diff options
Diffstat (limited to 'Documentation/devicetree/bindings/sound/rt5640.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/sound/rt5640.txt | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt index 57fe64643050..e40e4893eed8 100644 --- a/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -22,6 +22,41 @@ Optional properties: - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using IN1P pin as dmic1 data pin + 2: using GPIO3 pin as dmic1 data pin + +- realtek,dmic2-data-pin + 0: dmic2 is not used + 1: using IN1N pin as dmic2 data pin + 2: using GPIO4 pin as dmic2 data pin + +- realtek,jack-detect-source + u32. Valid values: + 0: jack-detect is not used + 1: Use GPIO1 for jack-detect + 2: Use JD1_IN4P for jack-detect + 3: Use JD2_IN4N for jack-detect + 4: Use GPIO2 for jack-detect + 5: Use GPIO3 for jack-detect + 6: Use GPIO4 for jack-detect + +- realtek,jack-detect-not-inverted + bool. Normal jack-detect switches give an inverted signal, set this bool + in the rare case you've a jack-detect switch which is not inverted. + +- realtek,over-current-threshold-microamp + u32, micbias over-current detection threshold in µA, valid values are + 600, 1500 and 2000µA. + +- realtek,over-current-scale-factor + u32, micbias over-current detection scale-factor, valid values are: + 0: Scale current by 0.5 + 1: Scale current by 0.75 + 2: Scale current by 1.0 + 3: Scale current by 1.5 + Pins on the device (for linking into audio routes) for RT5639/RT5640: * DMIC1 |