diff options
Diffstat (limited to 'Documentation/devicetree')
43 files changed, 187 insertions, 77 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 14cd727d3c4b..f02fd10de604 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -232,7 +232,6 @@ properties: by this cpu (see ./idle-states.yaml). capacity-dmips-mhz: - $ref: '/schemas/types.yaml#/definitions/uint32' description: u32 value representing CPU capacity (see ./cpu-capacity.txt) in DMIPS/MHz, relative to highest capacity-dmips-mhz diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index 02c21b584741..3bc760cc31cb 100644 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -40,7 +40,7 @@ Optional properties: documents on how to describe the way the sii902x device is connected to the rest of the audio system: Documentation/devicetree/bindings/sound/simple-card.yaml - Documentation/devicetree/bindings/sound/audio-graph-card.txt + Documentation/devicetree/bindings/sound/audio-graph-card.yaml Note: In case of the audio-graph-card binding the used port index should be 3. diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index 33977e15bebd..ed76332ec01e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -23,7 +23,7 @@ connected to. For a description of the display interface sink function blocks, see Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and -Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt. +Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml. Required properties (all function blocks): - compatible: "mediatek,<chip>-disp-<function>", one of @@ -61,7 +61,7 @@ Required properties (DMA function blocks): "mediatek,<chip>-disp-wdma" the supported chips are mt2701, mt8167 and mt8173. - larb: Should contain a phandle pointing to the local arbiter device as defined - in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml - iommus: Should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml index b15f68c499cb..df29d59d13a8 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The Block Copy DMA (BCDMA) is intended to perform similar functions as the TR diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml index b13ab60cd740..ea19d12a9337 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/dma/ti/k3-pktdma.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 DMSS PKTDMA Device Tree Bindings maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The Packet DMA (PKTDMA) is intended to perform similar functions as the packet diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml index 9a87fd9041eb..6a09bbf83d46 100644 --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The UDMA-P is intended to perform similar (but significantly upgraded) diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml index 5fe784f487c5..efdf59abb2e1 100644 --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -85,7 +85,6 @@ properties: wlf,micd-timeout-ms: description: Timeout for microphone detection, specified in milliseconds. - $ref: "/schemas/types.yaml#/definitions/uint32" wlf,micd-force-micbias: description: diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index eef614962b10..bf04151b63d2 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -49,7 +49,6 @@ properties: description: This property controls the Accumulation Dead band which allows to set the level of current below which no accumulation takes place. - $ref: /schemas/types.yaml#/definitions/uint32 maximum: 255 default: 0 diff --git a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml index 00a6511354e6..5d3ce641fcde 100644 --- a/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml +++ b/Documentation/devicetree/bindings/hwmon/baikal,bt1-pvt.yaml @@ -73,11 +73,9 @@ properties: description: | Temperature sensor trimming factor. It can be used to manually adjust the temperature measurements within 7.130 degrees Celsius. - maxItems: 1 - items: - default: 0 - minimum: 0 - maximum: 7130 + default: 0 + minimum: 0 + maximum: 7130 additionalProperties: false diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index 8020d739a078..1502b22c77cc 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -52,7 +52,6 @@ properties: ti,bus-range-microvolt: description: | This is the operating range of the bus voltage in microvolt - $ref: /schemas/types.yaml#/definitions/uint32 enum: [16000000, 32000000] default: 32000000 diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml index cc3aa2a5e70b..ff99344788ab 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml @@ -39,11 +39,9 @@ properties: i2c-gpio,delay-us: description: delay between GPIO operations (may depend on each platform) - $ref: /schemas/types.yaml#/definitions/uint32 i2c-gpio,timeout-ms: description: timeout to get data - $ref: /schemas/types.yaml#/definitions/uint32 # Deprecated properties, do not use in new device tree sources: