #define EXYNOS4210_FIXED_CIU_CLK_DIV 2 #define EXYNOS4412_FIXED_CIU_CLK_DIV 4 @@ -105,6 +106,49 @@ static int dw_mci_exynos_setup_clock(struct dw_mci *host) return 0; } +#ifdef CONFIG_PM_SLEEP +static int dw_mci_exynos_suspend(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + + return dw_mci_suspend(host); +} + +static int dw_mci_exynos_resume(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + + return dw_mci_resume(host); +} + +/** + * dw_mci_exynos_resume_noirq - Exynos-specific resume code + * + * On exynos5420 there is a silicon errata that will sometimes leave the + * WAKEUP_INT bit in the CLKSEL register asserted. This bit is 1 to indicate + * that it fired and we can clear it by writing a 1 back. Clear it to prevent + * interrupts from going off constantly. + * + * We run this code on all exynos variants because it doesn't hurt. + */ + +static int dw_mci_exynos_resume_noirq(struct device *dev) +{ + struct dw_mci *host = dev_get_drvdata(dev); + u32 clksel; + + clksel = mci_readl(host, CLKSEL); + if (clksel & SDMMC_CLKSEL_WAKEUP_INT) + mci_writel(host, CLKSEL, clksel); + + return 0; +} +#else +#define dw_mci_exynos_suspend NULL +#define dw_mci_exynos_resume NULL +#define dw_mci_exynos_resume_noirq NULL +#endif /* CONFIG_PM_SLEEP */ + static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr) { /* @@ -194,13 +238,20 @@ static int dw_mci_exynos_probe(struct platform_device *pdev) return dw_mci_pltfm_register(pdev, drv_data); } +const struct dev_pm_ops dw_mci_exynos_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(dw_mci_exynos_suspend, dw_mci_exynos_resume) + .resume_noirq = dw_mci_exynos_resume_noirq, + .thaw_noirq = dw_mci_exynos_resume_noirq, + .restore_noirq = dw_mci_exynos_resume_noirq, +}; + static struct platform_driver dw_mci_exynos_pltfm_driver = { .probe = dw_mci_exynos_probe, .remove = __exit_p(dw_mci_pltfm_remove), .driver = { .name = "dwmmc_exynos", .of_match_table = dw_mci_exynos_match, - .pm = &dw_mci_pltfm_pmops, + .pm = &dw_mci_exynos_pmops, }, }; |