diff options
Diffstat (limited to 'Documentation/devicetree/bindings/connector/usb-connector.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/connector/usb-connector.yaml | 46 |
1 files changed, 45 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index fb216ce68bb3..67700440e23b 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -253,6 +253,46 @@ properties: additionalProperties: false + sink-wait-cap-time-ms: + description: Represents the max time in ms that USB Type-C port (in sink + role) should wait for the port partner (source role) to send source caps. + SinkWaitCap timer starts when port in sink role attaches to the source. + This timer will stop when sink receives PD source cap advertisement before + timeout in which case it'll move to capability negotiation stage. A + timeout leads to a hard reset message by the port. + minimum: 310 + maximum: 620 + default: 310 + + ps-source-off-time-ms: + description: Represents the max time in ms that a DRP in source role should + take to turn off power after the PsSourceOff timer starts. PsSourceOff + timer starts when a sink's PHY layer receives EOP of the GoodCRC message + (corresponding to an Accept message sent in response to a PR_Swap or a + FR_Swap request). This timer stops when last bit of GoodCRC EOP + corresponding to the received PS_RDY message is transmitted by the PHY + layer. A timeout shall lead to error recovery in the type-c port. + minimum: 750 + maximum: 920 + default: 920 + + cc-debounce-time-ms: + description: Represents the max time in ms that a port shall wait to + determine if it's attached to a partner. + minimum: 100 + maximum: 200 + default: 200 + + sink-bc12-completion-time-ms: + description: Represents the max time in ms that a port in sink role takes + to complete Battery Charger (BC1.2) Detection. BC1.2 detection is a + hardware mechanism, which in some TCPC implementations, can run in + parallel once the Type-C connection state machine reaches the "potential + connect as sink" state. In TCPCs where this causes delays to respond to + the incoming PD messages, sink-bc12-completion-time-ms is used to delay + PD negotiation till BC1.2 detection completes. + default: 0 + dependencies: sink-vdos-v1: [ sink-vdos ] sink-vdos: [ sink-vdos-v1 ] @@ -380,7 +420,7 @@ examples: }; # USB-C connector attached to a typec port controller(ptn5110), which has - # power delivery support and enables drp. + # power delivery support, explicitly defines time properties and enables drp. - | #include <dt-bindings/usb/pd.h> typec: ptn5110 { @@ -393,6 +433,10 @@ examples: sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) PDO_VAR(5000, 12000, 2000)>; op-sink-microwatt = <10000000>; + sink-wait-cap-time-ms = <465>; + ps-source-off-time-ms = <835>; + cc-debounce-time-ms = <101>; + sink-bc12-completion-time-ms = <500>; }; }; |