gpios: diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml index c22b66b6219e..d9293c57f573 100644 --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -66,21 +66,18 @@ properties: default: 400000 i2c-sda-hold-time-ns: - maxItems: 1 description: | The property should contain the SDA hold time in nanoseconds. This option is only supported in hardware blocks version 1.11a or newer or on Microsemi SoCs. i2c-scl-falling-time-ns: - maxItems: 1 description: | The property should contain the SCL falling time in nanoseconds. This value is used to compute the tLOW period. default: 300 i2c-sda-falling-time-ns: - maxItems: 1 description: | The property should contain the SDA falling time in nanoseconds. This value is used to compute the tHIGH period. diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml index 6eef3480ea8f..c2efbb813ca2 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -16,8 +16,8 @@ description: properties: compatible: enum: - - bosch,bmc150 - - bosch,bmi055 + - bosch,bmc150_accel + - bosch,bmi055_accel - bosch,bma255 - bosch,bma250e - bosch,bma222 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index e0cc3b2e8957..22b7ed3723f6 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -80,7 +80,7 @@ properties: type: boolean bipolar: - description: see Documentation/devicetree/bindings/iio/adc/adc.txt + description: see Documentation/devicetree/bindings/iio/adc/adc.yaml type: boolean required: diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml index 9475a9e6e920..95774a55629d 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml @@ -23,7 +23,6 @@ properties: maxItems: 1 shunt-resistor-micro-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: | Value in micro Ohms of the shunt resistor connected between the RS+ and RS- inputs, across which the current is measured. Value needed to compute diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 28417b31b558..517e32976c30 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -246,7 +246,6 @@ patternProperties: Resolution (bits) to use for conversions: - can be 6, 8, 10 or 12 on stm32f4 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 - $ref: /schemas/types.yaml#/definitions/uint32 st,adc-channels: description: | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml index 692dacd0fee5..7b895784e008 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml @@ -42,7 +42,6 @@ properties: const: 1 ti,channel0-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Channel 0 current in uA. enum: - 0 @@ -51,7 +50,6 @@ properties: - 20 ti,channel3-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Channel 3 current in uA. enum: - 0 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index 626ccb6fe21e..fd4edca34a28 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -46,31 +46,42 @@ properties: two properties must be present: adi,range-microvolt: - $ref: /schemas/types.yaml#/definitions/int32-array description: | Voltage output range specified as <minimum, maximum> - enum: - - [[0, 5000000]] - - [[0, 10000000]] - - [[-5000000, 5000000]] - - [[-10000000, 10000000]] + oneOf: + - items: + - const: 0 + - enum: [5000000, 10000000] + - items: + - const: -5000000 + - const: 5000000 + - items: + - const: -10000000 + - const: 10000000 adi,range-microamp: - $ref: /schemas/types.yaml#/definitions/int32-array description: | Current output range specified as <minimum, maximum> - enum: - - [[0, 20000]] - - [[0, 24000]] - - [[4, 24000]] - - [[-20000, 20000]] - - [[-24000, 24000]] - - [[-1000, 22000]] + oneOf: + - items: + - const: 0 + - enum: [20000, 24000] + - items: + - const: 4 + - const: 24000 + - items: + - const: -20000 + - const: 20000 + - items: + - const: -24000 + - const: 24000 + - items: + - const: -1000 + - const: 22000 reset-gpios: true adi,dc-dc-ilim-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 enum: [150000, 200000, 250000, 300000, 350000, 400000] description: | The dc-to-dc converter current limit. diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml index 64b862637039..967778fb0ce8 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml @@ -21,7 +21,6 @@ properties: description: Connected to ADC_RDY pin. maxim,led-current-microamp: - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 description: | diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index a771a15f053f..046ace461cc9 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -70,11 +70,9 @@ properties: touchscreen-x-mm: description: horizontal length in mm of the touchscreen - $ref: /schemas/types.yaml#/definitions/uint32 touchscreen-y-mm: description: vertical length in mm of the touchscreen - $ref: /schemas/types.yaml#/definitions/uint32 dependencies: touchscreen-size-x: [ touchscreen-size-y ] diff --git a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml new