diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml index c81285d84db7..79cb4b78a88a 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml @@ -26,16 +26,47 @@ properties: vdd-supply: true vss-supply: true + vcc-supply: + description: + Supply that powers the chip. + + iovcc-supply: + description: + Supply for the digital interface. + + vrefp-supply: + description: + Positive referance input voltage range. From 5v to (vdd - 2.5) + + vrefn-supply: + description: + Negative referance input voltage range. From (vss + 2.5) to 0. + adi,rbuf-gain2-en: description: Specify to allow an external amplifier to be connected in a gain of two configuration. type: boolean + reset-gpios: + maxItems: 1 + + clear-gpios: + maxItems: 1 + + ldac-gpios: + description: + LDAC pin to be used as a hardware trigger to update the DAC channels. + maxItems: 1 + required: - compatible - reg - vdd-supply - vss-supply + - vcc-supply + - iovcc-supply + - vrefp-supply + - vrefn-supply allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# @@ -44,6 +75,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -53,6 +85,13 @@ examples: reg = <0>; vss-supply = <&dac_vss>; vdd-supply = <&dac_vdd>; + vcc-supply = <&dac_vcc>; + iovcc-supply = <&dac_iovcc>; + vrefp-supply = <&dac_vrefp>; + vrefn-supply = <&dac_vrefn>; + reset-gpios = <&gpio_bd 16 GPIO_ACTIVE_LOW>; + clear-gpios = <&gpio_bd 17 GPIO_ACTIVE_LOW>; + ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_HIGH>; }; }; ... |