diff options
Diffstat (limited to 'Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml | 55 |
1 files changed, 0 insertions, 55 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml b/Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml deleted file mode 100644 index 155dc7965e9b..000000000000 --- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml +++ /dev/null @@ -1,55 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/watchdog/gpio-wdt.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: GPIO controlled watchdog - -maintainers: - - Robert Marko <robert.marko@sartura.hr> - -properties: - compatible: - const: linux,wdt-gpio - - gpios: - maxItems: 1 - description: GPIO connected to the WDT reset pin - - hw_algo: - $ref: /schemas/types.yaml#/definitions/string - description: Algorithm used by the driver - oneOf: - - description: - Either a high-to-low or a low-to-high transition clears the WDT counter. - The watchdog timer is disabled when GPIO is left floating or connected - to a three-state buffer. - const: toggle - - description: - Low or high level starts counting WDT timeout, the opposite level - disables the WDT. - Active level is determined by the GPIO flags. - const: level - - hw_margin_ms: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Maximum time to reset watchdog circuit (in milliseconds) - minimum: 2 - maximum: 65535 - - always-running: - type: boolean - description: - If the watchdog timer cannot be disabled, add this flag to have the driver - keep toggling the signal without a client. - It will only cease to toggle the signal when the device is open and the - timeout elapsed. - -required: - - compatible - - gpios - - hw_algo - - hw_margin_ms - -unevaluatedProperties: false |