file mode 100644 index 000000000000..68c328eec03b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT8515 1.5A dual channel LED driver + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + The Richtek RT8515 is a dual channel (two mode) LED driver that + supports driving a white LED in flash or torch mode. The maximum + current for each mode is defined in hardware using two resistors + RFS and RTS. + +properties: + compatible: + const: richtek,rt8515 + + enf-gpios: + maxItems: 1 + description: A connection to the 'ENF' (enable flash) pin. + + ent-gpios: + maxItems: 1 + description: A connection to the 'ENT' (enable torch) pin. + + richtek,rfs-ohms: + minimum: 7680 + maximum: 367000 + description: The resistance value of the RFS resistor. This + resistors limits the maximum flash current. This must be set + for the property flash-max-microamp to work, the RFS resistor + defines the range of the dimmer setting (brightness) of the + flash LED. + + richtek,rts-ohms: + minimum: 7680 + maximum: 367000 + description: The resistance value of the RTS resistor. This + resistors limits the maximum torch current. This must be set + for the property torch-max-microamp to work, the RTS resistor + defines the range of the dimmer setting (brightness) of the + torch LED. + + led: + type: object + $ref: common.yaml# + properties: + function: true + color: true + flash-max-timeout-us: true + + flash-max-microamp: + maximum: 700000 + description: The maximum current for flash mode + is hardwired to the component using the RFS resistor to + ground. The maximum hardware current setting is calculated + according to the formula Imax = 5500 / RFS. The lowest + allowed resistance value is 7.86 kOhm giving an absolute + maximum current of 700mA. By setting this attribute in + the device tree, you can further restrict the maximum + current below the hardware limit. This requires the RFS + to be defined as it defines the maximum range. + + led-max-microamp: + maximum: 700000 + description: The maximum current for torch mode + is hardwired to the component using the RTS resistor to + ground. The maximum hardware current setting is calculated + according to the formula Imax = 5500 / RTS. The lowest + allowed resistance value is 7.86 kOhm giving an absolute + maximum current of 700mA. By setting this attribute in + the device tree, you can further restrict the maximum + current below the hardware limit. This requires the RTS + to be defined as it defines the maximum range. + + additionalProperties: false + +required: + - compatible + - ent-gpios + - enf-gpios + - led + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + led-controller { + compatible = "richtek,rt8515"; + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <150000>; + led-max-microamp = <25000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt index 044b11913c49..cf60c5acc0e4 100644 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt @@ -16,7 +16,7 @@ Required properties: - power-domains: a phandle to the power domain, see Documentation/devicetree/bindings/power/power_domain.txt for details. - mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. - iommus: should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt index 736be7cad385..acfb50375b8a 100644 --- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt @@ -14,7 +14,7 @@ Required properties: - power-domains: a phandle to the power domain, see Documentation/devicetree/bindings/power/power_domain.txt for details. - mediatek,larb: must contain the local arbiters in the current SoCs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. - iommus: should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt index 0d03e3ae2be2..f4798d04e925 100644 --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt +++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt @@ -28,7 +28,7 @@ Required properties (DMA function blocks, child node): argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. - mediatek,larb: must contain the local arbiters in the current Socs, see - Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml for details. Example: diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 186f04ba9357..e674bba52ee9 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -259,7 +259,6 @@ properties: waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. - $ref: /schemas/types.yaml#/definitions/uint32 default: 10 supports-cqe: diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml index 6cd57863c1db..226fb191913d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml @@ -41,13 +41,11 @@ properties: description: Delay in ms after powering the card and de-asserting the reset-gpios (if any). - $ref: /schemas/types.yaml#/definitions/uint32 power-off-delay-us: description: Delay in us after asserting the reset-gpios (if