diff options
Diffstat (limited to 'Documentation/isdn/README.syncppp')
| -rw-r--r-- | Documentation/isdn/README.syncppp | 58 |
1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/isdn/README.syncppp b/Documentation/isdn/README.syncppp deleted file mode 100644 index 27d260095cce..000000000000 --- a/Documentation/isdn/README.syncppp +++ /dev/null @@ -1,58 +0,0 @@ -Some additional information for setting up a syncPPP -connection using network interfaces. ---------------------------------------------------------------- - -You need one thing beside the isdn4linux package: - - a patched pppd .. (I called it ipppd to show the difference) - -Compiling isdn4linux with sync PPP: ------------------------------------ -To compile isdn4linux with the sync PPP part, you have -to answer the appropriate question when doing a "make config" -Don't forget to load the slhc.o -module before the isdn.o module, if VJ-compression support -is not compiled into your kernel. (e.g if you have no PPP or -CSLIP in the kernel) - -Using isdn4linux with sync PPP: -------------------------------- -Sync PPP is just another encapsulation for isdn4linux. The -name to enable sync PPP encapsulation is 'syncppp' .. e.g: - - /sbin/isdnctrl encap ippp0 syncppp - -The name of the interface is here 'ippp0'. You need -one interface with the name 'ippp0' to saturate the -ipppd, which checks the ppp version via this interface. -Currently, all devices must have the name ipppX where -'X' is a decimal value. - -To set up a PPP connection you need the ipppd .. You must start -the ipppd once after installing the modules. The ipppd -communicates with the isdn4linux link-level driver using the -/dev/ippp0 to /dev/ippp15 devices. One ipppd can handle -all devices at once. If you want to use two PPP connections -at the same time, you have to connect the ipppd to two -devices .. and so on. -I've implemented one additional option for the ipppd: - 'useifip' will get (if set to not 0.0.0.0) the IP address - for the negotiation from the attached network-interface. -(also: ipppd will try to negotiate pointopoint IP as remote IP) -You must disable BSD-compression, this implementation can't -handle compressed packets. - -Check the etc/rc.isdn.syncppp in the isdn4kernel-util package -for an example setup script. - -To use the MPPP stuff, you must configure a slave device -with isdn4linux. Now call the ipppd with the '+mp' option. -To increase the number of links, you must use the -'addlink' option of the isdnctrl tool. (rc.isdn.syncppp.MPPP is -an example script) - -enjoy it, - michael - - - |