any) during power off of the card. - $ref: /schemas/types.yaml#/definitions/uint32 required: - compatible diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 0965f6515f9e..dac4aadb6e2e 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -122,7 +122,6 @@ properties: such as flow control thresholds. rx-internal-delay-ps: - $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Receive Clock Delay defined in pico seconds. This is used for controllers that have configurable RX internal delays. @@ -140,7 +139,6 @@ properties: is used for components that can have configurable fifo sizes. tx-internal-delay-ps: - $ref: /schemas/types.yaml#/definitions/uint32 description: | RGMII Transmit Clock Delay defined in pico seconds. This is used for controllers that have configurable TX internal delays. diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index 244befb6402a..de9dd574a2f9 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -163,6 +163,7 @@ allOf: enum: - renesas,etheravb-r8a774a1 - renesas,etheravb-r8a774b1 + - renesas,etheravb-r8a774e1 - renesas,etheravb-r8a7795 - renesas,etheravb-r8a7796 - renesas,etheravb-r8a77961 diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index b2f6083f556a..0642b0f59491 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -161,7 +161,8 @@ properties: * snps,route-dcbcp, DCB Control Packets * snps,route-up, Untagged Packets * snps,route-multi-broad, Multicast & Broadcast Packets - * snps,priority, RX queue priority (Range 0x0 to 0xF) + * snps,priority, bitmask of the tagged frames priorities assigned to + the queue snps,mtl-tx-config: $ref: /schemas/types.yaml#/definitions/phandle @@ -188,7 +189,10 @@ properties: * snps,idle_slope, unlock on WoL * snps,high_credit, max write outstanding req. limit * snps,low_credit, max read outstanding req. limit - * snps,priority, TX queue priority (Range 0x0 to 0xF) + * snps,priority, bitmask of the priorities assigned to the queue. + When a PFC frame is received with priorities matching the bitmask, + the queue is blocked from transmitting for the pause time specified + in the PFC frame. snps,reset-gpio: deprecated: true @@ -208,7 +212,6 @@ properties: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. - $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 3 maxItems: 3 diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml index 0c7e2e44793b..c3b4b7543591 100644 --- a/Documentation/devicetree/bindings/power/supply/battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml @@ -83,21 +83,18 @@ properties: for each of the battery capacity lookup table. operating-range-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: operating temperature range of a battery items: - description: minimum temperature at which battery can operate - description: maximum temperature at which battery can operate ambient-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: safe range of ambient temperature items: - description: alert when ambient temperature is lower than this value - description: alert when ambient temperature is higher than this value alert-celsius: - $ref: /schemas/types.yaml#/definitions/uint32-array description: safe range of battery temperature items: - description: alert when battery temperature is lower than this value diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml index 75a56773be4a..813d6afde606 100644 --- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml @@ -50,7 +50,6 @@ properties: maxItems: 1 input-current-limit-microamp: - $ref: /schemas/types.yaml#/definitions/uint32 description: Maximum input current in micro Amps. minimum: 50000 maximum: 500000 diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml index 6f2164f7bc57..228018c87bea 100644 --- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml @@ -62,7 +62,6 @@ properties: description: IRQ line information. dlg,irq-polling-delay-passive-ms: - $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 1000 maximum: 10000 description: | diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index d3d0dc13dd8b..8850c01bd470 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -72,11 +72,9 @@ properties: startup-delay-us: description: startup time in microseconds - $ref: /schemas/types.yaml#/definitions/uint32 off-on-delay-us: description: off delay time in microseconds - $ref: /schemas/types.yaml#/definitions/uint32 enable-active-high: description: diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml index a6c259ce9785..956156fe52a3 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -19,7 +19,9 @@ description: | properties: compatible: enum: - - nxp,pf8x00 + - nxp,pf8100 + - nxp,pf8121a + - nxp,pf8200 reg: maxItems: 1 @@ -118,7 +120,7 @@ examples: #size-cells = <0>; pmic@8 { - compatible = "nxp,pf8x00"; + compatible = "nxp,pf8100"; reg = <0x08>; regulators { diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index b8f0b7809c02..7d462b899473 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -44,6 +44,7 @@ First Level Nodes - PMIC Definition: Must be one of below: "qcom,pm8005-rpmh-regulators" "qcom,pm8009-rpmh-regulators" + "qcom,pm8009-1-rpmh-regulators" "qcom,pm8150-rpmh-regulators" "qcom,pm8150l-rpmh-regulators" "qcom,pm8350-rpmh-regulators" diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index d30dc045aac6..0ec3551f12dd 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -27,7 +27,6 @@ properties: 1: chargeable quartz-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 description: The capacitive load of the quartz(x-tal), expressed in femto Farad (fF). The default value shall be listed (if optional), @@ -47,7 +46,6 @@ properties: deprecated: true trickle-resistor-ohms: - $ref: /schemas/types.yaml#/definitions/uint32 description: Selected resistor for trickle charger. Should be given if trickle charger should be enabled. diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml index c23c93b400f0..07fa6d26f2b4 100644 --- a/Documentation/devicetree/bindings/serial/pl011.yaml +++ b/Documentation/devicetree/bindings/serial/pl011.yaml @@ -88,14 +88,12 @@ properties: description: Rate at which poll occurs when auto-poll is set. default 100ms. - $ref: /schemas/types.yaml#/definitions/uint32 default: 100 poll-timeout-ms: description: Poll timeout when auto-poll is set, default 3000ms. - $ref: /schemas/types.yaml#/definitions/uint32 default: 3000 required: diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml index bf8c8ba25009..54650823b29a 100644 --- a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml +++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Mediatek MT8192 with MT6359, RT1015 and RT5682 ASoC sound card driver maintainers: - - Jiaxin Yu <jiaxin.yu@mediatek.com> - - Shane Chien <shane.chien@mediatek.com> + - Jiaxin Yu <jiaxin.yu@mediatek.com> + - Shane Chien <shane.chien@mediatek.com> description: This binding describes the MT8192 sound card. diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml index d116c174b545..70b4a8831073 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml +++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml @@ -41,14 +41,12 @@ properties: values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not mentioned or if the value is unknown, then micbias resistor is set to 4k. - $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 0, 2, 4, 8 ] micbias-voltage-m-volts: description: The bias voltage to be used in mVolts. The voltage can take values from 1.25V to 3V by 250mV steps. If this node is not mentioned or the value is unknown, then the value is set to 1.25V. - $ref: "/schemas/types.yaml#/definitions/uint32" enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ] lrclk-strength: diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml index 805da4d6a88e..ec06789b21df 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/sound/ti,j721e-cpb-audio.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments J721e Common Processor Board Audio Support maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The audio support on the board is using pcm3168a codec connected to McASP10 diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml index bb780f621628..ee9f960de36b 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -1,4 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +# Author: Peter Ujfalusi <peter.ujfalusi@ti.com> %YAML 1.2 --- $id: http://devicetree.org/schemas/sound/ti,j721e-cpb-ivi-audio.yaml# @@ -7,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments J721e Common Processor Board Audio Support maintainers: - - Peter Ujfalusi <peter.ujfalusi@ti.com> + - Peter Ujfalusi <peter.ujfalusi@gmail.com> description: | The Infotainment board plugs into the Common Processor Board, the support of the diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml index 388245b91a55..c80a83571919 100644 --- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml @@ -11,12 +11,18 @@ maintainers: properties: compatible: - items: + oneOf: - const: ti,j721e-usb + - const: ti,am64-usb + - items: + - const: ti,j721e-usb + - const: ti,am64-usb reg: description: module registers + ranges: true + power-domains: description: PM domain provider node and an args specifier containing @@ -58,6 +64,8 @@ properties: '#size-cells': const: 2 + dma-coherent: true + patternProperties: "^usb@": type: object diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index 4e2c26cd981d..e3dfb02f0ca5 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -19,7 +19,6 @@ properties: pattern: "^watchdog(@.*|-[0-9a-f])?$" timeout-sec: - $ref: /schemas/types.yaml#/definitions/uint32 description: Contains the watchdog timeout in seconds. |